检索结果-内蒙古大学图书馆

Designing Unpowered Shoulder Complex Exoskeleton via Contralateral Drive for Self-rehabilitation of Post-stroke Hemiparesis

引用

Journal of Bionic Engineering 2023年第3期20卷 992-1007页

作者： Ning Li Tie Yang Yang Yang Wenyuan Chen Peng Yu Chuang Zhang Ning Xi Ying Zhao Wenxue Wang State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang110169China University of Chinese Academy of Sciences Beijing100049China Emerging Technologies Institute Department of Industrial and Manufacturing Systems EngineeringUniversity of Hong KongPokfulamHong Kong999077China Department of General Surgery Shengjing Hospital of China Medical UniversityShenyang110004China

Rehabilitation using exoskeleton robots can effectively remediate dysfunction and restore post-stroke survivors’ physical ability. However, low kinematic compatibility and poor self-participation of post-stroke patients in rehabilitation restrict the outcomes of exoskeleton-based therapy. The study presents an Unpowered Shoulder Complex Exoskeleton (USCE), consisting of Shoulder Girdle Mechanism (SGM), Ball-and-Socket Joint Mechanism (BSM), Gravity Compensating Mechanism (GCM) and Adjustable Alignment Design (AAD), to achieve self-rehabilitation of shoulder via energy transfer from the healthy upper limb to the affected counterpart of post-stroke hemiplegic patients. The SGM and AAD are designed to improve the kinematic compatibility by compensating for displacements of the glenohumeral joint with the adaptable size of USCE for different wearers. The BSM and GCM can transfer the body movement and energy from the healthy half of the body to the affected side without external energy input and enhance the self-participation with sick posture correction. The experimental results show that the USCE can provide high kinematic compatibility with 90.9% movement similarity between human and exoskeleton. Meanwhile, the motion ability of a post-stroke patient’s affected limb can be increased through energy transfer. It is expected that USCE can improve outcomes of home-based self-rehabilitation.

关键词： Unpowered exoskeleton Health-paralysis combination Energy transfer Self-rehabilitation Shoulder mechanism design

来源：评论

学校读者我要写书评

暂无评论

A new SPICE modeling approach of annular MOSFET in 350 nm commercial CMOS process 3

A new SPICE modeling approach of annular MOSFET in 350 nm co...

引用

3rd International Conference on Electronic Information Engineering and Computer, EIECT 2023

作者： Cheng, He Yang, Zhijia Zhang, Chao Zhang, Zhipeng Key Laboratory of Networked Control Systems Chinese Academy of Sciences China Shenyang Institute of Automation Chinese Academy of Sciences China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (纸本)9798350357707

Annular gate MOSFETs have emerged as potential solutions for radiation-hardened electronics, demonstrating exceptional total ionizing dose tolerance. However, accurate modeling of annular MOSFETs is crucial when designing analog integrated circuits for use in radiation environments, especially when implementing commercial CMOS processes. To enable circuit simulation using tools like SPECTRE/SPICE, foundry-provided PDKs must incorporate a rigorously verified compact model of annular MOSFET behavior. TCAD simulation can then be used to numerically evaluate the current characteristics of the annular MOSFET against the refined compact model constructed from the foundry-provided PDK. In this paper, by aligning the current characteristics of a standard NMOS between TCAD and SPICE simulations, we can verify the material process conditions. Then, based on the material process parameters, the model of the annular gate MOSFET is established using the TCAD simulator. Finally, reasonable agreements are obtained between the TCAD and SPICE simulation results for the IDS-VGS and IDS-VDS characteristics. © 2023 IEEE.

关键词： Foundries

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of Industrial Real-Time Ethernet Redundant Network Based on Parallel Redundancy Protocol 3

Design and Implementation of Industrial Real-Time Ethernet R...

引用

3rd International Conference on Computer Science, Electronic Information Engineering and intelligent Control Technology, CEI 2023

作者： Gang, Mingxu Yan, Bingjun Hu, Bo Chinese Academy of Sciences Key Laboratory of Networked Control Systems China Shenyang Institute of Automation Chinese Academy of Sciences China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (纸本)9798350372052

Industrial real-time Ethernet technology is widely used in modern industrial control systems due to its high communication rate and low application cost. However, in complex network environments, industrial real-time Ethernet may encounter data collisions, data loss, and other issues, which reduce the overall reliability of industrial control systems. To address these issues, a method for designing and implementing industrial real-time Ethernet redundancy networks based on parallel redundancy protocols is proposed. The method first analyzes the redundant data frame structure, dual-connected node (DANP) structure, and redundancy implementation principle of parallel redundancy protocols (PRP). Then, aiming at the standard redundancy discard algorithm principle and its shortcomings, an improved sliding window redundancy discard algorithm is proposed to adapt to complex network environments. Based on the discard algorithm, dual-connected redundancy nodes are designed and implemented. Finally, the dual-connected redundancy nodes are used as the core to construct industrial real-time Ethernet redundancy networks. The test results show that in a PRP-based industrial real-time Ethernet redundant network, when a single redundant network fails, the system can switch without delay, greatly improving the reliability of the industrial control system communication network © 2023 IEEE.

关键词： Redundancy

来源：评论

学校读者我要写书评

暂无评论

Description and fault diagnosis in autonomous underwater vehicles based on ontologies

Description and fault diagnosis in autonomous underwater veh...

引用

2022 International Conference on Ocean Studies, ICOS 2022

作者： Alexander, Timoshenko Alexander, Zuev Eduard, Mursalimov Valeria, Gribova Alexander, Inzartsev Far Eastern Federal University Institute of Marine Technology Problems Feb Ras Laboratory of Intelligent Systems for Marine Robots Department of Automation and Robotics Vladivostok Russia Institute of Automation and Control Feb Ras Laboratory of Intelligent Systems Vladivostok Russia Institute of Marine Technology Problems Feb Ras Laboratory of Control Systems Vladivostok Russia

ISBN: (纸本)9781665473729

The paper proposes new ontologies for describing and diagnosing malfunctions of subsystems of autonomous underwater vehicles (AUV) as a part of the development of a previously created approach to the intelligent diagnosis of these vehicles using knowledge bases. To implement this approach, it is proposed to use two knowledge bases, one of which describes malfunctions, features for their identification and actions necessary to adapt to the negative consequences caused by the appearance of these malfunctions. The other database contains information about the main subsystems of the AUV, devices and replaceable modules, as well as the states they may be in. Knowledge bases are used in the work of the intelligent control-emergency system (ICES) on board the AUV, which allows for comprehensive functional diagnostics of all subsystems of the device, including payload modules, as well as adaptation to the consequences of emerging malfunctions, taking into account the actual cause-and-effect relationships between them. To test the system's operability, a prototype was developed. The results of the prototype simulation showed that ICES performs the tasks and can be implemented on the onboard computers of existing AUV using well-known programming technologies. © 2022 IEEE.

关键词： Autonomous underwater vehicles

来源：评论

学校读者我要写书评

暂无评论

Model Predictive Control for Nonlinear Bilateral Teleoperation systems With Time Delay 41

Model Predictive Control for Nonlinear Bilateral Teleoperati...

引用

第41届中国控制会议

作者： Yu Liu Chuanzhi Zang Yuqi Liu Peng Zeng School of Artificial Intelligence Shenyang University of Technology Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang Institute of Automation Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of Sciences

ISBN: (数字)9789887581536

ISBN: (纸本)9781665482561

Bilateral teleoperation systems have received extensive attention as a substitute for the human to perform tasks in remote and hazardous *** paper proposes a model predictive control strategy for nonlinear bilateral teleoperation systems based on Long-Short Term Memory(LSTM) ***,model predictive control is used to achieve good tracking performance in the presence of input constraints in the *** the same time,considering the influence of different proficiency operators operating the master manipulator on the system performance,the error between the actual master manipulator trajectory and the reference trajectory is introduced into a linear feedback term to compensate for the decrease in system control accuracy caused by the error of ***,the LSTM network is used to predict the trajectory of the master manipulator in the future time equivalent to the network transmission *** predictions are used to control the remote slave manipulator,thereby eliminating the impact of communication delay on the ***,in slave sides,the trajectory creators are applied to generate the desired trajectories to achieve good force feedback *** experiments are carried out to verify the proposed control strategy,which can guarantee good performance with both position tracking and force feedback under time delay.

关键词： Model predictive control bilateral teleoperation long-short term memory network communication delay

来源：评论

学校读者我要写书评

暂无评论

Action recognition through fusion of sEMG and skeletal data in feature level

引用

Journal of Ambient Intelligence and Humanized Computing 2022年第9期13卷 4125-4134页

作者： Wang, Xinming Ding, Weili Bian, Shuangshuang Liu, Honghai Department of Automation Institute of Electrical Engineering Key Laboratory of Intelligent Rehabilitation and Neuromodulation of Hebei Province Yanshan University 438 West of Hebei Avenue Haigang District Qinhuangdao066004 China School of Mechanical Engineering and Automation State Key Laboratory of Robotics and Systems Harbin Institute of Technology Shenzhen Nanshan District Shenzhen518055 China

Human action can be recognized through a unimodal way. However, the information obtained from a single mode is limited due to the fact that a single mode contains only one type of physical attribute. Therefore, it is motivational to improve the accuracy of actions through fusion of two different complementary modality, which are the surface electromyography (sEMG) and the skeletal data. In this paper, we propose a general framework of fusion of sEMG signals and skeletal data. Firstly, vector of locally aggregated descriptor (VLAD) was extracted from sEMG sequences and skeletal sequences, respectively. Secondly, features obtained from sEMG and skeletal data are mapped through different weighted kernels using multiple kernel learning. Finally, the classification results are obtained through the model of multiple kernel learning. A dataset of 18 types of human actions is collected via KinectV2 and Thalmic Myo armband to verify our ideas. The experimental results show that the accuracy of human action recognition are improved by combining skeletal data with sEMG signals. © 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.

关键词： Musculoskeletal system

来源：评论

学校读者我要写书评

暂无评论

Industrial Data Fusion Method based on Semantic Data Dictionary for Digital Twin 3

Industrial Data Fusion Method based on Semantic Data Diction...

引用

3rd International Symposium on Computer Engineering and intelligent Communications, ISCEIC 2022

作者： Liu, Yang Zhang, Tianshi Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (纸本)9781510660298

Industrial digital twin is the key support for the transformation of industry to intelligence. The realization of digital twin relies on the integration of whole-process data, which can provide real-time and intelligent decision-making optimization for production management. This paper proposes a digital twin data fusion method based on semantic data dictionary. Firstly, a modeling method of domain data dictionary is designed, and a semantic method is introduced to realize the construction of semantic data dictionary. Then, based on the semantic data dictionary, a semantic similarity calculation method based on multivariate distance weighting is proposed. Finally, the algorithm is tested and verified. The experimental results show that the method in this paper has a significant effect on automatic data fusion in the construction of industrial digital twins. © The Authors. Published under a Creative Commons Attribution CC-BY 3.0 License.

关键词： Data fusion

来源：评论

学校读者我要写书评

暂无评论

Reexamining Indoor Mobile Robots from a Cognitive Perspective 5

Reexamining Indoor Mobile Robots from a Cognitive Perspectiv...

引用

5th International Conference on robotics and Computer Vision, ICRCV 2023

作者： Song, Fei Li, Jinyu Tang, Fengzhen Tang, Yandong Si, Bailu State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China School of Systems Science Beijing Normal University Beijing China

ISBN: (纸本)9798350326369

The field of traditional mobile robot navigation has undergone a gradual transformation, evolving into a standardized and procedural research domain. Through a fresh cognitive perspective on this navigation process, a bridge emerges between robotic researchers and cognitive neuroscientists, thereby fostering the growth of interdisciplinary exploration. This article meticulously examines three pivotal phases of robot navigation: information acquisition, simultaneous localization and mapping (SLAM), and path planning. These phases are intricately linked to pertinent cognitive research. Furthermore, a comprehensive survey of existing biomimetic and neuromorphic algorithms is presented, highlighting their applications in augmenting robot navigation capabilities. Ultimately, this article charts a visionary course for the future of robot navigation, envisioning its potential in facilitating more intelligent and efficient navigation techniques. © 2023 IEEE.

关键词： Navigation

来源：评论

学校读者我要写书评

暂无评论

Synthesis of Diagnostic Observers for Linear systems Based on Optimal Control Methods

Synthesis of Diagnostic Observers for Linear Systems Based o...

引用

2022 International Conference on Control, automation and Diagnosis, ICCAD 2022

作者： Kabanov, Aleksey A. Zuev, Aleksandr V. Zhirabok, Aleksey N. Filaretov, Vladimir F. Department of Informatics and Control in Technical Systems Sevastopol State University Russia Laboratory of Intelligent Information Systems for Marine Robots Institute of Marine Technology Problems FEB RAS Russia Department of Automation and Robotics Far Eastern Federal University Russia Robotics Laboratory Institute of Automation and Control Processes FEB RAS Russia

ISBN: (数字)9781665497947

ISBN: (纸本)9781665497947

The paper considers the problem of fault identification in dynamic systems described by linear differential equations. To solve this problem, diagnostic observers constructed on the basis of optimal control methods are used. The proposed new method for the synthesis of such observers is based on the idea of introducing a new system with some auxiliary control which plays a role of an unknown vector function describing emerging faults. This control is proposed to be formed in such a way that it provides a minimum for the residual functional. Unlike popular approaches to solving the problem of fault identification based on observers operating in a sliding mode, the proposed method allows us to expand the class of systems for which the identification problem can be solved. It is known that the methods of sliding mode observers design impose certain restrictions on the systems under consideration. The suggested theory is illustrated by an example. The simulation results confirmed the operability of the diagnostic observers synthesized using the method proposed in the work. © 2022 IEEE.

关键词： Linear systems

来源：评论

学校读者我要写书评

暂无评论

A Manta Ray-Inspired Biosyncretic Robot with Stable Controllability by Dynamic Electric Stimulation

引用

Cyborg and Bionic systems 2022年第1期2022卷 314-326页

作者： Chuang Zhang Yiwei Zhang Wenxue Wang Ning Xi Lianqing Liu State Key Laboratory of Robotics Shenyang Inst itute of AutomationChinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China School of Automation and Electrical Engineering Shenyang Ligong University Shenyang 110159China Emerging Technologies Institute Department of Industrial Manufacturing Systems Engineering University of Hong KongPokfulamChina

Biosyncretic robots,which are new nature-based robots in addition to bionic robots,that utilize biological materials to realize their core function,have been supposed to further promote the progress in *** as the main operation mechanism relates to the robotic overall ***,biosyncretic robots actuated by living biological actuators have attracted increasing ***,innovative propelling modes and control methods are still necessary for the further development of controllable motion performance of biosyncretic *** this work,a muscle tissue-based biosyncretic swimmer with a manta *** propelling mode has been *** is more,to improve the stable controllability of the biosyncretic swimmer,a dynamic control method based on circularly distributed multiple electrodes(CDME)has been *** this method,the direction of the electric field generated by the CDME could be real-time controlled to be parallel with the adtuation tissue of the dynamic ***,the instability of the tissue actuation induced by the dynamic included angle between the tissue axis and electric field direction could be ***,the biosyncretic robot has demonstrated stable,controllable,and efective swimming,by adjusting the electric stimulation pulse direction,amplitude,and *** work may be beneficial for not only the development of biosyncretic robots but also other related studies including bionic design of soft robots and muscle tissue engineering.

关键词： Robot robot Dynamic

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：