检索结果-内蒙古大学图书馆

An improved model on the evaporation kinetics of the single aerosol droplet and its application for the droplet composed of ammonium sulfate or sucrose solution

引用

POWDER TECHNOLOGY 2025年 453卷

作者： Zhang, Chao Lu, Miaoran Bao, Han Ma, Nan Yu, Dandan Yang, Yang Wang, Yueshe Wiedensohler, Alfred Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Univ Shanghai Sci & Technol Shanghai Key Lab Multiphase Flow & Heat Transfer P Shanghai 200093 Peoples R China Jinan Univ Inst Environm & Climate Res Guangzhou 511443 Peoples R China Xi An Jiao Tong Univ State Key Lab Multiphase Flow Power Engn Xian 710049 Peoples R China Leibniz Inst Tropospher Res D-04318 Leipzig Germany

An improved model is proposed to investigate effects of gas phase temperature, relative humidity and initial solute concentration on the evaporation rate of the aerosol droplet consisted of ammonium sulfate (AS) or sucrose (SC) solution and the water diffusion coefficient in bulk phase. Results show that the new model is more accurate than the traditional model ignoring the bulk phase mass diffusion. Effect of the bulk phase mass diffusion on the evaporation rate of the AS-water droplet is almost unaffected by factors studied here due to the predominance of the mass transfer in gas phase and gas-droplet interface. However, effect of the bulk phase mass diffusion on the evaporation rate of the SC-water droplet is negatively correlated with the gas phase temperature and the relative humidity, but it is positively correlated with the initial solute concentration. Furthermore, influence mechanisms of the water diffusion coefficient in AS (SC)-water droplets are revealed.

关键词： Aerosol droplets Evaporation Theoretical model Mass diffusion

来源：评论

学校读者我要写书评

暂无评论

Experimental and numerical study on scroll compressor under different profile correction and discharge ports shapes

引用

INTERNATIONAL JOURNAL OF REFRIGERATION 2025年 169卷 241-253页

作者： Li, Kang Li, Chunyu Mohtaram, Soheil Liu, Ni Zhang, Hua Dou, Binlin Li, Chao He, Qize Abul Hasan, Mohd Islam, Saiful Wang, Jingwu Wang, Zilong Chen, Jianhong Aryanfar, Yashar Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Univ Shanghai Sci & Technol Key Lab Multiphase Flow & Heat Transfer Shanghai P Shanghai 200093 Peoples R China Invest Design & Res Inst Co Ltd Shanghai 200080 Peoples R China Shanghai Fire Res Inst MEM Shanghai 200032 Peoples R China King Khalid Univ Coll Engn Civil Engn Dept Abha 61421 Saudi Arabia Tsinghua Univ Hefei Inst Publ Safety Res Hefei 230601 Peoples R China Shanghai Yuanliu New Energy Technol Co Ltd Shanghai Peoples R China Hohai Univ Natl Key Lab Water Disaster Prevent Nanjing 211100 Jiangsu Peoples R China Autonomous Univ Ciudad Juarez Dept Elect Engn & Comp Sci Ciudad Juarez 32310 Mexico Khazar Univ Dept Mech Engn Thermo Fluids Res Grp Baku AZ Azerbaijan

The scroll compressor is an essential component in air conditioning and heat pump systems. This study examined an electric scroll compressor using R22 refrigerant, focusing on how modifications in the scroll head profile and discharge structure affect its performance. Initially, a semi-empirical model based on mathematical formulas was developed to predict the performance improvements of the updated scroll compressor. Three-dimensional simulation software was then used to illustrate changes in the internal flow dynamics before and after enhancements. The predictions were validated through experimental testing. Both the semi-empirical model and the three-dimensional unsteady numerical calculation model analyzed the effects of modifications to the tooth head profile and discharge port shape on compressor performance. The adoption of a PMP profile correction delayed the compressor discharge process, shifting the starting discharge angle from 315 degrees to 344 degrees, thereby reducing under-compression occurrences during operation and increasing volumetric efficiency by 1.31%. Additionally, mathematical formulas correlating temperature with compressor performance were developed from fitting data, predicting compressor behavior under various conditions. Moreover, replacing a circular discharge port with a waist-shaped port reduced power consumption by 0.59 kW, resulting in a more uniform temperature distribution and enhanced mass flow rate during compressor operation.

关键词： Electric scroll compressor Complete meshing profiles Discharge port shapes Compressor model flow field

来源：评论

学校读者我要写书评

暂无评论

flow regime shift and temperature model of the radiation-induced convection system under surface cooling

引用

PHYSICS OF FLUIDS 2025年第3期37卷

作者： Zhou, Rui-Rui Yang, An-Wen You, Xiao-Gang Liu, Yun Sun, Ya-Song Li, Ling Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai Key Lab Multiphase Flow & Heat Transfer P Shanghai 200093 Peoples R China Northwestern Polytech Univ Sch Power & Energy Shaanxi Key Lab Thermal Sci Aeroengine Syst Xian 710072 Peoples R China Changan Univ Sch Energy & Elect Engn Shaanxi Key Lab New Transportat Energy & Automot E Xian 710018 Peoples R China

The natural convection flow in the translucent fluid layer subjected to solar radiation heating plays a crucial role in the daytime heat and mass transfer in water bodies and solar energy collection. In a radiation-induced convection system under surface cooling, there are two possible flow regimes: the triple-layer and single-layer regimes. The flow regimes have a great influence on the mixing of fluid. The fluid is thermally stratified in the triple-layer regime, which should be avoided in the volumetric solar collector. In this paper, the transition condition of the flow regime shift between the triple-layer regime and the well-mixed single-layer regime is deduced since the thicknesses of the top and bottom mixing layers can be predicted through energy conservation analysis. Furthermore, a scaling analysis is conducted to obtain the scaling laws for the temperature differences across the thermal boundary layers regarding the control parameters, i.e., the Rayleigh number Ra, the Prandtl number Pr, the non-dimensional surface cooling heat flux phi, and the non-dimensional fluid depth H. A series of direct numerical simulations with the parameters in the range of 10(7) <= Ra <= 10(10), 0.7 <= Pr <= 70, 0 <= phi <= 0.7, and 0.5 <= H <= 3 are carried out to quantify the prefactor of scaling laws and also to validate the transition condition of the flow regime-shift. Then, a one-dimensional model can be developed to predict the temperature profile over the fluid depth with arbitrarily specified parameters. Thanks to the advantage of rapid and accurate prediction, this temperature model has a potential application for the design of the volumetric solar collector.

关键词： Prandtl number

来源：评论

学校读者我要写书评

暂无评论

Numerical and experimental research of the characteristics of concentration solar cells

引用

Frontiers in Energy 2021年第2期15卷 279-291页

作者： Zilong WANG Hua ZHANG Binlin DOU Weidong WU Guanhua ZHANG Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering School of Energy and Power EngineeringUniversity of Shanghai for Science and TechnologyShanghai 200093China

The development of automatic tracking solar concentrator photovoltaic systems is currently attracting growing *** concentration photovoltaic systems(HCPVs)combining triple-junction InGaP/lnGaAs/Ge solar cells with a concentrator provide high conversion *** mathematical model for triple-junction solar cells,having a higher efficiency and superior temperature characteristics,was established based on the one-diode equivalent circuit cell model.A paraboloidal concentrator with a secondary optic system and a concentration ratio in the range of 100X–150X along with a sun tracking system was developed in this *** GaInP/GalnAs/Ge triple-junction solar cell,produced by AZUR SPACE Solar power,was also used in this *** solar cells produced by shanghai Solar Youth Energy(SY)and Shenzhen Yinshengsheng Technology ***.(YXS)were used as comparison samples in a further comparative study at different concentration ratios(200X–1000X).A detailed analysis on the factors that influence the electrical output characteristics of the InGaP/lnGaAs/Ge solar cell was conducted with a dish-style concentrating photovoltaic *** results show that the short-circuit current(Isc)and the open-circuit voltage(Voc)of multi-junction solar cells increases with the increasing concentration ratio,while the cell efficiency(ηc)of the solar cells increases first and then decreases with increasing concentration *** increasing solar cell temperature,Isc increases,while Voc andηc decrease.A comparison of the experimental and simulation results indicate that the maximum root mean square error is less than 10%,which provides a certain theoretical basis for the study of the characteristics of triple-junction solar cell that can be applied in the analysis and discussion regarding the influence of the relevant parameters on the performance of high concentration photovoltaic systems.

关键词： concentration three-junction solar cell mathematical model electrical properties solar energy

来源：评论

学校读者我要写书评

暂无评论

A Li-O2 battery model coupled with LiO2 and Li2O2 reveals regulation mechanism of deposited product composition on mass transport and electron transfer

引用

APPLIED ENERGY 2025年 391卷

作者： Wang, Yuanhui Zang, Linfeng Dou, Shaojun Hao, Liang Yanshan Univ Sch Vehicle & Energy Hebei Engn Res Ctr Low Carbon Dev & Resource Utili Qinhuangdao 066004 Peoples R China Dalian Univ Technol Sch Energy & Power Engn Dalian 116024 Peoples R China Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai Key Lab Multiphase Flow & Heat Transfer P Shanghai 200093 Peoples R China

To elucidate the regulation mechanism of deposited product composition on the coupling process of mass transport and electron transfer in lithium-oxygen (Li-O2) batteries, a novel multi-step discharge/charge model with solid lithium superoxide (LiO2(s)) and lithium peroxide (Li2O2) as hybrid precipitation is proposed. This model couples the dynamic competitive growth mechanisms between LiO2(s) and Li2O2, while incorporating the asymmetric deposition and decomposition behaviors of Li2O2. The electrode surface passivation caused by the sluggish kinetic rate of electron across the Li2O2 film is solely responsible for the deep discharge termination based on the reduced graphene oxide cathode. LiO2(s) dominates the precipitation products with a limited capacity and a continuous decline in the LiO2(s) percentage with discharge depth. Although promoting the LiO2(s) formation is conducive to alleviating the electrode surface passivation, it aggravates the O2 transport resistance due to occupying more electrode pores with the same charge contribution. Hence the discharge capacity demonstrates a three-stage variation with increasing lithium superoxide (LiO2) formation rate, which rapidly grows by more than two times in stage 2 benefiting from the increased LiO2(s) percentage and enhanced solution mechanism. Whereas a slow rise of 32 % in the discharge capacity in stage 3 is attributed to the conversion of LiO2(s) to Li2O2 toroid for the discharge process controlled by O2 transport. An increase in the thickness or specific surface area of the cathode improves the discharge capacity mainly by facilitating the production of Li2O2 toroid despite the decrease in the LiO2(s) percentage, which is different from the regulatory mechanism of electrode porosity for accelerating the LiO2(s) formation. Increasing LiO2 solubility predominantly mitigates the electrode surface passivation through enhancement of the solution pathway, whereas the elevated O2 solubility synergistically facilita

关键词： Li-O-2 batteries Multistep discharge/charge model LiO2(s)/Li2O2 hybrid precipitation Reaction pathway regulation Surface passivation/O-2 transport

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation of flow characteristics for a labyrinth passage in a pressure valve

引用

Journal of Hydrodynamics 2016年第4期28卷 629-636页

作者：王海民赵越汪建兴孔祥帅刘欢李科良王喜芳 School of Energy and Power Engineering University of Shanghai for Science and Technology Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology

A tortuous labyrinth passage consists of a series of right angle turns in a disk of high pressure control *** this paper,numerical simulations are made for the velocity and pressure distributions in this *** is shown that the “series passage” can induce a pressure dropping more *** main function of the “series passage” is to induce a pressure dropping while the “parallel passage” is mainly to regulate the *** a cross sectional area process,a series of reduction and expansion,the pressure will also see dropping and partial recovery,which is called the multistage pressure *** this way,the velocity can be controlled in a reasonable level anywhere in this tortuous labyrinth *** the fluid pressure dropping in a downwards serrated way,the pressure is higher than the local saturate vapor pressure,therefore,no cavitation is induced by the phase transition.

关键词： passage valve dropping multistage turns sectional anywhere regulate vortex inlet

来源：评论

学校读者我要写书评

暂无评论

Insights on CDI parametric controls and dependencies using gloabal sensitivity analysis

引用

SEPARATION AND PURIFICATION TECHNOLOGY 2025年第Part8期354卷

作者： Qin, Huai Fang, Fang Mao, Yunfeng Xu, Longqian Wu, Deli Univ Shanghai Sci & Technol Sch Energy & Power Engn Shanghai 200093 Peoples R China Shanghai Key Lab Multiphase Flow & Heat Transfer P Shanghai 200093 Peoples R China Zhejiang Prov Ind EP Design & Res Inst Co Ltd Shangyu 310013 Zhejiang Peoples R China Tongji Univ Coll Environm Sci & Engn State Key Lab Pollut Control & Resources Reuse Shanghai 200092 Peoples R China Vanderbilt Univ Dept Civil & Environm Engn Nashville TN 37235 USA

Capacitive deionization (CDI) emerges as a promising desalination technology due to its high energy efficiency and potential for energy recovery. Its performance improvement and application extension highly require understanding how variations in multiple input parameters, as well as their interactions, lead to variations in output, which is not straightforward in the complex system of CDI. In this work we use the extended Fourier amplitude sensitivity test (eFAST) method to conduct a global sensitivity analysis (GSA) in order to examine the effects of several parameters, including material properties, operating conditions, and ionic properties, on the energy consumption and salt removal efficiency of CDIs. The research reveals that high capacitance and efficient mass transfer are crucial for CDI advancement, with a trade-off between desalination rate and energy efficiency. The interplay between input parameters is revealed by factorial design and GSA, which show that no single parameter alone determines salt adsorption capacity but that feedwater salt concentration and current density are important when considering both individual and coupled effects. The study suggests that the specific application and feedwater characteristics should be taken into consideration when deciding between the CC and CV modes of desalination. While CC mode excels in water production and energy efficiency for high salinity feedwater pretreatment, CV mode is better at treating low salinity waterr. The comprehensive parametric analysis provides valuable insights into optimizing CDI design and operating conditions to balance desalination capacity and energy efficiency.

关键词： Capacitive deionization Mass transfer model Global sensitivity analysis Constant current mode Constant voltage mode

来源：评论

学校读者我要写书评

暂无评论

Experimental study on dynamic mechanism of vortex evolution in a turbulent boundary layer of low Reynolds number

引用

Journal of Hydrodynamics 2020年第5期32卷 807-819页

作者： Yan-ang Guo Xiang-rui Dong Xiao-shu Cai Wu Zhou School of Energy and Power Engineering University of Shanghai for Science and TechnologyShanghai 200093China Key Laboratory of Multiphase Flow and Heat Transfer in Shanghai Power Engineering Shanghai 200093China

The dynamic mechanism of the vortex generation and evolution process in a fully developed turbulent boundary layer with Reθ=97-194 is experimentally *** this study,a moving single-frame and long-exposure(MSFLE)imaging method and a moving particle image velocimetry/particle tracing velocimetry(M-PIV/PTV)are designed and implemented for measuring the temporal and spatial evolution of vortex cores in both qualitative and quantitative ways,*** the other hand,the Liutex vector,which is a new mathematical definition and identification of the vortex core proposed by Liu’s group,is first applied in the experiment for the structural visualization and quantitative analysis of the local fluid *** results show that an intuitional process of vortex evolution can be clearly observed by tracking the vortex using MSFLE and verify that the roll-up of the shear layer induced by shear instability is the origin of vortex formation in ***,a quantitative investigation in terms of the critical vortex core boundary(size)and its accurate rotation strength is carried out based on the Liutex vector field analysis by M-PIV/*** to statistics of the relation between vortex core size and the rotation strength during the whole process,the physical mechanism of vortex generation and evolution in a turbulent boundary layer of low Reynolds number can be summarized as a four-dominant-state course consisting of the“synchronous linear segment(SL)-absolute enhancement segment(AE)-absolute diffusion segment(AD)-skewing dissipation segment(SD)”.

关键词： Turbulent boundary layer high-and low-speed fluid vortex generation moving single-frame and long-exposure moving particle image velocimetry/particle tracing velocimetry Liutex vector

来源：评论

学校读者我要写书评

暂无评论

Modeling and prediction of ultrasonic attenuations in liquid-solid dispersions containing mixed particles with Monte Carlo method

引用

Particuology 2019年第2期17卷 84-91页

作者： Jianfei Gu Fengxian Fan Yunsi Li Huinan Yang Mingxu Su Xiaoshu Cai Institute of Particle and Two-Phase Flow Measurement/Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai 200093 China

We develop a theoretical model for predicting the ultrasonic attenuation in the liquid-solid system containing mixed particles. The ultrasonic attenuation coefficient is obtained by counting the number of phonons that reach the receiver. Using the Monte Carlo method (MCM), numerical simulations were performed to predict the ultrasonic attenuations with not only a single particle type but also monodisperse and polydisperse mixed particles. The simulation results for the systems with a single particle type were compared with various standard models. The results show that they agree well at relatively low particle volume concentrations (within 10%). For systems with mixed particles, the particle volume concentrati on was found to in crease to around 10%, and the variation of the ultrasonic attenuation agai nst the mixing ratio yields a nonlinear trend. Moreover, the ultrasonic attenuation is significantly affected by particle properties. The numerical results also show that both the particle type and particle size distribution should be carefully taken into account in the dispersions with polydisperse mixed particles, where the MCM can give a more direct description of the physics of sound propagation compared with the conventional models.

关键词： Ultrasound Ultrasonic attenuation Monte Carlo method Particle size measurement

来源：评论

学校读者我要写书评

暂无评论

Influence of Soil-Structure Interaction Models on the Dynamic Responses of An Offshore Wind Turbine Under Environmental Loads

引用

China Ocean engineering 2023年第2期37卷 218-231页

作者： TANG Hong-ming YUE Min-nan YAN Yang-tian LI Zhi-hao LI Chun NIU Kai-lun School of Energy and Power Engineering University of Shanghai for Science and TechnologyShanghai 200093China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering Shanghai 200093China

Offshore wind turbines(OWTs) suffer wind, wave and earthquake loads. The investigation of OWTs' dynamic response under environmental loads is essential for structural safety assessment. The soil-structure interaction(SSI)significantly affects the responses of OWT under environmental loads. However, there is few systematic research about the difference in the dynamic response of different SSI models under environmental loads. In order to solve the problem, the OWT is modeled by shell element, and several SSI models are built. The wind, wave and earthquake loads are taken into account. Moreover, the dynamic response, fatigue and buckling analysis are performed by ANSYS. The results indicate that SSI cannot be ignored in the dynamic response of the OWT under wind and wave loads. The SSI can decrease the displacement response of the OWT by 19% under wind and wave loads and reduce the fatigue damage of the pile. Multi-layer SSI can strongly influence the OWT's dynamic response under wind and wave loads or earthquake-only load. The vertical earthquake load increases the dynamic response in three ***, in order to simulate real environment, multi-layer SSI, soil damping and vertical SSI must be considered to evaluate the displacement response of the OWT under wind, wave and earthquake loads. The earthquake and gravity loads can cause more obvious response of the OWT than that of only wind and wave loads. The top and bottom of the tower are prone to occur buckling.

关键词： OWT soil structure interaction earthquake dynamic analysis structural damage

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：