检索结果-内蒙古大学图书馆

International Conference on control, Automation, Robotics and Vision (ICARCV)

作者： Yizhou Sun Ya Zhang School of Cyber Science and Engineering Southeast University Nanjing China Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Nanjing China School of Automation Southeast University Nanjing China

ISBN: (纸本)9781665476881

In this study, an adaptive controller for Cyber-Physical systems(CPSs) subjected to cyberattacks is proposed to track a class of target system with unknown inputs and states. Firstly, an estimation strategy is proposed to adaptively estimate the unknown inputs and states of target on the basis of finite impulse response (FIR) filter. Secondly, due to the existence of cyberattacks in CPSs, an adaptive tracking control scheme with designed compensation signal is constructed to stabilize the system performance which might be damaged by attacks, where Lyapunov function related to adaptive estimated factor is adopted to prove that the CPSs are able to track the target under attacks. In the last part, a numerical experiment is implemented to demonstrate the validity of the theoretical results.

关键词： Target tracking Adaptive systems Finite impulse response filters System performance Estimation Lead control systems

来源：评论

学校读者我要写书评

暂无评论

Iterative assist-as-needed control with interaction factor for rehabilitation robots

引用

Science China(Technological Sciences) 2021年第4期64卷 836-846页

作者： CAO Ran CHENG Long YANG ChenGuang DONG Zhe School of Artificial Intelligence University'of Chinese Academy of SciencesBeijing 100049China State Key Laboratory for Management and Control of Complex Systems Institute of Automation.Chinese Academy of SciencesBeijing 100190China School of Automation Science and Engineering South China University of TechnologyGuangzhou 510641China School of Electrical and Control Engineering North China Universityof TechnologyBeijing 100144China

Rehabilitation robots for stroke patients have drawn considerable attention because they can reduce the economic and labor costs brought by traditional rehabilitation. control methods for rehabilitation robots have been developed to stimulate the active motion of patients and to improve the effectiveness of rehabilitation care. However, current control methods can only roughly adjust the system’s stiffness and may fail in achieving satisfactory performance. To this end, this paper introduces a novel cost function consisting of the tracking error term and the stiffness term. The cost function contains an interaction factor that represents the patient’s motion intention to balance the weight of these two terms. When the patients try to actively do training tasks, the weight of stiffness term increases, which leads to the larger allowable tracking error and lower stiffness eventually. An iterative updating law of the stiffness matrix is given to reduce the proposed cost function. Theoretical analysis based on the Lyapunov theory is given to ensure the feasibility of the proposed algorithm. Furthermore, a force estimation is used to improve interaction control performance. Finally, simulation experiments are provided to show the effectiveness of the proposed algorithm.

关键词： human-robot interaction impedance stiffness control rehabilitation

来源：评论

学校读者我要写书评

暂无评论

Economic Research on User-Side Photovoltaic Energy Storage System Considering Shared Energy Storage 5

Economic Research on User-Side Photovoltaic Energy Storage S...

引用

5th International Conference on Power and Energy Technology, ICPET 2023

作者： Chen, Kaiwen Wang, Qingyi Kang, Kai Wang, Hao School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China PowerChina Hubei Electric Engineering Co. Ltd Wuhan China Wuhan Second Ship Design and Research Institute Wuhan China

ISBN: (纸本)9798350339673

Based on the background of photovoltaic development in the whole county and the demand for energy storage on the user-side, this paper establishes an economic evaluation model of user-side photovoltaic energy storage system considering shared energy storage. Firstly, three schemes of no energy storage, independent energy storage and shared energy storage are proposed, and the influence of photovoltaic energy storage system loss on annual power generation is considered. Secondly, based on the whole life cycle theory, the cost and benefit model of the user-side photovoltaic energy storage system is established, and the unit electricity cost of the user is used as the evaluation index. Finally, the relevant data of user in Hubei area are analyzed as an example to verify the effectiveness of the model and provide reference for the investment of related projects. © 2023 IEEE.

关键词： photovoltaic energy storage system shared energy storage the unit electricity cost of the user user-side

来源：评论

学校读者我要写书评

暂无评论

Manual Alignment of Dual End-Effectors for Piezo-Driven Microhand

Manual Alignment of Dual End-Effectors for Piezo-Driven Micr...

引用

IEEE International Conference on Real-time Computing and Robotics (RCAR)

作者： Jichao Pang Dan Liu Xiaoqing Tang Yan Chen Qiang Huang Tatsuo Arai Xiaoming Liu Beijing Advanced Innovation Center for Intelligent Robots and Systems and School of Mechatronical EngineeringBeijing Institute of Technology Key Laboratory of Biomimetc Robots and Systems Ministry of Education State Key Laboratory of Intelligent Control and Decision of Complex System Beijing China Center for Neuroscience and Biomedical Engineering The University of Electro-Communications Tokyo Japan

ISBN: (数字)9798350372601

ISBN: (纸本)9798350372618

In recent years, micromanipulator with dual end-effectors called microhand has been widely used in industrial and biological fields. Whether the tip positions of the two end-effectors of the microhand can be accurately aligned seriously affects the precise grasping of the microhand. However, few researchers have presented practical ways for precisely aligning the tip positions of a 6-DOF microhand’s two end- effectors. This paper proposes a novel, inexpensive, lightweight, robust, and easy-to-use microhand dual end-effectors clamping device that can precisely and quickly align the two end-effectors of a 6-DOF microhand. First, we describe the microhand dual end-effectors clamping device’s lightweight structural design. After that, we simplify the microhand dual end-effectors clamping device model and create a mathematical model to determine the relationship between the end-effectors’ tip position and the rotation angles of screw No.1, screw No.2, screw No.3 of the microhand dual end-effectors clamping device. Through experimentation, we are able to attain precise alignment of the two end-effectors tip positions of the 6-DOF microhand, so we confirm that our mathematical model is true. Finally, we use the impulse response of PZT in the microhand’s lower module to confirm the stability of the microhand dual end- effectors clamping device. We believe that the proposed the microhand dual end-effectors clamping device has great potential in industrial and biological applications as a universal tool for precise alignment of the tip positions of the two end-effectors of a 6-DOF microhand.

关键词： Costs Accuracy Fasteners End effectors 6-DOF Mathematical models Biology

来源：评论

学校读者我要写书评

暂无评论

Research on the treatment method of COVID-19 sequelae with intelligent soft manipulator based on haptic feedback

Research on the treatment method of COVID-19 sequelae with i...

引用

2023 IEEE International Conference on Real-Time Computing and Robotics, RCAR 2023

作者： Huang, Zixin Li, Xinpeng Deng, Jie Li, Yun Wan, Xiao Wang, Lejun Nankai University School of Electrical and Information Engineering Wuhan Institute of Technology Collage of Artificial Intelligence China Wuhan Institute of Technology School of Electrical and Information Engineering Wuhan China Hubei University of Chinese Medicine Hubei Provincial Hospital of Traditional Chinese Medicine Wuhan China Chongqing University of Posts and Telecommunications Chongqing Key Laboratory of Complex Systems and Bionic Control Chongqing China

ISBN: (纸本)9798350327182

Soft manipulator has the advantages of high degree of freedom, strong adaptability, high safety, good man-machine interaction ability, and has a wide range of application prospects in the medical field. In the treatment of traditional Chinese medicine, acupoint therapy can effectively treat diseases and avoid the side effects of drug therapy. Acupoint therapy can be used to treat the sequelae of the elderly in the post-COVID-19 era. Inspired by this, this paper designs and produces an intelligent soft manipulator. Such manipulator can realize the function of acupoint physiotherapy for part of human body through the pressure drive, and realize the real-time feedback function through the sensor to feedback the pressure signal to the upper position machine. Such manipulator provides a feasible treatment method for the sequelae of COVID-19 through physical therapy. © 2023 IEEE.

关键词： COVID-19

来源：评论

学校读者我要写书评

暂无评论

Identification and Prediction of Microvascular Invasion in Hepatocellular Carcinoma Based on Multiple Sequence Fusion Images

Identification and Prediction of Microvascular Invasion in H...

引用

Chinese control Conference (CCC)

作者： Mingguang Lu Yuan Zhu School of Automation China University of Geosciences Wuhan Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan China

ISBN: (数字)9789887581581

ISBN: (纸本)9798350366907

Hepatocellular carcinoma (HCC) is one of the most difficult diseases to be treated fundamentally in the medical field in today’s world, and the recurrence rate of HCC has been increasing year by year in recent years. The study on the identification and prediction of microvascular invasion phenomenon (MVI) in hepatocellular carcinoma is beneficial to the postoperative prevention of hepatocellular carcinoma patients, which can greatly improve the survival probability of patients after surgery. In this study, a new MVI prediction method (MSF-GWO-GPR) was proposed, which combines the multi-sequence image features of imaging histology, sifts out the unimportant features through the T-test method and the dimensionality reduction of Lasso regression, and establishes the multi-sequence Gaussian process regression (GPR) prediction model for data fusion, and combined with the Gray Wolf Optimization (GWO) algorithm to design a suitable optimization objective function to optimize the hyper-parameters in the GPR, in order to get better prediction results. Compared with the existing methods, the data from different sequences of MRI images are selected for fusion in this study, which makes the feature data richer and more complete, and the model applicability is better; moreover, by optimizing the hyperparameters in the model through the GWO, the model can be made more accurate, reduce the risk of misidentified prediction, and improve the accuracy rate. The experimental results show that MSF-GWO-GPR outperforms widely used machine learning methods in terms of accuracy, F1 score, precision, recall and AUC metrics. This may provide a new idea for the identification and prediction of MVI in hepatocellular carcinoma.

关键词： Liver cancer Accuracy Magnetic resonance imaging Prevention and mitigation Surgery Predictive models Feature extraction

来源：评论

学校读者我要写书评

暂无评论

Hot Spot Detection of Photovoltaic Module Infrared Near-field Image based on Convolutional Neural Network 4

Hot Spot Detection of Photovoltaic Module Infrared Near-fiel...

引用

2022 4th International Conference on Energy systems and Electrical Power, ICESEP 2022

作者： Fan, Fu Na, ZhiXiong Zhang, ChangZhi Li, HaoRan Tong, ChaoLiu School of Computer Science and Technology Beijing Institute of Technology Beijing100081 China State Grid e-commerce Co. Ltd Beijing100053 China State Grid Tianjin Electric Power Company Tianjin300010 China Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education School of Automation Southeast University Nanjing210096 China

With the installation and use of large-scale photovoltaic systems around the world, the detection of photovoltaic system operation and maintenance has become increasingly important. This research uses a convolutional neural network training model to detect and classify the infrared near-field images of photovoltaic modules from small-scale photovoltaic plants in the laboratory. This model classifies the images into two categories: with and without hot spots, with a classification accuracy of 96.58%. The experimental results show that the convolutional neural network training model has a good classification result. © 2022 Institute of Physics Publishing. All rights reserved.

关键词： Convolutional neural networks

来源：评论

学校读者我要写书评

暂无评论

Anomaly detection in digital twin model 1

Anomaly detection in digital twin model

引用

1st IEEE International Conference on Digital Twins and Parallel Intelligence, DTPI 2021

作者： Wang, Yutong Cao, Yansong Wang, Fei-Yue Institute of Automation Chinese Academy of Sciences The State Key Laboratory for Management and Control of Complex Systems Beijing China Macau Institute of Systems Engineering Macau University of Science and Technology China

ISBN: (纸本)9781665433372

As the simulation model of a physical system, digital twin has been widely used in many complicated control systems. Providing an effective way to perform simulation, digital twin makes the evaluation, prediction and optimization process cheaper and easier than on physical systems. For smart manufacturing, digital twin achieves high productivity with less operation and maintenance cost. However, the advantages of digital twin in anomaly detection during manufacturing are always neglected. Taking a two-speed transmission system as an example, we generate three kinds of faults on this digital twin model. After extracting features from the system output, we train an anomaly detection model on these features to classify each type of fault. By this digital twin model, we can find the fault in the whole system at the very beginning, and reduce the time and cost of debugging and diagnosing. © 2021 IEEE.

关键词： Anomaly detection

来源：评论

学校读者我要写书评

暂无评论

An Error Correcting Output Code Algorithm Based on Hierarchical Clustering for Lithology Identification

An Error Correcting Output Code Algorithm Based on Hierarchi...

引用

Chinese control Conference (CCC)

作者： Ao Li Xi Chen School of Rail Transit Hunan University of Technology Zhuzhou China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education

ISBN: (数字)9789887581581

ISBN: (纸本)9798350366907

Lithology identification serves as a crucial foundation for the precise exploration and safe exploitation of geological resources. However, challenges arise from the inherent imbalance and overlap present in logging data, making the accurate identification of lithology a complex task. Addressing these challenges effectively, this paper introduces a novel algorithm, the Error Correcting Output Code algorithm based on Hierarchical Clustering(HC-ECOC). The proposed algorithm initially formulates a coding matrix using distance and overlap measures between class clusters. Subsequently, it extends the length of the coding matrix by considering both the accuracy of the integrated classifier and the diversity among base classifiers. To evaluate the efficacy of the proposed method, comparisons were conducted with alternative algorithms using UCI datasets and an authentic lithology dataset. The results unequivocally demonstrate the superior performance of our algorithm.

关键词： Codes Accuracy Geology Clustering algorithms Binary trees Encoding Classification algorithms

来源：评论

学校读者我要写书评

暂无评论

A High-Dynamic and Ultra-Low Pressure Sensor with a Novel Beam-Island-Membrane Structure

A High-Dynamic and Ultra-Low Pressure Sensor with a Novel Be...

引用

IEEE International Conference on Nano/Micro Engineered and Molecular systems (NEMS)

作者： Yi Gao Juan Yang Wei Li Yushan Gao Libo Zhao Xiangguang Han Feng Han Mimi Huang Renjie Tan State Key Laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies School of Mechanical Engineering Xi’an Jiaotong University Xi’an China ChinaXi’an Satellite Control Center Xi’an China Xi’an Aerospace Propulsion Institute Xi’an China

ISBN: (数字)9798350359831

ISBN: (纸本)9798350359848

This paper presents a high-performance ultralow pressure sensor with a novel piezoresistive beam-islandmembrane structure to enhance the sensor’s sensitivity and the natural frequency. The structure comprises a membrane, a beam, and several groups of islands. The sensor’s sensitivity is efficiently increased by hollowing out the beam structure. Meanwhile, the islands are hollow to improve the dynamic performance. The sensor chip size is only 3 mm×3 mm×0.47 mm with a pressure range of 600 Pa, the sensitivity of 0.232 mV/Pa, and the natural frequency of 19.96 kHz. Compared with other reported ultra-low pressure sensors, the sensitivity and dynamic performance have been greatly improved. The proposed sensor provides an excellent candidate for lowpressure measurement fields, such as surgery diagnostic systems, space shuttle high-precision flight controls, and so on.

关键词： Pressure sensors Sensitivity Surgery Space shuttles Aerodynamics Frequency measurement Pressure measurement

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：