检索结果-内蒙古大学图书馆

Adaptive event-triggered set-membership formation of heterogeneous multi-agent systems with application to omnidirectional robots

引用

control Engineering Practice 2025年 162卷

作者： Xiao, Zehui Zhang, Daotong Tao, Jie School of Automation Guangdong University of Technology Guangzhou510006 China Guangdong Provincial Key Laboratory of Intelligent Decision and Cooperative Control Guangzhou510006 China Guangdong-Hong Kong Joint Laboratory for Intelligent Decision and Cooperative Control Guangzhou510006 China School of Electrical and Mechanical Engineering The University of Adelaide AdelaideSA 5005 Australia

This article focuses on the leader-following formation control for heterogeneous multi-agent systems against actuator saturation and switching topologies. To save limited agent resources, a novel adaptive event-triggered strategy is evolved to regulate the update frequency of controller, such that some unnecessary data processing can be avoided. Different from the conventional adaptive strategy where the tracking error is simply regarded as the triggering benchmark, a transformation law is introduced in this work to develop an adaptive triggering benchmark, which provides greater potential for the triggering condition to save computational resources to a greater extent. Then, the formation control protocols are proposed by introducing the set-membership concept. Subsequently, considering the saturation constraints, optimization problems of the set-membership formation control are established to ensure that the tracking errors are always restrained to the desired ellipsoids. For achieving the leader-following formation, an online recursive algorithm based on the optimization problems is consequently provided such that the set-membership controllers meeting the ellipsoidal state sets can be continuously obtained. Finally, the superiority and applicability of the proposed method were validated through numerical simulations and its implementation on an omnidirectional robot platform. © 2025 Elsevier Ltd

关键词： Set theory

来源：评论

学校读者我要写书评

暂无评论

Hand Gesture Recognition from an Open-Set Perspective

引用

IEEE Transactions on Multimedia 2025年

作者： Zhou, Jun Xu, Chi Cheng, Li China University of Geosciences School of Automation Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems China Ministry of Education Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China University of Alberta Vision and Learning Laboratory Department of Electrical and Computer Engineering EdmontonABT6G 2R3 Canada

Existing hand gesture recognition methods predominantly rely on a close-set assumption, which in essence limits the viewpoints, gesture categories, and hand shapes at test time to closely resemble those seen during training. This requirement is however rarely met in practice, as images are often captured from unconstrained viewpoints, with novel gestures and unseen hand shapes that can differ significantly from the training data. This motivates us to investigate an open-set hand gesture recognition problem, where hand gestures are still recognizable from unconstrained viewpoints, and novel gesture classes and hand shapes can be incrementally learned with just a few examples. To address this, we propose a viewpoint influence elimination network that extracts view-independent features, significantly improving performance in scenarios with unconstrained viewpoints. Moreover, a joint-weighted classification scheme is introduced to augment the cosine similarity metric for evaluating few-shot incremental learning of novel gestures and shapes. Finally, as existing hand gesture recognition datasets primarily adhere to the close-set assumption, a new hand gesture recognition dataset, OHG, is introduced in this paper, that includes a wide range of viewpoints, diverse gesture classes, and distinct hand shapes. Experimental hand gesture recognition results demonstrate the superior performance of our approach in both unconstrained viewpoint and few-shot incremental learning scenarios. The source code and the OHG dataset are to be made available at https://***/zhoujun-7/OSHGR. © 1999-2012 IEEE.

关键词： Palmprint recognition

来源：评论

学校读者我要写书评

暂无评论

Asymptotic stability of fractional linear discrete-time equations with arbitrary time delays

引用

The European Physical Journal Special Topics 2025年 1-18页

作者： Liu, Chong Wu, Guo-Cheng Hou, Hu-Shuang School of Mathematics and Statistics Guizhou University Guiyang People’s Republic of China Key Laboratory of Intelligent Analysis and Decision on Complex Systems Chongqing University of Posts and Telecommunications Chongqing People’s Republic of China School of Mathematical Sciences Sichuan Normal University Chengdu People’s Republic of China

This paper introduces a class of Caputo fractional difference equations with arbitrary time delays. It provides non-negative conditions of the Mittag-Leffler function solutions. Exact solutions of fractional linear difference equations are obtained by Picard’s method, and stability conditions are given by the Z-transform. Finally, such results are extended to h-fractional difference equations. This study reveals the time delay’s effect on the dynamics of fractional difference equations and the stable regions. It also provides necessary and sufficient conditions for neural networks and control.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Improving Performance of Repetitive control for Nonlinear systems via Improved Disturbance Compensation

引用

IEEE Transactions on Industrial Informatics 2025年

作者： Tian, Shengnan Wang, Yibing Zhang, Manli Li, Yang Lu, Chengda Liu, Kang-Zhi She, Jinhua Wu, Min China University of Geosciences School of Automation Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China Chiba University Department of Electrical and Electronic Engineering Chiba263-8522 Japan Tokyo University of Technology School of Engineering Hachioji192-0982 Japan

In practice, repetitive control (RC) is a type of learning control that exhibits good tracking performance. However, existing nonlinear RC methods lack analysis and design of the learning property, which results in limited performance. This study addresses the learning-enhanced issue. First, a new fuzzy Lyapunov candidate is constructed for stability analysis, which contains an integral term associated with the membership function and a double integral term. The design of the learning-dependent term integrates the nonlinear membership function information, which enhances the learning ability. Second, an additional first-order low-pass filter is incorporated into the conventional equivalent input disturbance estimator. The new filter acts as an integrator that adjusts the bandwidth of the disturbance compensation and gradually eliminates the disturbances in the output error. Third, a recursive optimization algorithm is used to design the controllers. Experimental comparisons on motor drive systems demonstrate the effectiveness and superiority of the method. © 2005-2012 IEEE.

关键词： Membership functions

来源：评论

学校读者我要写书评

暂无评论

A Gaze-Guided Human Locomotion Intention Recognition and Volitional control Method for Knee-Ankle Prostheses

引用

IEEE Transactions on Cognitive and Developmental systems 2025年

作者： Chen, Xinxing Chen, Zhaokai Wang, Yuxuan Yin, Shucong Chen, Chuheng Huang, Jian Fu, Chenglong Huazhong University of Science and Technology Key Laboratory of Image Processing and Intelligent Control Hubei Key Laboratory of Brain-inspired Intelligent Systems School of Artificial Intelligence and Automation Wuhan430074 China Southern University of Science and Technology Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities Shenzhen518055 China Shanghai Jiaotong University Shanghai China

This paper presents a novel gaze-guided volitional control method for knee-ankle prostheses, designed to enhance the precision and intuitiveness of prosthetic control in complex locomotion tasks. The method utilizes an eye-tracking system coupled with an RGBD camera to estimate 3D gaze points, which are then used to construct a gaze attention map. This map serves as the basis for predicting human locomotion intentions, enabling the prosthesis to accurately step on the intended foot placement. Experimental validation was conducted with both a healthy subject and an amputee subject, focusing on level-ground walking and stair ascent tasks. The results demonstrated that the prosthesis could achieve precise foot placement, with a mean error of 1.22 cm ± 3.14 cm for the healthy subject and 3.40 cm ± 0.66 cm for the amputee subject during level-ground walking. In stair ascent tasks, the system successfully adapted to various gait patterns, with the prosthetic joint angles closely matching natural human movements. The proposed method also effectively reduced the root mean square error (RMSE) of 3D gaze estimation to 2.70 cm, 2.63 cm, and 1.97 cm along the x, y, and z axes, respectively. These findings indicate that the gaze-guided volitional control method not only enhances the functionality of knee-ankle prostheses but also offers a more intuitive interface for users, aligning prosthetic actions with the user’s visual focus and intentions. © 2016 IEEE.

关键词： Knee prostheses

来源：评论

学校读者我要写书评

暂无评论

Incipient fault diagnosis method for silicon single crystal growth assisted by deep learning

引用

CrystEngComm 2025年第21期27卷 3480-3491页

作者： Liu, Yu-Yu Liu, Ding Ren, Jun Chao Wu, Shi Hai School of Automation and Information Engineering Xi'an University of Technology Xi'an710048 China Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi'an China

In this study, an accurate diagnostic classification algorithm based on a deep belief network and entropy value (C-DBN-E) incorporating signal decomposition, entropy theory and deep belief network (DBN) network is proposed to address the problem of tiny faults that may occur during the growth of silicon single crystals (SSC). The study is divided into three stages: feature selection, fault feature extraction and fault pattern classification. In the feature selection stage, the recursive feature elimination (RFE) method based on support vector machine (SVM) is employed to rank features according to their importance and eliminate redundant features. In the subsequent feature extraction stage, the adaptive decomposition theory is introduced to select components that contain a greater number of fault features for signal reconstruction. The deep features of the reconstructed signal are then mined in depth using a DBN and supplemented with energy entropy and multi-scale arrangement entropy as supplementary features to further refine the capture of tiny fault information. Finally, all the features are integrated and inputted into the SVM classifier to enable accurate classification of micro-fault modes in SSC growth. The effectiveness of the method in distinguishing micro-faults in the SSC growth process is verified by simulation results. This study is of great significance in solving the problem of fault diagnosis in the SSC growth system, which is expected to contribute to the improvement of work performance and the reduction of accident risk and economic loss. © 2025 The Royal Society of Chemistry.

关键词： Image reconstruction

来源：评论

学校读者我要写书评

暂无评论

A Task Assignment Scheme Designed for Online Urban Sensing Based on Sparse Mobile Crowdsensing

引用

IEEE Internet of Things Journal 2025年

作者： Zeng, Hongjian Xiong, Yonghua She, Jinhua Yu, Anjun China University of Geosciences School of Automation Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Ministry of Education Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China Tokyo University of Technology School of Engineering Hachioji Tokyo192-0982 Japan Jiangxi Ganyue Expressway Co. Ltd Jiangxi Nanchang330000 China

Sparse Mobile Crowdsensing (SMCS) achieves urban-scale environmental sensing by assigning tasks to workers in specific subareas and inferring global data from the collected information. However, the effectiveness of SMCS is often limited because many studies overlook workers' mobility and data collection time during subarea selection, as well as the time constraints of the sensing cycle in task assignment. This may affect the task completion timeliness and data quality. To address these issues, we develop a subarea evaluation method based on deep reinforcement learning, considering both the temporal effectiveness of sensing tasks and the importance of subarea selection for data inference. Using the subarea evaluation values derived from this method, we establish an online urban sensing task assignment model which is subject to constraints of sensing cycle time and cost budget. This model aims to find the task assignment result that minimizes data inference error by maximizing the comprehensive utility value. Considering the characteristics of the task assignment model, we propose an evolutionary algorithm named OTA-EA, which is based on an improved genetic algorithm. Its enhanced evolutionary operators can avoid generating infeasible solutions while maintaining robust search and optimization performance. Lastly, we conduct experimental evaluations of these methods on the real-world datasets. The results demonstrate that our subarea evaluation method can significantly reduce the data inference error, and our evolutionary task assignment algorithm can achieve better task assignment results than the baseline algorithms. © 2014 IEEE.

关键词： Genetic algorithms

来源：评论

学校读者我要写书评

暂无评论

Path Planning for Distribution Network Robots with Adaptive Simulated Annealing-Enhanced Artificial Potential Field Method 26

Path Planning for Distribution Network Robots with Adaptive ...

引用

26th International Conference on Industrial Technology, ICIT 2025

作者： Zhang, Baichao Chen, Xin Chen, Jinge Li, Jinbin Wang, Xiaokai Jian, Xu School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China State Grid Hubei Electric Power Co. Ltd. Electric Power Science Research Institute Wuhan430077 China Hubei Fangyuan Dongli Electric Power Science Research Co. Ltd Wuhan430077 China

ISBN: (纸本)9798331521950

In this paper, we propose a hybrid algorithm that combines an improved Artificial Potential Field (APF) method with the Simulated Annealing (SA) algorithm for path planning of an electric power operation robot manipulator in complex distribution grid environments. To address the unreachable target issue inherent in traditional APF, we introduce a distance regulation factor to optimize the repulsive function. This modification allows the manipulator to smoothly approach the target point as it nears, while the repulsion from obstacles gradually decreases. Additionally, to overcome the limitations of the traditional SA algorithm, such as its tendency to get trapped in local minimum solutions and its inefficiency in complex environments, we propose an adaptive temperature rise strategy. This strategy increases the temperature, enhancing the probability of escaping local optimal solutions. When the APF algorithm becomes trapped in a local optimum, the improved SA algorithm is applied to escape the local minimum. Once the local optimum is avoided, the algorithm switches back to APF to continue the path planning process. Simulation results demonstrate that the proposed improved APF-SA algorithm adapts effectively to various complex environments, achieving shorter planning times and higher success rates compared to traditional APF and SA algorithms. It successfully resolves the unreachable target and local minimum problems associated with APF. Finally, the feasibility of the proposed APF-SA fusion algorithm is validated through experiments conducted on an electric power operation robot experimental platform for distribution grid applications. © 2025 IEEE.

关键词： Motion planning

来源：评论

学校读者我要写书评

暂无评论

Load Prediction Model of Gas Boiler Generator Set Based on CNN-LSTM 11th

Load Prediction Model of Gas Boiler Generator Set Based on...

引用

11th International Symposium on Computational Intelligence and Industrial Applications, ISCIIA 2024

作者： Xu, Yan Wu, Min Hu, Jie Peng, Fu-Sheng Zhang, Wen Song, Wen-Shuo Li, Hui-Hang School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

ISBN: (纸本)9789819647521

With the proposal of carbon peak and carbon neutrality targets and the construction of a new power system, improving energy efficiency and reducing carbon emissions have become the key to the sustainable development of industrial boiler generator sets. However, the current load scheduling of gas boiler power plants is mainly based on manual experience, which limits achieving more efficient and stable operation. Accurate short-term load forecasting can help dispatchers to make reasonable production schedules. Therefore, this paper proposes a hybrid load forecasting model for generator sets based on convolutional neural networks combined with long short-term memory networks. First, the Isolation Forest algorithm eliminates anomalies in the historical data set. Then, variables related to unit load are selected by combining mechanistic analysis with the Spearman algorithm. Considering the multiple operating conditions and high complexity of unit loads, the CNN-LSTM network is used to fully extract the spatial and temporal characteristics to build the load prediction model. Finally, experiments are conducted using actual production data, showing that the proposed method is effectiveness. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2025.

关键词： Electric load dispatching

来源：评论

学校读者我要写书评

暂无评论

Sliding mode control based guidance law with impact angle constraint

引用

Chinese Journal of Aeronautics 2014年第1期27卷 145-152页

作者： Zhao Yao Sheng Yongzhi Liu Xiangdong School of Automation Beijing Institute of Technology Key Laboratory for Intelligent Control & Decision of Complex Systems Beijing Institute of Technology

The terminal guidance problem for an unpowered lifting reentry vehicle against a sta- tionary target is considered. In addition to attacking the target with high accuracy, the vehicle is also expected to achieve a desired impact angle. In this paper, a sliding mode control （SMC）-based guidance law is developed to satisfy the terminal angle constraint. Firstly, a specific sliding mode function is designed, and the terminal requirements can be achieved by enforcing both the sliding mode function and its derivative to zero at the end of the flight. Then, a backstepping approach is used to ensure the finite-time reaching phase of the sliding mode and the analytic expression of the control effort can be obtained. The trajectories generated by this method only depend on the initial and terminal conditions of the terminal phase and the instantaneous states of the vehicle. In order to test the performance of the proposed guidance law in practical application, numerical simulations are carried out by taking all the aerodynamic parameters into consideration. The effec- tiveness of the proposed guidance law is verified by the simulation results in various scenarios.

关键词： Backstepping Impact angle Sliding mode control Terminal guidance Unpowered lifting reentryvehicle

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：