检索结果-内蒙古大学图书馆

2020 IEEE/IAS Industrial and Commercial power System Asia, I and CPS Asia 2020

作者： Lv, Xiangyu Li, Dexin Li, Junhui Ge, Changxing Tian, Chunguang Wang, Jiarui Yan, Gangui Electric Power Research Institute State Grid Jilin Electric Power Co. Ltd. Changchun China Key Laboratory of Modern Power System Simulation and Control Renewable Energy Technology Jilin China

ISBN: (纸本)9781728143033

This paper proposes a analysis method of peak shaving demand for power grid, and analyzes the impact of wind power grid connection on power system peak shaving under different wind power permeability, and analysis the operational characteristics of energy storage assisted peak shaving to compare different energy storage systems. Finally, in order to facilitate the implementation and observation of the analysis results, a visual simulation platform was built. The results of the example show that the method described in this paper can accurately analyze the peaking shaving demand under different wind power permeability. At the same time, the total yield of lithium iron phosphate battery is the highest in the choice of energy storage type, which is 497 million yuan/year. All-vanadium redox flow batteries may benefit more than lithium iron phosphate batteries in the future due to battery characteristics. Finally, the visualization platform is true and effective and can fully express the method described in this paper. © 2020 IEEE.

关键词： Wind power

来源：评论

学校读者我要写书评

暂无评论

An Optimization Method Based on Time-Sharing energy Complementation to Determine Transmission Capacity of Wind-CSP Plants Combined System

An Optimization Method Based on Time-Sharing Energy Compleme...

引用

2019 IEEE PES Innovative Smart Grid Technologies Asia, ISGT 2019

作者： Cui, Yang Zhang, Huiquan Huang, Siyu Xu, Boyang Key Laboratory of Modern Power System Simulation and Control Renewable Energy Technology Ministry of Education Northeast Electric Power University Ji Lin China Shenzhen Power Supply Co.ltd Shenzhen China

ISBN: (纸本)9781728135205

Since northwest China has abundant wind and solar resources, constructing the concentrating solar power (CSP) plant near to the wind-generated electricity factory tend to a common form of energy exploiting. How to size for the capacity of the transmission line to meet the demand of delivery of the wind-concentrated solar power (CSP) plant system becomes an intensive problem. Based on the theory of time-sharing energy complementarity, this paper proposes a mathematical optimization model of the integrated output of Wind farm and CSP plant to suppress the power fluctuations. Then, by independently considering the impacts of the thermal storage capacity of CSP plant, the capacity optimization model of transmission line of wind power-CSP combined system is established. The case result demonstrates that the proposed method can reduce the investment cost of transmission line by reasonably configuring the thermal storage capacity of CSP. Moreover, the proposed strategy significantly improves the utilization rate of the transmission line and increases the comprehensive income of the joint generation system. © 2019 IEEE.

关键词： Concentrated solar power

来源：评论

学校读者我要写书评

暂无评论

Combined Optimal Dispatch of Thermal power Generators and energy Storage Considering Thermal power Deep Peak Clipping and Wind energy Emission Grading Punishment

引用

energy Engineering 2024年第4期121卷 869-893页

作者： Junhui Li Xuanzhong Luo Changxing Ge Cuiping Li Changrong Wang Key Laboratory of Modern Power System Simulation and Control&Renewable Energy Technology Northeast Electric Power UniversityMinistry of EducationJilin132012China Songyuan Power Supply Company State Grid Jilin Electric Power Co.Ltd.Songyuan138000China Changchun Power Supply Company State Grid Jilin Electric Power Co.Ltd.Changchun130021China Jilin Electric Power Co. Ltd.Jilin Songhuajiang Thermal Power Generation Co.Ltd.Jilin132012China

Peak load and wind energy emission pressure rise more as wind energy penetration keeps growing,which affects the stabilization of the PS(power system).This paper suggests integrated optimal dispatching of thermal power generators and BESS(battery energy storage system)taking wind energy emission grading punishment and deep peak clipping into ***,in order to minimize wind abandonment,a hierarchical wind abandonment penalty strategy based on fuzzy control is designed and introduced,and the optimal grid-connected power of wind energy is determined as a result of minimizing the peak cutting cost of the ***,considering BESS and thermal power,the management approach of BESS-assisted virtual peak clipping of thermal power generators is aimed at reducing the degree of deep peak clipping of thermal power generators and optimizing the output of thermal power generators and the charging and discharging power of ***,Give an example of how this strategy has been effective in reducing abandonment rates by 0.66% and 7.46% individually for different wind penetration programs,and the daily average can reduce the peak clipping power output of thermal power generators by 42.97 and 72.31 MWh and enhances the effect and economy of system peak clipping.

关键词： BESS wind energy deep peak clipping virtual peak clipping wind energy emission grading punishment

来源：评论

学校读者我要写书评

暂无评论

Generator model validation and parameter calibration based on PMU measurement data 3

Generator model validation and parameter calibration based o...

引用

3rd IEEE International Conference on energy Internet, ICEI 2019

作者： Zhang, Yanjun Jiang, He Gao, Kai Zhang, Jian Liu, Jiaqi Wang, Yupeng State Grid Liaoning Electric Power Co Ltd. Shenyang China Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin China

ISBN: (纸本)9781728114934

power system dynamic simulation is an important tool for us to master the dynamic behavior of power systems. It is very important to ensure the credibility of simulation results. Dynamic model validation and calibration has become one of the important applications of concern. In this paper, the method of using the dynamic data recorded by the phasor measurement unit (PMU) to improve the accuracy of the generator model is proposed, including model validation and model parameter id-entifycation. In model validation, the playback of the distur-bance event is used to simulate the response of the model for comparison with the measurement information of the PMU. If the simulation result is inconsistent with the actual mea-surements, the model parameters are not accurate. In the parameter identification step, the perturbation method is used to calculate the trajectory sensitivity of the parameter, and the problematic parameters causing the simulation error is iden-tified, then artificial intelligent method is used to automatically calib-ration the problematic parameters. Finally, other perturbation data is used to validate the credibility of the calibrated generator model, and the results obtained proved that the final calibration model is superior to the existing model. © 2019 IEEE.

关键词： Phasor measurement units

来源：评论

学校读者我要写书评

暂无评论

Coupling Analysis and Protection Design of Substation Grounding Grid and Surrounding Metal Pipe Grid 3

Coupling Analysis and Protection Design of Substation Ground...

引用

3rd International Conference on Machine Learning and Big Data Analytics for IoT Security and Privacy, SPIoT2023

作者： Wang, Tao Yuan, Haojie Zheng, Xuan Song, Mengqing Ma, Chenglian Shandong Electric Power Engineering Consulting Institute Co. Ltd. Jinan China Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Northeast Electric Power University Jilin China

When the substation grounding grid and part of the underground metal pipe grid are close to each other, the two produce resistive coupling, and the current of the transmission line will flow through the grounding body and through the soil to the buried pipe grid, which may break through the anti-corrosion layer of the pipe grid, and may burn the body of the pipe grid in serious cases;the underground metal pipe grid will also have an impact on the parameters of the grounding grid. To this end, this paper is based on the numerical calculation method of field-path coupling, combined with the actual situation of substation, using CDEGS and ETAP software to simulate and analyze the current dissipation process when a short-circuit fault occurs in the substation after the ground grid is put into operation under multi-layer soil environment, and to study the influence of resistive coupling between the grounding grid and the surrounding metal pipe grid during an industrial frequency grounding short circuit. Optimize the structure of the grounding system so that the contact voltage across and step voltage is lower than the safety limit to protect the personal safety in the station;at the same time, take certain protective measures to slow down the corrosion of the pipe grid. © 2023 Elsevier B.V.. All rights reserved.

关键词： Electric grounding

来源：评论

学校读者我要写书评

暂无评论

control and Stability of Large-scale power System with Highly Distributed renewable energy Generation:Viewpoints from Six Aspects

引用

CSEE Journal of power and energy Systems 2023年第1期9卷 8-14页

作者： Qing-Hua Wu Anjan Bose Chanan Singh Joe H.Chow Gang Mu Yuanzhang Sun Zhaoxi Liu Zhigang Li Yang Liu School of Electric Power Engineering South China University of TechnologyGuangzhou 510640China School of Electrical Engineering&Computer Science Washington State UniversityPullmanWA 99164USA Department of Electrical and Computer Engineering Texas A&M UniversityCollege StationTX 77843USA Department of Electrical Computer and Systems EngineeringRensselaer Polytechnic Institute(RPI)TroyNYUSA Key Laboratory of Modern Power System Simulation and Control&Renewable Energy Technology Ministry of Education(Northeast Electric Power University)Jilin 132012China School of Electrical Engineering and Automation Wuhan UniversityWuhan 430072China

power systems are moving toward a low-carbon or carbon-neutral future where high penetration of renewables is *** conventional fossil-fueled synchronous generators in the transmission network being replaced by renewable energy generation which is highly distributed across the entire grid,new challenges are emerging to the control and stability of large-scale power *** analysis and control methods are needed for power systems to cope with the ongoing *** the CSEE JPES forum,six leading experts were invited to deliver keynote speeches,and the participating researchers and professionals had extensive exchanges and discussions on the control and stability of power ***,potential changes and challenges of power systems with high penetration of renewable energy generation were introduced and explained,and advanced control methods were proposed and analyzed for the transient stability enhancement of power grids.

关键词： Distributed energy resources high converter penetration power system control renewable energy generation stability control transient stability

来源：评论

学校读者我要写书评

暂无评论

MODELING METHOD OF OPLC THERMAL CIRCUIT MODEL BASED ON SUPERPOSITION PRINCIPLE 10

MODELING METHOD OF OPLC THERMAL CIRCUIT MODEL BASED ON SUPER...

引用

10th renewable power Generation Conference, RPG 2021

作者： Hu, Bo Wang, He Zhou, Guiping Xu, Xiangsheng State Grid Liaoning Electric Power Co. Ltd. Shenyang China Key Laboratory of Modern Power System Simulation and Control and Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin China

ISBN: (纸本)9781839536069

Optical fiber composite low-voltage cable which combines optical fiber and power cable organically plays an important role in the construction of smart grid and the development of energy internet. The change of temperature impacts the working state of the OPLC and the precision of parameter measurement. Thus, the establishment of the OPLC thermal circuit model has important practical significance. Focusing on the attributes of different kinds and various constructions of the OPLC, this paper proposes an OPLC modeling method based on the superposition principle. Firstly, the asymmetric OPLC is equivalent to several symmetric sub-models, and then each model is superimposed by superposition principle. Secondly, the particle swarm algorithm is utilized to realize the model boundary distinguishing identification, improve the accuracy of the parameters, acquire a precise thermal circuit model, and then realize the accurate calculation of temperature at different positions of OPLC. This paper establishes an OPLC thermal circuit model based on the four-cable core OPLC and proves the effectiveness of the method through simulation analysis and experimental verification. © The Institution of Engineering and technology.

关键词： Optical fibers

来源：评论

学校读者我要写书评

暂无评论

Modeling and small-signal stability analysis of doubly-fed induction generator integrated system

引用

Global energy Interconnection 2023年第4期6卷 438-449页

作者： Tianming Gu Puyu Wang Dingyuan Liu Ao Sun Dejian Yang Gangui Yan Key Laboratory of Modern Power System Simulation and Control&Renewable Energy Technology Ministry of Education(Northeast Electric Power University)Jilin132012P.R.China School of Automation Nanjing University of Science and TechnologyNanjing 210094Jiangsu ProvinceP.R.China

Owing to their stability,doubly-fed induction generator(DFIG)integrated systems have gained considerable interest and are the most widely implemented type of wind turbines and due to the increasing escalation of the wind generation penetration rate in power *** this study,we investigate a DFIG integrated system comprising four modules:(1)a wind turbine that considers the maximum power point tracking and pitch-angle control,(2)induction generator,(3)rotor/grid-side converter with the corresponding control strategy,and(4)AC power *** detailed small-signal modeling of the entire system is performed by linearizing the dynamic characteristic equation at the steady-state ***,a dichotomy method is proposed based on the maximum eigenvalue real part function to obtain the critical value of the ***-locus analysis is employed to analyze the impact of changes in the phase-locked loop,short-circuit ratio,and blade inertia on the system ***,the accuracy of the small-signal model and the real and imaginary parts of the calculated dominant poles in the theoretical analysis are verified using PSCAD/EMTDC.

关键词： Doubly-fed induction generator(DFIG) Maximum power point tracking Dichotomy Small-signal stability

来源：评论

学校读者我要写书评

暂无评论

Complementary Coordinated Dispatch of Multi-energy Systems Considering power Flexibility Margin

Complementary Coordinated Dispatch of Multi-energy Systems C...

引用

2019 IEEE PES Innovative Smart Grid Technologies Asia, ISGT 2019

作者： Xiao, Bai Xiao, Zhiwen Yan, Gangui Jiang, Zhuo Wang, Maochun Yang, Hongzhi Dong, Ling Key Laboratory of Modern Power System Simulation and Control Renewable Energy Technology Northeast Electric Power University Jilin China School of Computer Science and Technology Beihua University Jilin China State Grid Qinghai Electric Power Company Xining China

ISBN: (纸本)9781728135205

In the light of wind and photovoltaic curtailment caused by the lack of flexibility in multi-energy power systems, a method for measuring the flexibility margin of power source is proposed. Aiming at the lowest cost of fuel and atmospheric emission control, a coordinated optimal dispatching model of wind, photovoltaic, hydropower and thermal was constructed. Flexibility balance constraints are introduced into the model, and the model is divided into three dispatching layers: non- water renewable energy, hydropower and thermal power. The net load is updated step by step. Heuristic algorithm is used to determine the thermal power unit combination and particle swarm optimization algorithm is improved to optimize the unit output. Taking a provincial power grid in China as an example, the calculation results show that the model and method can not only as far as possible utilize renewable energy, but also reduce system redundancy and environmental pollution. © 2019 IEEE.

关键词： Heuristic algorithms

来源：评论

学校读者我要写书评

暂无评论

Design of Dual Band Microstrip Filter Based on SIR 19

Design of Dual Band Microstrip Filter Based on SIR

引用

19th International Conference on Optical Communications and Networks, ICOCN 2021

作者： Zheng, Xuemei Gao, Peng Han, Yaru Key Laboratory of Modern Power System Simulation and Control & Renewable Energy Technology Northeast Electric Power University Jilin China Jilin design department China Mobile Design Institute Co. Ltd Changchun China

ISBN: (纸本)9781665424462

As the core device in the field of communication, filter is developing towards miniaturization and high frequency. In this paper, a new dual frequency filter based on step impedance resonator is proposed. The resonant frequencies of the proposed stepped impedance resonator (SIR) dual frequency filter are 2.4GHz and 5.2GHz, and the isolation is greater than 20dB. © 2021 IEEE.

关键词： Microstrip filters

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：