检索结果-内蒙古大学图书馆

SSRN 2024年

作者： Zhou, Jian Tao, Ye Liu, Weiyu Sun, Tie Wu, Fangyu Shi, Changrui Ren, Yukun State Key Laboratory of Robotics and Systems Harbin Institute of Technology Harbin150001 China School of Electronics and Control Engineering Chang'an University Xi’an710064 China

The lab-on-a-chip system can simultaneously complete the preparation, reaction, separation, and detection of samples on a centi-scale platform by manipulating trace fluids. Traveling-wave electroosmosis (TWEO) technology, with the merit of electric signal-based flexible control over the fluid behavior, can achieve precise driving of fluids, which is an important requirement of the lab-on-a-chip system. However, the peripheral power equipment such as function generator required for TWEO limits the application in some occasions lacking power supply facilities, due to its large size and high cost. In this paper, we developed a brand-new portable and integrated TWEO microfluidic pumping system, wherein a front-end module of triboelectric nanogenerator (TENG) is in serial connection with the back-end microfluidic pumping chip, which greatly improves portability and reduces costs. The TENG can output a stable four consecutively 90°-phase-shifted alternating current voltage signals in a continuous rotational motion originated by its novel electrode structure. And the four-phase traveling potential waves are applied to four sets of electrode strips alternately distributed in the microchannel and thereby induce nonlinear electroosmotic slip on the electrode surface. Compared with traditional mechanical pumps, this system achieves stable pumping of electrolyte in the microchannel, but also realizes the almost instantaneous start, stop, and directional switching in response to a turn on, turn off, and turn in reverse of TENG, respectively. Finally, this system is integrated into a droplet microfluidic chip for the efficient fabrication of single emulsion droplets. This study presents a promising solution for the miniaturization, integration, and commercialization of lab-on-a-chip system. © 2024, The Authors. All rights reserved.

关键词： Lab-on-a-chip

来源：评论

学校读者我要写书评

暂无评论

All-weather,natural silent speech recognition via machine-learning-assisted tattoo-like electronics

引用

npj Flexible Electronics 2021年第1期5卷 183-191页

作者： Youhua Wang Tianyi Tang Yin Xu Yunzhao Bai Lang Yin Guang Li Hongmiao Zhang Huicong Liu YongAn Huang State Key Laboratory of Digital Manufacturing Equipment and Technology Huazhong University of Science and TechnologyWuhanChina Flexible Electronics Research Center Huazhong University of Science and TechnologyWuhanChina School of Mechanical and Electric Engineering Jiangsu Provincial Key Laboratory of Advanced RoboticsSoochow UniversitySuzhouChina State Key Laboratory of Industrial Control Technologyg Institute of Cyber Systems and ControlZhejiang UniversityHangzhouChina

The internal availability of silent speech serves as a translator for people with aphasia and keeps human–machine/human interactions working under various *** paper develops a silent speech strategy to achieve all-weather,natural *** strategy requires few usage specialized skills like sign language but accurately transfers high-capacity information in complicated and changeable daily *** the strategy,the tattoo-like electronics imperceptibly attached on facial skin record high-quality bio-data of various silent speech,and the machine-learning algorithm deployed on the cloud recognizes accurately the silent speech and reduces the weight of the wireless acquisition module.A series of experiments show that the silent speech recognition system(SSRS)can enduringly comply with large deformation(~45%)of faces by virtue of the electricitypreferred tattoo-like electrodes and recognize up to 110 words covering daily vocabularies with a high average accuracy of 92.64%simply by use of small-sample machine *** successfully apply the SSRS to 1-day routine life,including daily greeting,running,dining,manipulating industrial robots in deafening noise,and expressing in darkness,which shows great promotion in real-world applications.

关键词： translator weather silent

来源：评论

学校读者我要写书评

暂无评论

Prescribed Time Performance Security Tracking control of Quadrotors Under Unknown Attacks

Prescribed Time Performance Security Tracking Control of Qua...

引用

第43届中国控制会议

作者： Liping Wang Hailong Pei Key Laboratory of Autonomous Systems and Networked Control Ministry of EducationGuangdong Engineering Technology Research Center of Unmanned Aerial Vehicle SystemsSouth China University of Technology

ISBN: (数字)9789887581581

ISBN: (纸本)9798350366907

This paper investigates the prescribed time performance security tracking control problem of quadrotors under unknown attacks. First,by using a prescribed time performance function and coordinate transformation,the tracking error can remain within a given region in a prescribed time. In the backstepping design process,a first-order sliding mode differentiator is given to surmount the problem of "the explosion of complexity",and the Nussbaum function is developed to deal with the unknown attacks problem. A prescribed time performance security attitude tracking control method is designed to prove the boundedness of the closed-loop signals. Finally,the simulation results are enumerated to state the superiority and effectiveness of the designed control method.

关键词： quadrotor unmanned aerial vehicles unknown deception attack backstepping Nussbaum function

来源：评论

学校读者我要写书评

暂无评论

NA-CPG: A robust and stable rhythm generator for robot motion control

引用

Biomimetic Intelligence & robotics 2022年第4期2卷 30-38页

作者： Ru Tong Changlin Qiu Zhengxing Wu Jian Wang Min Tan Junzhi Yu State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100049China Department of Advanced Manufacturing and Robotics College of EngineeringPeking UniversityBeijing 100871China

Central pattern generators(CPGs)have been widely applied in robot motion control for the spontaneous output of coherent periodic ***,the underlying CPG network exhibits good convergence performance only within a certain range of parameter spaces,and the coupling of oscillators affects the network output accuracy in complex topological ***,CPGs may diverge when parameters change drastically,and the divergence is irreversible,which is catastrophic for the control of robot ***,normalized asymmetric CPGs(NA-CPGs)that normalize the amplitude parameters of Hopf-based CPGs and add a constraint function and a frequency regulation mechanism are ***-CPGs can realize parameter decoupling,precise amplitude output,and stable and rapid convergence,as well as asymmetric output ***,it can effectively cope with large parameter changes to avoid network oscillations and *** optimize the parameters of the NA-CPG model,a reinforcement-learning-based online optimization method is further ***,a biomimetic robotic fish is illustrated to realize the whole optimization *** demonstrated that the designed NA-CPGs exhibit stable,secure,and accurate network outputs,and the proposed optimization method effectively improves the swimming speed and reduces the lateral swing of the multijoint robotic fish by 6.7%and 41.7%,*** proposed approach provides a significant improvement in CPG research and can be widely employed in the field of robot motion control.

关键词： Normalized asymmetric CPGs Rhythm generator Motion control Robotic fish

来源：评论

学校读者我要写书评

暂无评论

Joint Algorithm of Message Fragmentation and No-Wait Scheduling for Time-Sensitive Networks

引用

IEEE/CAA Journal of Automatica Sinica 2021年第2期8卷 478-490页

作者： Xi Jin Changqing Xia Nan Guan Peng Zeng Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110016 Shenyang Institute of Automation Chinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China Department of Computing Hong Kong Polytechnic UniversityHong KongChina

Time-sensitive networks(TSNs)support not only traditional best-effort communications but also deterministic communications,which send each packet at a deterministic time so that the data transmissions of networked control systems can be precisely scheduled to guarantee hard real-time ***-wait scheduling is suitable for such TSNs and generates the schedules of deterministic communications with the minimal network resources so that all of the remaining resources can be used to improve the throughput of best-effort ***,due to inappropriate message fragmentation,the realtime performance of no-wait scheduling algorithms is ***,in this paper,joint algorithms of message fragmentation and no-wait scheduling are ***,a specification for the joint problem based on optimization modulo theories is proposed so that off-the-shelf solvers can be used to find optimal ***,to improve the scalability of our algorithm,the worst-case delay of messages is analyzed,and then,based on the analysis,a heuristic algorithm is proposed to construct low-delay ***,we conduct extensive test cases to evaluate our proposed *** evaluation results indicate that,compared to existing algorithms,the proposed joint algorithm improves schedulability by up to 50%.

关键词： Message fragmentation networked control system real-time scheduling time sensitive network

来源：评论

学校读者我要写书评

暂无评论

Tactile-Based Object Pose Estimation Employing Extended Kalman Filter 8

Tactile-Based Object Pose Estimation Employing Extended Kalm...

引用

8th IEEE International Conference on Advanced robotics and Mechatronics, ICARM 2023

作者： Lin, Qiguang Yan, Chaojie Li, Qiang Ling, Yonggen Zheng, Yu Lee, Wangwei Wan, Zhaoliang Huang, Bidan Liu, Xiaofeng College of IoT Engineering Hohai University Jiangsu Key Laboratory of Special Robotic Technology Jiangsu Changzhou213022 China Zhejiang University Institute of Cyber-System and Control State Key Laboratory of Industrial Control and Technology Hangzhou China Bielefeld33619 Germany Tencent Robotics X Shenzhen China School of Computer Science and Engineering Sun Yat-sen University Guangzhou China

ISBN: (纸本)9798350300178

In this paper, we present a new approach to estimate the pose of an object being manipulated by a multi-fingered robotic hand. The method utilizes advanced tactile sensors with high spatial resolution to optimize the estimation of the object's pose using an Extended Kalman Filter (EKF) based approach. We defined and derived the state and measurement equations, as well as evaluated the estimation accuracy in grasping tasks. The approach is able to effectively account for the pose transition caused by tactile pushing, and the mapping from the object's pose to the contact position and normal direction as measured by the tactile sensor. The method was evaluated in multiple grasping experiments in simulation scenarios. Results show that the estimation can converge towards the ground truth in a relatively short period of time, with displacement and rotation errors remaining within acceptable levels. This new method has the potential to improve the accuracy and reliability of robotic grasping and manipulation tasks. © 2023 IEEE.

关键词： Extended Kalman filters

来源：评论

学校读者我要写书评

暂无评论

AI Enabled Automatic Mobile Robot Intelligent Navigation in Construction with Obstacle Awareness

引用

IEEE Transactions on Automation Science and Engineering 2025年

作者： Zhang, Yinlong Liu, Yuanhao Cui, Yunge Zeng, Ziming Liang, Wei Chinese Academy of Sciences State Key Laboratory of Robotics Shenyang Institute of Automation Shenyang110016 China Chinese Academy of Sciences Key Laboratory of Networked Control Systems Shenyang110016 China University of Chinese Academy of Sciences Beijing101408 China Zeekr Group Zeekr Intelligent Driving Department Shanghai110078 China Shenzhen Polytechnic University School of Automotive and Transportation Engineering Shenzhen518055 China

In the construction industry, the integration of artificial intelligence (AI) and robotics has led to significant advancements in automating various tasks. One critical aspect is the intelligent navigation of automatic mobile robot (AMR) within construction sites, where dynamic environments pose challenges such as inaccurate robot state estimation, irregular and textureless obstacle detection. To solve these issues, this paper designs an AI enabled obstacle-aware AMR intelligent navigation approach while ensuring robot safety and efficiency. Specifically, the robot is equipped with the complementary RGB camera, inertial measurement unit (IMU) and wheel encoder to estimate the states (i.e., positions, orientations and velocities), which have been tightly fused in the optimization framework. Furthermore, the RGB-Depth images are jointly fed into the AI model. It combines of Mask-RCNN and multi-scale attention network, to detect and segment the obstacles, and estimate the corresponding relative depth. It should be noted that the system incorporates obstacle awareness mechanisms to dynamically switch the robot's velocities in response to obstacles in the environment, ensuring smooth and collision-free movement. Experimental results demonstrate the effectiveness and robustness of the proposed AI-enabled navigation system in real-world construction scenarios, showcasing its potential to enhance productivity and safety in construction automation. © 2004-2012 IEEE.

关键词： Construction industry

来源：评论

学校读者我要写书评

暂无评论

Lidar-Inertial and Downward Vision Based Mobile Robot SLAM in Digital Workshops

Lidar-Inertial and Downward Vision Based Mobile Robot SLAM i...

引用

Data Driven control and Learning systems (DDCLS)

作者： Yanchao Zhang Hao Geng Bin Liu Yinlong Zhang Xudong Yuan Sichao Zhang School of Information Science and Engineering Shenyang University of Technology Shenyang China Guangzhou Institute of Industrial Intelligence Guangzhou China State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (数字)9798350361674

ISBN: (纸本)9798350361681

In order to solve the problems of long-term cumulative error and the absence of absolute pose in the existing Lidar-Inertial Measurement Unit (IMU) fusion methods for Automated Guided Vehicle (AGV) Simultaneous Localization and Mapping (SLAM), we propose a new SLAM method for mobile robot, integrating Lidar, IMU, and a downward vision camera. Firstly, we tightly couple Lidar-IMU and downward vision camera using a multimodal fusion framework. Downward visual measurements are integrated as QR factors into the factor graph, providing absolute pose information to correct cumulative error in the Lidar-IMU system and enable the joint pose estimation of the AGV. Secondly, an enhanced Iterative Closest Point (ICP) point cloud matching algorithm has been developed to correct the incorrect pose. This approach achieves Scan-to-Map alignment by employing a coarse-to-fine matching strategy, thereby enhancing the accuracy of point cloud alignment. Finally, the extended Kalman filter is used to optimize the Lidar pose drift, as well as the Lidar mapping effectively by using the Lidar-IMU as the measurements and the downward visual measurements as the updates. The algorithm has been extensively evaluated on the developed AGV experimental platform. The experimental results show that the position error is less than 0.02 meters and the orientation error is less than 1°, which solves the problems of long-term error accumulation and the lack of absolute pose information for AGV navigation.

关键词： Point cloud compression Visualization Laser radar Simultaneous localization and mapping Conferences Robot vision systems Measurement uncertainty

来源：评论

学校读者我要写书评

暂无评论

Extended state Observer Based Fault-Tolerant Predictive control for a Four-Mecanum Wheels Mobile Robot 14

Extended State Observer Based Fault-Tolerant Predictive Cont...

引用

14th IEEE International Conference on Cyber Technology in Automation, control, and Intelligent systems, CYBER 2024

作者： Yang, Binghao Wang, Dongliang Wen, Ziling Wei, Wu Li, Wenji Fan, Zhun Shantou University Key Lab of Digital Signal and Image Processing of Guangdong Province Guangdong 515063 China Shantou University School of Department of Electronic and Information Engineering Guangdong 515063 China Key Laboratory of Autonomous Systems and Networked Control Ministry of Education Guangdong Guangzhou510640 China School of Automation Science and Engineering South China University of Technology Guangdong Guangzhou510641 China

ISBN: (纸本)9798331506056

The application of unmanned vehicles in industrial cargo transportation is becoming increasingly widespread, particularly playing a significant role in transporting heavy-duty goods. However, when performing such tasks, whether in single-vehicle transportation or multi-vehicle collaborative transportation, the occurrence of wheel failures can potentially lead to serious safety accidents. Therefore, this paper proposes a fault-tolerant control scheme, establishing a kinematic model considering disturbances and failures, and adopts model predictive control for trajectory tracking. Additionally, an extended state observer is introduced to observe system states and counteract disturbances. To address potential failure issues, a controller reconstruction strategy is proposed. Finally, the effectiveness and superiority of the controller is validated through numerical simulation and comparative experiment. © 2024 IEEE.

关键词： Mobile robots

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of High Precision Clock Synchronization System Based on RT1064

Design and Implementation of High Precision Clock Synchroniz...

引用

International Conference on Communications, Information System and Computer Engineering (CISCE)

作者： Mingxu Gang Bingjun Yan Bo Hu Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (数字)9798350353174

ISBN: (纸本)9798350353181

To realize the high-precision clock synchronization of various types of control equipment in the industrial process control network, a high-precision clock synchronizing system is designed and implemented. The system uses RT1064 microprocessor as the core, combined with ieee1588v2 high-accuracy clock synchronization protocol, and uses the MAC kernel integrated in rt1064 to support hardware timestamp function to achieve high-precision time synchronization between devices; Finally, the test verification platform is built to test and verify the accuracy. The test results show that the clock synchronization accuracy is within ± 400ns after the system runs stably, which meets the design requirements.

关键词： Accuracy Protocols Microprocessors Process control Media Access control Hardware Software

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：