检索结果-内蒙古大学图书馆

A New Method for Deriving Weights in Group Fuzzy Analytic Hierarchy Process and Evaluation Measures

IFAC-PapersOnLine 2020年第2期53卷 7941-7946页

作者： Lin Che Yeming Zhang Jingcheng Wang Miaoshun Bai Dept. of Automation Shanghai Jiaotong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai 200240 China Shanghai Municipal Engineering Design Institute (Group) Co. Ltd. China Autonomous Systems and Intelligent Control International Joint Research Center Xi’an Technological University Xi’an Shaanxi 710021 China

The paper discusses fuzzy comparison matrices, consistency check, weight prioritization methods and weight evaluation methods in fuzzy group analytic hierarchy process. There are various methods of weight prioritization, however, they are not critically evaluated. In the paper, two measures are introduced for the evaluation of the group weights. Then, a new method is proposed to improve the process of deriving weights and use it in an application compared to another common three methods. Our results show that the new method is a good method for deriving weights of indexes.

关键词： Group Fuzzy AHP Ari-Geo Method Assessment Measure Fuzzy Consistency Check Triangular Fuzzy Number

来源：评论

学校读者我要写书评

暂无评论

A hybrid model based on stacking and multi-correction mechanisms for urban water demand prediction ⁎

引用

IFAC-PapersOnLine 2020年第2期53卷 16685-16690页

作者： Yang Lan Jingcheng Wang Miaoshun Bai Ibrahim Brahmia Haotian Xu Piao Hu Yuhao Long Yeming Zhang Dept. of Automation Shanghai Jiaotong University Key Laboratory of System Control and Information Processing Ministry of education of China Shanghai 200240 China. Autonomous Systems and Intelligent Control International Joint Research Center Xi’an Technological University Xi’an Shaanxi710021 China. Shanghai Municipal engineering Design Institute (Group) Co. Ltd.

Water demand prediction is the key link for the effective operation of urban intelligent water supply system. Since the non-linearity and complex variability of water consumption, it is difficult for traditional water demand prediction models to guarantee high accuracy for a long period. Different holiday types and even tiny changes in temperatures can affect urban water demand seriously. This paper proposes a Stacking-based hybrid model which integrates multi-correction mechanisms to address these problems. A better stacking model is proposed to minimize the generalization error. The stability and reliability of predictions are improved through the design of multi-correction mechanisms such as high temperature weather compensation feature, holiday-type correction model and water quantity fluctuation correction model. Comparing different models before and after stacking also before and after correcting, the prediction accuracy of the proposed hybrid model is much higher and the predictions are more stable and reliable.

关键词： Water supply system Prediction methods Hybrid models Stacking methods Multi-correction mechanisms Neural-network models Time-series analysis

来源：评论

学校读者我要写书评

暂无评论

Adaptive control for Fractional-order Interconnected systems

Adaptive Control for Fractional-order Interconnected Systems

引用

第三十八届中国控制会议

作者： Bingyun Liang Shiqi Zheng Zichao Yang Feng Liu School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation fo Complex Systems

This paper focuses on a class of fractional-order interconnected system. A decentralized adaptive controller is designed based on the fractional Lyapunov direct method. In order to solve the interactions between subsystems, a compensation term is presented. In addition, the various uncertainties, such as unknown parameters, disturbances and nonlinear functions, are considered and estimated by the proposed fractional-order update laws. Especially, neural networks are adopted to approximate the unknown nonlinear functions. Furthermore, a fractional-order auxiliary system is constructed to deal with the input nonlinearities with backlash and saturation. Finally, the effectiveness of the proposed control scheme is verified by some simulation examples.

关键词： Adaptive control fractional-order system interconnected system input nonlinearity neural networks

来源：评论

学校读者我要写书评

暂无评论

Voltage Sensitivity of Tag Antennas for Inductively Coupled RFID systems

引用

Journal of Physics: Conference Series 2021年第1期1738卷

作者： Cheng Jin Jixuan Zhu School of Automation China University of Geosciences (Wuhan) Wuhan 430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan 430074 China

This paper describes a parameter of voltage sensitivity to recognize the performance differences of tag antennas for inductively coupled RFID systems. Based on the equivalent circuit model of the RFID tag and reader, an expression for the voltage sensitivity is educed. Then, the design steps of measuring platform to obtain the voltage sensitivity of tag antenna are introduced in detail. Finally, the feasibility of the proposed method was verified with the market available tag antennas through the measuring platform.

关键词：

来源：评论

学校读者我要写书评

暂无评论

MatchMesh: Knowledge-based 3D Point Cloud Meshing Using Divide-and-conquer Deformation

MatchMesh: Knowledge-based 3D Point Cloud Meshing Using Divi...

引用

IEEE International Conference on Networking, Sensing and control

作者： Ying Tang Shengtao Sun Ben Wu Rowan University Glassboro USA State Key Laboratory of Management and Control for Complex Systems Institute of Automation Chinese Academy of Sciences Beijing China Institute of Smart Education Qingdao Academy of Intelligent Industries Qingdao China Rowan University Glassboro NJ USA

ISBN: (数字)9781728168555

ISBN: (纸本)9781728168562

The reconstruction of surface mesh from point cloud is compute-intensive but also very important step in the remanufacturing and personalization industries. With more 3D scanners providing lower cost and higher resolution, further detailed point clouds can be gathered without so much effort as before. In manufacturing, there are databases which contain the origin 3D design models of the products. How to utilize the design model data for swift production of related products remains a problem for remanufacturing and customization. In order to develop a knowledge-based way of handling this problem, editing or deforming an existing mesh to match the target is an effective way of easing the workload. In this paper, we introduce a divide-and -conquer process which segments the depth scan data and then find the best match in the database as its source of deformation. The segmentation is performed on 3D point level using global features extracted by 3D CNN. After that we find best match to our knowledge with the same features to acquire a fast meshing of the target object by deforming the existing parts from the match. The deformation of parts are being done sequentially. For further performance improvement, we present a deformation training method employing transfer learning on segment editing process.

关键词： Training Surface reconstruction Three-dimensional displays Databases Knowledge based systems Feature extraction Strain

来源：评论

学校读者我要写书评

暂无评论

Two-DOF Speed control of Permanent Magnet Synchronous Machine with a novel Parameter Identification Method

Two-DOF Speed Control of Permanent Magnet Synchronous Machin...

引用

第三十九届中国控制会议

作者： Mingjin Hu Wei Hua Xudong Wu Chengdong Wu Dazhi Wang Zhentao Liu Xiaofang Yuan Wennong Zhang School of Electrical Engineering Southeast University Faculty of Robot Science and Engineering Northeastern University College of Information Science and Engineering Northeastern University Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems College of Electrical and Information Engineering Hunan University

In this paper, a two-degree-of-freedom（2-DOF） speed control scheme for permanent magnet synchronous machines is developed. Both the reference-tracking and disturbance rejection performance are taken into account and only a single parameter related to expected bandwidth determines the dynamics. To improve the performance of speed control, a novel identification method for mechanical parameters is also proposed. The effectiveness of the proposed method is verified by simulations.

关键词： Speed control two-degree-of-freedom permanent magnet synchronous machine parameter identification

来源：评论

学校读者我要写书评

暂无评论

Sequence impedance modeling of droop-controlled inverter

Sequence impedance modeling of droop-controlled inverter

引用

8th Renewable Power Generation Conference (RPG 2019)

作者： You Hu Jiajun Wang Bin Liu Zhen Li Xiangdong Liu School of Automation and Key Laboratory for Intelligent Control & Decision on Complex Systems Beijing Institute of Technology Beijing 100081 China

ISBN: (数字)9781839531248

ISBN: (纸本)9781839531255

The grid-connected three-phase inverter is an indispensable part of the microgrid. The droop control is widely used in parallel inverters for high reliability and flexibility. The output impedance of droop controlled inverters plays an vital role in its stability. However, the sequence impedance model of grid-connected inverter is currently based on the grid side converter with a single current loop control exdluding the low-frequency dynamics similar in doubly fed induction generators. Both the droop control and voltage loop control greatly affect the stability of inverter, specifically in the low frequency response. This paper proposes a sequence impedance model of inverter, which considers the droop control and voltage and current dual closed-loop control using the harmonic linearization method in the frequency domain. The accuracy of the model is verified through comparing the measurement impedance value in simulation with the impedance value calculated in the sequence impedance model. The influence of control method on system impedance is verified by showing the difference between the single loop controlled inverter and droop control inverter.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Position control of a Planar Single-Link Flexible-Link Manipulator Based on Enhanced Dynamic Coupling Model ⁎

引用

IFAC-PapersOnLine 2020年第2期53卷 7777-7782页

作者： Qingxin Meng Jundong Wu Ze Yan Chun-Yi Su School of Automation China University of Geosciences Wuhan Hubei 430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan Hubei 430074 China Department of Mechanical Industrial and Aerospace Engineering Concordia University Montreal QC H3G 1M8 Canada

Position control of a planar single-link flexible-link manipulator always faces huge challenges due to the underactuated characteristic of the system and the vibration of the flexible link. Since the system state variables related to the vibration is underactuated, this paper considers enhancing the dynamic coupling of this system. An enhanced dynamic coupling model is established by making equivalent transformation for the real dynamic model of the system. This enhanced dynamic coupling model makes the vibration variables appear as active variables in the proposed energy-based controller. Therefore, the proposed controller achieves good vibration suppression effect. The stability analysis is presented to prove that the proposed controller can effectively achieve the position control objective, and the simulation results further demonstrate the superiority of the proposed control method.

关键词： Flexible-link manipulator underactuated system enhanced dynamic coupling position control vibration control

来源：评论

学校读者我要写书评

暂无评论

An Enhanced Fault Diagnosis Method with Uncertainty Quantification Using Bayesian Convolutional Neural Network

An Enhanced Fault Diagnosis Method with Uncertainty Quantifi...

引用

IEEE International Conference on Automation Science and Engineering (CASE)

作者： Qihang Fang Gang Xiong Xiuqin Shang Sheng Liu Bin Hu Zhen Shen State Key Laboratory for Management and Control of Complex Systems Institute of Automation Chinese Academy of Sciences School of Artificial Intelligence University of Chinese Academy of Sciences Beijing Engineering Research Center of Intelligent Systems and Technology Institute of Automation Guangdong Engineering Research Center of 3D Printing and Intelligent Manufacturing Cloud Computing Center Chinese Academy of Sciences China

ISBN: (数字)9781728169040

ISBN: (纸本)9781728169057

Fault diagnosis is a vital technique to pinpoint the machine malfunctions in manufacturing systems. In recent years, the deep learning techniques greatly improve the fault detection accuracy, but there still remain some problems. If one fault is absent in the training data or the fault signal is disturbed by severe noise interference, the fault classifier may misjudge the health state. This problem limits the reliability of the fault diagnosis in real applications. In this paper, we enhance the fault diagnosis method by using Bayesian Convolutional Neural Network (BCNN). A Shannon entropy-based method is presented to quantify the prediction uncertainty. The BCNN turns the deterministic predictions to probabilistic distributions and enhances the robustness of the fault diagnosis. The uncertainty quantification method helps to indicate the wrong predictions, detect unknown faults, and discover the strong disturbances. Then, a fine-tuning strategy is applied to enhance the model performance further. The potential usability of the proposed method in monitoring the motors of 3D printers is studied. And the experiment is conducted on a motor bearing dataset provided by Case Western Reserve University. The proposed BCNN achieves 99.82% fault classification accuracy over nine health conditions. Its robustness is verified by comparing the testing accuracy with three other methods on the noisy datasets. And the uncertainty quantification method successfully detects the outlier inputs.

关键词： Fault diagnosis Uncertainty Bayes methods Circuit faults Robustness Predictive models Noise measurement

来源：评论

学校读者我要写书评

暂无评论

Artificial lateral line based longitudinal separation sensing for two swimming robotic fish with leader-follower formation*

Artificial lateral line based longitudinal separation sensin...

引用

2019 IEEE/RSJ International Conference on intelligent Robots and systems (IROS)

作者： Xingwen Zheng Manyi Wang Junzheng Zheng Runyu Tian Minglei Xiong Guangming Xie The State Key Laboratory for Turbulence and Complex Systems Intelligent Biomimetic Design Lab College of Engineering Peking University Beijing China

Lateral line system (LLS) is a sensory organ system which serves functions in varieties of flow-relative fish behaviors. Inspired by excellent performances of LLS in fish behaviors, multiple artificial lateral line systems (ALLSs) have been designed and applied to promote underwater robot technology. In this article, we focus on using ALLS for longitudinal separation sensing between two adjacent swimming robotic fish whose tails oscillate, and meanwhile the two fish are towed with a precisely controlled speed which equals to the rectilinear speed of freely-swimming robotic fish with the same oscillating parameters. Flow visualizations based on dye injection technique, hydrogen bubble technique, and computational fluid dynamics simulation are conducted to study the distribution characteristics of the vortices caused by the robotic fish. In addition, towing tank experiments are conducted for investigating the qualitative relationships between the longitudinal separations and the ALLS-measured HPVs of the two robotic fish. This work provide a guidance for the application of ALLS in relative states sensing of underwater robot group composed of two or more individuals, which has been rarely explored.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：