检索结果-内蒙古大学图书馆

Optimization of Robot End-Effector Load Gravity Compensation for Unmanned Live Work in Electric Power Distribution Networks Based on Improved PSO Algorithm

Optimization of Robot End-Effector Load Gravity Compensation...

引用

2023 China automation Congress, CAC 2023

作者： Chen, Jinge Chen, Xin Hu, Chenyu Huang, Guangxian Sun, Shu Jian, Xu School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Ministry of Education Engineering-Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China State Grid Hubei Electric Power Co. Ltd. Xianning Power Supply Company Distribution Department Xianning437000 China State Grid Hubei Electric Power Co. Ltd. Electric Power Science Research Institute Equipment Technology Center Wuhan430077 China

ISBN: (纸本)9798350303759

In the field of electric power distribution network operation, most tasks involve contact operations. A key technology to enable the flexible operation of robots in live distribution network tasks is the installation of six-dimensional force sensors on the robot's end flange. These sensors allow the robot to perceive external environmental contact forces. However, the presence of the end load interferes with the accurate perception of external forces. Aiming at the gravity compensation of robot end load, an optimization algorithm of gravity compensation based on particle swarm optimization is proposed. In this method, the optimal solution model is established with the objective of minimum sum of squared errors, and the particle swarm optimization algorithm is used to estimate the mounting declination angle of the force sensor and improve the precision of gravity compensation. The experiments show that the proposed method can effectively reduce the maximum gravity compensation error and the average gravity compensation error in each direction after optimization, in which the maximum gravity compensation error of the resultant force is reduced by 9.11% and the average gravity compensation error of the resultant force is reduced by 12.34%. © 2023 IEEE.

关键词： Error compensation

来源：评论

学校读者我要写书评

暂无评论

Preassigned-Time Synchronization of Memristive Chaotic Circuit via Intermittent control

Preassigned-Time Synchronization of Memristive Chaotic Circu...

引用

Neuromorphic Computing (ICNC), International Conference on

作者： Qiming Wang Leimin Wang Genping Wu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Wuhan Second Ship Design and Research Institute Wuhan China

In this paper, the preassigned-time synchronization (PTS) problem for a fifth-order memristive chaotic circuit (MCC) is investigated by designing a time-dependent intermittent controller. First, the dynamic characteristics of the MCC, especially the existence and occurrence of chaos, are investigated by simulation experiments. Besides, the stability of the equilibrium points is discussed by using Routh-Hurwitz criterion. Then, a time-dependent intermittent controller is designed and the PTS of MCC is realized via the presented controller. Finally, the effectiveness of theoretical results is verified by means of numerical simulations.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RAG-based Crowdsourcing Task Decomposition via Masked Contrastive Learning with Prompts

arXiv

引用

arXiv 2024年

作者： Yang, Jing Wang, Xiao Zhao, Yu Liu, Yuhang Wang, Fei-Yue The State Key Laboratory for Management and Control of Complex Systems Institute of Automation Chinese Academy of Sciences Beijing100190 China The School of Artificial Intelligence University of Chinese Academy of Sciences Beijing100049 China The School of Artificial Intelligence Anhui University Hefei266114 China Qingdao Academy of Intelligent Industries Qingdao230031 China National Key Laboratory of Information Systems Engineering National University of Defense Technology China Macau University of Science and Technology 999078 China Beijing Engineering Research Center of Intelligent Systems and Technology Chinese Academy of Sciences Beijing100098 China State Key Laboratory for Management and Control of Complex Systems Chinese Academy of Sciences Beijing100190 China

Crowdsourcing is a critical technology in social manufacturing, which leverages an extensive and boundless reservoir of human resources to handle a wide array of complex tasks. The successful execution of these complex tasks relies on task decomposition (TD) and allocation, with the former being a prerequisite for the latter. Recently, pre-trained language models (PLMs)based methods have garnered significant attention. However, they are constrained to handling straightforward common-sense tasks due to their inherent restrictions involving limited and difficult-to-update knowledge as well as the presence of "hallucinations". To address these issues, we propose a retrieval-augmented generation-based crowdsourcing framework that reimagines TD as event detection from the perspective of natural language understanding. However, the existing detection methods fail to distinguish differences between event types and always depend on heuristic rules and external semantic analyzing tools. Therefore, we present a Prompt-Based Contrastive learning framework for TD (PBCT), which incorporates a prompt-based trigger detector to overcome dependence. Additionally, trigger-attentive sentinel and masked contrastive learning are introduced to provide varying attention to trigger and contextual features according to different event types. Experiment results demonstrate the competitiveness of our method in both supervised and zero-shot detection. A case study on printed circuit board manufacturing is showcased to validate its adaptability to unknown professional domains. Copyright © 2024, The Authors. All rights reserved.

关键词： Semantics

来源：评论

学校读者我要写书评

暂无评论

A Segmented Sliding Window-Based Comprehensive Periodic Feature Extraction Method for APT Classification

A Segmented Sliding Window-Based Comprehensive Periodic Feat...

引用

International Conference on control and automation (ICCA)

作者： Wei Song Tiejun Wu Ya Zhang School of Software Southeast University Nanjing China Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Nanjing China School of Cyber Science and Engineering Southeast University. School of Automation Southeast University Nanjing China

ISBN: (数字)9798350354409

ISBN: (纸本)9798350354416

This paper studies the classification problem of Advanced Persistent Threat (APT) attacks and proposes a comprehensive periodic feature extraction method based on sliding window division. A new data processing approach is proposed. Considering the characteristics of APT attacks, the life cycle of APT traffic data is divided into three stages. The traffic data from each stage is sampled in a piecewise manner and divided into separate training and testing sets, and then the training and testing subsets are merged. For the integrated sets, a sliding window-based partition approach is employed to obtain training and testing window samples, while extracting features from each individual sample. Then, this paper proposes a differential-based periodic feature extraction methodology to capture the dynamic information present in APT traffic and integrate it with fundamental static features, thereby forming effective comprehensive features. After combining these static and differential features, a comprehensive foundation is established for model training. Finally, the effectiveness of the algorithm is verified using decision tree model, and its superiority is demonstrated by comparing it with traditional partition methods based on data streams.

关键词： Training Heuristic algorithms Feature extraction Data models Partitioning algorithms Classification algorithms decision trees

来源：评论

学校读者我要写书评

暂无评论

A distributed high-density resistivity meter working on a two-wire cable 3

A distributed high-density resistivity meter working on a tw...

引用

2020 3rd International Symposium on Power Electronics and control Engineering, ISPECE 2020

作者： Dong, Xiquan Luo, Wang Wang, Hongpeng Ge, Jian Liu, Huan Dong, Haobin School of Automation China University of Geosciences Wuhan Hubei430074 China Hubei Key Laboratory of Advance Control and Intelligent Automation for Complex Systems Wuhan Hubei430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan Hubei430074 China

High-density resistivity meter is a common instrument used in shallow geophysical exploration. At present, the structure of the centralized high-density resistivity meter is bulky, while the distributed instrument needs more than 7 core cables, and the long measuring line needs to relay power supply to the intelligent electrode to provide enough voltage, so it is not convenient to use in the field. Aiming at the above problems, a new type of distributed high-density meter is developed, which can realize the power supply, communication, and measurement functions of distributed high-density meter and carry out multi-channel measurement through the time-division multiplexing of a two-wire cable and the short-time power supply of supercapacitor. Finally, the performance of the instrument was verified by experiments. © Published under licence by IOP Publishing Ltd.

关键词： Cables

来源：评论

学校读者我要写书评

暂无评论

USV Path Planning Based on ACO-SA Algorithm

USV Path Planning Based on ACO-SA Algorithm

引用

Chinese control Conference (CCC)

作者： Chuanshang Luo Yifeng Tang Zhihui Huang Yifan Xu Bin Liu Hai-Tao Zhang the Engineering Research Center of Autonomous Intelligent Unmanned Systems the Key Laboratory of Image Processing and Intelligent Control and the State Key Laboratory of Digital Manufacturing Equipment and Technology School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan China

This paper solves USV path planning problem constrained by multiple factors via ant-colony optimization algorithm. First, this paper uses the ways of multi-objective optimization to model the USV path planning problem. An improved ant colony algorithm named ACO-SA is put forward afterwards to effectively solve the problem. The algorithm is a combination of ACO algorithm(ant colony algorithm) and SA algorithm(simulated annealing algorithm), which has three improments: change the initial distribution of pheromone to guide the search when the algorithm has just started running; change the heuristic function and state transition probability taking three factors into consideration; change the pheromone update rule and make the ants compete for the right to update pheromone by simulated annealing algorithm, and update the best solution by the same algorithm. Finally, simulation experiment and field experiment are conducted to check the validity of ACO-SA algorithm.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Signal conditioning and quality estimation method of Overhauser magnetometer 4

Signal conditioning and quality estimation method of Overhau...

引用

4th International Symposium on Power Electronics and control Engineering, ISPECE 2021

作者： Zheng, Lidong Dong, Haobin Luo, Wang Ge, Jian Liu, Huan School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advance Control and Intelligent Automation for Complex China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

ISBN: (数字)9781510650374

ISBN: (纸本)9781510650367

Overhauser magnetometer reaches an ultra-high accuracy benefit from the outputted frequency of free induction decay transversal signal is proportional to the magnetization on measuring the real scalar geomagnetic field. Nevertheless, the magnitude of the accuracy is an important factor that severely affects the validity of geomagnetic field data. Since the real value of the geomagnetic field is unknown, we propose a measurement quality estimation method through analyzing the envelope of the free induction decay transversal signal from the Overhauser magnetometer. The estimation model includes the SNR and the decay slope characteristics of the signal is indicated in an two-digit number changes from 00∼99. The results demonstrated that the proposed estimation method can effective performance the reliability of magnetometer measurement data in our experiments. © COPYRIGHT SPIE. Downloading of the abstract is permitted for personal use only.

关键词： Magnetometers

来源：评论

学校读者我要写书评

暂无评论

WDNet: A Water Depth Perception Network with Global Information

WDNet: A Water Depth Perception Network with Global Informat...

引用

Chinese control Conference (CCC)

作者： Zhihui Huang Yifeng Tang Chuancong Tang Yifan Xu ChuanShang Luo Bin Liu Hai-Tao Zhang the Key Laboratory of Image Processing and Intelligent Control and the State Key Laboratory of Digital Manufacturing Equipment and Technology School of Artificial Intelligence and Automation the Engineering Research Center of Autonomous Intelligent Unmanned Systems Huazhong University of Science and Technology Wuhan China

Deep perception of the unmanned surface vehicle's surroundings is an inaccessible part of its fully autonomous navigation mission. The existing methods, whether based on traditional stereo matching or deep learning, do not fully consider the characteristics of water environment, resulting in severe error depths in weak textures (sky, calm lake) and water reflections regions, that increases the risk of running aground or collision. What is worse that there is not a public dataset for depth estimation in the water environment. Therefore, this work proposes a self-supervised model for depth estimation named Water Depth Perception Network (WDNet) to address these problems. The decoder of this network has a wider receptive field and can effectively handle the depth error in the weak texture region. Besides, the WDNet is trained with a novel and effective loss function which assist the network to reduce errors in sky and water region, and some indexes are proposed to evaluate the model's performances in sky and water region. Finally, our proposed WDNet achieves a 0.1056 absolute relative error in ranging, the average number of error pixels in the sky area drops from 15803.87 to 580.91, which only accounted for 0.29% of the image, and the error in water region drops from 51.04 to 6.75, all of them are superior to the performance of baseline model.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Koopman Operator Learning control of the Piezoelectric Actuator

Koopman Operator Learning Control of the Piezoelectric Actua...

引用

Chinese control Conference (CCC)

作者： Xiang Huang Hai-Tao Zhang Engineering Research Center of Autonomous Intelligent Unmanned Systems the Key Laboratory of Image Processing and Intelligent Control and the State Key Laboratory of Digital Manufacturing Equipment and Technology School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan China

The piezoelectric actuator is one kind of device that can drive nanoscale motion. However, the nonlinear hysteresis effect induced by its natural material greatly degrades its positioning accuracy. To handle this challenging issue, this work develops a Koopman model predict control (Koopman- MPC) framework for the piezoelectric actuator. Specifically, the Koopman operator theory is adapted for modeling the piezoelectric actuator dynamics. A simple yet powerful linear model spanned in a high-dimensional space is thus constructed to characterize the hysteresis dynamics. Subsequently, upon the established Koopman model, an MPC scheme is put forward for tracking control of piezoelectric actuators. Therein, by sustained optimizing a cost function containing future outputs and control increments, the control input is obtained. Moreover, extensive tracking simulations are carried out on a simulated piezoelectric actuator for verifying the feasibility and effectiveness of the Koopman- Mpc scheme.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Distributed Coverage control of Multi-Agent systems with Load Balancing in Non-convex Environments

arXiv

引用

arXiv 2022年

作者： Zhai, Chao Fan, Pengyang School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

It is always a challenging task to service sudden events in non-convex and uncertain environments, and multi-agent coverage control provides a powerful theoretical framework to investigate the deployment problem of mobile robotic networks for minimizing the cost of handling random events. Inspired by the divide-and-conquer methodology, this paper proposes a novel coverage formulation to control multi-agent systems in the non-convex region while equalizing the workload among subregions. Thereby, a distributed coverage controller is designed to drive each agent towards the desired configurations that minimize the service cost by integrating with the rotational partition strategy. In addition, a circular search algorithm is proposed to identify optimal solutions to the problem of lowering service cost. Moreover, it is proved that this search algorithm enables to approximate the optimal configuration of multi-agent systems with the arbitrary small tolerance. Finally, numerical simulations are implemented to substantiate the efficacy of proposed coverage control approach. Copyright © 2022, The Authors. All rights reserved.

关键词： Multi agent systems

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：