检索结果-内蒙古大学图书馆

Renewable Energy 2025年 252卷

作者： Cui, Zhifei Bai, Yang Cao, Peiyu Huang, Diangui University of Shanghai for Science and Technology Shanghai200093 China Shanghai Key Laboratory of Power Energy in Multiphase Flow and Heat Transfer Shanghai200093 China

This study investigates the hydrodynamic and energy absorption characteristics of a two-dimensional flexible traveling wave plate in energy absorption mode, focusing on the impact of unsteady wall effects and their interaction with the wake vortex structure. Numerical simulations reveal that the wall effect significantly alters both the time-averaged and instantaneous force coefficients, with variations depending on the dimensionless wave speed(C) and wall distance(D). Specifically, the time-averaged transverse force coefficient decreases by 45.9 % at D = 0.2 and C = 0.4 compared to unbounded conditions, while the longitudinal force coefficient exhibits a complex trend, transitioning from a monotonic decrease to a decrease followed by an increase, influenced by wave speed. The wall effect also disrupts the symmetry of the instantaneous force coefficients, complicating the force curves. Furthermore, the wall increases the average differential pressure power, slightly enhancing energy absorption efficiency at D = 0.8–1.0, but reducing efficiency at D = 0.2–0.7. The wall also disturbs the wake vortex structure, causing premature dissipation of the positive vortex core and weakening energy harvesting near the wall. These findings highlight the wall's complex influence on hydrodynamic performance and energy absorption, offering insights for energy-harvesting device design near the wall. © 2025 Elsevier Ltd

关键词： Light absorption

X-Ray Computed Tomography (Xct) Study of Jetting in a Fluidized Bed: Effects of Two-Component Fluidization

学校读者我要写书评

暂无评论

SSRN 2024年

作者： Xiang, Zhong Chen, Xi Liu, Shuguang Heindel, Theodore J. Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy and Environment Southeast University Nanjing210096 China Institute of Science and Technology for Carbon Neutrality Southeast University Nanjing210096 China Center for Multiphase Flow Research and Education Department of Mechanical Engineering Iowa State University AmesIA50011 United States

Fluidization of non-spherical particles is commonly found in the biomass and solid waste processing industry, and the jetting characteristic above the aeration plate is critical to the fluidization performance of these particles. In this study, cylindrical particles are used as typical non-spherical particles and co-fluidized with small bed material particles. X-ray computed tomography (XCT) is used to reconstruct the 3D structure of the aeration plate region, allowing for the identification of individual aeration jets. The effects of jet velocity (Uj), cylindrical particle mass fraction (ω), cylindrical particle density (ρi), and the cylindrical particle sphericity () on jet shape and volume are investigated. The experimental results indicate that decreasing the cylindrical particle mass fraction (ω) and particle density (ρi) increases the jet length (L), maximum jet diameter (D), and maximum jet volume (V), but have little effect on the jet half angle (θ). The cylindrical particle density (ρi) is the most sensitive factor for jet shape, while the effect of cylinder particle sphericity () on jet shape is insignificant. A correlation of jet length (L) in a two-component fluidized bed with cylindrical particles and bed material is proposed based on all the experimental results. © 2024, The Authors. All rights reserved.

关键词： Fluidization

Numerical Simulation of Acoustic Propagation in Gas Ultrasonic flowmeter

学校读者我要写书评

暂无评论

SSRN 2022年

作者： Xiao, Yongqing Zhang, Meng Li, Dong Yang, Yueming Ma, Bingkun Qi, Jianhui School of Energy and Power Engineering Shandong University Jinan250061 China Beijing Key Laboratory of Multiphase Flow and Heat Transfer for Low Grade Energy Utilization North China Electric Power University Beijing102206 China Suzhou Research Institute Shandong University Suzhou215123 China Shandon Academy of Sciences China

Ultrasonic flowmeter has been widely used in chemical smelting, industrial production and other fields. Through the COMSOL Multiphysics software, the non-linear trajectory of the rays in the non-invasive and intrusive UFW is first simulated by the ray tracing method. Then, the transient ultrasonic propagation process is simulated to analyze the reasons for the error of ultrasonic propagation. Finally, the cause of the error of the transducer is analyzed by the sound pressure signal at the receiving end. It was found that it is precisely because of the high-speed flow that the ultrasonic propagation is distorted, which is manifested as the non-linear trajectory and downstream drift of the sound beam. The signal at the receiving end also fails to hit the correct position due to beam drift, resulting in sound pressure falling below the detected value. © 2022, The Authors. All rights reserved.

关键词： flow measurement

Bowl-Shaped Carbon Loaded Co9s8 Nanoparticles Connected by Carbon Nanotubes with Excellent Rate Performance for Sodium-Ion Batteries

学校读者我要写书评

暂无评论

SSRN 2022年

作者： Yang, Guorui Zhou, Ziyi Liu, Xiaofeng Zhang, Yue Wang, Silan Yan, Wei Ding, Shujiang School of Chemistry Engineering Research Center of Energy Storage Materials and Devices Ministry of Education "Four Joint Subjects One Union" School Enterprise Joint Research Center for Power Battery Recycling & Circulation Utilization Technology Xi’an Jiaotong University Xi’an710049 China Xi'an Key Laboratory of Solid Waste Recycling and Resource Recovery State Key Laboratory of Multiphase Flow in Power Engineering Department of Environmental Science and Engineering Xi'an Jiaotong University Xi'An710049 China

Sodium-ion batteries (SIBs) are expected to replace lithium-ion batteries in the energy storage sector owing to their low cost and abundant resources. However, developing suitable anode materials to meet the high energy density requirements of SIBs remains an ongoing challenge. Herein, we design a hollow nitrogen-doped bowl-like carbon decorated with Co9S8 nanoparticles linked by carbon nanotubes (HNBC@Co9S8@CNTs) as an anode material for SIBs. The HNBC@Co9S8@CNTs electrode exhibits impressive rate performance (280.9 mAh g-1 at 5 A g-1) and cycling stability (426.5 mAh g-1 after 500 cycles at high current density of 1 A g-1) due to the advantages of highly conductive three-dimensional (3D) interconnected structures. In addition, its pseudo-capacitance and sodium storage diffusion kinetics are analyzed in depth using Cyclic Voltammetry (CV) and galvanostatic intermittent titration technique (GITT). The results elucidate that the partially surface-induced capacitive sodium storage, highly conductive 3D interconnected structures, and fast reaction kinetics synergistically contribute to the high-rate performance. This work may provide new insights for the fabrication of various metal sulﬁde or sulﬁde composites with high sodium storage capacity. © 2022, The Authors. All rights reserved.

关键词： Sodium-ion batteries

Polarity switching from p- to n-type in a single thermoelectric donor-acceptor copolymer by p-type doping

学校读者我要写书评

暂无评论

Research Square

Research Square 2021年

作者： Wang, Jing Wang, Yizhuo Li, Qing Li, Zhanchao Xu, Liqing Li, Kuncai Wang, Hong Frontier Institute of Science and Technology Xi’an Jiaotong University Xi’an710054 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710054 China

The transport mechanism of organic materials is still far away from being well understood and controlled although conducting polymers have been discovered since 1977. It is rare to see conducting polyers possessing high bipolar (p- and n-type) electrical conductivities within a single bulk doped organic polymer without the assistant of gate voltage. Here, we report a novel approach to provide high performance n-type materials by p-type doping. More importantly, the bipolar electrical conductivities of the donor-acceptor conducting polymer are high, resulting high bipolar power factors among the solution-processable ambipolar D-A copolymers. A fully organic p-n junction is created in a planar film, exhibiting a high rectification ratio of 2 x 102 at ±5 V with a high current density of 3 A/cm2. Structural and spectroscopic tests have been performed to provide a fundamental understanding of the polarity switching mechanism. The results open the opportunity of making p- and n-type modules with a single conducting polymer for future modern organic electronics. © 2021, CC BY.

关键词： Conducting polymers

MgO and Au nanoparticle Co-modified g-C_(3)N_(4)photocatalysts for enhanced photoreduction of CO_(2)with H_(2)O

学校读者我要写书评

暂无评论

Chinese Journal of Catalysis 2021年第5期42卷 781-794页

作者： Naixu Li Meiyou Huang Jiancheng Zhou Maochang Liu Dengwei Jing School of Chemistry and Chemical Engineering Southeast UniversityNanjing 211189JiangsuChina International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049ShaanxiChina Jiangsu Key Laboratory for Biomass Energy and Material Institute of Chemical Industry of Forest ProductsChinese Academy of ForestryNanjing 210042JiangsuChina Suzhou Academy of Xi’an Jiaotong University Suzhou 215123JiangsuChina

The photoreduction of CO_(2)to achieve high-value-added hydrocarbons under simulated sunlight irradiation is advantageous,but *** this study,a series of MgO and Au nanoparticle-co-modified g-C_(3)N_(4)photocatalysts were synthesized and subsequently applied for the photocatalytic reduction of CO_(2)with H2O under simulated solar *** best photocatalytic performance was demonstrated by the Au and 3%MgO-co-modified g-C_(3)N_(4)photocatalysts with CO,CH_(4),CH3OH,and CH3CHO yields of 423.9,83.2,47.2,and 130.4μmol/g,respectively,in a 3-h *** investigated the effects of MgO and Au as cocatalysts on photocatalytic behaviors,*** characterizations and experimental results showed that the enhanced photocatalytic activity was due to the synergistic effect among the components of the ternary *** cocatalyst MgO can activate CO_(2)(adsorbed at the interface between the MgO and Au particles),and the Mg-N bonds formed in the MgO-CN nanosheets played an important role in the charge ***,the Au particles that were modified into MgO/g-C_(3)N_(4)can increase the absorption of visible light via the surface plasmon resonance effect and further reduce the activation energies of the photoreduction of CO_(2)using *** study provided an effective method for the modification of traditional primary photocatalysts with promising performance for photocatalytic CO_(2)reduction.

关键词： CO2 photoreduction MgO Au g-C3N4 Photocatalysis Synergistic effect Cocatalyst

Development of typical processes and key devices for direct air CO2 capture

学校读者我要写书评

暂无评论

Meitan Xuebao/Journal of the China Coal Society 2024年第10期49卷 4203-4221页

作者： Yu, Binpeng Tan, Lei Wang, Ding Wang, Limin Xiang, Xiaofeng Wang, Zhichao Jin, Zhonghua Yang, Bolun Wu, Zhiqiang School of Chemical Engineering and Technology Xi’an Jiaotong University Xi’an710049 China Shaanxi Province Energy and Chemical Process Intensification Key Laboratory Xi’an710049 China School of Engery and Powerl Engineering Xi’an Jiaotong University Xi’an710049 China State Key Laboratory of Multiphase Flow in Power Engineering Xi’an710049 China Shaanxi Engineering Research Center if Coal Fired Boiler Environmental Protection Xi’an710054 China

Conventional carbon capture and storage technologies and carbon capture, utilization and storage technologies mainly target CO2 emissions from fixed sources, while direct air capture CO2 (DAC) technology, as an emerging negative carbon emission technology, can capture CO2 emissions from distributed sources and further reduce the global atmospheric CO2 concentration. In this paper, the development process of DAC's typical liquid absorption process, solid adsorption process and the construction of relevant demonstration projects are introduced, the technical characteristics of emerging DAC processes are analyzed, and the key equipment schemes and future development trends of existing DAC processes are discussed. The DAC liquid absorption process has the characteristics of low cost of absorbent raw materials and high selectivity, which can realize a large-scale continuous capture, but high energy consumption in the regeneration process. The DAC solid adsorption process has the characteristics of modularity, low investment cost, and relatively low energy consumption in the regeneration process, but requires a regular replacement of adsorption materials and maintenance of adsorption equipment, which is suitable for small-scale DAC application scenarios. Two typical DAC process absorption/adsorption materials are reviewed. In the DAC electric oscillation adsorption process, CO2 is chemically captured in the solid electrode, and CO2 desorption is achieved by changing the polarity of the solid electrode with applied electric field. This process has a higher efficiency than that of the heat or pressure-based separation process. The CO2 in the air is selected through the DAC separation membrane to achieve an efficient carbon capture. The DAC process achieves the CO2 absorption and desorption through the change of humidity, which breaks through the high energy consumption limit of conventional variable temperature/pressure swing adsorption. The DAC bio-absorption process absor

关键词： Adsorption

Study on Heat and Mass Transfer Distance of Water-Film Evaporation in Limited Space Using Dual-Wavelength Digital Holographic Interference

学校读者我要写书评

暂无评论

SSRN 2022年

作者： Liu, Jing-Nan Zhang, Meng-Meng Zhang, Lin-Xin Di, Jiang-Lei Zhao, Jian-Lin Gao, Ming Sun, Yue-Dong Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering University of Shanghai for Science and Technology Shanghai200093 China MOE Key Laboratory of Material Physics and Chemistry under Extraordinary Conditions Shaanxi Key Laboratory of Optical Information Technology School of Physical Science and Technology Northwestern Polytechnical University Shaanxi Xi’an710129 China Advanced Institute of Photonics Technology School of Information Engineering Guangdong Provincial Key Laboratory of Information Photonics Technology Guangdong University of Technology Guangzhou51006 China

To study the heat and mass transfer between evaporating water film and air in limited space, the temperature and humidity distributions of air near the flowing water film was measured using dual-wavelength digital holographic interference (DHI). The holograms were recorded by CMOS with two different wavelengths of 532 nm and 671 nm. We derived the relationships between the phase changes reconstructed from the holograms and the air temperature and humidity changes based on the Edlen formulas. A experimental model was built to generate steady water film and demonstrate the heat and mass transfer in air countercurrent to the water film, which flows down on the copper plate. The model has two symmetrical tunnels isolated by a copper plate in the middle, allowing to compare the cases of heat mass transfer with and without evaporation. The relative measurement errors of temperature and humidity are less than x% and y%, respectively, by comparing the reconstructed results with the sensor measured values. Based on the measurement results, the concept, feature transfer distance (FTD), is proposed, which characterizes the intensity of heat and mass transfer. By analyzing FTD, the main influencing factors of heat and mass transfer were obtained. © 2022, The Authors. All rights reserved.

关键词： Evaporation

High loading cotton cellulose-based aerogel self-standing electrode for Li-S batteries

学校读者我要写书评

暂无评论

Science Bulletin 2020年第10期65卷 803-811,M0003页

作者： Heng Mao Limin Liu Lei Shi HuWu Jinxin Lang Ke Wang Tianxiang Zhu Yiyang Gao Zehui Sun Jing Zhao Guoxin Gao Dongyang Zhang Wei Yan Shujiang Ding Xi’an Key Laboratory of Sustainable Energy Materials Chemistry State Key Laboratory of Electrical Insulation and Power EquipmentDepartment of Applied ChemistrySchool of ScienceXi’an Jiaotong UniversityXi’an 710049China Department of Environmental Science and Engineering State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China

Lithium-sulfur(Li-S) batteries have attracted considerable attention due to their high energy density(2600 Wh kg-1). However, its commercialization is hindered seriously by the low loading and utilization rate of sulfur cathodes. Herein, we designed the cellulose-based graphene carbon composite aerogel(CCA) self-standing electrode to enhance the performance of Li-S batteries. The CCA contributes to the mass loading and utilization efficiency of sulfur, because of its unique physical structure: low density(0.018 g cm-3), large specific surface area(657.85 m2 g-1), high porosity(96%), and remarkable electrolyte adsorption(42.25 times). Compared to Al(about 49%), the CCA displayed excellent sulfur use efficiency(86%) and could reach to high area capacity of 8.60 mAh cm-2 with 9.11 mgS loading. Meanwhile,the CCA exhibits the excellent potential for pulse sensing applications due to its flexibility and superior sensitivity to electrical response signals.

关键词： Cellulose-based graphene aerogel Self-standing electrode High sulfur loading Lithium-sulfur battery Pulse sensing

Customizable Ligand Exchange for Tailored Surface Property of Noble Metal Nanocrystals

学校读者我要写书评

暂无评论

Research 2020年第1期2020卷 292-303页

作者： Qikui Fan Hao Yang Juan Ge Shumeng Zhang Zhaojun Liu Bo Lei Tao Cheng Youyong Li Yadong Yin Chuanbo Gao Frontier Institute of Science and Technology State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’anShaanxi 710054China Institute of Functional Nano&Soft Materials(FUNSOM) Jiangsu Key Laboratory for Carbon-Based Functional Materials&DevicesJoint International Research Laboratory of Carbon-Based Functional Materials and DevicesSoochow UniversitySuzhouJiangsu 215123China Department of Chemistry University of CaliforniaRiversideCalifornia 92521USA

It is highly desirable,while still challenging,to obtain noble metal nanocrystals with custom capping ligands,because their colloidal synthesis relies on specific capping ligands for the shape control while conventional ligand exchange processes suffer from“the strong replaces the weak”limitation,which greatly hinders their ***,we report a general and effective ligand exchange approach that can replace the native capping ligands of noble metal nanocrystals with virtually any type of ligands,producing flexibly tailored surface *** key is to use diethylamine with conveniently switchable binding affinity to the metal surface as an intermediate *** a strong ligand,it in its original form can effectively remove the native ligands;while protonated,it loses its binding affinity and facilitates the adsorption of new ligands,especially weak ones,onto the metal *** this means,the irreversible order in the conventional ligand exchange processes could be *** efficacy of the strategy is demonstrated by mutual exchange of the capping ligands among cetyltrimethylammonium,citrate,polyvinylpyrrolidone,and *** novel strategy significantly expands our ability to manipulate the surface property of noble metal nanocrystals and extends their applicability to a wide range of fields,particularly biomedical applications.

关键词： properties replace mutual