检索结果-内蒙古大学图书馆

42nd Chinese control Conference, CCC 2023

作者： Chen, Dejin Yu, Ke Ding, Shihong Wang, Xiangyu Li, Shihua School of Automation Southeast University Nanjing210096 China Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education Nanjing210096 China School of Electrical and Information Engineering Zhenjiang212013 China

ISBN: (纸本)9789887581543

To enhance the estimation accuracy and dynamic performance of sensorless surface-mounted permanent magnet synchronous motor (SPMSM) drives, a sensorless control scheme based on generalized super-twisting observer (GSTO) and non-smooth controller is proposed. Firstly, a GSTO for back electromotive force (back-EMF) estimation is proposed. Compared with the conventional super-twisting observer, the GSTO has a faster convergence rate and stronger robustness due to the additional terms. Then a linear extended state observer (LESO) is adopted to estimate the position, speed, and lumped disturbance at the same time. Moreover, a non-smooth composite speed controller is designed by combining the disturbance feed-forward compensation. Compared with the conventional PI speed controller, the non-smooth controller has a shorter settling time and a better disturbance rejection ability. Finally, the effectiveness of the proposed method is verified by simulation results. © 2023 Technical Committee on control Theory, Chinese Association of Automation.

关键词： controllers

来源：评论

学校读者我要写书评

暂无评论

An Improved Machine Learning Model for Pure Component Property Estimation

引用

engineering 2024年第8期39卷 61-73页

作者： Xinyu Cao Ming Gong Anjan Tula Xi Chen Rafiqul Gani Venkat Venkatasubramanian State Key Laboratory of Industrial Control Technology College of Control Science and EngineeringZhejiang UniversityHangzhou 310027China Department of Physics Bard College at Simon’s RockGreat BarringtonMA 01230USA PSE for SPEED Company Charlottenlund DK-2920Denmark Sustainable Energy and Environment Thrust The Hong Kong University of Science and Technology(Guangzhou)Guangzhou 510000China Department of Applied Sustainability Széchenyi István UniversityGyör 9026Hungary Complex Resilient Intelligent Systems Laboratory Department of Chemical EngineeringColumbia UniversityNew YorkNJ 10027USA

Information on the physicochemical properties of chemical species is an important prerequisite when performing tasks such as process design and product ***,the lack of extensive data and high experimental costs hinder the development of prediction techniques for these ***,accuracy and predictive capabilities still limit the scope and applicability of most property estimation *** paper proposes a new Gaussian process-based modeling framework that aims to manage a discrete and high-dimensional input space related to molecular structure representation with the group-contribution approach.A warping function is used to map discrete input into a continuous domain in order to adjust the correlation between different *** selection techniques,including prior elicitation and prior predictive checking,are also applied during the building procedure to provide the model with more information from previous research *** framework is assessed using datasets of varying sizes for 20 pure component *** 18 out of the 20 pure component properties,the new models are found to give improved accuracy and predictive power in comparison with other published models,with and without machine learning.

关键词： Group contribution Gaussian process Warping function Prior predictive checking

来源：评论

学校读者我要写书评

暂无评论

Multi-Blockchain Based Data Trading Markets With Novel Pricing Mechanisms

引用

IEEE/CAA Journal of Automatica Sinica 2023年第12期10卷 2222-2232页

作者： Juanjuan Li Junqing Li Xiao Wang Rui Qin Yong Yuan Fei-Yue Wang IEEE the State Key Laboratory of Multimodal Artificial Intelligence Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China the College of Computer Science and Engineering Shandong University of Science and TechnologyQingdao 266590China the School of Artificial Intelligence Anhui UniversityHefei 266114 the Qingdao Academy of Intelligent Industries Qingdao 230031China the School of Mathematics Renmin University of ChinaBeijing 100872China the State Key Laboratory for Management and Control of Complex Systems Chinese Academy of SciencesBeijing 100190 the Faculty of Innovation Engineering Macao University of Science and TechnologyMacao 999078China

In the era of big data,there is an urgent need to establish data trading markets for effectively releasing the tremendous value of the drastically explosive *** security and data pricing,however,are still widely regarded as major challenges in this respect,which motivate this research on the novel multi-blockchain based framework for data trading markets and their associated pricing *** this context,data recording and trading are conducted separately within two separate blockchains:the data blockchain(DChain) and the value blockchain(VChain).This enables the establishment of two-layer data trading markets to manage initial data trading in the primary market and subsequent data resales in the secondary ***,pricing mechanisms are then proposed to protect these markets against strategic trading behaviors and balance the payoffs of both suppliers and ***,in regular data trading on VChain-S2D,two auction models are employed according to the demand scale,for dealing with users’ strategic *** incentive-compatible Vickrey-Clarke-Groves(VCG)model is deployed to the low-demand trading scenario,while the nearly incentive-compatible monopolistic price(MP) model is utilized for the high-demand trading *** temporary data trading on VChain-D2S,a reverse auction mechanism namely two-stage obscure selection(TSOS) is designed to regulate both suppliers’ quoting and users’ valuation ***,experiments are carried out to demonstrate the strength of this research in enhancing data security and trading efficiency.

关键词： Auction data trading markets multi-blockchain pricing mechanisms

来源：评论

学校读者我要写书评

暂无评论

Towards Intelligent and Trustworthy Crowdsourcing systems with Cyber-physical Social Intelligence via Retrieval-augmented Generation

Towards Intelligent and Trustworthy Crowdsourcing Systems wi...

引用

2024 International Conference on Cyber-Physical Social Intelligence, ICCSI 2024

作者： Yang, Jing Wang, Xingxia Ni, Qinghua Liu, Yuhang Wang, Jing Wang, Fei-Yue Chinese Academy of Sciences State Key Laboratory of Multimodal Artificial Intelligence Systems Institute of Automation Beijing100190 China Macau University of Science and Technology Faculty of Innovation Engineering 999078 China Macau University of Science and Technology 999078 China Chinese Academy of Sciences State Key Laboratory for Management and Control of Complex Systems Beijing100190 China

ISBN: (纸本)9798350376739

In recent years, crowdsourcing systems that tackle complex tasks through the collective efforts of many individuals have garnered substantial attention. However, the existing crowd-sourcing systems face some challenges such as overreliance on human experience and effort, information overload, and risks of privacy breaches. To overcome these challenges, this paper proposes an intelligent and trustworthy crowdsourcing frame-work based on blockchain and retrieval-augmented generation. The framework centers around foundational models to integrate the three distinct and sequentially interdependent phases: task decomposition, task allocation or recommendation, and task execution, enabling the automatic provision of a personalized, comfortable, and efficient user experience. Blockchain and smart contracts are utilized to protect user privacy and interests without leaning on any third trusted authority. Additionally, the operational process of the framework is explained and validated by taking printed circuit board design and manufacturing as a case study and ChatGPT as its generator. © 2024 IEEE.

关键词： Embedded systems

来源：评论

学校读者我要写书评

暂无评论

Integrated Inspection of QoM, QoP, and QoS for AOI Industries in Metaverses

引用

IEEE/CAA Journal of Automatica Sinica 2022年第12期9卷 2071-2078页

作者： Yutong Wang Yonglin Tian Jiangong Wang Yansong Cao Shixing Li Bin Tian IEEE The State Key Laboratory for Management and Control of Complex Systems Chinese Academy of SciencesBeijing 100190China Department of Engineering Science Faculty of Innovation EngineeringMacao University of Science and TechnologyMacao 999078China North Automatic Control Technology Institute in Taiyuan ShanxiChina Qingdao Academy of Intelligent Industries Shandong 266109China

With the rapid development of information technologies such as digital twin, extended reality, and blockchain,the hype around "metaverse" is increasing at astronomical speed. However, much attention has been paid to its entertainment and social functions. Considering the openness and interoperability of metaverses, the market of quality inspection promises explosive growth. In this paper, taking advantage of metaverses, we first propose the concept of Automated Quality Inspection(Auto QI), which performs integrated inspection covering the entire manufacturing process, including Quality of Materials, Quality of Manufacturing(Qo M), Quality of Products, Quality of Processes(Qo P), Quality of systems, and Quality of Services(Qo S). Based on the scenarios engineering theory, we discuss how to perform interactions between metaverses and the physical world for virtual design instruction and physical validation feedback. Then we introduce a bottomup inspection device development workflow with productivity tools offered by metaverses, making development more effective and efficient than ever. As the core of quality inspection,we propose Quality Transformers to complete detection task,while federated learning is integrated to regulate data *** summary, we point out the development directions of quality inspection under metaverse tide.

关键词： Automated Optical Inspection Metaverses Quality Inspection Transformers

来源：评论

学校读者我要写书评

暂无评论

Manual Alignment of Dual End-Effectors for Piezo-Driven Microhand

Manual Alignment of Dual End-Effectors for Piezo-Driven Micr...

引用

2024 IEEE International Conference on Real-Time Computing and Robotics, RCAR 2024

作者： Pang, Jichao Liu, Dan Tang, Xiaoqing Chen, Yan Huang, Qiang Arai, Tatsuo Liu, Xiaoming Key Laboratory of Biomimetc Robots and Systems Ministry of Education State Key Laboratory of Intelligent Control and Decision of Complex System Beijing Advanced Innovation Center for Intelligent Robots and Systems School of Mechatronical Engineerin Beijing Institute of Technology Beijing100081 China The University of Electro-Communications Center for Neuroscience and Biomedical Engineering Tokyo182-8585 Japan

ISBN: (纸本)9798350372601

In recent years, micromanipulator with dual end-effectors called microhand has been widely used in industrial and biological fields. Whether the tip positions of the two end-effectors of the microhand can be accurately aligned seriously affects the precise grasping of the microhand. However, few researchers have presented practical ways for precisely aligning the tip positions of a 6-DOF microhand's two end- effectors. This paper proposes a novel, inexpensive, lightweight, robust, and easy-to-use microhand dual end-effectors clamping device that can precisely and quickly align the two end-effectors of a 6-DOF microhand. First, we describe the microhand dual end-effectors clamping device's lightweight structural design. After that, we simplify the microhand dual end-effectors clamping device model and create a mathematical model to determine the relationship between the end-effectors' tip position and the rotation angles of screw No.1, screw No.2, screw No.3 of the microhand dual end-effectors clamping device. Through experimentation, we are able to attain precise alignment of the two end-effectors tip positions of the 6-DOF microhand, so we confirm that our mathematical model is true. Finally, we use the impulse response of PZT in the microhand's lower module to confirm the stability of the microhand dual end- effectors clamping device. We believe that the proposed the microhand dual end-effectors clamping device has great potential in industrial and biological applications as a universal tool for precise alignment of the tip positions of the two end-effectors of a 6-DOF microhand. © 2024 IEEE.

关键词： Clamping devices

来源：评论

学校读者我要写书评

暂无评论

Surface deformation-dependent mechanical properties of bending nanowires:an ab initio core-shell model

引用

Applied Mathematics and Mechanics(English Edition) 2022年第2期43卷 219-232页

作者： Ye XIAO J.SHANG L.Z.KOU Chun LI School of Mechanics Civil Engineering and ArchitectureNorthwestern Polytechnical UniversityXi’an710072China MIIT Key Laboratory of Dynamics and Control of Complex Systems Northwestern Polytechnical UniversityXi’an710072China School of Mechanical Medical and Process EngineeringQueensland University of TechnologyBrisbaneQLD4000Australia

An ab initio core-shell model is proposed to evaluate the surface effect in bending nanowires,in which the elastic modulus depends on the surface relaxation and deformation induced by external *** using first-principles calculations based on the density functional theory(DFT),the surface and bulk properties are calculated for Ag,Pb,and Si *** obtained theoretical predictions of the effective Young’s modulus of nanowires agree well with the experimental data,which shows that the fixed-fixed nanowire is stiffened and the cantilevered nanowire is softened as the characteristic size of the cross section ***,the contrastive analysis on the two kinds of nanowires demonstrates that increasing the nanowire aspect ratio would enhance the surface *** present results could be helpful for understanding the size effect in nanowires and designing nanobeam-based devices in nanoelectromechanical systems(NEMSs).

关键词： surface effect density functional theory(DFT) surface relaxation surface stress nanowire

来源：评论

学校读者我要写书评

暂无评论

A Novel Thermal Analysis Method for Tubular PM Linear Motors Based on Transfer Learning

引用

IEEE Transactions on Transportation Electrification 2025年第3期11卷 7379-7388页

作者： Wu, Tao Dai, Peipei Xue, Gang Guo, Youguang Lei, Gang Zhu, Jianguo Wang, Yifei China University of Geosciences School of Automation Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China University of Technology Sydney School of Electrical and Data Engineering UltimoNSW2007 Australia The University of Sydney School of Electrical and Computer Engineering SydneyNSW2006 Australia

Thermal modeling and analysis are critical for permanent magnet linear synchronous motors (PMLSMs), particularly in multiphysical analysis and motor design optimization. This article proposes a new method for thermal steady state modeling and analysis based on transfer learning (TL), which combines the thermal mechanism model with the data-driven model to achieve high-precision temperature analysis with small number of finite element analysis (FEA) samples. First, an equivalent thermal circuit (ETC) model is established for PMLSMs based on the structural parameters and heat transfer principles. Second, a hybrid model based on TL is developed: the model is pretrained by a large sample set generated from the ETC in the source field (mechanism analytical model), and then, the trained model is transferred to the target field (FEA data-driven model). The parameters of the neural network in the target field are optimized by a few FEA sample sets with higher precision to improve the prediction accuracy of the target model. Experimental results demonstrate that the proposed method significantly boosts the performance of the deep neural network (DNN) model, particularly when training sets are small. The root mean square error (RMSE) of the DNN model decreases by 0.901 in the 5:5 (training/testing) dataset and 1.726 in the 2:8 dataset;and the corresponding R^{2} and maximal absolute error of motor performances are significantly decreased. The smaller the proportion of the training set, the better performance of the hybrid modeling will achieve. Furthermore, a temperature rise experiment conducted on a prototype motor validates the efficacy and precision of the proposed hybrid modeling methodology. © 2015 IEEE.

关键词： Permanent magnets

来源：评论

学校读者我要写书评

暂无评论

Sustainable Mining in the Era of Artificial Intelligence

引用

IEEE/CAA Journal of Automatica Sinica 2024年第1期11卷 1-4页

作者： Long Chen Yuting Xie Yutong Wang Shirong Ge Fei-Yue Wang IEEE the State Key Laboratory for Management and Control of Complex Systems at the Institute of Automation Chinese Academy of SciencesBeijing 100190China the National Laboratory of Pattern Recognition at the Institute of Automation and Waytous Ltd.China the School of Computer Science and Engineering Sun Yat-Sen UniversityGuangzhou 510275GuangdongChina the School of Mechanical Electronic and Information Engineering China University of Mining and Technology BeijingBejing 100083China the School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100190China

The mining sector historically drove the global economy but at the expense of severe environmental and health repercussions,posing sustainability challenges[1]-[3].Recent advancements on artificial intelligence(AI)are revolutionizing mining through robotic and data-driven innovations[4]-[7].While AI offers mining industry advantages,it is crucial to acknowledge the potential risks associated with its widespread ***-reliance on AI may lead to a loss of human control over mining operations in the future,resulting in unpredictable consequences.

关键词： Sustainable mining consequences

来源：评论

学校读者我要写书评

暂无评论

Research on Vibration Suppression for Industrial Robots Based on Dynamic Feedforward control

Research on Vibration Suppression for Industrial Robots Base...

引用

第43届中国控制会议

作者： Bin Huang Yahui Gan Fang Fang Bo Zhou Xianzhong Dai School of Automation Southeast University Key Laboratory of Measurement and Control of Complex Systems of Engineering Ministry of Education

ISBN: (数字)9789887581581

ISBN: (纸本)9798350366907

To address the challenges of low position tracking accuracy and high vibrations in mechanical arms controlled by PID closed-loop systems, this paper introduces a torque feedforward control scheme based on dynamic models. The paper initially analyzes the causes of vibrations during robot motion, establishing a mathematical model to quantify the trajectory accuracy and repeatability of vibrations. Subsequently, a torque feedforward control scheme based on dynamic models is designed, and its feasibility is theoretically analyzed. In this motion control scheme, precise dynamic models are utilized to calculate and output the desired torque. The torque values are then converted into motor current values, which are superimposed on the control output of the current loop in the servo to achieve real-time torque compensation. Finally, through simulation experiments, the paper validates that the dynamics-based torque feedforward control effectively suppresses robot vibrations, enhances tracking accuracy,and improves dynamic performance. The findings demonstrate the efficacy of the proposed control strategy in addressing the challenges associated with PID-controlled robotic arm systems.

关键词： Industrial robots feedforward control vibration suppression

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：