检索结果-内蒙古大学图书馆

The new field power device based on super capacitor and it's application

Binggong Xuebao/Acta Armamentarii 2012年第SUPPL2期33卷 417-422页

作者： Bai, Yong-Qiang Jin, Tian-Xu Wang, Hai-Jie School of Automation Beijing Institute of Technology Beijing 100081 China Key Laboratory of Complex System Intelligent Control and Decision Ministry of Education Beijing Institute of Technology Beijing 100081 China Harbin Jurong New Power Co. Ltd. Harbin 150078 Heilongjiang China

Based on special demand of field power for artillery electric drive system and analysis of the existing power system, a new design of hybrid power device with super capacitor is proposed to replace the traditional battery, which is more suitable to the field requirements, and has more energy efficiency, greater power ratio, and energy ratio. The design criteria and formula are presented. Test results show that the hybrid device, compared with the traditional power device, has the advantages of high efficiency, high energy volume ratio, high weight ratio, strong environmental adaptability, and good lower temperature performances, and can meet the demand of power device in the field condition.

关键词： Energy efficiency

来源：评论

学校读者我要写书评

暂无评论

Non-convex potential games for finding global solutions to sensor network localization

arXiv

引用

arXiv 2023年

作者： Xu, Gehui Chen, Guanpu Hong, Yiguang Fidan, Baris Parisini, Thomas Johansson, Karl H. Key Laboratory of Systems and Control Academy of Mathematics and Systems Science Beijing China Division of Decision and Control Systems School of Electrical Engineering and Computer Science KTH Royal Institute of Technology Stockholm100 44 Sweden Department of Control Science and Engineering Tongji University Shanghai201804 China Shanghai Research Institute for Intelligent Autonomous Systems Shanghai201210 China Department of Mechanical and Mechatronics Engineering University of Waterloo WaterlooONN2L 3G1 Canada Department of Electrical and Electronic Engineering Imperial College London LondonSW7 2AZ United Kingdom Department of Engineering and Architecture University of Trieste Trieste34127 Italy

Sensor network localization (SNL) problems require determining the physical coordinates of all sensors in a network. This process relies on the global coordinates of anchors and the available measurements between non-anchor and anchor nodes. Attributed to the intrinsic non-convexity, obtaining a globally optimal solution to SNL is challenging, as well as implementing corresponding algorithms. In this paper, we formulate a non-convex multi-player potential game for a generic SNL problem to investigate the identification condition of the global Nash equilibrium (NE) therein, where the global NE represents the global solution of SNL. We employ canonical duality theory to transform the non-convex game into a complementary dual problem. Then we develop a conjugation-based algorithm to compute the stationary points of the complementary dual problem. On this basis, we show an identification condition of the global NE: the stationary point of the proposed algorithm satisfies a duality relation. Finally, simulation results are provided to validate the effectiveness of the theoretical results. Copyright © 2023, The Authors. All rights reserved.

关键词： Sensor networks

来源：评论

学校读者我要写书评

暂无评论

SPP-CNN: An Efficient Framework for Network Robustness Prediction

arXiv

引用

arXiv 2023年

作者： Wu, Chengpei Lou, Yang Wang, Lin Li, Junli Li, Xiang Chen, Guanrong The College of Computer Science Sichuan Normal University Chengdu610066 China The Key Laboratory of System Control and Information Processing Ministry of Education Shanghai200240 China The Department of Computer Science National Yang Ming Chiao Tung University Hsinchu300 Taiwan The Department of Automation Shanghai Jiao Tong University Shanghai200240 China The Institute of Complex Networks and Intelligent Systems Shanghai Research Institute for Intelligent Autonomous Systems Tongji University Shanghai201210 China The Department of Control Science and Engineering Tongji University Shanghai200240 China The Department of Electrical Engineering City University of Hong Kong Hong Kong

This paper addresses the robustness of a network to sustain its connectivity and controllability against malicious attacks. This kind of network robustness is typically measured by the time-consuming attack simulation, which returns a sequence of values that record the remaining connectivity and controllability after a sequence of node- or edge-removal attacks. For improvement, this paper develops an efficient framework for network robustness prediction, the spatial pyramid pooling convolutional neural network (SPP-CNN). The new framework installs a spatial pyramid pooling layer between the convolutional and fully-connected layers, overcoming the common mismatch issue in the CNN-based prediction approaches and extending its generalizability. Extensive experiments are carried out by comparing SPP-CNN with three state-of-the-art robustness predictors, namely a CNN-based and two graph neural networks-based frameworks. Synthetic and real-world networks, both directed and undirected, are investigated. Experimental results demonstrate that the proposed SPP-CNN achieves better prediction performances and better generalizability to unknown datasets, with significantly lower time-consumption, than its counterparts. © 2023, CC BY.

关键词： complex networks

来源：评论

学校读者我要写书评

暂无评论

Design and Development of Big Data System for Blast Furnace Ironmaking

Design and Development of Big Data System for Blast Furnace ...

引用

Industrial Cyber-Physical systems (ICPS)

作者： Qifu Chen Jinhua She Min W Zhuofu Zhang Zhenhong Liao School of Future Technology China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration. Ministry of Education Wuhan China Hunan Valin Lianyuan Iron and Steel Co. Ltd. Loudi China School of Engineering Tokyo University of Technology Tokyo Japan School of Automation. China University of Geosciences Wuhan China

The process of blast furnace ironmaking is com-posed of several sub-processes. The process of blast furnace smelting is complicated and the data of each sub-process are scattered and not concentrated. The traditional working mode of subjective judgment based on manual experience is not conducive to the stable production of the blast furnace. Therefore, this paper develops a big data system for the production process of blast furnace, which is of great significance to realize the digital production and intelligent production of blast furnace. According to the system architecture of blast furnace ironmaking, this paper mainly designs and develops the data acquisition layer, data storage layer, data analysis layer and data application layer of the big data system.

关键词： Software design Data acquisition Smelting Memory systems architecture Production User interfaces

来源：评论

学校读者我要写书评

暂无评论

nonlocal quark condensate from Dyson-Schwinger Equation and its contributions to the gluon vacuum polarization based on OPE approach

arXiv

引用

arXiv 2021年

作者： Huang, Jing-Hui Duan, Xue-Ying Huan, Chen Wang, Guang-Jun Hu, Xiang-Yun School of Institute of Geophysics and Geomatics China University of Geosciences Lumo Road 388 Wuhan430074 China School of Automation China University of Geosciences Lumo Road 388 Wuhan430074 China School of Mathematics and Physics China University of Geosiciences Lumo Road 388 Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education China

The operator-product expansion(OPE) could be employed to obtain the lowest-order, nonlocal quark scalar condensate component of gluon vacuum polarization. In particular, nonlocal quark scalar condensate can be calculated by solving Dyson-Schwinger Equation(DSE) of QCD. Then, field-theoretic aspects of the gluon vacuum polarization and nonperturbative gluon propagator will be considered in the Landau gauge of the Lorentz gauge fixing. The gluon propagator we obtained is finite in the infrared domain where the single gluon mass mg can be determined. Our results of the ratio mg/ΛQCD the range of that from 1.33 to 1.39 agree with previous determinations for this ratio. Besides, the analytic structure of the gluon propagators from the OPE's result is explored. Our numerical analysis of the gluon' Schwinger function finds clear evidence of the positivity violations in the gluon propagator. In addition, a new method for obtaining the chemical potential dependence of the gluon vacuum polarization and the dressed gluon propagator is developed. © 2021, CC BY.

关键词： Polarization

来源：评论

学校读者我要写书评

暂无评论

Plate Shape Prediction Based on Data-Driven in Roll Quenching Process

Plate Shape Prediction Based on Data-Driven in Roll Quenchin...

引用

Chinese Automation Congress (CAC)

作者： Liu Hu Luefeng Chen Jie Hu Min Wu Witold Pedrycz Kaoru Hirota School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems and the Engineering Research Center of Intelligent Technology for Geo-Exploration School of Automation Ministry of Education China University of Geosciences Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton Canada Systems Research Institute Polish Academy of Sciences Warsaw Poland The Department of Computer Engineering Istinye University Sariyer/Istanbul Turkey Tokyo Institute of Technology Yokohama Japan The Tokyo Institute of Technology Tokyo Japan

In the process of steel plate production, predicting the plate shape is of great significance for producing high-quality and consistently stable plate shapes. This paper presents a model that predicts both the defect types and flatness of the plate, providing theoretical support for setting process parameters in roller quenching production. First, the parameters of the quenching process are analyzed to identify their characteristics. Then, the K-Means clustering algorithm and correlation analysis are employed to process the quenching process parameters. A gradient boosting decision tree (GBDT) model is used to predict the defect types and flatness of the steel plates. Finally, industrial production data is utilized for experimental validation. The obtained experimental results verify the reliability of the proposed method.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Circulating Load Ratio Prediction Model Based on Clustering Sag Milling Operating Conditions

SSRN

引用

SSRN 2024年

作者： Liao, Zhenhong Xu, Ce Chen, Wen Wang, Feng She, Jinhua School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China Department of Mineral Resources Development and Utilization Changsha Research Institute of Mining and Metallurgy CO. LTD. Changsha410012 China School of Engineering Tokyo University of Technology Tokyo192-0982 Japan

Grinding in mineral processing is used to control the ore at the technically feasible and economically optimum particle size to achieve mineral liberation for separation. A circulating-load ratio (CLR) during a semi-autogenous grinding (SAG) milling process is critical for controlling particle size and energy consumption. This paper presents a CLR-prediction model based on clustering SAG milling operating conditions. First, operating parameters affecting the CLR are identified by comprehensively analyzing the complex mechanism and characteristics of a typical industrial SAG milling ***, a method is developed to cluster operating conditions of the SAG milling process based on the power consumption and CLR of the process. The method reveals the actual physical significance of each operating condition. Then, the support vector regression (SVR) is used to model the CLR in each operating condition. After that, a distance-based model integration strategy is designed to determine the weights of each SVR model to predict the CLR. Finally, integrating the SVR submodels yields a CLR prediction model. Actual run data demonstrated the accuracy and effectiveness of the model in predicting CLR. This method has significant practical value for improving SAG milling efficiency and is applicable to other complex industrial processes. © 2024, The Authors. All rights reserved.

关键词： Particle size

来源：评论

学校读者我要写书评

暂无评论

Fast control Strategy of Grid-forming Inverter Based on Power Feedforward

Fast Control Strategy of Grid-forming Inverter Based on Powe...

引用

Chinese control Conference (CCC)

作者： Sheng Zhang Zhijian Fang Qine Liu Muchao Xiang Dingbang Huang School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China State Grid Hubei Electric Power Co. Ltd Xiangyang Power Supply Company Xiangyang China Electric Power Scientific Research Institute of State Grid Hubei Electric Power Co. Ltd Wuhan China

Grid-forming inverter is widely used in grid-connected systems of distributed generation because of its frequency and voltage support capacity and good stability in microgrid, but its large inertia will affect the dynamic response speed of grid-forming inverter. In order to solve this problem, this paper introduces the loop that affects the dynamic response of grid-forming inverter, and carries out small signal modeling for active loop, analyzes the dynamic performance indicators and determinants of typical second-order system. Thus, a method of adding power feedforward coefficient to the forward channel of the power loop is designed, and the response speed of the system with or without feedforward coefficient under the unit step response is compared. Finally, the simulation results show that adding the power feedforward coefficient can improve the response speed of the grid-forming inverter during startup and power switching, then achieves the effect of fast control.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Skeleton-Based Multi-Stream Adaptive Graph Convolutional Network for Indoor Scene Action Recognition

Skeleton-Based Multi-Stream Adaptive Graph Convolutional Net...

引用

Chinese Automation Congress (CAC)

作者： Jiazhuo Li Luefeng Chen Min Li Min Wu Witold Pedrycz Kaoru Hirota School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems and the Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education School of Automation China University of Geosciences Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton AB Canada Polish Academy of Sciences Systems Research Institute Warsaw Poland Department of Computer Engineering Istinye University Sariyer/Istanbul Turkey Tokyo Institute of Technology Yokohama Japan Tokyo Institute of Technology Tokyo Japan

With the rapid advances in computer vision, human action recognition has gradually received attention, but the current methods still exhibit some problems in indoor environments. The human skeleton, as the framework of human motion, contains high-quality actional feature information, and the skeleton-based action recognition method effectively avoid the interference of interior background noise and has advantages in indoor action recognition. The outstanding effect of graph convolutional networks on graph structure data processing has led to its rapid development and wide application in skeleton-based action recognition. Second-order skeletal information also contains a large number of actional features but is not effectively utilized. The artificial predefined topology of the human skeleton map has limitations, and cannot reflect the interaction between limbs. To solve the above problems, this article designs an adaptive weighted multi-stream graph convolutional network (AM-GCN) based on skeletal information, using an attention mechanism to enhance the network's ability to extract actional features, and an adaptive layer to make the construction graph more flexible, incorporating second-order skeletal features through a dual-stream architecture. In this article, the NTU-RGB+D dataset has been used for the experiments, the results show that the method in this article has good results.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Multi-robot Path Planning and Trajectory Smoothing

Multi-robot Path Planning and Trajectory Smoothing

引用

IEEE International Conference on Automation Science and Engineering (CASE)

作者： Hub Ali Gang Xiong Huaiyu Wu Bin Hu Zhen Shen Hongxing Bai School of Mechanical and Electrical Engineering University of Electronic Science and Technology of China State Key Laboratory for Management and Control of Complex Systems Institute of Automation Chinese Academy of Sciences Beijing China Guangdong Engineering Research Center of 3D Printing and Intelligent Manufacturing Cloud Computing Center Chinese Academy of Sciences Dongguan China Beijing Engineering Research Center of Intelligent Systems and Technology Institute of Automation Chinese Academy of Sciences China Hubei Jointown Technology Co. Ltd Artificial Intelligence Research Institute Wuhan China

ISBN: (数字)9781728169040

ISBN: (纸本)9781728169057

In this paper we consider a problem in task execution for multi-robot trajectory planning with collision avoidance in a shared working environment. Consider two or more robots generating trajectories towards their respective goal positions. The collision may occur if their trajectory coordinates are intersecting at a point or follow the same path segment simultaneously. The central planner is introduced to control robot motion in the collision state and to reduce the complexity of the multi-robot path planning system. The global path for every robot is generated by the $\mathrm{A}^{*}$ algorithm in a grid-based environment. The path has presented a sequence of optimal grid numbers and later transformed into Cartesian coordinates for smooth trajectory generation. The central planner takes an optimal grid sequence for every robot to analyze the collision state according to its cost value. It regenerates the trajectories to minimize the complexity cost value and replaces the previous trajectory based on minimum cost value. In the collision state, the central planner allows one robot at a time to pass along the conflict path segment and hold others in queue at a safety offset distance until the previous robot passes safely. The algorithm has been applied to robots working in a shared environment in complex maps and the simulations is performed with MATLAB to calculate the efficiency of this approach for handling collision states in a multi-robot path planning system.

关键词： Robot kinematics Trajectory Collision avoidance Task analysis Resource management

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：