检索结果-内蒙古大学图书馆

The Analysis of Muscle-Synergy Similarity between Walking and Pedaling Based on Variational Mode Decomposition and Non-Negative Matrix Factorization

The Analysis of Muscle-Synergy Similarity between Walking an...

引用

IEEE International Conference on engineering, Technology and Innovation

作者： Wangyang Ge Jinhua She Shijie Guo Feng Wang Juan Zhao Seiichi Kawata School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China School of Engineering Tokyo University of Technology Hachioji Tokyo Japan Engineering Research Center of the Ministry of Education for Intelligent Rehabilitation Equipment and Detection Technologies Hebei Key Laboratory of Robot Sensing and Human-Robot Interaction Tianjin China School of Mechanical Engineering Hebei University of Technology Tianjin China

ISBN: (数字)9798350362435

ISBN: (纸本)9798350362442

Pedaling lower-limb rehabilitation robots are widely used in various stages of lower-limb rehabilitation because of their high safety and low requirements for patients' lower-limb strength. Researchers found that the activation sequence of the surface electromyographic (sEMG) signals of the muscles of the lower limb during pedaling is very similar to that of walking, which makes it possible to simulate the muscle force generation during walking by changing the pedal load during pedaling training. However, most pedaling lower-limb rehabilitation robots use constant loads, and it is of great importance to study the relationship between load and muscle synergy and to design load phase angle trajectories with higher muscle synergy consistency in the walking-pedaling motion to optimize the training effect of pedal-type rehabilitation robots. In this paper, we used variational mode decomposition (VMD) and nonnegative matrix factorization (NMF) to extract the muscle synergy features in each band of sEMG during walking and pedaling and to study the similarity of pedaling and walking and the influence of pedal load on muscle synergy consistency.

关键词： Legged locomotion Training Technological innovation Time series analysis Muscles Assistive robots Feature extraction Trajectory Safety Matrix decomposition

来源：评论

学校读者我要写书评

暂无评论

Finite-Time Continuous Terminal Sliding-Mode Speed control of Micro Gas Turbine System with Mismatched Disturbances

Finite-Time Continuous Terminal Sliding-Mode Speed Control o...

引用

Chinese Automation Congress (CAC)

作者： Yanjun Sun Long Xu Ning Chen Shihua Li School of Automation Southeast University Nanjing China Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Nanjing China China Electric Power Research Institute Nanjing China

ISBN: (纸本)9781665426480

The micro gas turbine system acts as a key role in distributed renewable generation systems due to its flexibility, versatility, and low emissions. This paper focuses on the micro gas turbine speed control problem, which primarily determines the fuel flow for the turbine under variable load conditions. Due to nonlinear factors in MGTS, such as the coupling between systems parameters, and external disturbances such as electric load variation, it is a challenge to realize accurate speed control. In this paper, a continuous terminal sliding-mode control law based on a finite-time disturbance observer is designed for micro gas turbine control system. In this method, the integral of high-frequency switching function is introduced to control law. It guarantees the continuity of control signal and alleviates the chattering problem. Besides, the linear sliding mode surface is replaced by a full-order terminal sliding mode surface, and it obtains finite-time convergence and smaller speed tracking error. Furthermore, disturbance estimates are used in control law to eliminate the adverse effect of disturbances on control performance, which improves disturbance rejection ability. Finally, simulation comparison with conventional sliding-mode control validates the advantages of the composite controller.

关键词： Renewable energy sources Simulation Velocity control Switches Load management Disturbance observers Fuels

来源：评论

学校读者我要写书评

暂无评论

TransTracking for UAV: An Autonomous Real-time Target Tracking System for UAV via Transformer Tracking

TransTracking for UAV: An Autonomous Real-time Target Tracki...

引用

Intelligent Technology and Embedded systems (ICITES), International Conference on

作者： Xiaolou Sun Fei Xie Qi Wang Yuncong Yao Hao Wang Wei Wang Wankou Yang Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education School of Automation Southeast University Nanjing China School of Automation Nanjing University of Information Science and Technology Nanjing China

Most of the existing Siamese-type trackers usually adopt pre-defined anchor boxes or anchor-free schemes to accurately estimate the bounding box of targets. Unfortunately, they suffer from complicated hand-designed components and tedious post-processings. It is not easy to adjust parameters for unique scenes in real applications. So, we propose a new scheme by formulating visual tracking as a direct set prediction problem to alleviate this issue. The main component is a transformer attached to the Siamese-type feature extraction networks. Thus, our new framework can be summarized as Siamese Network with Transformers (SiamTFR). With a fixed small set of learned object queries, we force the final set of predictions via bipartite matching, significantly reducing hyper-parameters associated with the candidate boxes. Due to the unique predictions of this framework, we significantly ease the heavy burden of hyper-parameters search of post-processings in visual tracking. Extensive experiments on visual tracking benchmarks, including GOT-10K, demonstrate that SiamTFR achieves competitive performance and runs at 50 FPS. Specifically, SiamTFR outperforms leading anchor-based tracker SiamRPN++ in the GOT-10K benchmark, confirming its effectiveness and efficiency. Furthermore, SiamTFR is deployed on the embedded device in which the algorithm can be run at 30FPS or 54FPS with TensorRT meeting the real-time requirements. In addition, we design the complete tracking system demo that can work in the real road to narrow the gap between the academic models and industrial deployments.

关键词： Performance evaluation Visualization Target tracking Embedded systems Roads Force Benchmark testing

来源：评论

学校读者我要写书评

暂无评论

An Improved YOLOv5 Detection Algorithm with Pruning and OpenVINO Quantization

An Improved YOLOv5 Detection Algorithm with Pruning and Open...

引用

Chinese Automation Congress (CAC)

作者： Cheng Chen Yahui Gan Zao Han Huan Gao Ang Li Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education School of Automation Southeast University NanJing China Nanjing YingQi Intelligent Technology Co. Ltd. Intel Joint Research Institute on Intelligent Edge Computing NanJing China Nanjing YingQi Intelligent Technology Co. Ltd. Intel Joint Research Institute on Intelligent Edge Computing NanJing China

In order to address the problem of current object detection models being too large to be deployed on robot controllers, this paper proposes improvements to YOLOv5 for real-time detection. The YOLOv5s model is pruned at the Batch Normalization (BN) layer, and further optimized using the OpenVINO tool for quantization. The results demonstrate that our improvements effectively improve the model's inference speed while maintaining its accuracy. Compared to the original YOLOv5 model, the pruned model achieves the same accuracy without degradation, with a 36.6% reduction in parameter count and a 35% reduction in weight storage file size. Furthermore, after optimization with OpenVINO, the final model achieves a FPS of 56.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Fault Diagnosis for Wind Turbine Flange Bolts Based on One-Dimensional Depthwise Separable Convolutions

引用

The International Journal of Intelligent control and systems 2024年第1期29卷 42-47页

作者： Yongchao Liu Shuqing Dong Qingfeng Wang Wenhe Cai Ruizhuo Song Qinglai Wei North China Electric Power Test and Research Institute China Datang Corporation Science and Technology Research Institute Company LimitedBeijing 100040China School of Automation and Electrical Engineering University of Science and Technology BeijingBeijing 100083China School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100040China State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China Institute of Systems Engineering Macao University of Science and TechnologyMacao 999078China

In this paper,a new bolt fault diagnosis method is developed to solve the fault diagnosis problem of wind turbine flange bolts using one-dimensional depthwise separable *** main idea is to use a one-dimensional convolutional neural network model to classify and identify the acoustic vibration signals of bolts,which represent different bolt damage *** the methods of knock test and modal simulation,it is concluded that the damage state of wind turbine flange bolt is related to the natural frequency distribution of acoustic vibration *** is found that the bolt damage state affects the modal shape of the structure,and then affects the natural frequency distribution of the bolt vibration ***,the damage state can be obtained by identifying the natural frequency distribution of the bolt acoustic vibration *** the present one-dimensional depth-detachable convolutional neural network model,the one-dimensional vector is first convolved into multiple channels,and then each channel is separately learned by depth-detachable convolution,which can effectively improve the feature quality and the effect of data *** the perspective of the realization mechanism of convolution operation,the depthwise separable convolution operation has fewer parameters and faster computing speed,making it easier to build lightweight models and deploy them to mobile devices.

关键词： Wind turbine flange bolts one-dimensional convolutional neural network(1DCNN)model depthwise separable convolutions damage identification

来源：评论

学校读者我要写书评

暂无评论

Multimodal Image Matching based on Frequency-domain Information of Local Energy Response

arXiv

引用

arXiv 2025年

作者： Yang, Meng Chen, Jun Gong, Wenping Wei, Longsheng Tian, Xin School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China Faculty of Engineering China University of Geosciences Wuhan430074 China Electronic Information School Wuhan University Wuhan430072 China

Complicated nonlinear intensity differences, nonlinear local geometric distortions, noises and rotation transformation are main challenges in multimodal image matching. In order to solve these problems, we propose a method based on Frequency-domain Information of Local Energy Response called FILER. The core of FILER is the local energy response model based on frequency-domain information, which can overcome the effect of nonlinear intensity differences. To improve the robustness to local nonlinear geometric distortions and noises, we design a new edge structure enhanced feature detector and convolutional feature weighted descriptor, respectively. In addition, FILER overcomes the sensitivity of the frequency-domain information to the rotation angle and achieves rotation invariance. Extensive experiments multimodal image pairs show that FILER outperforms other state-of-the-art algorithms and has good robustness and *** Codes 68U10 (Primary), 68T45, 68Wxx (Secondary) Copyright © 2025, The Authors. All rights reserved.

关键词： Mathematical transformations

来源：评论

学校读者我要写书评

暂无评论

A Two-layer Adaptive control Strategy for Photovoltaic Power in Different Scenarios

A Two-layer Adaptive Control Strategy for Photovoltaic Power...

引用

Energy engineering and Power systems (EEPS), International Conference on

作者： Yanghui Wan Jiahao Yan Tianfeng Chu Yaping Li Kun Yuan Kaifeng Zhang Key Laboratory of Measurement and Control of Complex System of Engineering Ministry of Education Southeast University Nanjing China Power Automation Department China Electric Power Research Institute(Nanjing) Nanjing China Electric Power Research Institute State Grid Liaoning Electric Power Co. Ltd. Shenyang China

Currently, control strategies for distributed photovoltaic (PV) power generation are relatively single and rigid, and cannot flexibly adapt to the diverse demands of power grids in different scenarios. Firstly, this paper analyzes the adaptive relationship between different dispatching demands, the regulation ability of distributed PV, and the characteristics of the local voltage. Secondly, for different scenarios, the coordinated controller determines the reference values of active power and reactive power given to the inverter. Thus, distributed PV power control modes which can adapt to different scenarios have been established. Then, these control modes can be classified into single control modes and compound control modes according to the complexity of scenario demands. On this basis, a specific two-layer adaptive control strategy and process of distributed PV power generation in a low-voltage distribution network are further proposed, which takes into account both external demands of the distribution network and the regulation ability of distributed PV. Finally, a case study is given to verify the rationality and effectiveness of the two-layer adaptive scenarios control strategy. This strategy can effectively improve the comprehensive support ability of distributed PV power generation towards the power grid in multiple scenarios, and improve the stable operation level of the regional power grid.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Robust control of Feeding Speed in Coal Seam Drilling Process Considering Borehole Friction

Robust Control of Feeding Speed in Coal Seam Drilling Proces...

引用

Chinese Automation Congress (CAC)

作者： Xiao Liu Luefeng Chen Chengda Lu Haipeng Fan Min Wu Witold Pedrycz School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems School of Automation China University of Geosciences Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton AB Canada Systems Research Institute Polish Academy of Sciences Warsaw Poland Department of Computer Engineering Istinye University Istanbul Turkey

ISBN: (数字)9798350368604

ISBN: (纸本)9798350368611

During the coal seam drilling process, the drill string is subject to compressive deformation, compounded by unpredictable variations in formation hardness and borehole wall friction, leading to challenges in maintaining a stable feeding speed. This paper presents a novel approach by introducing uncertain parameters to describe the effects of formation hardness and borehole wall friction. Drill string axial movement model is modeled as a polyhedral system based on a lumped parameter representation. To meet industrial performance requirements, we design a robust $H_{\infty}$ controller to achieve consistent feeding speed control. Our simulation results demonstrate the controller's effectiveness in ensuring system stability despite fluctuations in formation hardness and drill string friction.

关键词： Drilling Robust control Friction Simulation Geology Velocity control Stability criteria Process control Coal Output feedback

来源：评论

学校读者我要写书评

暂无评论

Safe Reinforcement Learning for Social Motor Coordination in Two Dimensional Space

Safe Reinforcement Learning for Social Motor Coordination in...

引用

IEEE International Conference on Industrial Technology (ICIT)

作者： Fan Yang Yuening Huang Chao Zhai Hehong Zhang China University of Geosciences Wuhan Campus School of Automation Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Rice University George R. Brown School of Engineering and Computing Houston Texas United States Fuzhou University School of Computer and Data Science Fuzhou China

ISBN: (数字)9798331521950

ISBN: (纸本)9798331521967

This paper presents an interactive motion control method based on reinforcement learning, designed to assist children with autism who have social motor impairments through a mirror game intervention. The virtual teacher uses the Deep Deterministic Policy Gradient (DDPG) algorithm to optimize its actions, guiding the participant to follow a Lissajous trajectory. To ensure safety, a motion-correction mechanism was developed, which automatically adjusts actions when the predicted trajectory surpasses predefined safety boundaries. The reward function considers both the distance between the virtual teacher and the target trajectory, as well as the distance between the virtual teacher and the participant, with dynamic adjustments applied by the motion-correction mechanism. Experimental results demonstrate that the virtual teacher effectively guides the participant towards the target trajectory while adhering to safety constraints.

关键词： Autism Filters Reinforcement learning Games Variable speed drives Motors Trajectory Safety Mirrors Motion control

来源：评论

学校读者我要写书评

暂无评论

A Low-Cost Enhanced Heterogeneous Barrier Construction Method for Multi-Target Intrusion Monitoring

引用

IEEE Sensors Journal 2025年

作者： Ye, Jing Xiong, Yonghua Dong, Haobin Yu, Anjun She, Jinhua China University of Geosciences School of Automation Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Ministry of Education Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China Jiangxi Ganyue Expressway Company Ltd Nanchang330200 China Tokyo University of Technology School of Engineering Tokyo192-0982 Japan

In multi-target intrusion monitoring, heterogeneous nodes may overlap due to different sensing ranges. Additionally, excessively long barriers will increase the cost of barriers and reduce the number of barriers. To address these issues, this article proposes a distributed method for constructing weighted heterogeneous barriers using depth-first search and learning automata (WHBDLA). It designs a dynamically weighted coverage graph based on the non-overlap rate and horizontal displacement. The proposed method considers multiple heterogeneous properties. It uses several intrusion targets to identify the boundaries of local sub-regions while avoiding the cost increase and quantity decrease caused by long barriers. WHBDLA combines the advantages of depth-first search and the reinforcement learning mechanism to adaptively construct heterogeneous barriers in sub-regions with unknown faults. The algorithm initially searches for potential barrier path nodes and then activates nodes with sufficient energy and high weights. Finally, it monitors and repairs the barriers. Comparative experiments and analyses indicate that the proposed method increases the number of barriers, reduces node costs, and decreases running time. © 2001-2012 IEEE.

关键词： Reinforcement learning

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：