检索结果-内蒙古大学图书馆

Defects in the grain interiors of 3 mol%yttria-stabilized tetragonal zirconia polycrystal ceramics with 0.25 wt%alumina

引用

Journal of advanced Ceramics 2024年第4期13卷 469-477页

作者： Yan Xiong Lian Luo Yao Cheng Zhi Liu Qi Liu Weimin Wang Wei Ji School of Materials&Chemical Engineering Hubei Province Key Laboratory of Green Materials for Light IndustryHubei University of TechnologyWuhan 430068China Fujian Institute of Research on the Structure of Mater Chinese Academy of SciencesFuzhou 350002China Jiangxi Provincial Engineering Research Center for Multifunction Zirconia Materials Jiangxi Size Materials Co.Ltd.Jiujiang 332500China State Key Laboratory of Advance Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China

The presence of high-density defects is rarely observed in bulk 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TZP)ceramics obtained through conventional pressureless *** the present work,fine-grained dense 147 nm 3Y-TZP ceramics were prepared by pressureless sintering of commercial 0.25 wt%alumina-doped zirconia powders at 1300℃.A novel discovery was reported in which large amounts of defects were present in the grain interiors of the *** phenomenon was further examined using three types of powder samples,and the reasons for defect formation were investigated by microstructural characterization using high-resolution transmission electron microscopy(HRTEM)analysis and Rietveld *** results confirmed the essential dependence of the defect formation on the alumina *** authors attributed the defect formation to the significant difference in ionic radii of the solvent and solute during the dissolution of alumina into the zirconia *** sintering kinetics were proposed to be enhanced by the presence of substantial defects,which consequently favored the low-temperature sintering of the alumina-doped zirconia ceramics.

关键词： 3 mol%yttria-stabilized tetragonal zirconia polycrystal(3Y-TzP)ceramics alumina addition microstructure defect

来源：评论

学校读者我要写书评

暂无评论

Design and high-strength origin of novel (CoFeNi)_(80)Ti_(5)V_(15) medium entropy alloy with “fcc + L1_(2) ”structure

引用

Journal of materials Science & technology 2023年第18期149卷 154-160页

作者： Lei Wang Xinyuan Wu Yuan Wu Gang Liu Zhenhua Han Yunpeng Zhang Yanning Su Shengfeng Kang Jun Shen Guojun Zhang School of Materials Science and Engineering Xi’an University of TechnologyXi’an 710048China State Key Laboratory for Advanced Metals and Materials University of Science and Technology BeijingBeijing 100083China State Key Laboratory of Solidification Processing Northwestern Polytechnical UniversityXi’an 710072China

*** The multi-component high entropy alloys(HEAs)or medium entropy alloys(MEAs)attract reseachers’extensive attention,in particular,the single-face center cubic(fcc)HEAs or MEAs due to their some advantages,such as excellent ductility[1,2],good corrosion resistance[3]and high radiation tolerance[4].However,their strength is commonly insufficient for engineering ***,many investigations are ongoing to improve their strength by traditional strengthening mechanisms,like fine-grained strengthening[5,6],solid strengthening[6-8],strain strengthening[9],polyphase strengthening[10-12],and precipitation strength-ening[13-15].Among these strengthening mechanisms,the co-herent L1_(2)-type nanoparticles precipitation strengthening has been proven to be a very effective way to improve their strength[13-15].

关键词： strengthening strength alloy

来源：评论

学校读者我要写书评

暂无评论

TiO_(2)/In_(2)S_(3)S-scheme photocatalyst with enhanced H_(2)O_(2)-production activity

引用

Nano Research 2023年第4期16卷 4506-4514页

作者： Yi Yang Bei Cheng Jiaguo Yu Linxi Wang Wingkei Ho State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Laboratory of Solar Fuel Faculty of Materials Science and ChemistryChina University of Geosciences388 Lumo RoadWuhan 430074China Department of Science and Environmental Studies The Education University of Hong KongTai PoHong Kong 999077China

Photocatalytic production of hydrogen peroxide(H_(2)O_(2))is an ideal pathway for obtaining solar ***,an S-scheme heterojunction is constructed in hybrid TiO_(2)/In_(2)S_(3)photocatalyst,which greatly promotes the separation of photogenerated carriers to foster efficient H_(2)O_(2)*** composite photocatalysts show a high H_(2)O_(2)yield of 376μmol/(L·h).The mechanism of charge transfer and separation within the S-scheme heterojunction is well studied by computational methods and *** functional theory and in-situ irradiated X-ray photoelectron spectroscopy results reveal distinct features of the S-scheme heterojunction in the TiO_(2)/In_(2)S_(3)hybrids and demonstrate charge transfer *** density functional theory calculation and electron paramagnetic resonance results suggest that O_(2)reduction to H_(2)O_(2)follows stepwise one-electron ***_(2)S_(3)shows a much stronger interaction with O_(2)than TiO_(2)as well as a higher reduction ability,serving as the active sites for H_(2)O_(2)*** work provides a novel design of S-scheme photocatalyst with high H_(2)O_(2)evolution efficiency and mechanistically demonstrates the improved separation of charge carriers.

关键词： step-scheme heterojunction photocatalytic H_(2)O_(2)production TiO_(2)/In_(2)S_(3)nanofibres

来源：评论

学校读者我要写书评

暂无评论

Defect engineering in molybdenum-based electrode materials for energy storage

引用

eScience 2022年第3期2卷 278-294页

作者： Weixiao Wang Fangyu Xiong Shaohua Zhu Jinghui Chen Jun Xie Qinyou An State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan430070China State Key Laboratory of Silicate Materials for Architectures Wuhan University of TechnologyWuhan430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Foshan528200China

Molybdenum-based materials have stepped into the spotlight as promising electrodes for energy storage systems due to their abundant valence states,low cost,and high theoretical ***,the performance of conventional molybdenum-based electrode materials has been limited by slow diffusion dynamics and deficient *** defect engineering to molybdenum-based electrode materials is a viable method for overcoming these intrinsic limitations to realize superior electrochemical performance for energy ***,we systematically review recent progress in defect engineering for molybdenum-based electrode materials,including vacancy modulation,doping engineering,topochemical substitution,and *** particular,the essential optimization mechanisms of defect engineering in molybdenum-based electrode materials are pre-sented:accelerating ion diffusion,enhancing electron transfer,adjusting potential,and maintaining structural *** also discuss the existing challenges and future objectives for defect engineering in molybdenum-based electrode materials to realize high-energy and high-power energy storage devices.

关键词： Energy storage Molybdenum-based electrode materials Defect engineering

来源：评论

学校读者我要写书评

暂无评论

A comprehensive review on Bi_(2)Te_(3)-based thin films: Thermoelectrics and beyond

引用

Interdisciplinary materials 2022年第1期1卷 88-115页

作者： Xinfeng Tang Ziwei Li Wei Liu ingjie Zhang Ctirad Uher State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhanChina Department of Physics University of MichiganAnn ArborMichiganUSA

Bi_(2)Te_(3)-based materials are not only the most important and widely used room temperature thermoelectric(TE)materials but are also canonical examples of topological insulators in which the topological surface states are protected by the time-reversal ***-performance thin films based on Bi_(2)Te_(3)- have attracted worldwide attention during the past two decades due primarily to their outstanding TE performance as highly efficient TE coolers and as miniature and flexible TE power generators for a variety of electronic ***,intriguing topological phenomena,such as the quantum anomalous Hall effect and topological superconductivity discovered in Bi_(2)Te_(3)-based thin films and heterostructures,have shaped research directions in the field of condensed matter *** Bi_(2)Te_(3)-based films and heterostructures,delicate control of the carrier transport,film composition,and microstructure are prerequisites for successful device operations as well as for experimental verification of exotic topological *** review summarizes the recent progress made in atomic defect engineering,carrier tuning,and band engineering down to a nanoscale regime and how it relates to the growth and fabrication of high-quality Bi_(2)Te_(3)-based *** review also briefly discusses the physical insight into the exciting field of topological phenomena that were so dramatically realized in Bi_(2)Te_(3)-and Bi_(2)Se_(3)‐based *** is expected that Bi_(2)Te_(3)-based thin films and heterostructures will play an ever more prominent role as flexible TE devices collecting and converting low-level(body)heat into electricity for numerous electronic *** is also likely that such films will continue to be a remarkable platform for the realization of novel topological phenomena.

关键词： Bi_(2)Te_(3)-based thin films and heterostructures device applications thermoelectric topological phenomena

来源：评论

学校读者我要写书评

暂无评论

In-situ selective surface engineering of graphene micro-supercapacitor chips

引用

Nano Research 2022年第2期15卷 1492-1499页

作者： Yiming Chen Minghao Guo Lin Xu Yuyang Cai Xiaocong Tian Xiaobin Liao Zhaoyang Wang Jiashen Meng Xufeng Hong Liqiang Mai State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China Foshan Xianhu Laboratory of the Advanced Energy Science and Technology Guangdong Laboratory Xianhu Hydrogen ValleyFoshan 528200China Faculty of Materials Science&Chemistry China University of GeosciencesWuhan 430074China

Surface modification of graphene oxide(GO)is a powerful strategy to develop its energy density for electrochemical energy ***,pre-modified GO always exhibits unsatisfactory hydrophilia and its ink-relevant utilization is extremely *** GO ink is widely utilized in fabricating micro energy storage devices via extrusion-based 3D-printing,simultaneously obtaining satisfactory hydrophilia and high energy density still remains a *** this work,an in-situ surface engineering strategy was employed to enhance the performance of GO micro-supercapacitor *** dimensionally printed GO micro-supercapacitor chips were treated with pyrrole monomer to achieve selective and spontaneous anchoring of polypyrrole on the microelectrodes without affecting interspaces between the finger *** interface-reinforced graphene scaffolds were edge-welded and exhibited a considerably improved specific capacitance,from 13.6 to 128.4 mF·cm^(-2).These results are expected to provide a new method for improving the performance of micro-supercapacitors derived from GO inks and further strengthen the practicability of 3D printing techniques in fabricating energy storage devices.

关键词： 3D-printing in-situ modification selective surface engineering edge-welded graphene micro-supercapacitors

来源：评论

学校读者我要写书评

暂无评论

High micropore-utilization carbon aerogel with controlled nanostructures via adjusting aggregation state of polyacrylonitrile for energy storage systems

引用

SusMat 2024年第4期4卷 27-38页

作者： Yuanyou Peng Yihan Fu Meimei Yu Lei Zhao Huanzhong Zeng Shengtao Niu Jie Zhang Junlong Chen Guang Liu Youzhi Wu Fen Ran State Key Laboratory of Advanced Processing and Recycling of Non-Ferrous Metals Department of Polymeric Materials EngineeringSchool of Material Science and EngineeringLanzhou University of TechnologyLanzhouChina

Designing and optimizing the pore structure of porous carbon electrodes is essen-tial for diverse energy storage *** this study,an innovative approach spray phase-inversion strategy was developed for the rapid and efficient fabri-cation of controlled porous carbon ***,the aggregation structure of polyacrylonitrile is controlled by adjusting the Hansen’s solubility parameter,thereby regulating the electrode material ***,the theoretical analysis of the spray phase-inversion process revealed that this regulation pro-cess is jointly regulated by solvent hydrodynamic diameter and phase-inversion *** optimization,a novel porous carbon material was obtained that exhibited excellent performance as an electrode *** utilized in supercapacitors for energy storage,it demonstrated a high specific capacitance of 373.1 F g^(-1) in a 6 M KOH electrolyte ***,it has been observed that the preparation strategy for porous electrodes offers notable advan-tages in terms of excellent designability,broad universality,simplicity,and high efficiency,thereby holding promise for large-scale fabrication of diverse porous electrode materials and various types of electrodes for diverse energy storage applications.

关键词： aggregation structure electrode materials phase inversion porous carbon supercapacitors

来源：评论

学校读者我要写书评

暂无评论

High-efficiently doping nitrogen in kapok fiber-derived hard carbon used as anode materials for boosting rate performance of sodium-ion batteries

引用

Journal of Energy Chemistry 2024年第9期96卷 472-482页

作者： Tianyun Zhang Tian Zhang Fujuan Wang Fen Ran School of Mechanical and Electronical Engineering Lanzhou University of TechnologyLanzhou 730050GansuChina State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals School of Materials Science and EngineeringLanzhou University of TechnologyLanzhou 730500GansuChina

The engineering of plant-based precursor for nitrogen doping has become one of the most promising strategies to enhance rate capability of hard carbon materials for sodium-ion batteries;however,the poor rate performance is mainly caused by lack of pyridine nitrogen,which often tends to escape because of high temperature in preparation process of hard *** this paper,a high-rate kapok fiber-derived hard carbon is fabricated by cross-linking carboxyl group in 2,6-pyridinedicarboxylic acid with the exposed hydroxyl group on alkalized kapok with assistance of zinc ***,a high nitrogen doping content of 4.24%is achieved,most of which are pyridine nitrogen;this is crucial for improving the defect sites and electronic conductivity of hard *** optimized carbon with feature of high nitrogen content,abundant functional groups,degree of disorder,and large layer spacing exhibits high capacity of 401.7 mAh g^(−1)at a current density of 0.05 A g^(−1),and more importantly,good rate performance,for example,even at the current density of 2 A g^(−1),a specific capacity of 159.5 mAh g^(−1)can be *** findings make plant-based hard carbon a promising candidate for commercial application of sodium-ion batteries,achieving high-rate performance with the enhanced pre-cross-linking interaction between plant precursors and dopants to optimize aromatization process by auxiliary pyrolysis.

关键词： Kapok fiber Hard carbon Electrode materials Rate performance Sodium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Enabling a stable and dendrite-suppressed Zn anode via facile surface roughness engineering

引用

Journal of materials Science & technology 2022年第7期102卷 272-277页

作者： Jinghao Li Kehan Le Wei Wei State Key Laboratory of Advanced Technology for Materials Synthesis and Processing Wuhan University of TechnologyWuhan 430070China International School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China School of Materials Science and Engineering Wuhan University of TechnologyWuhan 430070China

The safety and cycle lifespan of zinc metal-based aqueous batteries are greatly restricted by zinc *** poor cycling performance of zinc metal anode is often considered to be impacted by the dendrite growth,surface passivation,zinc metal corrosion and hydrogen evolution reaction,while surface roughness is a matter that has often been ignored in past ***,a roughness gradient is constructed on the zinc anode surface by a simple grinding and pasting *** has been found the modified zinc anodes with lower surface roughness exhibit the smaller zinc deposition overpotential and longer cycle ***,in situ optical microscopy photographs indicate that the zinc anode with an optimized roughness enables more uniform distribution of zinc precipitation and corrosion sites,which will facilitate a stable cycling performance of aqueous zinc ion *** Zn anode dendrite-suppressing mechanism via surface roughness engineering was revealed through finite element computational *** results emphasize the effectiveness of roughness engineering for tuning the surface physics of Zn anode and provide a facile strategy to develop better and safer aqueous zinc ion batteries.

关键词： Surface roughness Zn metal anode Surface engineering Aqueous zinc-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Preparation and Thermal Stability of AlMoON Based Solar Selective Absorption Coating

引用

Journal of Wuhan University of technology(materials Science) 2024年第4期39卷 854-862页

作者：闵捷 YUAN Wenxu CHEN Yufei LAN Yapeng YAN Mengdi LIU Hanze CHENG Xudong 代路 Hubei Provincial Key Laboratory of Green Materials for Light Industry Hubei University of TechnologyWuhan 430068China Col-laborative Innovation Center of Green Light-weight Materials and Processing Hubei University of TechnologyWuhan 430068China School of Materials and Chemical Engineering Hubei University of TechnologyWuhan 430068China School of Industrial Design Hu-bei University of TechnologyWuhan 430068China State Key Laboratory of Advanced Technology for Materials Synthesis and Process-ing Wuhan University of TechnologyWuhan 430070China Science and Technology on Thermal Energy and Power Laboratory Wuhan Second Ship Design&Research InstituteWuhan 430205China

AlMoON based solar selective absorption coatings were deposited on stainless steel substrate by magnetron *** coatings included infrared reflection layer Mo,absorption layer AlMoN,absorption layer AlMoON and antireflection layer AlMoO from bottom to *** surface of the deposited coatings is flat without obvious *** absorptivity and emissivity are 0.896 and 0.09,respectively,and the quality factor is *** heat treatment at 500℃-36 h,the surface roughness of the coating increases,a small number of cracks and other defects appear,and the broken part is still attached to the coating surface.A certain degree of element diffusion occurs in the coatings,resulting in the decline of the optical properties of the *** absorptivity and emissivity are 0.883 and 0.131,respectively,the quality factor is 7.06,and the PC value is *** coatings do not fail under this condition and have certain thermal stability.

关键词： AlMoON coating preparation thermal stability

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：