检索结果-内蒙古大学图书馆

Advances in Electrical, Electronics and Computing Technology (EECT), International Conference on

作者： Chang Xu Mingqiang Wang Zihan Wang Yizhe Zhang Jialiang Wang Fengbin Sun Key Laboratory of Power System Intelligent Dispatch and Control Ministry of Education Shandong University Jinan China

ISBN: (数字)9798331541545

ISBN: (纸本)9798331541552

The widespread integration of renewable energy presents significant challenges for power system scheduling. Traditional power system scheduling is mainly based on the concept of “coordinating on a multi-time-level and gradually refining at each level,” using a sequential scheduling framework. However, with the growing integration of renewable energy, the uncertainty in power systems has significantly increased, leading to severe issues such as conflicts in the coordination between different modules. This paper first introduces the scheduling framework of the traditional sequential scheduling model. Then, addressing the problems of module coordination and insufficient flexibility, an integrated multi-time-scale scheduling model is proposed. This model combines day-ahead and intraday scheduling models, optimizing decision variables including unit start/shut states, operation points, and reserves simultaneously to maximize the collaborative potential between different scheduling modules. After linearization, the proposed model is converted into a mixed-integer linear programming (MILP) model, which can be solved directly using commercial optimization solvers. Finally, case analyses demonstrate the effectiveness and superiority of the proposed integrated model compared to the traditional sequential scheduling model.

关键词： Renewable energy sources Analytical models Uncertainty Fluctuations Processor scheduling Refining Regulation Power systems Power system reliability Load modeling

来源：评论

学校读者我要写书评

暂无评论

High-spatial-resolution phase-chaos Brillouin optical correlation domain sensor: theoretical analysis and experimental demonstration

引用

Journal of Lightwave Technology 2025年第12期43卷 5957-5966页

作者： Niu, Lintao Wang, Yahui Tian, Yixiu Ma, Jinglian Zhang, Mingjiang Taiyuan University of Technology Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan030024 China Taiyuan University of Technology College of Physics and Optoelectronic Engineering Taiyuan030024 China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan030032 China

The predicaments of micro-scale gain motivation and its high signal-to-noise ratio (SNR) extraction primarily restrict the practical measurement of a superior spatial resolution (SR) for stimulated Brillouin scattering sensors. A high-SNR phase-chaos laser Brillouin optical correlation domain analysis (PCL-BOCDA) is introduced to breakthrough the physical bottlenecks. The fundamental principle of gain excitation scale based on PCL linewidth is proposed, and a novel SR evolvement model is constructed. The significant impact of edge effects on SR measurement is thoroughly analyzed, and this approach is theoretically capable of achieving higher SR benefiting from the narrower gain range and feebler accumulation noise. Experiments with different linewidth PCLs are conducted and the results are confirmed to the simulated ones. Ultimately, an SR of 4.8 mm with a relative error of 4.3% is achieved over a 1.14 km sensing distance, representing a tenfold improvement over previous results. This advancement provides a competent approach for high-SR sensors and their application. © 1983-2012 IEEE.

关键词： Stimulated Brillouin scattering

来源：评论

学校读者我要写书评

暂无评论

Model and Simulation of Multipath Error in DLL for GPS Receiver

引用

Chinese Journal of Electronics 2025年第3期23卷 508-515页

作者： Lan Cheng Jie Chen Gang Xie Taiyuan University of Technology Taiyuan China Education Ministry Key Laboratory of Complex System Intelligent Control and Decision Beijing Institute of Technology Beijing China

Although different multipath error models of Delay lock loop (DLL) used in GPS receiver are established, they have never been put together for comparison. Furthermore, no universal simulation method is developed to get a fair comparison among these models. A new model with implicate expression is hence proposed for the coherent DLL and the noncoherent Dot-product (DOT) power mode DLL. Meanwhile, a new simulation method based on the anonymous function in Matlab, which is especially suitable for models with implicit expression, is also proposed to compare the new model with the existing ones. The theoretical analysis and simulation results show that the existing models are the special case of the proposed one. The new simulation method can be used for the comparison of different multipath error models and the multipath error analysis of other DLLs for which only the implicit model is available.

关键词： Analytical models Tracking loops Codes Error analysis Simulation Receivers US Department of Transportation Mathematical models MATLAB Global Positioning system

来源：评论

学校读者我要写书评

暂无评论

Robust Consensus Based Secondary control for Microgrids Considering Communication Delay and Noises: A Kalman Filter Based Approach

引用

IEEE Transactions on Smart Grid 2025年

作者： Zhao, Qi Zhang, Wen Zhang, Tingting Chen, Jian Ye, Hua Shandong University Key Laboratory of Power System Intelligent Dispatch and Control of Ministry of Education School of Electrical Engineering Jinan250061 China Shandong University Shandong Research Institute of Industrial Technology Key Laboratory of Power System Intelligent Dispatch and Control of Ministry of Education School of Electrical Engineering Jinan250061 China

To achieve the frequency and voltage regulation as well as active and reactive power sharing, the consensus-based secondary controls of microgrids rely on communication network to exchange signals between neighbor inverters, which may be affected by the communication delay and noises. Unlike the existing methods that focus solely on communication delay, this paper proposes a Kalman filter-based robust consensus control to address the communication delay and noises comprehensively. Based on the discrete differential equation of the signal transmitted via communication network, the multi-step prediction model of the delayed signal is firstly built by considering the prediction errors. The state space model is then constructed by taking the predicted signals at each step as the state variables while the delayed and noise-involved signal and its differential value are seen as the measurements. A Kalman filter is further designed to comprehensively handle the communication delay, noises and prediction errors to estimate the true signal generated from neighbor inverters. With the estimated signals of all neighbor inverters, the consensus control is performed to coordinate the grid-following and grid-forming inverters within the microgrid. The effectiveness of the proposed method is demonstrated with simulations and experiments performed on the modified IEEE-33 bus-based microgrid. © 2010-2012 IEEE.

关键词： Kalman filters

来源：评论

学校读者我要写书评

暂无评论

3D bioprinting of a dermal scaffold for full-thickness skin tissue regeneration

引用

Bio-Design and Manufacturing 2025年第1期8卷 68-84,I0039-I0041页

作者： Lu Han Zixian Liu Meng Li Zhizhong Shen Jianming Wang Shengbo Sang Shanxi Key Laboratory of Micro Nano Sensors&Artificial Intelligence Perception College of Electronic Information and Optical EngineeringTaiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Advanced Transducers and Intelligent Control System of the Ministry of Education Taiyuan University of TechnologyTaiyuan 030024China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030024China Shanxi Research Institute of 6D Artificial Intelligence Biomedical Science Taiyuan 030031China General Hospital of TISCO Taiyuan 030809China

Dermal substitutes have provided a template for the regeneration and reconstruction of the ***,the healed skin tissue often exhibits abnormal morphology and functionality,including scarring and *** this study,a composite bioink composed of methacrylated gelatin(GelMA)and chitosan oligosaccharide(COS)was proposed for printing a dermal scaffold using digital light processing(DLP)*** GelMA/COS bioink exhibited suitable porosity,swelling,degradation rate,and mechanical *** inclusion of COS demonstrated antibacterial effects against both Gram positive and Gram-negative bacteria,while simultaneously fostering the proliferation of human dermal fibroblasts(HDFs).Additionally,the application of COS could effectively reduce the expression levels of fibrosis-related genes,such as collagen I,collagen III,and fibronectin *** three-dimensionally printed cell-laden dermal scaffold exhibited excellent shape fidelity and high cellular viability,facilitating the extension of HDFs along the scaffold and the simultaneous secretion of extracellular matrix ***,the HDF-laden dermal scaffold transplanted into full-thickness skin defect sites in nude mice was shown to accelerate wound closure,reduce inflammation,and improve wound ***,the DLP-printed dermal scaffold provides an appealing approach for effectively treating full-thickness skin defects in clinical settings.

关键词： 3D printing Dermal scaffold Photo-cross-linking Skin tissue regeneration

来源：评论

学校读者我要写书评

暂无评论

Binary-Encoding-Based Quantized Kalman Filter: An Approximate MMSE Approach

引用

IEEE Transactions on Automatic control 2025年第5期70卷 3181-3196页

作者： Liu, Qinyuan Nie, Yao Wang, Zidong Dong, Hongli Jiang, Changjun Tongji University School of Computer Science and Technology Shanghai201804 China Tongji University Key Laboratory of Embedded System and Service Computing Ministry of Education Shanghai201804 China Tongji University Shanghai Artificial Intelligence Laboratory Shanghai201804 China Brunel University London Department of Computer Science UxbridgeUB8 3PH United Kingdom Northeast Petroleum University Artificial Intelligence Energy Research Institute Daqing163318 China Northeast Petroleum University Heilongjiang Provincial Key Laboratory of Networking and Intelligent Control Daqing163318 China

In this article, the Kalman filter design problem is investigated for linear discrete-time systems under binary encoding schemes. Under such a scheme, the local information is quantized into a bit string by the remote sensor based on a probabilistic quantizer, and then the bit string is transmitted via memoryless binary symmetric channels (BSCs). Due to the communication link noises, the bit flipping occurs in a random manner, and thus, the transmission of the bit string would suffer from specific bit-error rates. With the received bits, a recursive binary-encoding-based quantized Kalman filter is established in the approximate minimum mean-square error (MMSE) sense, which relies on the Gaussian approximation of the conditional probability density function at each iteration. Furthermore, the proposed estimator is shown to be of a Kalman-like type through performance analysis, which exhibits computational complexity comparable to the conventional Kalman filter. Subsequently, a posterior Cramér-Rao lower bound is derived for the proposed binary-encoding-based quantized Kalman filter. The effectiveness of the proposed estimator is demonstrated through numerical results. © 1963-2012 IEEE.

关键词： Mean square error

来源：评论

学校读者我要写书评

暂无评论

InGaAlAs/InP MQW transistor lasers based on step-ridge waveguides

IEEE Electron Device Letters

引用

IEEE Electron Device Letters 2025年

作者： Liu, Yijia Qiao, Lijun Tang, Xin Liang, Song Zhang, Mingjiang Taiyuan University of Technology College of Physics and Optoelectronics Taiyuan030024 China Ministry of Education Taiyuan University of Technology Key Laboratory of Advanced Transducers and Intelligent Control System Shanxi Taiyuan030024 China Chinese Academy of Sciences Key Laboratory of Optoelectronic Materials and Devices Beijing100083 China University of Chinese Academy of Sciences Center of Materials Science and Optoelectronics Engineering Beijing100049 China

We propose and numerically investigate a new step-ridge-waveguide InGaAlAs/InP multi-quantum well (MQW) transistor laser (TL). The carrier nonradiative recombination centers caused by the exposed deep-ridge waveguide sidewall significantly degrade the optoelectronic performance of the TLs. The step-ridge-waveguide structure guides carriers through the center portion of the ridge waveguide, thereby effectively mitigating the effect of the nonradiative recombination defects. Simulation results show that the optoelectronic characteristics of the step-ridge TL are far better than those of the conventional deep-ridge TL, and the current amplification factor of the step-ridge TL is not affected by the laser excitation. This structure provides a new option for the simultaneous enhancement of the optoelectronic performance of TLs. © 1980-2012 IEEE.

关键词： Laser excitation

来源：评论

学校读者我要写书评

暂无评论

Cascading Failure Screening Based on Gradient Boosting Decision Tree for HVDC Sending-End systems with High Wind Power Penetration

引用

IEEE Transactions on Power systems 2025年

作者： Liu, Tianhao Yan, Jiongcheng Liu, Yutian Chung, Chi Yung Shandong University Key Laboratory of Power System Intelligent Dispatch and Control of Ministry of Education Jinan China The Hong Kong Polytechnic University Department of Electrical and Electronic Engineering Kowloon Hong Kong

In LCC-HVDC sending-end AC systems, cascading failures combined with the dynamic response of wind turbines (WTs) can lead to HVDC commutation failures. The resulting transient voltage disturbances cause WT tripping in sending-end systems. Cascading failures that involve the interaction between WTs and HVDC significantly limit the wind power transmitted by HVDC systems. This paper proposes an online cascading failure screening method based on gradient boosting decision tree (GBDT) for HVDC sending-end systems with large-scale WTs. First, a confidence level-based WT tripping model is proposed for cascading failure risk assessment considering a typical cascading failure propagation pattern. Then, Monte Carlo tree search is improved using a contrastive pruning technique to generate evenly distributed samples of cascading failures offline. Dynamic insecure scenarios are quickly identified using an improved support vector machine. Finally, GBDT is utilized to screen for cascading failures online by predicting subsequent high-risk failures using operating features. A dynamic weighting technique is proposed for GBDT to improve the fault prediction accuracy. Simulation results of a modified New England test system and the Ningxia provincial power grid in western China demonstrate that the proposed method can quickly screen for cascading failures considering the dynamic interaction between WTs and HVDC. © 1969-2012 IEEE.

关键词： Risk assessment

来源：评论

学校读者我要写书评

暂无评论

A Novel Integrated Energy Management Strategy of Energy Storage system for a Pure Electric-Driven Mining Hydraulic Excavator

引用

Chinese Journal of Mechanical Engineering 2025年第2期 465-481页

作者： Tao Qin Yunhua Li Long Quang Yu Yao Liman Yang School of Automation Science and Electrical Engineering Beihang University Beijing Tianma Intelligent Control Technology Co. Ltd. Key Lab of Advanced Transducers and Intelligent Control System of Ministry of Education Taiyuan University of Technology

Using electric motors instead of diesel engines as the driving system for mining excavators can reduce the energy consumption and operating costs. However, pure electric-driven mining excavators are prone to unexpected power outages in mines because of drastic changes in load power, leading to significant fluctuations in the power demand of the grid, which in turn affects production. To solve the above problem, a pure electric-driven mining hydraulic excavator based on electric-motor-driven swing platform and hydraulic pumps was used as the research object. Moreover, supercapacitors and DC/DC converter, as the energy storage system(ESS) adjust the output power of the grid and recover the braking kinetic energy of the swing platform. Subsequently, a novel integrated energy management strategy for a DC bus voltage predictive controller based on the power feedforward of fuzzy rules is proposed to run mining excavators efficiently and reliably. Specifically, the working modes of the ESS are determined by the DC bus voltage and state of charge(SOC) of the supercapacitor. Next, the output power of the supercapacitor and the DC bus voltage were controlled by adjusting the charging and discharging currents of the DC/DC converter using a predictive controller and fuzzy rules. In addition, a digital prototype of the excavator was verified using an original machine test. The performance of the different strategies and driven systems were analyzed using digital prototypes. The results showed that, compared with traditional excavators with diesel engines, the operational cost of the developed excavators was reduced by 54.02%. Compared to pure electric-driven excavators without an ESS, the peak power of the grid for the developed excavators was reduced by 10%. This study designed an integrated energy management strategy for a pure electric mining excavator that can regulate the power output of the grid and maintain the stability of the bus voltage and SOC of the ESS.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Detecting the Position of the Moving-iron Solenoid by Non-displacement Sensor Based on Parameter Identification of Flux Linkage Characteristics

引用

Chinese Journal of Mechanical Engineering 2013年第6期26卷 1204-1211页

作者： WANG Xuping QUAN Long XIONG Guangyu Key Laboratory of Advanced Transducers and Intelligent Control System of Ministry of Education Taiyuan University of Technology

Currently, most researches use signals, such as the coil current or voltage of solenoid, to identify parameters; typically, parameter identification method based on variation rate of coil current is applied for position estimation. The problem exists in these researches that the detected signals are prone to interference and difficult to obtain. This paper proposes a new method for detecting the core position by using flux characteristic quantity, which adds a new group of secondary winding to the coil of the ordinary switching electromagnet. On the basis of electromagnetic coupling theory analysis and simulation research of the magnetic field regarding the primary and secondary winding coils, and in accordance with the fact that under PWM control mode varying core position and operating current of windings produce different characteristic of flux increment of the secondary winding. The flux increment of the electromagnet winding can be obtained by conducting time domain integration for the induced voltage signal of the extracted secondary winding, and the core position from the two-dimensional fitting curve of the operating winding current and flux-linkage characteristic quantity of solenoid are calculated. The detecting and testing system of solenoid core position is developed based on the theoretical research. The testing results show that the flux characteristic quantity of switching electromagnet magnetic circuit is able to effectively show the core position and thus to accomplish the non-displacement transducer detection of the said core position of the switching electromagnet. This paper proposes a new method for detecting the core position by using flux characteristic quantity, which provides a new theory and method for switch solenoid to control the proportional valve.

关键词： switch solenoid flux characteristic quantity position detection non-displacement sensor

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：