检索结果-内蒙古大学图书馆

On the common mode current reduction in induction motor fed by three-level NPC inverter for pumping photovoltaic application

引用

International Journal of Power Electronics 2025年第1期21卷 28-45页

作者： Mahmoud, Zouhaira Ben Khedher, Adel LATIS – Laboratory of Advanced Technology and Intelligent Systems Ecole Nationale d’Ingénieurs de Sousse Université de Sousse Sousse4023 Tunisia

The presence of common mode voltage (CMV) poses a significant challenge in motor drive applications. Particularly, for Photovoltaic Pumping (PVP) systems, the high-frequency fluctuations of CMV can induce a common mode current (CMC). These challenges not only diminish the lifespan and the reliability of the motor and PV panel but also present safety problems. This work suggests a novel space vector modulation (SVM) for three level NPC (3L-NPC) converter fed induction machine (IM). The proposed SVM simplifies the 3L space vector diagram (SVD) to six two level (2L) diagrams. The synthesis of the zero voltage vector is then achieved through a virtual approach, combining two active vectors. The principal features of the latter are low complexity, low computation burden, reduced CMV and leakage current with high DC bus utilisation ratio. The feasibility and effectiveness of the suggested SVM scheme is verified through both numerical tests and FPGA-based real time implementation. Copyright © 2025 Inderscience Enterprises Ltd.

关键词： Vectors

来源：评论

学校读者我要写书评

暂无评论

Automatic Control of Magnetic Helical Microrobots Docking with Target Objects in Liquid Environments

引用

Journal of Bionic Engineering 2025年第2期22卷 574-584页

作者： Fu Zhao Haoran Rong Lefeng Wang State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin150080China Key Laboratory of Advanced Manufacturing and Intelligent Technology Ministry of EducationHarbin University of Science and TechnologyHarbin150080China

Bio-inspired magnetic helical microrobots have great potential for biomedical and micromanipulation applications. Precise interaction with objects in liquid environments is an important prerequisite and challenge for helical microrobots to perform various tasks. In this study, an automatic control method is proposed to realize the axial docking of helical microrobots with arbitrarily placed cylindrical objects in liquid environments. The docking process is divided into ascent, approach, alignment, and insertion stages. First, a 3D docking path is planned according to the positions and orientations of the microrobot and the target object. Second, a steering-based 3D path-following controller guides the helical microrobot to rise away from the container bottom and approach the target along the path. Third, based on path design with gravity compensation and steering output limits, alignment of position and orientation can be accomplished simultaneously. Finally, the helical microrobot completes the docking under the rotating magnetic field along the target orientation. Experiments verified the automatic docking of the helical microrobot with static targets, including connecting with micro-shafts and inserting into micro-tubes. The object grasping of a reconfigurable helical microrobot aided by 3D automatic docking was also demonstrated. This method enables precise docking of helical microrobots with objects, which might be used for capture and sampling, in vivo navigation control, and functional assembly of microrobots.

关键词： Magnetic actuation Helical microrobots Visual servo Motion control Docking

来源：评论

学校读者我要写书评

暂无评论

Stability and Stabilization of Sampled-Data Based LFC for Power systems:A Data-Driven Method

引用

IEEE/CAA Journal of Automatica Sinica 2025年第1期12卷 291-293页

作者： Yu-Long Fan Chuan-Ke Zhang Yong He the School of Automation China University of Geosciences the Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems the Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education IEEE

Dear Editor,This letter is concerned with stability analysis and stabilization design for sampled-data based load frequency control(LFC) systems via a data-driven method. By describing the dynamic behavior of LFC systems based on a data-based representation, a stability criterion is derived to obtain the admissible maximum sampling interval(MSI) for a given controller and a design condition of the PI-type controller is further developed to meet the required MSI. Finally, the effectiveness of the proposed methods is verified by a case study.

关键词： Sampled data control systems

来源：评论

学校读者我要写书评

暂无评论

High-energy-density lithium manganese iron phosphate for lithium-ion batteries:Progresses,challenges,and prospects

引用

Journal of Energy Chemistry 2025年第1期100卷 1-17页

作者： Bokun Zhang Xiaoyun Wang Shuai Wang Yan Li Libo Chen Handong Jiao Zhijing Yu Jiguo Tu State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingBeijing 100083China Research Institute for Intelligent Wearable Systems The Hong Kong Polytechnic University Hong Kong 9977China Institute of Advanced Structure Technology Beijing Institute of TechnologyBeijing 100081China

The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion *** manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy *** LiMn_(x)Fe_(1-x)PO_(4)has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap *** review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMn_(x)Fe_(1-x)PO_(4)to analyze reaction processes accurately and guide material ***,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMn_(x)Fe_(1-x)PO_(4),including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology ***,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are *** importantly,it is expected to provide key insights into the development of high-performance and stable LiMn_(x)Fe_(1-x)PO_(4)materials,to achieve practical energy storage requirements.

关键词： Lithiummanganese iron phosphate High energydensity Lithium-ionbatteries Reactionmechanism Tap density

来源：评论

学校读者我要写书评

暂无评论

Noncontact Video-Based Vital Signs Continuous Monitor for Unconstrained Conscious Rodents

引用

IEEE Sensors Journal 2025年第10期25卷 16628-16639页

作者： He, Yuke Gao, Tong Lv, Yong Zhang, Jingjing School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

Animal experiments should minimize pain and discomfort and maximize animal welfare to satisfy the experimental animal 3R principle. The quality of vital signs monitor results collected from conscious and stress-free rodents is superior, ensuring experimental data’s reliability, accuracy, and scientificity. This work proposes a noncontact video-based vital signs continuous monitoring method for unconstrained conscious rodents. First, rodents are tracked using keypoint detection, and regions of interest (ROI) on the rodents are selected based on signal-to-noise ratio (SNR) distribution of vital signs. Second, corner motion within the ROI region is tracked to synthesize skin pulsations, from which respiratory signals are extracted. Finally, a method is proposed to eliminate the influence of respiratory harmonics, thereby removing respiratory interference and extracting the heart rate (HR). Four rats and four mice were used to measure the performance of the proposed method. This work is the first to use a camera to continuously monitor the HR of unrestrained and conscious rodents. Compared with the ground truth [semi-implantable electrocardiogram (ECG)], the relative HR error was 1.86% \pm ~0.82 % and 1.20% \pm ~0.33 % for rats and mice, respectively. This method is used for unconstrained conscious rodents and has high applicability, allowing it to be used in various experimental environments and conditions. At the same time, this work contributes to the development of new methods for continuously and objectively evaluating animal welfare, thereby promoting the development of modern biomedical and ethical research. © 2001-2012 IEEE.

关键词： Invertebrates

来源：评论

学校读者我要写书评

暂无评论

Enhancing rheology and mechanical properties of DLP 3D-printed Si_(3)N_(4) materials via composition optimization and gas-pressure sintering

引用

International Journal of Minerals,Metallurgy and Materials 2025年第5期32卷 1220-1233页

作者： Qing Qin Gang Xiong Lin Han Yujuan Zhang Zhen Shen Changchun Ge Institute of Powder Metallurgy and Advanced Ceramics School of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China State Key Laboratory of Multimodal Artificial Intelligence Systems Beijing Engineering Research Center of Intelligent Systems and TechnologyInstitute of AutomationChinese Academy of SciencesBeijing 100190China

Digital light processing(DLP)is a crucial additive manufacturing(AM)technique for producing high-precision ceramic *** study aims to optimize the formulation of Si_(3)N_(4)slurry to enhance both its performance and manufacturability in the DLP process,and investigate key factors such as particle size distribution,photopolymer resin monomer ratios,and dispersant types to im-prove the slurry’s rheological *** these optimizations,a photosensitive Si_(3)N_(4)slurry with 50vol%solid content was de-veloped,exhibiting excellent stability,and low viscosity(2.48 Pa·s at a shear rate of 12.8 s^(-1)).The effects of gas-pressure sintering on the material’s phase composition,microstructure,and mechanical properties were further explored,revealing that this technique significantly increases the flexural strength of the green sample from(109±10.24)to(618±42.15)*** sintered ceramics exhibited high hard-ness((16.59±0.05)GPa)and improved fracture toughness((4.45±0.03)MPa·m^(1/2)).Crack trajectory analysis revealed that crack deflec-tion,crack bridging,and the pull-out of rod-likeβ-Si_(3)N_(4)grains,are the main toughening mechanisms,which could effectively mitigate crack *** these mechanisms,crack deflection and bridging were particularly influential,significantly enhancing the frac-ture toughness of the Si_(3)N_(4)***,this research highlights how monomer formulation and gas-pressure sintering strengthen the performance of Si_(3)N_(4)slurry in the DLP three-dimensional printing *** work is expected to provide new insights for fabricat-ing complex Si_(3)N_(4)ceramic components with superior mechanical properties.

关键词： additive manufacturing Si_(3)N_(4)slurry low viscosity pressure sintering

来源：评论

学校读者我要写书评

暂无评论

Attention-Modulated Feature Fusion Neural Network for Inverse Modeling of Microwave Filters

引用

IEEE Microwave and Wireless technology Letters 2025年第4期35卷 376-379页

作者： Guo, Linwei Cao, Weihua Hu, Wenkai Lu, Zhengyang Wu, Min China University of Geosciences School of Automation Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

Inverse modeling is extensively applied in the design and tuning of microwave filters (MFs). Inverse models (IMs) take the features extracted from the high-dimensional electromagnetic parameters as input. How to make full use of features from multiple perspective is a critical issue for improving model accuracy. To solve it, this letter proposes an attention-modulated feature fusion neural network (AMFFNN). AMFFNN achieves multiperspective feature fusion (MPFF) at the input side and independent feature fusion (IFF) at the output side. In addition, feature fusion in AMFFNN is enhanced by attention modules to dynamically identify the importance of each feature. Statistical and comparative results of simulations demonstrate that AMFFNN outperforms existing methods in terms of accuracy, stability, and generalization. © 2023 IEEE.

关键词： Inverse problems

来源：评论

学校读者我要写书评

暂无评论

Impact of reduced common mode voltage-PWM techniques on stator winding temperature using reliable thermal model: theoretical and experimental studies

引用

COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering 2025年

作者： Ben Mahmoud, Zouhaira Guenenna, Thouraya Khedher, Adel LATIS- Laboratory of Advanced Technology and Intelligent Systems Ecole Nationale d’Ingénieurs de Sousse Université de Sousse Sousse Tunisia

Purpose: This paper aims to deal with theoretical and experimental studies of the impact of the reduced Common Mode Voltage (CMV)-Pulse Width Modulation (PWM) techniques on stator winding temperature using a reliable thermal model. Design/methodology/approach: To deal with the CMV, reliable PWM algorithms with the reduced CMV and suitable overall performance are developed in this paper. After developing the mathematical model of the proposed electro-thermal approach, the reduced CMV PWM approaches are then evaluated in terms of stator winding temperature impact. The experimental tests are carried out on a two-level voltage source inverter-fed induction machine using a Virtex 5 LX50T field-programmable gate array board. The studied techniques are compared to the conventional one in terms of CMV, leakage current, current total harmonic distortion and stator winding temperature. Moreover, the reliability of the thermal model is proven by numerical and experimental tests. Findings: The simulation and experimental results confirm that the suggested diffusive thermal model shows high reliability in terms of continuous temperature control and perfect concordance with the measured results. Furthermore, when comparing the studied PWM methods in terms of winding temperature, it is concluded that the conventional approach provides the best performance, whereas the active zero state PWM shows a slight temperature reduction in comparison with the near state PWM. On the other hand, it is noted that the important temperature increase is detected on the nondrive side and drive side ends of the stator winding when the stator iron presents the smallest one. Originality/value: Two important issues of induction machine failure, namely, the CMV and the stator winding temperature, are studied. To deal with the CMV issue, two PWM algorithms for CMV reduction are applied and then evaluated in terms of stator winding temperature proposing a reliable electro-thermal model. The thermal manage

关键词： Temperature scales

来源：评论

学校读者我要写书评

暂无评论

Recent advances in photopolymerization 3D printing of alumina-ceramic

引用

Progress in Natural Science:Materials International 2025年第1期35卷 1-30页

作者： M.Irfan Hussain Min Xia XiaoNa Ren Zhen Shen Muhammad Jamil Changchun Ge Institute of Powder Metallurgy and Advanced Ceramics School of Material Science and Engineering University of Science and Technology Beijing State Key Laboratory of Multimodal Artificial Intelligence Systems Beijing Engineering Research Center of Intelligent Systems and Technology Institute of AutomationChinese Academy of Sciences College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and Astronautics

Digital light processing(DLP) 3D printing has a huge potential for manufacturing intricate and customized ceramic parts with high precision and cost-effectiveness. Research in this field contributes to material innovation,opening the avenues for new process designs in both scientific and industrial sectors. However, the implementation of DLP 3D printing technology in ceramic research has not yet reached the maturity level as that in polymer and tissue engineering. Necessarily, a holistic in-depth literature reporting the successful integration of alumina ceramics within DLP 3D printing technology is urgently needed. This review, systematic examines recent progress in DLP technology, focusing on photopolymer resins that incorporate UV-sensitive monomers, photoinitiators, and dispersants, as well as their synergistic effects on achieving high-quality printing, desirable material properties, and enhanced performance. Further, the review discusses key factors including post-processing characteristics such as debinding and sintering, which influence microstructure, and defect formation including microcracks, porosity and voids. Finally, the challenges associated with printing and sintering are highlighted,aiming to identify focused focused development pathways and potential solution to optimize outcomes. This analysis clarifies existing challenges and also propsoes future applications for DLP technology in the aluminaceramic field.

关键词： Al2O3 ceramics Applications Digital light processing (DLP) Post-processing Resin

来源：评论

学校读者我要写书评

暂无评论

Time-Varying Formation Tracking Control of Heterogeneous Multi-Agent systems With Intermittent Communications and Directed Switching Networks

引用

IEEE/CAA Journal of Automatica Sinica 2025年第1期12卷 294-296页

作者： Yuhan Wang Zhuping Wang Hao Zhang Huaicheng Yan the Shanghai Research Institute for Intelligent Autonomous Systems Tongji University the National Key Laboratory of Autonomous Intelligent Unmanned Systems the Frontiers Science Center for Intelligent Autonomous System of Ministry of Education the College of Electronic and Information Engineering the Department of Control Science and Engineering Tongji University the Key Laboratory of Advanced Control and Optimization for Chemical Processes of Ministry of Education the School of Information Science and Engineering East China University of Science and Technology

Dear Editor,This letter is concerned with the problem of time-varying formation tracking for heterogeneous multi-agent systems(MASs) under directed switching networks. For this purpose, our first step is to present so... 详细信息

关键词： Switches Topology Observers Formation control Event detection Switched systems Multi-agent systems Control theory Autonomous systems Stability

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：