检索结果-内蒙古大学图书馆

SSRN 2023年

作者： Ding, Lifeng Song, Yuru Li, Qiang Guo, Jinqing Zhang, Jie Wang, Qi Dong, Hongmei Song, Yongbo Song, Zhengwei Zhao, Xiaohong Niu, Yulan Department of Chemistry and Chemical Engineering Taiyuan Institute of Technology Taiyuan030008 China School of Chemical Engineering and Technology North University of China Taiyuan030051 China MicroNano System Research Center College of Information and Computer Key Laboratory of Advanced Tran sducers and Intelligent Control System Ministry of Education and Shanxi Province Taiyuan University of Technology Taiyuan030024 China

In this work, a ZIF-67/MWCNT/Nafion sensor platform was constructed based on the good adsorption capacity of ZIF-67, the electrical conductivity of multiwalled carbon nanotubes (MWCNTs) and the excellent chemical stability of Nafion for the detection of Cu2+ in water. Meanwhile, the modified materials were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and Fourier transform infrared spectrometry (FT-IR). Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and square wave stripping voltammetry (SWSV) were used to characterize and test ZIF-67/MWCNT/Nafion/GCE. The results show that ZIF-67/MWCNT/Nafion/GCE has high sensitivity (57.5 μA/μM) and a low limit of detection (4.3 nM) for the electrochemical detection of Cu2+ ions in an electrochemical sensing system. Finally, the modified electrode has good repeatability, reproductivity, anti-interference and stability and can be applied to test domestic water. © 2023, The Authors. All rights reserved.

关键词： Electrochemical sensors

来源：评论

学校读者我要写书评

暂无评论

Study on Mechanical Properties of Dual-Channel Cryogenic 3d Printing Scaffold for Mandibular Defect Repair

SSRN

引用

SSRN 2023年

作者： Gao, Lilan Sun, Mengchao Liu, Jie Meng, Lulu Liu, Han Zheng, Xiongfei Liu, Hao Li, Ruixin Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300382 China Tianjin300382 China Beijing Friendship Hospital Capital Medical University 100050 China State Key Laboratory of Robotics Institutes for Robotics and Intelligent Manufacturing Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110017 China Tianjin Key Laboratory of Oral and Maxillofacial Function Reconstruction Tianjin Stomatological Hospital The Affiliated Stomatological Hospital of Nankai University Tianjin300041 China

Mandibular defect repair has always been a clinical challenge, facing technical bottleneck. The new materials directly affect technological breakthroughs in mandibular defect repair field. Our aim is to fabricate a scaffold for mandibular defect repairing with advanced biomaterials. Therefore, a novel dual-channel printed scaffold consisting of silk fibroin/collagen type I /hydroxyapatite (SCH) and polycaprolactone/hydroxyapatite (PCL/HA) was fabricated by 3D printing technology with double nozzles. The mechanical properties and behaviors of dual-channel printed scaffold were investigated by performing uniaxial compression, creep, stress relaxation and ratcheting experiments respectively. The experiments indicated the Young modulus of dual-channel printed scaffold was 60.1 kPa and dual-channel printed scaffold was typical nolinear viscoelastic consistent with bone tissue. Finite Element Analysis (FEA) was employed performing a numerical simulation to evaluate the implantation effect in mandible. The stress distribution of the contact area between scaffold and defect was uniform, the maximum Mises stress of cortical bone and cancellous bone in defect area were 54.52MPa and 3.196MPa, and the maximum displacement of cortical bone and cancellous bone in defect area were 0.1575mm and 0.1555mm, which were distributed in the incisor region. The peak value of the maximum Mises stress for the scaffold implanted was 3.128× MPa and the maximum displacement was 6.453×mm distributed near incisor area. The displacement distribution of the scaffold was consistent with that of cortical and cancellous bone. The scaffold recovered well when the force applied on it disappeared. Above all, dual-channel printed scaffold had excellent bio-mechanical properties in implanting mandible, which provides a new idea for the reconstruction of irregular bone defects in the mandible and has good clinical development prospects. © 2023, The Authors. All rights reserved.

关键词： 3D printing

来源：评论

学校读者我要写书评

暂无评论

Hamiltonian Dynamics and Targeted Energy Transfer of a Grounded Bistable Nonlinear Energy Sink

SSRN

引用

SSRN 2022年

作者： Li, Shuangbao Zhou, Xinxing Chen, Jianen Research Institute of Science and Technology Civil Aviation University of China Tianjin300300 China College of Science Civil Aviation University of China Tianjin300300 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China

A two-degree-of-freedom nonlinear mechanical system describing a damped linear oscillator weakly coupled to a lightweight grounded bistable nonlinear energy sink is proposed to investigate the targeted energy transfer (TET) under asymmetric local nonlinear potentials. The Bogdanov-Takens bifurcations of equilibria are discussed to reflect the bistable and asymmetric characteristics of the system. Through projections of isoenergetic manifolds, the topological features of the Hamiltonian dynamics under $1:1$ internal resonance have been investigated, which induces conditions for energy localization and exchange. In the general case, the topological features of the Hamiltonian dynamics related to the nonlinear normal modes (NNMs) are classified by the Poincare map, the relations between the NNMs and the Hamiltonian dynamics have been interpreted through the frequency energy plots. The results show that introducing the asymmetric characteristics may enhance the TET and realize the complete TET. © 2022, The Authors. All rights reserved.

关键词： Degrees of freedom (mechanics)

来源：评论

学校读者我要写书评

暂无评论

The Design and Research of Resistance Instrument in Ship Towing Test

The Design and Research of Resistance Instrument in Ship Tow...

引用

IEEE International Conference on Mechatronics and Automation

作者： Nan Li Nan Liu Xueqi Zhang Chao Cui National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology Tianjin China Tianjin Baolai Precision Machinery Industry Group Co. Ltd Tianjin China

ISBN: (数字)9798350388077

ISBN: (纸本)9798350388084

Based on the requirements of ship resistance towing test, a strain gauge type of resistance instrument has been designed, which consisting of the frame, towing component, course component, measuring component, etc. The towing component is responsible for the towing movement of the ship model, and the course component is responsible for constructing different course angles in the test requirements. An automatic brake mechanism has been equipped in measuring component, which can ensure the stability and accuracy of the tension sensor in towing test. The strength limit on the key components of the resistance instrument has been calculated by finite element analysis software, the optimization has been used in vulnerable components, and the instrument strength and reliability has been insured in the test.

关键词： Resistance Instruments Force Strain measurement Stability analysis Finite element analysis Electrical resistance measurement

来源：评论

学校读者我要写书评

暂无评论

Modeling, Simulation, and Parameter Design of Actuation Mechanisms Based on New Magnetic control Materials

Modeling, Simulation, and Parameter Design of Actuation Mech...

引用

system Simulation Technology and its Application (CCSSTA), IEEE China Conference on

作者： Ruixuan Shen He Tian Guanqiao Zhao Ziliang Zhu Jiangping Li Chao Liang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology) Tianjin China Tianjin Sanyuan Power Equipment Manufacturing Co. Ltd Tianjin China

ISBN: (数字)9798350366600

ISBN: (纸本)9798350366617

With the rapid advancement of technology, the reliability and efficiency of power systems have become increasingly critical. In power systems, pole-mounted circuit breakers play a vital role. This paper presents a design scheme for an actuation mechanism of a pole-mounted circuit breaker based on new magnetic control materials. By analyzing the working principle of this actuation mechanism, a mathematical model was constructed, and a corresponding virtual prototype model was established using multi-body dynamics simulation software ADAMS and the dynamics mathematical model of this type of actuation mechanism. key performance parameters of the circuit breaker were optimized using a quantum genetic algorithm. Simulation experiments verified that the proposed parameter settings achieved a closing time of 7.6 ms, demonstrating significant improvements in circuit breaker performance. The results of this study are of great importance for the optimization design and performance enhancement of circuit breakers in power systems.

关键词： Vacuum systems Circuit breakers Power system dynamics Mathematical models Software systems simulation Integrated circuit modeling Magnetic circuits Optimization Genetic algorithms

来源：评论

学校读者我要写书评

暂无评论

AU Nanoparticles Decorated Gan Nanoflowers with Enhanced Nh3 Sensing Performance at Room Temperature

SSRN

引用

SSRN 2023年

作者： Han, Dan Chen, Yi Li, Donghui Shi, Jiexu Wang, Hongtao He, Xiuli Zhao, Li Wang, Weidong Sang, Shengbo Ji, Jianlong Shanxi Key Laboratory of Micro Nano Sensors and Artificial Intelligence Perception College of Electronic Information and Optical Engineering Taiyuan University of Technology Taiyuan030024 China Key Lab of Advanced Transducers and Intelligent Control System The Ministry of Education Taiyuan University of Technology Taiyuan030024 China State Key Laboratory of Transducer Technology Aerospace Information Research Institute Chinese Academy of Sciences Beijing100190 China Bioengineering Research Center Medical Innovation Research Division Chinese PLA General Hospital Beijing China Shanxi Research Institute of 6D Artificial Intelligence Biomedical Science China

Surface modification with noble metal is considered as an effective strategy to enhance sensing performance of semiconductor gas sensors. In this work, gold nanoparticles (Au NPs) decorated Gallium Nitride nanoflowers (Au-GaN NFs) have been synthesized successfully by a feasible hydrothermal method combined with high temperature nitridation and followed by in-situ reduction process. The characterizations of the structure and morphology of as-obtained Au-GaN NFs indicated that the Au NPs were successfully loaded on the surface of GaN. The excellent gas sensing performance was observed for GaN of 2 mol% Au loaded, including the high response (86.8%) to 100 ppm NH3 with fast response/recovery time (41 s/169 s) at room temperature, low theoretical limit of detection (72 ppb), good stability and selectivity. Besides, the influence of humidity on the performance of sensors was explored, where the response can be reached 56.5% towards 100 ppm NH3 under 70% RH. The improvement of the sensing performance of Au-GaN NFs sensor can be attributed to the combined action of chemical and electronic sensitization of Au NPs. This work provides a candidate of Au-GaN NFs for the development of wireless sensing system in NH3 monitoring. © 2023, The Authors. All rights reserved.

关键词： Nanoflowers

来源：评论

学校读者我要写书评

暂无评论

Exploring the Reform of Mechanical Drawing Teaching and Undergraduate Training Based on the “Integration of Competition-Oriented Education and Industry-University Collaboration”

Exploring the Reform of Mechanical Drawing Teaching and Unde...

引用

International Conference on Educational and Information Technology (ICEIT)

作者： Zhang Runfeng Ming Yankun Liu Zhenzhong Wu Jianguo Wang Xiaofei Sun Yanfang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin Hanhailanfan Marine Technology Co. Ltd. Tianjin China

ISBN: (数字)9798350372663

ISBN: (纸本)9798350372670

This study aims to explore the reform of mechanical drawing teaching and the undergraduate training model with the goal of cultivating high-quality mechanical engineering undergraduate students. Grounded in the concepts of “synergy between science and education” and “integration of competition-oriented education and industry-university collaboration,” this research places talent cultivation as the central focus, linking it with discipline construction and emphasizing scientific research. The study promotes the reform of a collaborative education mechanism known as “integration of competition-oriented education and industry-university collaboration,” effectively establishing a multi-level and multi-dimensional undergraduate training model for mechanical engineering students that incorporates the “dual mentor system” and integrates theory, practice, and application. To apply this model in teaching practice, this research has undertaken the reform of traditional engineering drawing education, specifically addressing the issue of the gap between theory and practice in conventional teaching approaches. The proposed training program not only facilitates the development of innovative mechanical engineering professionals but also offers insights for the reform of undergraduate teaching models in the context of constructing “new engineering disciplines”.

关键词： Training Couplings Technological innovation Engineering drawings Collaboration Mechanical engineering Machinery

来源：评论

学校读者我要写书评

暂无评论

A Low Delay AES Round Transform Architecture Using Constant Matrix Multiplications Merging Technologies

A Low Delay AES Round Transform Architecture Using Constant ...

引用

IEEE Conference on Industrial Electronics and Applications (ICIEA)

作者： Xinxing Zheng Xiaoqiang Zhang Fan Yang Mingyu Xu Han Yan College of Information Engineering Wuhu Institute of Technology Wuhu China Key Laboratory of Advanced Perception and Intelligent Control of High-end Equipment Ministry of Education Wuhu China Engineering Research Center of Vehicle-Mounted Display Integration System Wuhu China College of Electrical Engineering Anhui Polytechnic University Wuhu China

ISBN: (纸本)9781665409858

This paper presents a low delay architecture design method for the hardware implementation of the advanced Encryption Standard (AES) algorithm. The proposed architecture is designed by using constant matrix multiplications (CMM) merging technologies. To reduce the area cost in hardware implementations, S-box/InvS-box is usually implemented with composite field arithmetic (CFA) technologies. In this paper, CMM in CFA-based S-box/InvS-box are further merged with constant coefficient multiplications in MixColumns/ InvMixColumns, which can also be expressed as CMM forms. By the merging, the delay of the hardware implementation of encryption round transform is reduced at the cost of slight area cost increasing, and both delay and area cost are reduced in hardware implementations of decryption round transform. Hardware complexities analysis indicates that our designs have less delay compared with previous works.

关键词： Industrial electronics Costs Design methodology Merging Transforms Hardware Delays

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to “Influence of Na doping on the magnetic properties of LaFeO 3 powders and dielectric properties of LaFeO 3 ceramics prepared by citric sol-gel method” [Ceram. Int. 43 (2017) 7922–7928]

引用

Ceramics International 2017年第18期43卷 17247-17247页

作者： Ensi Cao Yanrong Qin Tingting Cui Li Sun Wentao Hao Yongjia Zhang Key Lab. of Advanced Transducers & Intelligent Control System College of Physics & Optoelectronics Taiyuan University of Technology Taiyuan 030024 People's Republic of China

来源：评论

学校读者我要写书评

暂无评论

NURBS Interpolator With Pre-compensation Based on Discrete Inverse Transfer Function for CNC High-precision Machining

Research Square

引用

Research Square 2021年

作者： Wang, Taiyong Cao, Libo Zhang, Yongbin Dong, Jingchuan Jia, Songhui Tian, Chong Liu, Qingjian Renai College Tianjin University Tianjin301636 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China School of Mechanical Engineering Tianjin University No.135 YaGuan Road Jinnan District Tianjin300354 China

In the field of CNC machining, high-speed and high-precision machining has been regarded as the key research by many scholars. In conventional methods, high-speed machining and high-precision machining are contradictory. It is inevitable to reduce the feedrate to improve the processing accuracy. In the paper, a pre-compensation based on discrete inverse transfer function (PDIT) theory is proposed. PDIT is able to improve machining accuracy by reducing contour errors without decreasing feedrate. The proposed PDIT theory is divided into three parts, NURBS interpolator, feedrate scheduling, and interpolator with pre-compensation. The NURBS interpolator has greatly advantage to interpolate the parameter curve directly. Therefore, the paper adopts the NURBS interpolator to accomplish interpolation. In the feedrate scheduling, S-type flexible acceleration and deceleration are used for path planning, and the maximum starting feedrate is obtained with the feedrate constraint. In the interpolator with pre-compensation, the NURBS interpolator is pre-compensated by PDIT. For inputs, the response of transfer function reach steady-state response with a little time. Before reaching steady-state response, the unsteady response exists in the transfer function. The unsteady response usually sustains tens of interpolation periods and must be lead contour error in machining. Hence, the PDIT theory is employed to compensate the contour error causing by the unsteady response of transfer function to NURBS interpolator. The drive system is a transfer function, so the unsteady response of drive system cause machining errors before reaching the steady-state response. In the paper, the NURBS interpolator is pre-compensated by PDIT theory before the drive system to reduce contour errors and improve machining accuracy. Finally, the performance of the proposed PDIT is evaluated by simulation experiments. The experimental results illustrate that PDIT theory obviously improve the machining accura

关键词： Transfer functions

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：