检索结果-内蒙古大学图书馆

Particle convective heat transfer near the wall in a supercritical water fluidized bed by single particle model coupled with CFD-DEM

引用

Particuology 2023年第2期73卷 47-58页

作者： Tianning Zhang Zhen Wan Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering(SKLMFPE) Xi'an Jiaotong UniversityXi'an710049ShaanxiChina Xi'an Electronic Engineering Research Institute Xi'an710100ShaanxiChina

Supercritical water fluidized bed(SCWFB)is a promising reactor to gasify biomass or *** optimization design is closely related to wall-to-bed heat transfer,where particle convective heat transfer plays an important *** paper evaluates the particle convective heat transfer coefficient(h_(pc))at the wall in SCWFB using the single particle *** critical parameters in the single particle model which is difficult to get experimentally are obtained by the computational fluid dynamics-discrete element method(CFD-DEM).The contact statistics related to particle-to-wall heat transfer,such as contact number and contact distance,are also *** results show that particle residence time(τ),as the key parameter to evaluate h_(pc),is found to decrease with rising velocity,while increase with larger thermal boundary layer thickness.τfollows a gamma function initially adopted in the gas-solid fluidized bed,making it possible to evaluate h_(pc) in SCWFB by a simplified single particle *** theoretical predicted h_(pc) tends to increase with rising thermal gradient thickness at a lower velocity(1.5 U_(mf)),while first decreases and then increases at higher velocity(1.75 and 2 U_(mf)).h_(pc) occupies 30%-57%of the overall wall-to-bed heat transfer coefficient for a particle diameter of 0.25 *** results are helpful to predict the overall wall-to-bed heat transfer coefficient in SCWFB combined with a reasonable fluid convective heat transfer model from a theoretical perspective.

关键词： Supercritical water Fluidized bed Particle residence time Discrete element method Single particle model

来源：评论

学校读者我要写书评

暂无评论

Influence of Soil-Structure Interaction Models on the Dynamic Responses of An Offshore Wind Turbine Under Environmental Loads

引用

China Ocean engineering 2023年第2期37卷 218-231页

作者： TANG Hong-ming YUE Min-nan YAN Yang-tian LI Zhi-hao LI Chun NIU Kai-lun School of Energy and Power Engineering University of Shanghai for Science and TechnologyShanghai 200093China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer in Power Engineering Shanghai 200093China

Offshore wind turbines(OWTs) suffer wind, wave and earthquake loads. The investigation of OWTs' dynamic response under environmental loads is essential for structural safety assessment. The soil-structure interaction(SSI)significantly affects the responses of OWT under environmental loads. However, there is few systematic research about the difference in the dynamic response of different SSI models under environmental loads. In order to solve the problem, the OWT is modeled by shell element, and several SSI models are built. The wind, wave and earthquake loads are taken into account. Moreover, the dynamic response, fatigue and buckling analysis are performed by ANSYS. The results indicate that SSI cannot be ignored in the dynamic response of the OWT under wind and wave loads. The SSI can decrease the displacement response of the OWT by 19% under wind and wave loads and reduce the fatigue damage of the pile. Multi-layer SSI can strongly influence the OWT's dynamic response under wind and wave loads or earthquake-only load. The vertical earthquake load increases the dynamic response in three ***, in order to simulate real environment, multi-layer SSI, soil damping and vertical SSI must be considered to evaluate the displacement response of the OWT under wind, wave and earthquake loads. The earthquake and gravity loads can cause more obvious response of the OWT than that of only wind and wave loads. The top and bottom of the tower are prone to occur buckling.

关键词： OWT soil structure interaction earthquake dynamic analysis structural damage

来源：评论

学校读者我要写书评

暂无评论

Modulating redox transition kinetics by anion regulation in Ni-Fe-X(X=O,S,Se,N,and P)electrocatalyst for efficient water oxidation

引用

Nano Research 2024年第6期17卷 4720-4728页

作者： Liting Wei Kaini Zhang Rui Zhao Lei Zhang Yan Zhang Suyi Yang Jinzhan Su International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China Department of Applied Chemistry Yuncheng UniversityYuncheng 044000China

NiFe-based electrocatalysts will experience dynamical surface reconstruction during oxygen evolution reaction(OER)process,and the derived metal(oxy)hydroxide hybrids on the surface have been considered as the actual active species for *** efforts have been dedicated to understanding the surface reconstruction,but there is rare research on recognizing the origin of improved performance derived from anion species of ***,the OER electrocatalytic characteristics were tuned with different anions in NiFe-based catalyst,using NiFe-based oxides/nitride/sulfide/selenides/phosphides(NiFeX,X=O,N,S,Se,and P)as the model *** combination of X-ray photoelectronic spectroscopy,electrochemical tests,operando spectroscopic characterizations,and density functional theory(DFT)calculations,reveals that anion with lower electronegativity in NiFe-based catalyst leads to higher conductivity and delayed valence transition of Ni sites,as well as optimized adsorption behavior towards oxygen intermediates,contributing to enhanced OER ***,NiFeP electrocatalyst demonstrates an ultralow overpotential of 265 mV at 20 mA·cm−2 for OER,as well as long-term *** work not only offers further insights into the effect of anionic electronegativity on the intrinsic OER electrocatalytic properties of NiFe-based electrocatalyst but also provides guide to design efficient non-noble metal-based electrocatalysts for water oxidation.

关键词： oxygen evolution reaction(OER) anion species electronegativity valence transition

来源：评论

学校读者我要写书评

暂无评论

3D particle streak velocimetry by defocused imaging

引用

Particuology 2023年第1期72卷 1-9页

作者： Xiangrui Dong Xiaoxiao Wang Wu Zhou Fangting Wang Xinran Tang Xiaoshu Cai School of Energy and Power Engineering University of Shanghai for Science and TechnologyShanghai 200093China Shanghai Key Laboratory of Multiphase Flow and Heat Transfer for Power Engineering Shanghai 200093China

Particle streak velocimetry (PSV) has become one of the important branches of flow filed measurements. It extracts velocity information from particle trajectories captured by single frame long exposure images. Since the defocus of moving particle is inevitable during a long exposure time and under a large magnification, a novel three-dimensional (3D) velocity measurement method named defocusing particle streak velocimetry (DPSV) is proposed in this paper. On the one hand, an extension from two-dimensional (2D) to 3D velocity measurement with a monocular system is carried out. The depth information of the particle, which reflects the position in the third dimension, is indicated by the defocusing degree (characteristic parameter σ) of the particle images. The variation of σ along the trajectory is recognized by surface fitting of the gray value distribution of particle images, assuming that σ varies linearly along the trajectory. On the other hand, based on the linear fitting for the straight trajectory, an arc fitting model is developed for curved trajectories which are commonly captured in turbulent flow. The relationship between σ and the particle depth position z is experimentally calibrated using a LED light and a diaphragm. Finally, the DPSV method is verified in a submerged jet flow field as well as in a microchannel flow field to obtain the 3D velocity field with single monocular system.

关键词： Defocusing particle streak velocimetry Curve trajectory Three-dimensional velocity Gray value distribution

来源：评论

学校读者我要写书评

暂无评论

Polyacrylate modified Cu electrode for selective electrochemical CO_(2) reduction towards multicarbon products

引用

Science Bulletin 2024年第15期69卷 2395-2404页

作者： Yuchuan Shi Kaini Zhang Chung-Li Dong Ta Thi Thuy Nga Miao Wang Daixing Wei Jialin Wang Yiqing Wang Shaohua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong UniversityXi’an 710049China Department of Physics Tamkang UniversityNew Taipei City 25137China

Highly selective production of value-added multicarbon(C^(2+))products via electrochemical CO_(2) reduction reaction(eCO_(2)RR)on polycrystalline copper(Cu)remains ***,the facile surface modification using poly(α-ethyl cyanoacrylate)(PECA)is presented to greatly enhance the C^(2+)selectivity for eCO_(2)RR over polycrystalline Cu,with Faradaic efficiency(FE)towards C^(2+)products increased from30.1%for the Cu electrode to 72.6%for the obtained Cu-PECA electrode at-1.1 V *** hydrogen electrode(RHE).Given the well-determined FEs towards C^(2+)products,the partial current densities for C^(2+)production could be estimated to be-145.4 mA cm~(-2)for the Cu-PECA electrode at-0.9 V *** in a homemade flow ***-situ spectral characterizations and theoretical calculations reveal that PECA featured with electron-accepting-C≡N and-COOR groups decorated onto the Cu electrode could inhibit the adsorption of^(*)H intermediates and stabilize the^(*)CO intermediates,given the redistributed interfacial electron density and the raised energy level of d-band center(E_(d))of Cu active sites,thus facilitating the C-C coupling and then the C^(2+)selective *** study is believed to be guidable to the modification of electrocatalysts and electrodes with polymers to steer the surface adsorption behaviors of reaction intermediates to realize practical eCO_(2)RR towards value-added C^(2+)products with high activity and selectivity.

关键词： Electrochemical CO_(2)reduction Polymer modification Electron transfer C_(2+)products

来源：评论

学校读者我要写书评

暂无评论

Numerical investigations on cluster characteristics in the supercritical water circulating fluidized bed riser

引用

Particuology 2024年第11期94卷 281-293页

作者： Kenan Xi Runqing Li Xiazhi Li Mei Li Xiudong Xu Yu Zhang Hao Wang Youjun Lu Northwest Institute of Nuclear Technology Xi'an710024China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an710049China Xi'an Institute of Applied Optics Xi'an710065China

There are currently no reports about clusters in the supercritical water circulating fluidized bed(SCWCFB).Simulations were conducted to investigate the numbers,diameters,aspect ratios,circularity,and orientation angles of cluster in the riser of SCWCFB via two-fluid model across different flow velocities,solid circulation rates,pressures,and *** results show that cluster numbers are mainly between 10 and 80 per *** are more at the bottom but less at the top,and more near the wall but less at the *** diameters are mainly between 0.2 and 0.5 times the bed *** are large at the bottom but small at the top,and large at the center but small near the *** aspect ratios are mainly between 0 and 1,indicating that most clusters have shorter width than their ***-like clusters are more likely to appear near the walls,and clusters at the center of the riser are more likely to be *** circularity is mainly between 0.2 and 0.4,suggesting that the shapes of clusters are far from the *** absolute values of cluster orientation angles are mainly between 75°and 90°,indicating that most clusters move in the vertical *** fluid velocities may facilitate cluster coalescence.

关键词： Supercritical water Circulating fluidized bed Cluster Two-fluid model Riser

来源：评论

学校读者我要写书评

暂无评论

DISTRIBUTED MULTI-ENERGY SYSTEMS CONSIDERING power-TO-X TECHNOLOGY: PLANNING, SCHEDULING, AND PERFORMANCE ASSESSMENT 37

DISTRIBUTED MULTI-ENERGY SYSTEMS CONSIDERING POWER-TO-X TECH...

引用

37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2024

作者： Xue, Kai Wang, Jinshi Han, Xiaoqu Zhao, Quanbin Chong, Daotong Chen, Weixiong Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Shannxi Xi'an China

ISBN: (纸本)9798331307660

The distributed multi-energy systems place emphasis on the complementary and local application of heterogeneous energy sources, and power to methanol process can be coupled, reducing carbon emissions while increasing the *** providing an economical and low-carbon solution, a real community energy system integrated with solar energy and natural gas has been investigated in this *** at the minimization of the daily cost referring to the net expenditure after considering the offsetting benefits, the carbon capture, water electrolysis, and methanol synthesis are combined, with the methanol and oxygen exported as *** capacity planning and operation scheduling have been performed, and the results indicated that the daily cost can be reduced by 69.67% compared to the conventional energy supply after the scheduling *** the case scenario and typical day, the production of methanol and oxygen is 6.30 t and 13.49 t based on an electricity demand of 28.78 MWh and a heat demand of 11.85 *** to the contribution of carbon capture, the purchase of 5.90 t of carbon allowances is avoided and instead there are 3.86 t of allowances available for ***, the effect of device capacity and operating parameters on economics has been *** study could help to promote the application of power to methanol in distributed energy systems. © 2024 37th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2024. All rights reserved.

关键词： Carbon capture and utilization

来源：评论

学校读者我要写书评

暂无评论

Review of spatial scale dispersion models (ATDMs) to simulate environmental dispersion and deposition of radionuclides and the overview of GIS coupling with dispersion models

International Journal of Advanced Nuclear Reactor Design and...

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2024年第4期6卷 256-280页

作者： Muhammad, Hussaini Xuan, Wang Wang, Mingjun Su, Guanghui School of Nuclear Science and Technology Shanxi Key Laboratory of Advanced Nuclear Energy and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China Abuja Nigeria

Estimation of the radiological consequences including the calculation of radiation doses to the exposed population requires numerical evaluation of atmospheric radioactive releases from nuclear facilities under accidental scenarios for implementation of adequate protective and other response actions to prevent or minimize severe deterministic effects and reduce the probability of occurrence of stochastic effects. This paper reviews various state-of-the-art spatial scale atmospheric dispersion models, known as the ATDMs, designed to evaluate atmospheric transport, dispersion, and depositions of radionuclide emissions from release sources. The ATDMs (atmospheric transport, dispersion, and deposition models) reviewed in this paper are FLEXPART, CALPUFF, LADAS, RASCAL, RIMPUFF, and HotSpot. These ATDMs are increasingly applied to perform probabilistic radiological risk assessment, which is one of the IAEA safety requirements for site evaluation of new NPP, and the calculated doses can be used to establish EPZs, an underlying basis of emergency preparedness. The numerical approaches, modeling methodology, advantages, limitations, scope of applications, and research investigations performed using these models in radiological and other environmental impact assessments within their scope of applications are presented. GIS has been widely recognized as a technique applied to aid the modeling of pollutant dispersion and visualization of model outputs in a spatial context, among other benefits. In nuclear accident consequence evaluation, spatial data provides key information such as accident location, range of radiological contamination, population density, etc, which are very important. This demonstrates the high significance of GIS-ATDMs coupling. Therefore, an overview of the coupling of dispersion models with GIS is also highlighted. © 2025 Xi'an Jiaotong University

关键词： Risk assessment

来源：评论

学校读者我要写书评

暂无评论

Construction of Z-Scheme In_(2)S_(3)-TiO_(2) for CO_(2) Reduction under Concentrated Natural Sunlight

引用

Chinese Journal of Structural Chemistry 2022年第1期41卷 34-39页

作者： Ya Liu Fangbo Yu Feng Wang Shengjie Bai Guiwei He State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Producing chemical fuels from sunlight enables a sustainable way for energy *** various solar fuel generation approaches,photocatalytic CO_(2) reduction has the advantages of simple structure,mild reaction condition,directly reducing carbon emissions,***,most of the current photocatalytic systems can only absorb the UV-visible spectrum of solar ***,finding a way to utilize infrared light in the photocatalytic system has attracted more and more ***,a Z-scheme In_(2)S_(3)-TiO_(2) was constructed for CO_(2) reduction under concentrated natural *** infrared light was used to create a high-temperature environment for photocatalytic *** evolution rates of H2,CO,and C2H5OH reached 262.2,73.9,and 27.56μmol・h^(-1)・g^(-1),respectively,with an overall solar to fuels efficiency of 0.002%.This work provides a composite photocatalyst towards the utilization of full solar light spectrum,and could promote the research on photocatalytic CO_(2) reduction.

关键词： solar energy CO_(2) In_(2)S_(3) TiO_(2)

来源：评论

学校读者我要写书评

暂无评论

High tension cyclic hydrocarbons synthesized from biomass-derived platform molecules for aviation fuels in two steps

引用

Green Energy & Environment 2023年第1期8卷 331-337页

作者： Zhanchao Li Yizhuo Wang Qing Li Liqing Xu Hong Wang Frontier Institute of Science and Technology Xi'an Jiaotong UniversityXi'an710054China State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an710054China

Synthesizing ring structure aviation fuels from biomass-derived platform molecules is challenging,especially for bridged ring structure aviation fuels which are typically achieved from fossil-derived ***,we report the synthesis of a series of ring structure biofuels in two steps by a combination of a solvent-free Michael-cyclization reaction and a hydrodeoxygenation(HDO)reaction from lignocellulosederived 5,5-dimethyl-1,*** biofuels are obtained with high overall yields up to 90%,which exhibit high densities of 0.81 g cm^(-3)-0.88 g cm^(-3)and high volumetric neat heat of combustion(VNHOC)values of 36.0 MJ L^(-1)-38.6 MJ L^(-1).More importantly,bridged-ring structure hydrocarbons can also be achieved in two steps by a combination of a Robinson annulation reaction and an HDO reaction to afford the final products at high overall yields up to 90%.The bridged-ring structure products have comparable high densities and high VNHOC values to the best artificial fuel JP-10(0.94 g cm^(-3)and 39.6 MJ L^(-1)).The results demonstrate a promising way for the synthesis of high-density aviation fuels with different fuel properties at high yields.

关键词： Biofuels 5,5-Dimethyl-1,3-cyclohexanedione Solvent-free Michael-cyclization Robinson annulation Green reaction

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：