检索结果-内蒙古大学图书馆

International Conference on power engineering 2021, ICOPE 2021

作者： Tan, Jingkao Zhou, Qulan Yao, Yashu Li, Na State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University China

Rice husk ash contains SiO2 with a mass fraction of 87%-97%. Through controlled combustion under suitable conditions, SiO2 in rice husk ash will be amorphous, with high activity and rich porosity, which can be applied to construction, silicon preparation and adsorption *** it is necessary to study the effects of combustion parameters on the quality of RHA. Compared to conventional boiler furnace, the fluidized bed combustor has a lower combustion temperature and a longer residence time, which is suitable for the production of high quality amorphous rice husk ash. In this thesis, the effects of fluidized bed combustion parameters on the quality of RHA will be studied to provide guidance for amorphous SiO2 preparation by combustion control in boiler. On the existing 15kw bench-scale fluidized bed system, experiments were made to study the effects of fluidized bed combustion parameters on the quality of RHA. The rice husk combustion curve was comprehensively depicted, and the rice husk ash was analyzed by BET analysis, XRD scanning and thermogravimetric analysis. Therefore, the casual relationship between rice husk combustion process and RHA quality was evaluated comprehensively. © 2021 The Japan Society of Mechanical Engineers.

关键词： Quality control

来源：评论

学校读者我要写书评

暂无评论

Analytical solution for temperature distribution in functionally graded cylindrical shells under convective cooling

Analytical solution for temperature distribution in function...

引用

作者： Emamian, Amin Amiri Delouei, Amin Karimnejad, Sajjad Jing, Dengwei International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China Department of Mechanical Engineering University of Bojnord Bojnord Iran Mechanical Engineering Department Shahrood University of Technology Shahrood Iran

In the current study, an analytical solution for the temperature distribution in a cylindrical shell that is made of functionally graded material is obtained. The general boundary condition is considered for achieving the solution, and particularly convective cooling plays the dominant role in this problem. The obtained solution is first verified against the numerical data, and then, the credibility of the solution for studying practical problems is tested employing two illustrative test cases with various boundary conditions. Parametric studies are done to evaluate some significant parameters, including material constant, boundary conditions, and convection on temperature distribution. It is seen that boundary condition plays a dominant role in the cooling rate. Material constant does not have a significant effect on the temperature distribution. The current study can be hired to better the design and production process of cylindrical shells made of functionally graded material. © 2021 John Wiley & Sons, Ltd.

关键词： Functionally graded materials

来源：评论

学校读者我要写书评

暂无评论

Reduction kinetics of SrFeO_(3−δ)/CaO∙MnO nanocomposite as effective oxygen carrier for chemical looping partial oxidation of methane

引用

Frontiers of Chemical Science and engineering 2022年第12期16卷 1726-1734页

作者： Xinhe Wang Liuqing Yang Xiaolin Ji Yunfei Gao Fanxing Li Junshe Zhang Jinjia Wei State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China School of Chemical Engineering and Technology Xi’an Jiaotong UniversityXi’an 710049China Institute of Clean Coal Technology East China University of Science and TechnologyShanghai 200237China Department of Chemical and Biomolecular Engineering North Carolina State UniversityRaleighNC 27695USA

Chemical looping reforming of methane is a novel and effective approach to convert methane to syngas,in which oxygen transfer is achieved by a redox *** lots of efforts have been made to develop high-performance redox materials,a few studies have focused on the redox *** this work,the kinetics of SrFeO_(3−δ)–CaO∙MnO nanocomposite reduction by methane was investigated both on a thermo-gravimetric analyzer and in a packed-bed *** the methane reduction,combustion occurs before the partial oxidation and there exists a transition between *** weight loss due to combustion increases,but the transition region becomes less inconspicuous as the reduction temperature *** weight loss associated with the partial oxidation is much larger than that with *** rate of weight loss related to the partial oxidation is well fitted by the Avrami–Erofeyev equation with n=3(A3 model)with an activation energy of 59.8 kJ∙mol^(‒1).The rate law for the partial oxidation includes a solid conversion term whose expression is given by the A3 model and a methane pressure-dependent term represented by a power *** partial oxidation is half order with respect to methane *** proposed rate law could well predict the reduction kinetics;thus,it may be used to design and/or analyze a chemical looping reforming reactor.

关键词： chemical looping reforming SrFeO_(3−δ) CaO·MnO nanocomposite reduction kinetics Avrami–Erofeyev model pressure-dependent term

来源：评论

学校读者我要写书评

暂无评论

In Situ Synthesis of Cu_(3)P/P-Doped g-C_(3)N_(4)Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution

引用

Chinese Journal of Chemistry 2023年第2期41卷 173-180页

作者： Fangyong Hou Feng Liu Haochen Wu Muhammad Qasim Yi Chen Yang Duan Zhibo Feng Maochang Liu International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'anShaanxi 710049China School of Electronic Engineering Jiujiang UniversityJiujiangJiangxi 332005China Gree Altairnano New Energy Inc ZhuhaiGuangdong 519040China Suzhou Academy of Xi'an Jiao tong University SuzhouJiangsu 215123China

Heterojunction design in a two-dimensional(2D)fashion has been deemed beneficial for improving the photocatalytic activity of g-C_(3)N_(4)because of the promoted interfacial charge transfer,yet still facing ***,we construct a novel 2D/2D Cu_(3)P nanosheet/P-doped g-C_(3)N_(4)(PCN)nanosheet heterojunction photocatalyst(PCN/Cu_(3)P)through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C_(3)N_(4)composite for photocatalytic H2 *** demonstrate that the 2D lamellar structure of both CuS and g-C_(3)N_(4)could be well reserved in the phosphorization process,while CuS and g-C_(3)N_(4)in-situ transformed into Cu_(3)P and PCN,respectively,leading to the formation of PCN/Cu_(3)P tight 2D/2D *** to the large contact area provided by intimate face-to-face 2D/2D structure,the PCN/Cu_(3)P photocatalyst exhibits significantly enhanced charge separation efficiency,thus achieving a boosted visible-light-driven photocatalytic *** highest rate for H2 evolution reaches 5.12 umol·h^(-1),nearly 24 times and 368 times higher than that of pristine PCN and g-C_(3)N_(4),*** work represents an excellent example in elaborately con-structing g-C_(3)N_(4)-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.

关键词： Photocatalysis Water splitting 2D/2D heterojunction g-C_(3)N_(4) Energy conversion Charge transfer Nanosheet photocatalyst

来源：评论

学校读者我要写书评

暂无评论

Genetically engineered nifA mutations in Rhodobacter capsulatus to enhance ammonium tolerance and hydrogen production

引用

International Journal of Hydrogen Energy 2025年 144卷 252-261页

作者： Zixuan Gao Xintong Gao Yu Ma Zhixuan Jiao Minmin Wang Xuefang Mu Jiali Feng Wen Cao Liejin Guo State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an 710049 Shaanxi China College of Biology and Oceanography Weifang University Weifang 261061 Shandong China

NifA, the activator of nitrogenase, is sensitive to ammonium concentration, particularly within its N-terminal domain. In this work, genetically engineered mutants with N-terminal deletions of the nifA1 and nifA2 genes were constructed using overlap extension PCR to reduce the inhibitory effect of ammonium on nitrogenase expression in Rhodobacter capsulatus SB1003. Under 3 mM NH 4 + , the hydrogen production rate of ZX03 ( nifA1 - , nifA2 - ) reached 0.65 mmol L −1 h −1 , with a 31.2 % increase in hydrogen production compared to the wild-type. When 8 mM NH 4 + was used as the sole nitrogen source, H 2 production in all strains decreased substantially compared to 5 mM NH 4 + . However, ZX03 demonstrated a 5.2-fold enhancement in hydrogen production relative to the wild-type under 8 mM NH 4 + , underscoring its improved ammonium tolerance. During hydrogen production, the gene expression levels of nifA and nifH in all mutant strains were significantly up-regulated under ammonium conditions compared to the wild-type. These findings reveal distinct roles of nifA1 and nifA2 in ammonium tolerance and hydrogen production.

关键词： Gene splicing N-terminal Nitrogenase expression Photo fermentative hydrogen production Transcriptional activator

来源：评论

学校读者我要写书评

暂无评论

CFD simulation of thermal hydraulic characteristics in a typical upper plenum of RPV

引用

Frontiers in Energy 2021年第4期15卷 930-945页

作者： Mingjun WANG Lianfa WANG Yingjie WANG Wenxi TIAN Jian DENG Guanghui SU Suizheng QI State Key Laboratory of Multiphase Flow in Power Engineering Department of Nuclear Science and TechnologyXi’an Jiaotong UniversityXi’an 710049China Science and Technology on Reactor System Design Technology Laboratory Nuclear Power Institute of ChinaChengdu 610213China

A comparative computational fluid dynamics(CFD)study was conducted on the three different types of pressurized water reactor(PWR)upper plenum,named TYPE 1(support columns(SCs)and control rod guide tubes(CRGTs)with two large windows),TYPE 2(SCs and CRGTs without windows),and TYPE 3(two parallel perforated barrel shells and CRGTs).First,three types of upper plenum geometry information were collected,simplified,and adopted into the BORA facility,which is a 1/5 scale system of the four-loop PWR ***,the geometry,including the upper half core,upper plenum region,and hot legs,was built using the Salome *** that,an unsteady calculation to simulate the reactor balance operation at hot full power scenario was ***,the differences of flowrate distribution at the core outlet and temperature distribution and transverse velocity inside the hot legs with different upper plenum internals were *** results suggest that TYPE 1 upper plenum internals cause the largest flowrate difference at the core outlet while TYPE 3 leads to the most even distributed *** distribution and evolution pattern of the tangential velocity inside hot legs is highly dependent on the upper plenum *** counter-rotating swirls exist inside the TYPE 1 hot leg and only one swirl revolving around the hog leg axis exist inside the TYPE 2 hot *** TYPE 3,two swirls like that of TYPE 1 rotating around the hot leg axis significantly increase the temperature homogenization *** research provides meaningful guidelines for the future optimization and design of advanced PWR upper plenum internal structures.

关键词： pressurized water reactor(PWR) upper plenum internal structures temperature distribution computational fluid dynamics(CFD)

来源：评论

学校读者我要写书评

暂无评论

Comparative Life Cycle Analysis of Battery Energy Storage Technologies for Grid Applications: Case Study in China 35

Comparative Life Cycle Analysis of Battery Energy Storage Te...

引用

35th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2022

作者： Han, Xiaoqu Li, Yanxin Chang, Hongzhang Chen, Nana Huang, Xiaofan Tang, Xiaoping Yan, Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China Huadian Electric Power Research Institute Co. Ltd. Beijing China

ISBN: (纸本)9788774756989

With ever increasing penetration of renewable energy sources into the power grid, the development and commercialization of large-scale energy storage system (ESS) have been accelerated. It is of great significance to evaluate the sustainability of ESSs for grid applications. In the present work, a comprehensive life cycle inventory analysis model, which involves the manufacturing, usage, transportation and recycling processes, was developed for lithium iron phosphate battery (LIPB), nickel manganese cobalt oxide battery (NMCB) and vanadium redox flow battery (VRFB). The functional unit was 1MWh of delivered energy from ESS to the grid. The ReCiPe 2016 (H) method was selected and data analysis was carried out in SimaPro software. The global warming potential (GWP) of LIPB, NMCB and VRFB in the grid peak-shaving scenario were obtained as 129 kgCO2-eq/MWh, 146 kgCO2-eq/MWh and 365 kgCO2-eq/MWh, respectively. GWP of different batteries in renewable energy sources (photovoltaic and wind power) was also predicted based on the developed model. The key materials that contributed significantly to GWP were also identified. Moreover, the future trend in GWP was analyzed based on the carbon peaking and carbon neutrality goals. It is indicated that GWP of LIPB, NMCB and VRFB in the announced pledges scenario could be reduced to approximately 75% in 2030, and 24%~41% in 2050, respectively. Parametric analysis was then carried out, indicating that the round-trip efficiency and number of daily cycles exhibited the significant influence. The results would promote the environment, policy and business model optimization for large-scale energy storage in the low-carbon power systems. © Proceedings of ECOS 2022 - 35th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems.

关键词： Life cycle

来源：评论

学校读者我要写书评

暂无评论

The manipulation of rectifying contact of Co and nitrogen-doped carbon hierarchical superstructures toward high-performance oxygen reduction reaction

引用

Carbon Energy 2024年第9期6卷 338-349页

作者： Jing Li Tingyu Lu Yu Fang Guangyao Zhou Mingyi Zhang Huan Pang Jun Yang Yawen Tang Lin Xu Jiangsu Key Laboratory of New Power Batteries School of Chemistry and Materials ScienceJiangsu Collaborative Innovation Center of Biomedical Functional MaterialsNanjing Normal UniversityNanjingJiangsuChina College of Science Jinling Institute of TechnologyNanjingJiangsuChina Key Laboratory for Photonic and Electronic Bandgap Materials Ministry of EducationSchool of Physics and Electronic EngineeringHarbin Normal UniversityHarbinHeilongjiangChina School of Chemistry and Chemical Engineering Yangzhou UniversityYangzhouJiangsuChina State Key Laboratory of Multiphase Complex Systems Center of MesoscienceInstitute of Process EngineeringChinese Academy of SciencesBeijingChina

Rational design and construction of oxygen reduction reaction(ORR)electrocatalysts with high activity,good stability,and low price are essential for the practical applications of renewable energy conversion devices,such as metal-air *** modification through constructing metal/semiconductor Schottky heterointerface represents a powerful strategy to enhance the electrochemical ***,we demonstrate a concept of Schottky electrocatalyst composed of uniform Co nanoparticles in situ anchored on the carbon nanotubes aligned on the carbon nanosheets(denoted as Co@N-CNTs/NSs hereafter)toward *** experimental findings and theoretical simulation testify that the rectifying contact could impel the voluntary electron flow from Co to N-CNTs/NSs and create an internal electric field,thereby boosting the electron transfer rate and improving the intrinsic *** a consequence,the Co@N-CNTs/NSs deliver outstanding ORR activity,impressive long-term durability,excellent methanol tolerance,and good performance as the air-cathode in the Zn-air *** design concept of Schottky contact may provide the innovational inspirations for the synthesis of advanced catalysts in sustainable energy conversion fields.

关键词： Co-based electrocatalysts oxygen reduction reaction rectifying contact Zn-air batteries

来源：评论

学校读者我要写书评

暂无评论

Liutex identification on hairpin vortex structures in a channel based on msfle and moving-PIV

引用

Journal of Hydrodynamics 2021年第6期33卷 1119-1128页

作者： Xin-ran Tang Xiang-rui Dong Xiao-shu Cai Wu Zhou School of Energy and Power Engineering University of Shanghai for Science and TechnologyShanghai 200093China Key Laboratory of Multiphase Flow and Heat Transfer in Shanghai Power Engineering University of Shanghai for Science and TechnologyShanghai 200093China

The spatiotemporal evolution of hairpin vortex structures in a fully developed turbulent boundary layer is investigated qualitatively and quantitatively by using two image *** this paper,the moving single-frame and long-exposure(MSFLE)image method is used to intuitively track the evolution process of a hairpin vortex,while the moving particle image velocimetry(moving-PIV)method is applied for obtaining a moving velocity field for quantitative *** to the structural characteristics of the hairpin vortex,an inclined light sheet with an appropriate inclination of 53°is arranged to capture the complete hairpin vortex structure at Re_(θ)=97–*** addition,the core size and the rotational strength of a hairpin vortex are further defined and quantified by the Liutex vector *** evolution process of a complete hairpin vortex structure observed by MSFLE shows that the shear along the normal direction leads to an increasing strength of the hairpin vortex,accompanied by a lifting vortex head and a distance decrease between two vortex legs during the dissipation *** combining moving-PIV with the Liutex identification,the spatiotemporal evolution of four typical regions of a hairpin vortex projecting into a 53°cross-section is *** results show that the process from the generation to the dissipation of a single hairpin vortex can be well characterized and recorded by the Liutex based on the core size and rotational intensity,and the evolution process is consistent with the MSFLE *** to the statistics of vortex core size and rotation intensity along time,the evolution of the hairpin vortex necks and legs can be described as a process of enhancement followed by *** the vortex head,its evolution maintains longer attributed to its far-from-wall position,which consists of an absolute enhancement process(stage 1)with an increasing rotation strength and a constant core size,and an absolute dissipation(stage 2)with a dec

关键词： Turbulent boundary layer hairpin vortex moving single-frame and long-exposure moving particle image velocimetry(PIV) Liutex vortex identification method

来源：评论

学校读者我要写书评

暂无评论

Spherical Particle Assumption Underestimates Fluid-Solid Reaction Rate

SSRN

引用

SSRN 2023年

作者： Zhao, Shuaiqi Zhang, Rui Huang, Han Zhao, Kunpeng Bai, Bofeng State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong University Xi’an710049 China

Fluid-solid reaction of porous particles is pivotal to many modern chemical industries from heterogeneous catalysis to solid gasification. Most studies usually assume the particles are spherical, and the morphology of the shrinking reaction fronts inside particles are invariant. However, the developed models cannot explain the recent experimental observations of the non-spherical particles reaction, and lead to significant estimation errors of reaction rate. Here, we propose a three-dimensional (3D) reaction-diffusion model inside the irregular-shaped particles, and investigate the universal fluid-solid reaction kinetics. Intrapore homogenous reactions, multi-species diffusion, the sphericity (φ) and 3D roundness (R3d) evolution of the reaction front morphology are fully accounted for. The numerical method has been experimentally validated. When compared with spherical particles, we found that particles have higher heat and species transfer efficiency with fluids through the irregular-shaped particle surfaces, and higher reaction rate through the irregular-shaped reaction fronts. Thus, the invariant reaction front morphology assumption overestimates the fluid-solid reaction rate by up to 52%, while the spherical particle assumption underestimates the reaction rate by up to 42%. A corrected correlation is thereby proposed to better estimate the average reaction rate and complete reaction time of the irregular-shaped particles. The underestimation of reaction rate by the spherical particle assumption is inversely proportional to φ1.7 of the initial particle morphology, and directly proportional to [[EQUATION]]. The present work provides an accurate theoretical method for the fluid-solid reaction kinetics, and a detailed description of the reaction front inside particles. © 2023, The Authors. All rights reserved.

关键词： Reaction rates

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：