检索结果-内蒙古大学图书馆

arXiv 2024年

作者： Wang, Xin Kuang, Yucheng Wang, Chaojun Di, Hongyuan He, Boshu School of Information and Communication Engineering Key Laboratory of Modern Measurement & Control Technology Ministry of Education Beijing Information Science and Technology University Beijing102206 China Beijing100176 China Institute of Combustion and Thermal Systems School of Mechanical Electronic and Control Engineering Beijing Jiaotong University Beijing100044 China

While neural networks have been successfully applied to the full-spectrum k-distribution (FSCK) method at a large range of thermodynamics with k-values predicted by a trained multilayer perceptron (MLP) model, the required a-values still need to be calculated on-the-fly, which theoretically degrades the FSCK method and may lead to errors. On the other hand, too complicated structure of the current MLP model inevitably slows down the calculation efficiency. Therefore, to compensate among accuracy, efficiency and storage, the simple MLP designed based on the nature of FSCK method are developed, i.e., the simple FSCK MLP (SFM) model, from which those correlated k-values and corresponding ka-values can be efficiently obtained. Several test cases have been carried out to compare the developed SFM model and other FSCK tools including look-up tables and traditional FSCK MLP (TFM) model. Results show that the SFM model can achieve excellent accuracy that is even better than look-up tables at a tiny computational cost that is far less than that of TFM model. Considering accuracy, efficiency and portability, the SFM model is not only an excellent tool for the prediction of spectral properties, but also provides a method to reduce the errors due to nonlinear effects. Copyright © 2024, The Authors. All rights reserved.

关键词： Multilayer neural networks

来源：评论

学校读者我要写书评

暂无评论

Modeling of Photovoltaic modules under shading condition and an error evaluation criterion 4

Modeling of Photovoltaic modules under shading condition and...

引用

2022 4th International Conference on Energy systems and Electrical Power, ICESEP 2022

作者： Lai, GuangZhi Wang, Dong Li, HaoRan Zhao, Yi Ni, WeiChen Wen, JiaHao State Grid e-commerce Co. Ltd Beijing100053 China State Grid Tianjin Electric Power Company Tianjin300392 China Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education School of Automation Southeast University Nanjing210096 China

Energy is the focus of recent years. As one of the most representative new energy sources, solar energy has the characteristics of large reserves and no pollution. The main way to use solar energy is photovoltaic (PV) power generation, and the PV module in the PV power generation system is the component that converts solar energy into electric energy. In the actual power generation process, PV modules often receive uneven solar illumination due to the shadow caused by clouds, trees, buildings, etc., resulting in changes in the output characteristics of PV modules and reduced output efficiency. Therefore, modeling of PV modules under shading condition is very important. This paper presents two simple methods for solving the parameters of PV module models, which require few parameters and are easy to obtain. A modeling method of PV modules under shading condition is also presented. And then the modeling method is verified with the experiment result. Finally, an error criterion for PV module modeling under shading condition is proposed to measure the goodness of the modeling. Combining with the two parameter solving methods, the errors of this PV module modeling method under shading condition of the error criterion proposed in this paper are 3.24% and 2.51%, respectively, which meet the requirements for engineering use. © 2022 Institute of Physics Publishing. All rights reserved.

关键词： Solar energy

来源：评论

学校读者我要写书评

暂无评论

基于自解耦三明治结构的横向运动栅场效应晶体管MEMS微力传感器

引用

engineering 2023年第2期21卷 61-74,M0004页

作者：高文迪乔智霞韩香广王小章 Adnan Shakoor 刘存朗卢德江杨萍赵立波王永录王久洪蒋庄德孙东 State Key Laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement TechnologiesOverseas Expertise Introduction Center for Micro/Nano Manufacturing and Nano Measurement Technologies Discipline InnovationXi’an Jiaotong University(Yantai)Research Institute for Intelligent Sensing Technology and SystemSchool of Mechanical EngineeringXi’an Jiaotong UniversityXi’an 710049China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai 265503China Beijing Advanced Innovation Center for Intelligent Robots and Systems Beijing Institute of TechnologyBeijing 100081China State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150006China Eleventh Research Institute Sixth Academy of China Aerospace Science and Technology Co.Xi’an 710100China Department of Control and Instrumentation Engineering King Fahd University of Petroleum and MineralsDhahran 31261Saudi Arabia Department of Biomedical Engineering City University of Hong KongHong Kong 999077China

本文介绍了一种基于横向可移动栅极场效应晶体管(LMGFET)的新型微型力传感器的开发。提出了一种精确的电气模型,用于小型LMGFET器件的性能评估,与以前的模型相比,其精度有所提高。采用了一种新型三明治结构,该结构由一个金交叉解耦栅阵... 详细信息

本文介绍了一种基于横向可移动栅极场效应晶体管(LMGFET)的新型微型力传感器的开发。提出了一种精确的电气模型,用于小型LMGFET器件的性能评估,与以前的模型相比,其精度有所提高。采用了一种新型三明治结构,该结构由一个金交叉解耦栅阵列层和两个软光阻层SU-8组成。通过所提出的双差分传感结构,LMGFET横向工作在垂直干扰下的输出电流被大大消除,所提出传感器的相对输出误差从4.53%(传统差分结构)降低到0.01%。提出了一种实用的传感器制造工艺,并对其进行了模拟。基于LMGFET的力传感器的灵敏度为4.65μA·nN^(-1),可与垂直可移动栅极场效应晶体管(VMGFET)器件相媲美,但非线性度提高了0.78%,测量范围扩大了±5.10μN。这些分析为LMGFET器件的电气和结构参数提供了全面的设计优化,并证明了所提出的传感器在生物医学显微操作应用中具有良好的力传感潜力。

关键词：力传感器场效应晶体管横向运动三明治结构电气模型显微操作非线性度双差分

来源：评论

学校读者我要写书评

暂无评论

Reliability Study of Leo Satellite Networks Based on Random Linear Network Coding

Reliability Study of Leo Satellite Networks Based on Random ...

引用

Acoustics, Speech, and Signal Processing Workshops (ICASSPW), IEEE International Conference on

作者： Jiahui Wang Zan Xu Ruxin Zhi Liming Wang School of Electronics and Communication Engineering Beijing Information Science and Technology University China Key Laboratory of Information and Communication Systems Ministry of Information Industry Beijing Information Science and Technology University China Key Laboratory of Modern Measurement and Control Technology Ministry of Education Beijing Information Science and Technology University China

ISBN: (数字)9798350374513

ISBN: (纸本)9798350374520

This paper proposes a random linear network coding method tailored for data transmission within Low Earth Orbit (LEO) constellation networks to address the challenges of long delay and high bit error rates (BER) in LEO satellite networks. The method employs a link quality-aware strategy, enabling dynamic adjustment of source-side redundancy based on the corresponding link quality to maximize network fault tolerance with minimal overhead. Validation using the OMNET++ discrete event simulation platform indicates that the proposed method performs well in LEO satellite networks of various scales and configurations, exhibiting superior performance in more extensive networks. In particular, in the 300-LEO and 200-LEO scenarios, the proposed method demonstrates a successful delivery rate improvement of 19.6% and 18.73%, respectively, compared to traditional single-path approaches. This method is deemed more suitable for application in dynamic satellite networks with large hop counts.

关键词： Satellite constellations Satellites Bit error rate Fault tolerant systems Low earth orbit satellites Termination of employment Network coding

来源：评论

学校读者我要写书评

暂无评论

E-Nose-Based Cross-Domain Recognition of Combustion-Supporting Agents via M-BFFNet

E-Nose-Based Cross-Domain Recognition of Combustion-Supporti...

引用

Chinese control Conference (CCC)

作者： De-Xiu Wang Qing-Hao Meng Rui-Xue Han Hong-Yue Li Hui-Rang Hou Tianjin Key Laboratory of Process Measurement and Control Institute of Robotics and Autonomous Systems School of Electrical and Information Engineering Tianjin University Tianjin China Tianjin Navigation Instruments Research Institute Tianjin China

Identification of the type of combustion-supporting agents (CSAs) by an electronic nose (e-nose) is severely limited due to the absence of untested gas concentration in the e-nose training set. In order to solve this problem, this study designs an e-nose for classifying four CSAs (Diesel, Gasoline, Ethanol and Thinner), and builds cross-concentrations data set. This study uses Gramian Angular Field method that converts one-dimensional time series data to two-dimensional data, and proposes an algorithm named the Multi-Branch Feature Fusion Network (M-BFFNet). This algorithm passes the one-dimensional and two-dimensional data through two different networks and obtains two types of features. First, the algorithm can strength the one-dimensional raw data, integrate the advantages of different networks, and fuse the characteristics of different networks. Second, it can learn the characteristics of volatile gas with specific concentrations to identify the unknown concentrations. Last, a feature fusion module is designed to improve the algorithm ability of learning odor fingerprint. In order to verify the superiority of the algorithm, this study tests the recognition performance of the e-nose based systems and compares the proposed M-BFFNet with traditional algorithms. The results show that the proposed M-BFFNet improves the identification accuracy compared to other algorithms. According to the analysis of this work, the M-BFFNet can be used to identify CSAs with unknown concentrations.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Robot Coordinate measurement System Based on Pull Wire Sensor and Its Parameter Identification Method 12

A Robot Coordinate Measurement System Based on Pull Wire Sen...

引用

12th International Conference on CYBER Technology in Automation, control, and Intelligent systems, CYBER 2022

作者： Gao, Shuang Ma, Kaiwei Gao, Yang Shen, Xin Yang, Mingxing Xu, Fengyu College of Automation and College of Artificial Intelligence Nanjing University of Posts and Telecommunications Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Southeast University Jiangsu Nanjing China Anhui Province Key Laboratory of Special Heavy Load Robot Anhui Maanshan China College of Automation and College of Artificial Intelligence Nanjing University of Posts and Telecommunications Jiangsu Nanjing China

ISBN: (数字)9781665472678

ISBN: (纸本)9781665472678

Aiming at the problems of large robot error and difficult coordinate detection, a robot coordinate measurement system and parameter identification method based on pull wire sensor are proposed. Firstly, a robot coordinate measurement system based on pull wire sensor is established. Secondly, Levenberg-Marquarelt algorithm is used to solve the kinematics parameters of the robot. Finally, the neural network of the whole connection layer is used to predict the optimal compensation amount for secondary compensation. In order to verify the above theory, the robot coordinate measurement system is built and verified on the five degree of freedom robot experimental platform. The results show that the robot coordinate measurement system can measure the robot coordinates quickly and accurately. The secondary compensation method controls the accuracy of the robot to about 2mm, and the optimal error is controlled within 0.012mm. The absolute positioning accuracy of the robot is effectively improved. © 2022 IEEE.

关键词： Robots

来源：评论

学校读者我要写书评

暂无评论

Double STAR-RIS Enhanced Secure Wireless Communications

引用

IEEE Transactions on Wireless Communications 2025年

作者： Cai, Yujin Yu, Wenwu Nie, Xiaokai Cheng, Qiang Cui, Tiejun Southeast University School of Mathematics Jiangsu Nanjing211189 China Purple Mountain Laboratories Nanjing211111 China Southeast University School of Automation Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Nanjing210096 China Southeast University Shenzhen Research Institute Shenzhen518057 China Southeast University State Key Laboratory of Millimeter Waves Nanjing210096 China

Simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RISs) have recently been employed to enhance the secure transmission due to the ability to manipulate the full-space electromagnetic signals. Prior works mainly investigate the single STAR-RIS aided secure communication system, which does not reveal the potential of the cooperative inter-STAR-RIS link. In this paper, a double STAR-RIS enhanced secure communication network involving multiple legitimate users (LUs) and eavesdroppers (Eves) is proposed. For fairness, the minimum secrecy rate maximization problem is formulated by jointly optimizing the active beamforming and passive transmission and reflection (T&R) beamforming. To deal with the highly non-convex nonlinear optimization problem, an active and passive beamforming optimization algorithm is proposed by employing the alternating optimization method. Wherein, a low-complexity sequential constraint relaxation (SCR) based algorithm is designed to solve the passive T&R beamforming optimization problem. Simulation results demonstrate that the secure performance in the double STAR-RIS assisted system outperforms that in the single RIS/double RIS/single STAR-RIS aided network. Furthermore, the proposed algorithm significantly reduces computational time (i.e., resource allocation time) compared with the traditional SCR based beamforming optimization algorithm. © 2002-2012 IEEE.

关键词： Cooperative communication

来源：评论

学校读者我要写书评

暂无评论

A nested constraints based anti-disturbance collision-free formation control scheme for multi-mobile robot systems

A nested constraints based anti-disturbance collision-free f...

引用

Chinese Automation Congress (CAC)

作者： Guodong Wang Xiangyu Wang Shihua Li Dan Niu School of Automation Southeast University Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Nanjing People’s Republic of China

This paper investigates distributed formation control of multi-mobile robot systems with collision avoidance. A novel nested constraints based anti-disturbance formation control scheme is established, which contains two parts. In the first part, a formation signal generator is constructed on the communication network by using proper distributed cooperative control approaches and artificial potential field-based methods, such that it "completes" the desired formation control task in its outputs. In the second part, by combining proper disturbance estimations, some nonlinear tracking controllers are designed for the robots to track the corresponding outputs of the generator asymptotically. A "nested constraint mechanism" is put forward accordingly and applied to limit the generator’s outputs and the robots’ tracking errors. In this way, the studied multi-mobile robot systems realize the formation control goal with collision avoidance. Compared with existing results, the proposed method has a better plug-and-play feature to deal with the tight encapsulations of the practical robot products, and has better convergence performances with the existence of disturbances. Some experiments are given to validate the effects of the proposed methods.

关键词： Feedback loop Estimation Signal generators Formation control Generators Real-time systems Trajectory

来源：评论

学校读者我要写书评

暂无评论

SAD-TIME: a Spatiotemporal-fused network for depression detection with Automated multi-scale Depth-wise and TIME-interval-related common feature extractor

arXiv

引用

arXiv 2024年

作者： Wang, Han-Guang Hou, Hui-Rang Jin, Li-Cheng Xu, Chen-Yang Zhang, Zhong-Yi Meng, Qing-Hao Zhang, Yong-Hui Tianjin Key Laboratory of Process Measurement and Control Institute of Robotics and Autonomous Systems School of Electrical and Information Engineering Tianjin University Tianjin300072 China Department of Psychiatry Tianjin Anding Hospital Mental Health Center Tianjin Medical University China

Background and Objective: Depression is a severe mental disorder, and accurate diagnosis is pivotal to the cure and rehabilitation of people with depression. However, the current questionnaire-based diagnostic methods could bring subjective biases and may be denied by subjects. In search of a more objective means of diagnosis, researchers have begun to experiment with deep learning-based methods for identifying depressive disorders in recent years. Methods: In this study, a novel Spatiotemporal-fused network with Automated multi-scale Depth-wise and TIME-interval-related common feature extractor (SAD-TIME) is proposed. SAD-TIME incorporates an automated nodes’ common features extractor (CFE), a spatial sector (SpS), a modified temporal sector (TeS), and a domain adversarial learner (DAL). The CFE includes a multiscale depth-wise 1D-convolutional neural network and a time-interval embedding generator, where the unique information of each channel is preserved. The SpS fuses the functional connectivity with the distance-based connectivity containing spatial position of EEG electrodes. A multi-head-attention graph convolutional network is also applied in the SpS to fuse the features from different EEG channels. The TeS is based on long short-term memory and graph transformer networks, where the temporal information of different time-windows is fused. Moreover, the DAL is used after the SpS to obtain the domain-invariant feature. Results: Experimental results under tenfold cross-validation show that the proposed SAD-TIME method achieves 92.00% and 94.00% depression classification accuracies on two datasets, respectively, in cross-subject mode. Conclusion: SAD-TIME is a robust depression detection model, where the automatedly-generated features, the SpS and the TeS assist the classification performance with the fusion of the innate spatiotemporal information in the EEG signals. Copyright © 2024, The Authors. All rights reserved.

关键词： Convolutional neural networks

来源：评论

学校读者我要写书评

暂无评论

Distributed Estimation of Sensor Networks Based on LSTM-Kalman Filter*

Distributed Estimation of Sensor Networks Based on LSTM-Kalm...

引用

International Conference on control, Automation, Robotics and Vision (ICARCV)

作者： Si-peng Kuang Ya Zhang Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education School of Automation Southeast University Nanjing P.R. China

ISBN: (纸本)9781665476881

This paper studies the distributed estimation problem of sensor networks where the noise parameters are unknown and some sensors cannot obtain the measurements. The expectation maximization (EM) algorithm integrating Kalman filtering algorithm, which is called the EM-KF algorithm, is adopted to sensor networks. Simulation examples are given to illustrate the effectiveness of the algorithm. By using LSTM network, and LSTM-KF algorithm is further proposed to improve the accuracy of EM-KF algorithm.

关键词： Automation Estimation Process control Filtering algorithms Robot sensing systems Noise measurement Kalman filters

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：