检索结果-内蒙古大学图书馆

intelligent Communication, Sensing and Electromagnetics (ICSE), International Conference on

作者： Heng Du Huaiming Cang Yiwen Bai Xinyi Wang Beijing Elephant Technology Co. Ltd Beijing China School of Transportation Science and Engineering Beihang University Beijing China The State Key Lab of Intelligent Transportation System Beijing China Tianjin Key Laboratory for Advanced Mechanical System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology) Tianjin China

ISBN: (数字)9798350354935

ISBN: (纸本)9798350354942

In the field of railway transportation, with the continuous improvement of train running speed and the continuous increase of operating mileage, it becomes particularly important to ensure the safety and integrity of small-target infrastructure along the railway train. Although many small-target detection methods have been proposed, the research on small-target infrastructure detection along rail trains is very rare. To solve this problem, this paper proposes a small-target infrastructure detection network with spatial tracking and multi-level feature extraction based on Yolov8n. The experimental results show that ST-YOLO has a 3.6% mAP improvement on the OSDaR23 dataset compared to the baseline Yolov8n, and shows significant advantages over other state-of-the-art methods.

关键词： Rails Transportation Railway safety Switches Feature extraction Rail transportation Real-time systems Sensors Safety Monitoring

来源：评论

学校读者我要写书评

暂无评论

Rapid Response and Recovery Performance of NO2 Gas Sensor Based on Gan Hexagonal Pits at Room Temperature

SSRN

引用

SSRN 2022年

作者： Han, Xiaomei Han, Dan Liu, Xiaoru Chen, Yi Liu, Lulu Liu, Zhihua Li, Donghui Sang, Shengbo Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception College of Information and Computer Taiyuan University of Technology Taiyuan030024 China Key Lab of Advanced Transducers and Intelligent Control System The Ministry of Education Taiyuan University of Technology Taiyuan030024 China Key Laboratory of Interface Science and Engineering in Advanced Materials Taiyuan University of Technology Ministry of Education Taiyuan030024 China

Although fantastic milestones of Gallium nitride (GaN)-based materials in optoelectronic devices had been reached, the focus on the optimization of their geometrical structure for gas-sensing applications was relatively scarce. In this work, we demonstrated NO2 gas sensor based on p-type GaN hexagonal pits (GaN-HP) with high surface-to-volume ratio by wet etching method. The fabricated NO2 gas sensor had high sensitivity, high selectivity, fast response/recovery times. The response of p-type GaN-HP with etching time for 10 min to 2 ppm NO2 gas was 6.2%, which also have quick response and recovery time at room temperature. UV light drastically enhanced the response of p-type GaN-HP sensor by 1.3 times to 100 ppm NO2 . The gas sensing mechanism of p-type GaN-HP gas sensor was explored, which provided a theoretical and experimental basis for further research and development of high-performance gas sensors based on GaN material. © 2022, The Authors. All rights reserved.

关键词： Gallium nitride

来源：评论

学校读者我要写书评

暂无评论

Physical-layer key distribution using synchronous complex dynamics of DBR semiconductor lasers

arXiv

引用

arXiv 2023年

作者： Wang, Anbang Du, Yicheng Li, Qingtian Wang, Longsheng Jia, Zhiwei Qin, Yuwen Wang, Yuncai Institute of Advanced Photonics Technology School of Information Engineering Guangdong University of Technology Guangzhou51006 China Key Laboratory of Photonic Technology for Integrated Sensing and Communication Ministry of Education of China Guangdong University of Technology Guangzhou51006 China Guangdong Provincial Key Laboratory of Information Photonics Technology Guangdong University of Technology Guangzhou51006 China Key Lab of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China College of Optoelectronics Taiyuan University of Technology Taiyuan030024 China

Common-signal-induced synchronization of semiconductor lasers with optical feedback inspired a promising physical key distribution with information-theoretic security and potential in high rate. A significant challenge is the requirement to shorten the synchronization recovery time for increasing key rate without sacrificing operation parameter space for security. Here, open-loop synchronization of wavelength-tunable multi-section distributed Bragg reflector (DBR) lasers is proposed as a solution for physical-layer key distribution. Experiments show that the synchronization is sensitive to two operation parameters, i.e., currents of grating section and phase section. Furthermore, fast wavelength-shift keying synchronization can be achieved by direct modulation on one of the two currents. The synchronization recovery time is shortened by one order of magnitude compared to close-loop synchronization. An experimental implementation is demonstrated with a final key rate of 5.98 Mbit/s over 160 km optical fiber distance. It is thus believed that fast-tunable multi-section semiconductor lasers opens a new avenue of high-rate physical-layer key distribution using laser synchronization. Copyright © 2023, The Authors. All rights reserved.

关键词： Synchronization

来源：评论

学校读者我要写书评

暂无评论

Tuning Electrical Conductivity and Ultrafast Optical Nonlinearity of R-Go Films Ablated by Femtosecond Laser Direct Writing

SSRN

引用

SSRN 2024年

作者： Tao, Youliang Nie, Zhongquan Zhang, Xuefeng Pan, Deng Wang, Han College of Aeronautics and Astronautics Taiyuan University of Technology Taiyuan030024 China Key Lab of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi Province College of Electronic Information and Optical Engineering Taiyuan University of Technology Taiyuan030024 China Institute of New Carbon Materials College of Materials Science and Engineering Taiyuan University of Technology Taiyuan030024 China Information Materials and Intelligent Sensing Laboratory of Anhui Province Anhui University 111 Jiu Long Road Hefei230601 China

Carbon-based nanomaterials with excellent electrical and optical properties are highly sought after for a plethora of hybrid applications ranging from advanced opto-electronic components to sustainable energy storage devices. In this contribution, we examine in detail the dependence of electrical conductivity and ultrafast optical nonlinearity of graphene oxide (GO) films on their degrees of reduction, as well as the link between the two properties. The GO films are first synthesized through the vacuum filtration method and then reduced partially controllably by the femtosecond laser direct writing with varying power doses. Subsequently, the 4-point probe measurements of the reduced GO (r-GO) films are demonstrated to exhibit superior resistivity and electrical conductivity compared with the pristine GO counterpart. It was found that the conductivity of the film increases and then decreases with increasing ablation laser power (P), GO was completely reduced at P = 100 mW with resistivity and electrical conductivity of 1.09 × 10-3Ω·m and 9.19 × 102s/m, respectively. GO was over reduced at P = 120 mW with resistivity and electrical conductivity being 3.72 × 10-3Ω·m and 2.69 × 102s/m, respectively. We further test the ultrafast optical nonlinearity (ONL) of the as-prepared pristine and reduced GO with the femtosecond Z-scan technique. The results show that the behavior of ONL is reversed whenever GO is reduced in a controlled manner. More interestingly, the higher the ablation laser power is, the stronger the optical nonlinearity of r-GO is. In particular, the nonlinear absorption and refraction coefficients of the r-GO films reach up to 3.26 × 10-8 m/W and -1.12 × 10-13 m2/W when P = 120 mW. The nonlinear absorption and refraction coefficients reach 1.9 × 10-8 m/W and -3 × 10-13 m2/W, respectively, for P = 70 mW. The GO/r-GO films endowing tunable electro-optical responses are potential building blocks for wide-ranging applications in microelectronic circuits, optoele

关键词： Femtosecond lasers

来源：评论

学校读者我要写书评

暂无评论

Cavitation of a Submerged Jet at the Spherical Valve Plate/Cylinder Block Interface for Axial Piston Pump

引用

Chinese Journal of Mechanical Engineering 2020年第5期33卷 197-211页

作者： Bin Zhao Weiwei Guo Long Quan College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan 030024China Transducers and Intelligent Control System of Ministry of Education and Shanxi Province Taiyuan University of TechnologyTaiyuan 030024China The State Key Laboratory of Fluid Power&Mechatronic Systems Zhejiang UniversityHangzhou 310027China

The spherical valve plate/cylinder block pair has the advantages of strong overturning resistance and large bearing ***,the configurations of the unloading and pre-boosting triangular grooves on the spherical valve plate are different from those in the planar valve plate,resulting in special cavitation phenomenon on the spherical port plate *** order to study cavitation characteristics of spherical port plate pair,a dynamic CFD model of the piston pump including turbulence model,cavitation model and fluid compressibility is established.A detailed UDF compilation scheme is provided for modelling of the micron-sized spherical oil film mesh,which makes up for the lack of research on the meshing of the spherical oil *** this paper,using CFD simulation tools,from the perspectives of pressure field,velocity field and gas volume fraction change,a detailed analysis of the transient evolution of the submerged cavitation jet in a axial piston pump with spherical valve plate is carried *** study indicates the movement direction of the cavitation cloud cluster through the cloud image and the velocity vector direction of the observation *** sharp decrease of velocity and gas volume fraction indicates the collapse phenomenon of bubbles on the part wall *** discoveries verify the special erosion effect in case of the spherical valve plate/cylinder block *** submerged cavitation jet generated by the unloading triangular grooves distributed on the spherical valve plate not only cause denudation of the inner wall surface of the valve plate,but also cause strong impact and denudation on the lower surface of the cylinder ***,the direction of the unloading triangular groove was modified to extend the distance between it and the wall surface which can effectively alleviate the erosion effect.

关键词： Cavitation submerged jet Spherical valve plate/cylinder block pair Axial piston pump

来源：评论

学校读者我要写书评

暂无评论

Dimensional synthesis and static/dynamic analysis of a robot in automobile hubs polishing

Dimensional synthesis and static/dynamic analysis of a robot...

引用

IEEE International Conference on Mechatronics and Automation

作者： Long Chen Manru Xi Yue Ma Bin Li Qi Liu Changrui Li Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

Focusing on the polishing operation of automobile hubs, this paper proposed a polishing robot by combining a 1T2R parallel mechanism (PM) and an X-Y worktable. The dimensional synthesis and static/dynamic performance analysis of the 1T2R PM are also presented with the key points as follows. Firstly, the inverse displacement model and velocity model of the PM are built to formulate the motion/force transmissibility indices on the basis of the generalized Jacobian matrix. Secondly, the dimensional synthesis problem is formulated to determine the optimized normalized dimensional parameters by maximizing the global force/motion transmissibility of the PM subject to geometric constraints without mechanical interference. Finally, the finite element (FE) model of the 1T2R PM is built with the aid of the SAMCEF, and the static stiffness and lower-order natural frequencies of the PM are evaluated. The research results of this paper provide dimensions and mechanical structures for developing the physical prototype of the automobile hub polishing robot.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A control Method of Robotic Arm Based on Improved Deep Deterministic Policy Gradient

A Control Method of Robotic Arm Based on Improved Deep Deter...

引用

IEEE International Conference on Mechatronics and Automation

作者： Yanpeng Shao Haibo Zhou Shuaishuai Zhao Xiaoyan Fan Jiayi Jiang National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China

With the continuous development of Machine Learning, Reinforcement Learning has achieved excellent results in many fields. An improved Deep Deterministic Policy Gradient (DDPG) algorithm is proposed in this paper to optimize Reinforcement Learning control performance, because of the issue of sparse rewards during training in continuous action spaces such as robotic arms, leading to slow convergence and low success rates. The algorithm merges the DDPG algorithm with the Hindsight Experience Relay (HER) algorithm, enabling the agent to learn from the failed experience when learning. Moreover, a double experience replay buffer is introduced, comprising a primary buffer and a secondary buffer containing high-reward experiences, which enhances the sampling probability of high-quality samples. At long last, a PyBullet simulation environment was utilized to execute a simulation experiment. The robotic arm using the improved DDPG algorithm achieved a success rate of nearly 100% in about 220 epochs of training, and the algorithm convergence speed was greatly improved. The trained robotic arm can reach any target point in the workspace. The efficacy of the improved DDPG algorithm is demonstrated by the outcomes, providing a valuable reference for further exploration into the intelligent control of robotic arms for object grasping.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Structure design and kinematics modeling of a new continuum parallel robot

Structure design and kinematics modeling of a new continuum ...

引用

IEEE International Conference on Mechatronics and Automation

作者： Xinjie Wang Bin Li Yue Ma Wei Peng Pai Peng Jinyuan Wang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

Compared with the traditional rigid robots, the continuum robot has been widely studied because of its advantages of compact design and flexible motion. The design of continuum parallel robots are similar to that of the traditional rigid-link parallel robot, and the precision, stability and strength characteristics of rigid-link parallel robots are combined with the compactness and flexibility characteristics of continuum robots. In recent research advances, it is well appreciated to suggest that the use of parallel continuum robots with passive supports is supported by elastic rods. The passive branch undergoes deformation along its entire length and uses complex formulas to describe its shape and kinematics. According to different methods, this paper proposes the design of a parallel robot dual continuum translation passive branch chain. This continuum joint will assume a constant curvature bend and use this assumption for kinematic modeling. Since the continuum joint is a flexible joint that utilizes the characteristics of new materials, it uses material deformation to replace the motion pair, which successfully realizes that the passive branch joint can replace the universal joint and the ball hinge in the parallel robot, and the joint can be bent more than 90 0 to achieve a larger range of workspace. Each passive branch of the new continuum robot is a continuum structure composed of two mutually coupled flexible hinge joints, and the translational motion of the end effector is inherently realized by using its material properties. The paper includes a new mechanism description and kinematics modeling.

关键词：

来源：评论

学校读者我要写书评

暂无评论

PATH OPTIMIZATION FOR DYNAMIC OBSTACLE AVOIDANCE OF PIONEER ROBOT BASED ON DDPG SMART AGENT

引用

UPB Scientific Bulletin, Series D: Mechanical Engineering 2023年第2期85卷 29-42页

作者： Zheng, Qingchun Peng, Zhi Zhu, Peihao Zhao, Yangyang Ma, Wenpeng Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology Tianjin300384 China China School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China School of Computer Science and Engineering Tianjin University of Technology Tianjin300384 China

To improve the path efficiency for dynamic obstacle avoidance algorithms of Pioneer robots, this paper proposes an approach to create deep deterministic policy gradient (DDPG) smart agents with recurrent neural networks (RNN) to optimize the path strategy. This approach is realized by training RNN with the backpropagation (BP) algorithm to train the agent. First, the SolidWorks model and obstacle avoidance model of the Pioneer robot is established. The LIDAR sensor is used to obtain environmental information. Further, deep reinforcement learning obstacle avoidance algorithm based on RNN is presented. The dynamic obstacle avoidance path of the Pioneer robot is further simulated in two different virtual robot experiment platform (V-REP) scenarios. The simulation results show that the proposed algorithm shortens the training time by 26.3% compared with the DDPG algorithm. Our proposed scheme can improve the path efficiency for dynamic obstacle avoidance of the Pioneer robot. © 2023, Politechnica University of Bucharest. All rights reserved.

关键词： Reinforcement learning

来源：评论

学校读者我要写书评

暂无评论

intelligent Diagnosis of Planetary Gearboxes Based on DAE-CNN

Intelligent Diagnosis of Planetary Gearboxes Based on DAE-CN...

引用

Prognostics and system Health Management Conference (PHM-Qingdao)

作者： Tianbo Kang Mian Zhang Ruitong Xie Jiwei Chen Hongbiao Xiang Yuhang Wang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology) Tianjin China

Planetary gearboxes (PGs) are the core transmission components of complex rotating machinery. The diverse forms of internal gear faults often complicate diagnosis and maintenance work. To improve the fault diagnosis accuracy of PGs, this paper proposes a method for diagnosing PG faults based on deep autoencoders (DAE) and convolutional neural networks (CNN). The method fully utilizes the deep learning capability of DAE and combines it with the precise recognition ability of CNN for fault features. Through precise learning in the encoding layer, it achieves deep dimensionality reduction of fault features and further learns these features after dimensionality reduction by CNN. Compared to traditional CNN, the method reduces the computation parameters and resource consumption, resulting in higher precision intelligent fault diagnosis. Experimental results demonstrate that DAE-CNN exhibits stronger fault diagnosis ability than traditional networks.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：