检索结果-内蒙古大学图书馆

arXiv 2022年

作者： Wang, Limeng Yang, Chao Zhang, Yi Bu, Fanjin Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin132012 China State Grid Harbin Power Supply Company Substation Secondary Maintenance Center Harbin150036 China

As an important supporting facility for electric vehicles, the reasonable planning and layout of charging stations are of great significance to the development of electric vehicles. However, the planning and layout of charging stations is affected by various complex factors such as policy economy, charging demand, user charging comfort, and road traffic conditions. How to weigh various factors to construct a reasonable model of charging station location and capacity has become a major difficulty in the field of electric vehicle charging facility planning. Firstly, this paper constructs the location and capacity optimization model of the charging station with the goal of maximizing the revenue of operators and minimizing the user's charging additional cost. At the same time, the road time-consuming index is introduced to quantify the impact of road congestion on the user's charging additional cost, so as to effectively improve the user's satisfaction during charging. Then, aiming at the charging station planning model, a non-dominated sorting genetic algorithm with an elite strategy (NSGA-Ⅱ) based on chaos initialization and arithmetic crossover operator is proposed. Finally, taking the Haidian District of Beijing as the simulation object, the results show that compared with the situation of urban traffic networks not considered, the model proposed in this paper significantly reduces the cost of lost time of users by 11.4% and the total additional cost of users' charging by 7.6%. It not only ensures the economy of the system, but also effectively improves the charging satisfaction of users, which further verifies the feasibility and effectiveness of the model, and can provide a reference for the planning and layout of charging stations in the future. © 2022, CC BY-NC-ND.

关键词： Location

来源：评论

学校读者我要写书评

暂无评论

Optimal Scheduling Strategy for Interconnected Multi-region Peaking Resources Considering Network Currents

Optimal Scheduling Strategy for Interconnected Multi-region ...

引用

power and Electrical Engineering (ACPEE), 5th Asia Conference on

作者： Junhui Li Yahui Pan Xuesong Qi Xiaozhuo Guan Tiebin Guo Yizhu Zhang Jia Sun Yixin Lu Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Northeast Electric Power University Jilin China Power dispatching and control center Jilin Power Supply Company Jilin China Science and Technology Section Jilin Power Supply Company Jilin China Science and Technology Innovation Department Jilin Electric Power Co Changchun China

ISBN: (数字)9798350309638

ISBN: (纸本)9798350309645

Under the background of the increasing proportion of new energy power generation, the mismatch of “source-load” occurs between regions. To effectively improve the utilization rate of peaking resources and increase the amount of “source-load” matching, this paper proposes the optimal scheduling of multiregional peaking resources considering network currents. The strategy takes into account the impact of wind power penetration rate on the demand for peaking resources and connects the regions with different peaking characteristics using contact lines. It evaluates and iterates the peaking resources of each region in each time period and finds the optimal amount of peaking resources and the optimal output of thermal power units in each region. Through simulation, the results show that the proposed strategy effectively improves wind power consumption and system operation economy.

关键词： Electrical engineering systems operation Asia Optimal scheduling Wind power generation

来源：评论

学校读者我要写书评

暂无评论

Multi-Objective Model Predictive control Strategy in Waked Wind Farms for Optimal Fatigue Loads

SSRN

引用

SSRN 2023年

作者： Zhong, Cheng Ding, Yicheng Wang, Husai Chen, Jikai Wang, Jian Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin Province Jilin132012 China Northeast Electric Power University College of Electrical Engineering Jilin Province Jilin132012 China

With the rapid growth of wind power penetration, wind farms (WFs) are required to implement frequency regulation that active power control to track a given power reference. Due to the wake interaction of the wind turbines (WTs), there is more than one solution to distributing power reference among the operating WTs, which can be exploited as an optimization problem for the second goal, such as fatigue load alleviation. In this paper, a multi-objective closed-loop model predictive controller is developed that minimizes the wind farm tracking errors, the dynamical fatigue load, and the load deviation from the mean value. The controller is evaluated in a medium-fidelity model. A 3*3 WTs simulation case study is used to demonstrate the control performance for different penalty factor settings. The results indicated the WF can alleviate dynamical fatigue load and have no significant impact on power tracking. However, it can bring excessive loads on the upstream WTs. By adding a trade-off between the load equalization and dynamical fatigue load, the load differences between WTs are significantly reduced and loads of the upstream WTs can be reduced, while the dynamical fatigue load slightly increases when selecting a proper penalty factor. © 2023, The Authors. All rights reserved.

关键词： Fatigue load

来源：评论

学校读者我要写书评

暂无评论

Generation method of anti-misoperation locking logic rules for substations based on typical wiring

Generation method of anti-misoperation locking logic rules f...

引用

IEEE Conference on energy Internet and energy system Integration (EI2)

作者： Jingxiang Zhang Hui Zou Hewei Hou Junhui Li Rongrong Ji Kaiyuan Duan Cuiping Li Xingxu Zhu Extra-High Voltage Branch Company of State Grid Zhejiang Electric Power Co. Ltd Hangzhou China Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin China

ISBN: (数字)9798331523527

ISBN: (纸本)9798331523534

At present, substations usually use electrical blocking facilities to achieve the function of anti-fault blocking, but new stations and new reconstruction and expansion stations have the problem of low efficiency in the compilation and review of anti-fault blocking logic rules, and also need a lot of manual debugging and checking time. In this paper, based on the typical substation wiring and anti-false blocking logic rules, the typical substation wiring library and the corresponding blocking logic library are constructed; then, the graphic editing module and graphic analysis module are constructed by combining the substation modelling method with the topology and other technologies. Finally, the automatic generation of anti-error latching logic rules is realised, which solves the problems of low efficiency and lack of reliability in the writing and checking of the corresponding substation anti-misoperation locking logic rules.

关键词： Wiring Graphics Substations Reviews Debugging system integration Libraries Topology Logic Reliability

来源：评论

学校读者我要写书评

暂无评论

Learning-Based Model Predictive Secondary Frequency control of Pv-Ess-Ev Microgrid

SSRN

引用

SSRN 2024年

作者： Zhong, Cheng Zhao, Hailong Liu, Yudong Liu, Chuang Key Laboratory of Modern Power System Simulation and Control &Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin Province Jilin132012 China Northeast Electric Power University College of Electrical Engineering Jilin Province Jilin132012 China

Microgrids comprising photovoltaic (PV), energy-storage systems and electric vehicles have received increasing attention. However, the increase in renewable energy sources, such as PVs, will introduce uncertainty factors to the frequency response, resulting in frequency fluctuations that can reduce power quality. Hence, we propose an outstanding learning-based control approach that combines a model of physical principles with a Gaussian Process (GP) learning approach. The learning model corrects the physical principles model and estimates its uncertainty. simulations are performed by comparing the proposed controller with conventional model-predictive controllers. The results indicate that the learning-based controller proposed can adjust the frequency with less overshooting and a lower root mean square error compared to the conventional MPC control method. © 2024, The Authors. All rights reserved.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

An Optimal Scheduling Method for Shared energy Storage Based on Wind power Uncertainty

An Optimal Scheduling Method for Shared Energy Storage Based...

引用

power Science and technology (ICPST), IEEE International Conference on

作者： Baoju Li Zezhong Liu Jiyue Fu Junhui Li Xiaobiao Fu Xingxu Zhu Yao Wang Cuiping Li Power Dispatching and Control Center State Grid Jilin Electric Power Co. Ltd Chang Chun Ji Lin China Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education(Northeast Electric Power University) Ji Lin Ji Lin China

ISBN: (数字)9798350349030

ISBN: (纸本)9798350349047

In order to improve the utilization of energy storage, to explore the value of energy storage utilization, and to study the utilization of energy storage. In this paper, a shared energy storage optimization scheduling method based on wind power uncertainty is proposed. Firstly, the scenario generation method of Latin hypercubic sampling and Cholesky decomposition is used to quantify the wind power output, and the uncertainty output is converted into deterministic output; then the economic operation is taken as the optimal scheduling objective, and environmental benefits such as carbon capture and grid constraints are considered to carry out the optimized scheduling of shared energy storage; finally, the validity of the method is verified through the scheduling of the 6-node arithmetic example system, and the utilization of the energy storage is analyzed. Finally, the effectiveness of the method is verified by scheduling in a 6-node arithmetic system, and energy storage utilization is analyzed.

关键词： Uncertainty Thermal decomposition Optimal scheduling Wind power generation Hypercubes Thermal analysis Scenario generation

来源：评论

学校读者我要写书评

暂无评论

Zoning Voltage Coordination control Method for High Proportion Distributed Photovoltaic power in Distribution Network

Zoning Voltage Coordination Control Method for High Proporti...

引用

energy Engineering and power systems (EEPS), International Conference on

作者： Bing Xue Yanfeng Ge Chuang Li Niankang Guo Chenglian Ma Dawei Huang State Grid Yingkou Power Supply Company State Grid Liaoning Electric Power Co. LTD Yingkou Liaoning China Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education (Northeast Electric Power University) Jilin China

ISBN: (数字)9798350375138

ISBN: (纸本)9798350375145

The high penetration of distributed photovoltaic generation into distribution networks has become a major development trend in the future. However, the intermittency and random fluctuations of distributed photovoltaic output have exacerbated voltage violation and fluctuation issues in distribution networks. To address this problem, a distribution network zoning voltage coordination control strategy is proposed. In terms of zoning, voltage sensitivity index information obtained from daily power flow calculations is utilized to analyse and express the impact variation of photovoltaic generation on the voltage of each node. Based on the threshold requirements of voltage variation indices, the zoning of nodes is determined. In terms of zoning voltage coordination control, a strategy of voltage sensitivity control within the partition is adopted, pairing nodes within each partition and utilizing the active and reactive regulation capabilities of photovoltaic generation to control all over-limit voltage within normal range. Furthermore, through the interval distributed voltage coordination control strategy, the interval state variables are equivalenced, and based on the SADMM algorithm, the dynamic reactive power compensation amount between adjacent partitions is optimized to achieve the optimization and suppression of network-wide voltage fluctuations. Taking the IEEE 33-node system as an example, a case study was conducted to verify the effectiveness and feasibility of the proposed strategy in practical applications.

关键词： Photovoltaic systems Reactive power Fluctuations Voltage fluctuations Sensitivity Distribution networks Regulation Indexes Voltage control Optimization

来源：评论

学校读者我要写书评

暂无评论

Research on Partition Method of Distributed Photovoltaic Cluster Based on Modularity Index and Absorption Ability

Research on Partition Method of Distributed Photovoltaic Clu...

引用

Smart Grids and energy systems (SGES), International Conference on

作者： Tao Meng Xiangyu Lv Chenggang Li Dexin Li Yifu Zhang Xiangdong Meng Electric Power Research Institute State Grid Jilin Electric Power Co. Ltd. Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Ministry of Education School of Electrical Engineering Northeast Electric Power University Changchun Jilin China

To achieve large-scale renewable energy, grid friendly coordination and the need to maximize grid-connection and consumption functions, the clustering method has become a forward-looking solution for distribution network planning, construction and dispatching control. In this paper, the modularity index and active power balance index based on electrical distance are taken as the comprehensive classification index. Then genetic algorithm is introduced to divide the distributed PV cluster in the distribution network. Finally, a 10kV distribution system is taken as an example, and the distributed photovoltaic cluster planning is simulated and analyzed, which proves that the distributed photovoltaic cluster division method is effective.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Critical link identification of power system vulnerability based on modified graph attention network

arXiv

引用

arXiv 2024年

作者： Wang, Changgang Wang, Xianwei Cao, Yu Li, Yang Lü, Qi Zhang, Yaoxin Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin132012 China Northeast Electric Power University Jilin132012 China State Grid Tianjin Electric Power Company Tianjin300010 China

As the power grid expands and the proportion of renewable energy increases, the uncertainty and randomness of the power grid have increased, posing a threat to the security of system operation. It becomes crucial to identify the crucial links in the power grid to ensure its reliability during operation. Addressing the issues of slow identification speed and difficulty in meeting the actual operational requirements of traditional methods for identifying crucial links in the power grid, this paper proposes a method based on the Modified Graph Attention Network (MGAT) algorithm for identifying crucial link in the power grid. Firstly, combining complex network theory with actual power grid operational data, an evaluation index set is established. Subsequently, the MGAT is utilized to explore the mapping relationships between various indicators during power grid operation and the crucial links, forming a model for crucial link identification. Considering the requirements of training accuracy and efficiency, the original data is preprocessed to optimize the model. Next, through simulation, the original dataset is obtained for training, validation, and testing of the identification model. Finally, the proposed model is applied to an improved IEEE 30-node system and a real power grid. The results indicate the feasibility of the proposed method, with accuracy and speed surpassing traditional methods, demonstrating its practical engineering value. © 2024, CC BY-NC-ND.

关键词： Smart power grids

来源：评论

学校读者我要写书评

暂无评论

Ancillary service for frequency regulation based on multi-energy virtual power plant aggregating factory load

Ancillary service for frequency regulation based on multi-en...

引用

The 11th IET International Conference on Advances in power system control, Operation and Management (APSCOM 2018)

作者： Jiazhen Wang Xinwei Shen Yinliang Xu Qinglai Guo Hongbin Sun Yanbo Chen Shenzhen Environmental Science and New Energy Technology Engineering Laboratory Tsinghua-Berkeley Shenzhen Insitute Tsinghua University Shenzhen China State Key Lab of Control and Simulation of Power System and Generation Equipments Department of Electrical Engineering Tsinghua University Beijing China State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources North China Electric Power University

ISBN: (数字)9781839530043

With the increasing proportion of renewable energy generation into the power grid, more challenges are coming to the safe and stable operation of the power system. In order to keep the balance in energy market, system operator has to purchase much service in ancillary service market to guarantee the stable operation of the power transmission. Virtual power plant (VPP) has been extensively studied as a concept that aggregates multiple resource forms to serve the electricity market. Meanwhile, with the development of energy Internet (EI) Error! Reference source not found., more attention has been focused on the optimization and operation of Integrated energy system (IES), therefore, the introduction and exploration of Multi-energy Virtual power Plant (MVPP) provide possibilities for IES to participate in the Electricity Market and Ancillary Services Market. This paper extracts the flexible electric and heat load in the industrial production process, combining the CHP units and Electric Boiler (EB), which are main heat energy supply devices as well as energy Storage system (ESS) as a MVPP to provide Frequency Regulation (FR) service to the Auxiliary Service Market. Model Predictive control (MPC) method is applied to control the industrial load, the operation of CHP, EB and ESS are gonging to follow the AGC signal issued by the FR market effectively while avoiding impacts on the production process of the factory. Finally, case study validates the effectiveness of the model.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：