检索结果-内蒙古大学图书馆

SSRN 2025年

作者： Ou, Pingwen Chen, Yongzheng Chen, Peng Ouyang, Yong Guo, Chao Su, Guanghui China Nuclear Power Technology Research Institute Co. Ltd. Shenzhen518000 China State Key Laboratory of Nuclear Power Safety Technology and Equipment China Nuclear Power Technology Research Institute Co. Ltd. Shenzhen518000 China School of Nuclear Science and Technology Xi'an Jiaotong University Shaanxi Xi’an710049 China State Key Laboratory of Multiphase Flow in Power Engineering China

This study focuses on the uncertainty and sensitivity analysis of containment aerosol removal under severe accident conditions using the severe accident integral code ASTEC, validated by experiments carried by CNPRI, and the coupled uncertainty and sensitivity tool SUNSET. A "separated" methodology is introduced, which distinguishes between thermal-hydraulic and aerosol boundary conditions to highlight the impact of containment aerosol mechanisms. Eleven uncertainty input parameters related are selected for uncertainty propagation and the Spearman correlation coefficient is utilized to describe sensitivity. The removal factor exhibits significant variation, with peaks due to temporary enhancement of diffusiophoresis deposition caused by corium relocation and subsequent steam generation. Uncertainty in the removal factor is substantial before aerosol release termination and narrows afterward. The gravitational settling and the diffusiophoresis deposition are the most important contributors with approximately 70% and 20% deposited aerosol mass, respectively. The initial mass medium diameter, the gravitational shape factor and the agglomeration shape factor are the most influential input parameters in aerosol removal, including in-containment deposition and environmental release, and they should be considered discreetly with conservatism in source term estimation and radioactive consequence evaluation in nuclear engineering. © 2025, The Authors. All rights reserved.

关键词： Sensitivity analysis

来源：评论

学校读者我要写书评

暂无评论

X-ray computed tomography (XCT) study of jetting in a fluidized bed: Effects of two-component fluidization

引用

Particuology 2025年 102卷 264-274页

作者： Zhong Xiang Xi Chen Shuguang Liu Theodore J. Heindel School of Energy and Environment Southeast University Nanjing 210096 China State Key Laboratory of Low-carbon Smart Coal-fired Power Generation and Ultra-clean Emission Southeast University Nanjing 210096 China Center for Multiphase Flow Research and Education and Department of Mechanical Engineering Iowa State University Ames IA 50011 USA

Fluidization of non-spherical particles is commonly found in the biomass and solid waste processing industry, and the jetting characteristic above the aeration plate is critical to the fluidization performance of these particles. In this study, cylindrical particles are used as typical non-spherical particles and co-fluidized with small bed material particles. X-ray computed tomography (XCT) is used to reconstruct the 3D structure of the aeration plate region, allowing for the identification of individual aeration jets. The effects of jet velocity ( U j ), cylindrical particle mass fraction ( ω ), cylindrical particle density ( ρ i ), and the cylindrical particle sphericity ( ϕ ) on jet shape and volume are investigated. The experimental results indicate that decreasing the cylindrical particle mass fraction ( ω ) and particle density ( ρ i ) increases the jet length ( L ), maximum jet diameter ( D ), and maximum jet volume ( V ), but have little effect on the jet half angle ( θ ). The cylindrical particle density ( ρ i ) is the most sensitive factor for jet shape, while the effect of cylinder particle sphericity ( ϕ ) on jet shape is insignificant. A correlation of jet length ( L ) in a two-component fluidized bed with cylindrical particles and bed material is proposed based on all the experimental results.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Simulation study of channel structural design for direct internal reforming methane solid oxide fuel cell

引用

Applied Thermal engineering 2025年 274卷

作者： Wu, Wenzhao Bi, Xiaobing Lv, Xuecheng Li, Yang Zhou, Zhifu Wu, Wei-Tao Wei, Lei Lyu, Jizu Li, Yubai Song, Yongchen Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education Dalian University of Technology Dalian116024 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China School of Mechanical Engineering Nanjing University of Science and Technology Nanjing210094 China Department of Mechanical and Energy Engineering Southern University of Science and Technology Shenzhen518055 China School of Mechanical Engineering Guangdong Ocean University Zhanjiang524088 China

Reasonable designs on channels could effectively improve cell performance. This study established a 3D model of planar solid oxide fuel cell directly fueled by methane to investigate the impacts of three independently designed channel structures. This includes modifications to the channel cross-sectional shape (trapezoid and bow), inserting petal-shaped obstacles (single-layer and double-layer), and the study of deflector sheets embedded into the anode channel to address the highly endothermic nature of the methane steam reforming reaction. The research results indicated that, whether trapezoidal or bowed cross-sections are used, the current density achieves the largest growth rate at L_a = 1.5W_CH (16.06 % for bow and 15.53 % for trapezoid). Additionally, double-layer obstacles provide a greater enhancement of current density than single-layer obstacles (11 % for single-layer, 18 % for double-layer) and result in smaller and more uniform fuel flow velocity distribution in the channel. Embedding two or three deflector sheets into the anode channel significantly reduces the maximum temperature difference (by 7 K for two sheets;by 10 K for three sheets, representing a nearly 48 % reduction) and notably improves the temperature distribution uniformity. The study provides a novel perspective on channels alteration which could contribute to the advancement of researches on high-efficiency SOFCs. © 2025 Elsevier Ltd

关键词： Deflection (structures)

来源：评论

学校读者我要写书评

暂无评论

Teardrop-like micro pin fin coated nanotube arrays chip for enhancement of flow boiling electronics cooling

引用

International Journal of Thermal Sciences 2025年 214卷

作者： Chen, Hongqiang Gao, Quan Ma, Xiang Li, Kai Du, Wangfang Li, Caifeng Zhang, Yonghai Wei, Jinjia School of Chemical Engineering and Technology Xi'an Jiaotong University 28 Xianning West Road Shaanxi Xi'an710049 China Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China National Microgravity Laboratory Institute of Mechanics Chinese Academy of Sciences Beijing100190 China School of Engineering Science University of Chinese Academy of Sciences Beijing100149 China Xi'an Shaangu Power Co. Ltd. Xi'an710075 China

Phase change flow boiling heat transfer in microchannel is a very efficient thermal management mode for high-power electronics/devices cooling. However, achieving comprehensive enhancement of flow boiling heat transfer performance at low power consumption is still challenging. Herein, we devised and manufactured a teardrop-like micro-pin-fin coated stable copper hydroxide nanotubes array chip surfaces (S-Nanotube), demonstrating their exceptional enhancement in flow boiling heat transfer efficiency. A series of experiments were conducted using HFE-7100 as a working fluid within a semi-open microchannel. Compared to the smooth surface, the critical heat flux (CHF) and the maximum boiling heat transfer coefficient (HTC) of the S-Nanotube is increased by 82.1 % (from 45.1 to 72.9 and then to 82.1 W/cm2) and 140.5 % (from 5955 to 11,325 and then to 14,316 W/m2·K) at extremely low-pressure drop (≤4 kPa), showing a high coefficient of performance (COP). The temperature of the onset of nucleate boiling on the S-Nanotube surface is reduced by 26.4 %, and the heat flux is greatly increased in a small wall temperature variations (ΔT ≤ 10 °C). In situ observation and analysis of the surface properties and the bubble dynamics, the S-Nanotube chip promotes the phase change heat transfer process by providing massive nucleation sites, reducing bubbles size and residence time, and enhancing the wicking wetting capacity. These findings provide guidance for the rational design of boiling heat transfer-enhanced surfaces and heat sinks and point the way to achieving efficient thermal management of power devices. © 2025 Elsevier Masson SAS

关键词： Electronic cooling

来源：评论

学校读者我要写书评

暂无评论

Thermodynamics analyses on a novel CHP system integrated with multi-grade thermal energy storage

引用

Journal of Energy Storage 2025年 106卷

作者： Liu, Rongtang Zhang, Kezhen Qin, Yuanzhi Wan, Kaidi Xu, Can Liu, Ming Ningbo Institute of Technology Beihang University Ningbo315800 China Xi'an Thermal Power Research Institute Co. Ltd. Xi'an710054 China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China Dongfang Boiler Co. Ltd. of Dongfang Electric Group Chengdu611731 China

The high penetration level of intermittent renewable power necessitates the crucial requirement for combined heat and power systems to possess both high efficiency and flexibility. However, the heat-controlled operation modes of traditional combined heat and power systems impose limitations on their efficiency and flexibility. Therefore, it is of great significance to develop a heat-power decoupling technology that exhibits exceptional efficiency and flexibility. A novel combined heat and power system integrated with multi-grade thermal energy storage is proposed in this study. Thermodynamic analysis models of all operational conditions are developed, and the comprehensive characteristics of efficiency and operational flexibility for the proposed system are assessed by taking a 330 MW system as an example. Results show that the proposed system can decrease/increase 16.05 MW/30.96 MW power loads comparing with the reference system during the charging/discharging periods under the design condition. Energy efficiency of the proposed system can reach 49.40 %, which is improved by 1.66 percentage points. Exergy analysis reveals the exergy destruction order for the proposed system, and shows that the combustion and heat transfer in the boiler are the major process of exergy dissipation. Moreover, operation strategies of the proposed system during charging-discharging cycle are explored and formulated under off-design condition, suggesting that thermodynamic performances of the novel system under various conditions even extreme conditions exhibits exceptional properties. The maximum heat load of the proposed system can be improved by 46.78 % comparing with the reference system, and the maximum improvement of power load capacity during charging-discharging cycle is 14.58 percentage points. This study provides a promising approach for multi-grade thermal energy storage to improve the comprehensive characteristics of combined heat and power systems. © 2024

关键词： Charge storage

来源：评论

学校读者我要写书评

暂无评论

Numerical Investigation of the Thermal Response to Skin Tissue during Laser Lipolysis

引用

Journal of Thermal Science 2018年第5期27卷 470-478页

作者： CHEN Bin ZHANG Yue LI Dong State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

Laser lipolysis can effectively treat obesity and its associated diseases, such as hypertension, fatty liver, and hyperlipidemia. However, currently available invasive laser lipolysis, which transmits laser to a fiber-optic catheter inserted into the subcutaneous tissue for irradiation through an incision, may cause hematomas, infections, and empyrosis. The current study presents a novel, noninvasive approach for laser lipolysis, which directly irradiates the intact skin surface without an incision and preferentially targets adipose tissue at the near-infrared band. High laser energy is necessary to damage adipocytes; however, this may carbonate and burn the dermis. Therefore, the introduction of skin cooling is essential to avoid unwanted hyperthermal injury and improve the threshold of radiant exposure. In the current study, we investigated a novel noninvasive approach assisted with skin cooling by establishing a homogeneous multi-layer skin model. In this method, light propagation in the skin was simulated by using the Monte Carlo method. Skin cooling was employed before laser irradiation to protect the epidermis from thermal damage, which was treated as a boundary condition based on Newton's law. The numerical results showed that the photons were deposited in the adipose layer more than in the other layers. Laser can effectively destroy adipose tissue at an energy density of >200 J/cm^2 at 1210 nm wavelength, whereas at least 300 J/cm^2 is required at 1064 nm to achieve the same effect. In this experiment, at >5 s pulse width, the selectivity of adipose was not obvious. Moreover, the results indicated that 60 ms R134a or R404a spray can effectively reduce the temperature of the epidermis. R404a exhibited a stronger cooling effect than R134a. Cold air cooling at -10 °C for 10 s could effectively decrease the skin temperature, and deeper cooling could be achieved by cold air cooling compared with cryogen spray cooling.

关键词： laser lipolysis Nd：YAG laser multi-layer skin model skin cooling

来源：评论

学校读者我要写书评

暂无评论

Experimental Investigation on Heat Transfer Characteristics of Water in Inclined Downward Tube of a Supercritical Pressure CFB Boiler

引用

Journal of Thermal Science 2015年第5期24卷 478-487页

作者： WANG Siyang YANG Dong XIE Beibei WANG Long WANG Yongjie State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University

In this study, experiments have been performed for an investigation on heat transfer of water in an inclined downward tube with an inner diameter of 20 mm and an inclined angle of 45° from the horizon, with the range of pressure from 11.5 to 28 MPa, mass flux from 450 to 1550 kg/(m2 s), and heat flux from 50 to 585 k W/m2. Based on the experimental data, the temperature distribution in the tube wall was derived. The heat transfer characteristics of inclined downward flow were compared with that of vertical downward flow. The effects of heat flux on wall temperature were analyzed and the corresponding empirical correlations were presented. The results show that heat transfer characteristics of water in the inclined downward tube are not uniform along the circumference from the top surface to the bottom surface. An increase in heat flux exacerbates the non-uniformity. At subcritical pressures, both dry-out and departure from nucleate boiling(DNB) occur at the top surface of the inclined downward tube; inversely, only dry-out takes place on the bottom surface of the inclined downward tube and in the vertical downward tube. At near-critical pressures, DNB and dry-out occur in the comparing tubes with greater possibility. At supercritical pressures, heat transfer gets enhanced in the pseudo-critical enthalpy region; in the high enthalpy region, the top surface temperature of the inclined downward tube decreases obviously.

关键词： inclined downward tube wall temperature circumferential non-uniformity heat transfer deterioration

来源：评论

学校读者我要写书评

暂无评论

Unveiling micro- and nanoscale bubble dynamics for enhanced electrochemical water splitting

引用

Advances in Colloid and Interface Science 2025年 343卷 103544页

作者： Lu, Xinlong Yadav, Devendra He, Baichuan Zhou, Yu Zhou, Liwu Zeng, Zilong Ma, Lijing Jing, Dengwei International Research Center for Renewable Energy & State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shaanxi Xi'an710049 China Department of Chemical Engineering Technion - Israel Institute of Technology Haifa3200003 Israel College of Mechanical Engineering Xi'an Shiyou University Shaanxi Xi'an710065 China

Bubbles generated during electrochemical and photoelectrochemical water splitting critically influence efficiency through complex factors, including chemical reactions, species transport, mass transfer at the three-phase interface, and bubble coverage. A detailed understanding of the nucleation, growth, coalescence, and detachment of micro- and nanoscale bubbles is vital for advancing water splitting technologies. Surface-attached bubbles significantly reduce the electrocatalytically active area of electrodes, leading to increased surface overpotential at a given current density. Consequently, their effective removal is pivotal for optimizing the electrolysis process. However, the intricate interplay among single bubble evolution, mass transport, bubble coverage, and overpotential remain inadequately understood. This review explores the fundamental mechanisms underpinning bubble evolution, with an emphasis on the Marangoni effect and its influence on bubble dynamics. Furthermore, recent advancements in understanding individual bubbles on micro and nano-electrodes are highlighted, offering valuable insights into scale-dependent bubble behavior. These findings enrich our knowledge of gas-liquid interfacial phenomena and underscore their industrial significance, presenting opportunities to enhance water splitting performance through optimized bubble dynamics. © 2025

关键词： Electrolysis

来源：评论

学校读者我要写书评

暂无评论

Industrialization prospects for hydrogen production by coal gasification in supercritical water and novel thermodynamic cycle power generation system with no pollution emission

引用

Science China(Technological Sciences) 2015年第12期58卷 1989-2002页

作者： GUO LieJin JIN Hui GE ZhiWei LU YouJun CAO ChangQing State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

Energy conversion and utilization, particularly carbon-based fuel burning in air phase, have caused great environmental pollution and serious problems to society. The reactions in water phase may have the potential to realize clean and efficient energy conversion and utilization. Coal gasification in supercritical water is a typical carbon-based fuel conversion process in water phase, and it takes the advantages of the unique chemical and physical properties of supercritical water to convert organic matter in coal to H2 and CO2. N, S, P, Hg and other elements are deposited as inorganic salts to avoid pollution emission. The State key laboratory of multiphase flow in power engineering has obtained extensive experimental and theoretical results based on coal gasification in supercritical water. Supercritical water fluidized bed reactor was developed for coal gasification and seven kinds of typical feedstock were selected. The hydrogen yield covers from 0.67 to 1.74 Nm3/kg and the carbon gasification efficiency is no less than 97%. This technology has a bright future in industrialization not only in electricity generation but also in hydrogen production and high value-added chemicals. Given the gas yield obtained in laboratory-scale unit, the hydrogen production cost is U.S.$ 0.111 Nm3 when the throughput capacity is 2000 t/d. A novel thermodynamic cycle power generation system based on coal gasification in supercritical water was proposed with the obvious advantages of high coal-electricity conversion efficiency and zero pollutant emission. The cost of U.S.$ 3.69 billion for desulfuration, denitration and dust removal in China in 2013 would have been saved with this technology. Five kinds of heat supply methods are analyzed and the rates of return of investment are roughly estimated. An integrated cooperative innovation center called a new type of high-efficient coal gasification technology and its large-scale utilization was founded to enhance the industrialization o

关键词： industrialization prospects hydrogen production supercritical water gasification power generation zero emission

来源：评论

学校读者我要写书评

暂无评论

Numerical Analysis of flow Instability in the Water Wall of a Supercritical CFB Boiler with Annular Furnace

引用

Journal of Thermal Science 2016年第4期25卷 372-379页

作者： XIE Beibei YANG Dong XIE Haiyan NIE Xin LIU Wanyu State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University

In order to expand the study on flow instability of supercritical circulating fluidized bed(CFB) boiler,a new numerical computational model considering the heat storage of the tube wall metal was presented in this *** lumped parameter method was proposed for wall temperature calculation and the single channel model was adopted for the analysis of flow *** on the time-domain method,a new numerical computational program suitable for the analysis of flow instability in the water wall of supercritical CFB boiler with annular furnace was *** verify the code,calculation results were respectively compared with data of commercial *** to the comparisons,the new code was proved to be reasonable and accurate for practical engineering application in analysis of flow *** on the new program,the flow instability of supercritical CFB boiler with annular furnace was simulated by time-domain *** 1.2 times heat load disturbance was applied on the loop,results showed that the inlet flow rate,outlet flow rate and wall temperature fluctuated with time eventually remained at constant values,suggesting that the hydrodynamic flow was *** results also showed that in the case of considering the heat storage,the flow in the water wall is easier to return to stable state than without considering heat storage.

关键词： supercritical CFB with annular furnace heat storage flow instability wall temperature numerical analysis

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：