检索结果-内蒙古大学图书馆

Seismic performance of fabricated structural system of steel frame-buckling-restrained steel plate shear wall with inclined-slots

引用

Tumu Gongcheng Xuebao/China Civil Engineering Journal 2016年 49卷 32-38页

作者： Peng, Han Jin, Shuangshuang Ou, Jinping Harbin Institute of Technology Harbin150090 China Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology Harbin150090 China

Buckling-restrained steel plate shear wall with inclined slots (simply referred as "slotted SPSW") is a new proposed lateral resistant member. Compared with traditional steel plate shear wall, it has the advantages of more adjustable parameters, stable energy dissipation capacity and good ductility. It can also work as fabricated unit and form fabricated shear wall structure and different fabricated lateral load resisting systems by assembling units. This paper introduces the fabricated structural system of steel frame-slotted SPSW, including the design method of slotted SPSW, fabricated shear wall structure and the design procedure of the structural system. A case of 20-story office building was designed using the structural system and its seismic performance was analyzed under frequent and rare earthquake. The results show that the slotted SPSW can provide high lateral stiffness and dissipate energy thus protecting the main structure, conforming to principle of dual system and showing the structural system exhibits excellent seismic performance. © 2016, Editorial Office of China Civil Engineering Journal. All right reserved.

关键词： Energy dissipation

来源：评论

学校读者我要写书评

暂无评论

Moment modulation design method of reinforced concrete continuous beam with high-strength hot-rolled bar

引用

Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology 2015年第12期47卷 16-20页

作者： Li, Ling Wang, Ying Zheng, Wenzhong Key Lab of Structures Dynamic Behavior and Control Harbin Institute of Technology Ministry of Education Harbin150090 China

392 two-span continuous beams which are used HRB335, HRB400, HRB500 and HRB600 reinforcements are analyzed to investigate the bending moment amplitude modulation rule of concrete continuous beam with high-strength hot-rolled bar. The moment redistribution is investigated in two phases: One is the modulation amplitude βb caused from loading to steel yielding in control section of support. The other is βa caused from formation of a plastic hinge to the crushing of compressive extreme concrete fiber in control section of support. The results indicate that the plastic hinge appears delay and the rotation capacity of plastic hinge decreases, at the same time, the interval from the tensile extreme concrete fiber into the plastic to longitudinal reinforcement yielding ranges longer. The moment amplitude modulation coefficient equation using θp/h0 as the key parameters with a certain intercept βb has been obtained. Practical expression with ξ as independent variable has been proposed to facilitate the engineering applications. © 2015, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.

关键词： Amplitude modulation

来源：评论

学校读者我要写书评

暂无评论

Post-build concrete wing wall reinforce frame corner column seismic performance experimental

引用

Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology 2015年第12期47卷 21-25页

作者： Yang, Fan Zheng, Wenzhong Wang, Ying Key Lab of Structures Dynamic Behavior and Control Harbin Institute of Technology Ministry of Education Harbin150090 China

6 specimens of post-build concrete wing wall located two neighboring faces of corner columns were designed and conducted to study the seismic performance of the post-build concrete wing wall reinforce frame corner column. Three test axial compression ratio including 0.31, 0.36, 0.40 was designated for exiting frame corner columns. HRB400 was used as longitudinal steel bar. The ratio of longitudinal reinforcement was 1.23%, 1.05%, 0.82% and stirrup with HPB300 ratio 0.6%. The results of six specimens under cyclic reversing load show that damage degree of the parallel wing wall away from the corner column was significant, while the corner column and the perpendicular wing wall were damaged lighter. Existing column could resist vertical loads and horizontal seismic actions. The wing walls could bear horizontal seismic action and as an effective dissipation energy component. © 2015, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.

关键词： Energy utilization

来源：评论

学校读者我要写书评

暂无评论

Characterization of frozen soil-cement mixture for berm construction in cold regions

引用

Research in Cold and Arid Regions 2015年第4期7卷 300-306页

作者： HaoLin Yu XinLei Na ZhaoHui Joey Yang Key Lab of Structures and Dynamic Behavior and Control of Ministry of Education School of Civil EngineeringHarbin Institute of Technology Visiting Scholar University of Alaska Anchorage University of Alaska Anchorage

Lagoon berms in western Alaska are difficult to design and build due to limited resources, high cost of construction and materials, and warm permafrost conditions. This paper explores methods to treat locally available frozen materials and use them for berm construction. The goal is to find an optimized mix ratio for cement and additives that can be effective in increasing the strength and decreasing the thaw settlement of an ice-rich frozen silty soil. Soil of similar type and ice content to the permafrost found at a project site in Eek, Alaska is prepared in a cold room. The frozen soil is pulverized and cement, additives and fibers are added to the samples for enhancing shear strength and controlling thaw settlement. Thaw settlement and direct shear tests are performed to assess strength and settlement characteristics. This paper presents a sample preparation method, data from thaw settlement and direct shear tests, and analyses of the test results and preliminary conclusions.

关键词： frozen soil stabilization thaw settlement shear strength Portland cement

来源：评论

学校读者我要写书评

暂无评论

Study on effects of the near fault large pulse-type ground motion on the seismic dynamic performance of space truss and its simplified model

引用

Tumu Gongcheng Xuebao/China Civil Engineering Journal 2016年 49卷 37-42页

作者： Sun, Menghan Fan, Feng Zhi, Xudong Key Lab of Structures Dynamic Behavior and Control Ministry of Education Harbin Institute of Technology Harbin150090 China School of Civil Engineering Harbin Institute of Technology Harbin150090 China

This article focuses on the research of seismic response character of common space truss under the impact of the pulse-type ground motion, and some meaningful results listed below have been obtained: (1) In order to apply the method in the construction designing, a simplified spring-mass-damping system is put forward through the theoretical derivation and numerical simulation, which could consider the effects of bending and shearing. This system can replace the supporting structures and participate in the coupling reaction with space truss. (2) The character of near fault large pulse-type ground motion is simply explained. The differences of the seismic response are compared between the pulse-type ground motions and the non-pulse-type ground motion of the peak (0.10 g) acting on the same space truss. The correlation of the big pulse velocity spectrum and structure natural period of structure response is discussed. (3) The responses of the simplified model and the actual model under the impact of the ground motions are analyzed and compared. The result shows the reasonableness and accuracy of the simplified model. The research could provide a scientific and simplified model for the designers. © 2016, Editorial Office of China Civil Engineering Journal. All right reserved.

关键词： Seismic response

来源：评论

学校读者我要写书评

暂无评论

封闭式鞍形张拉膜模型风致气弹响应研究（英文）

引用

Journal of Zhejiang University-Science A(Applied Physics & Engineering) 2015年第8期16卷 656-668页

作者： Yue WU Zhao-qing CHEN Xiao-ying SUN Key Laboratory of Structures Dynamic Behavior and Control of Ministry of Education Harbin Institute of Technology Electric Power Research Institute Henan Electric Power Company

目的:明确张拉膜结构风致气弹响应特征及气弹失稳机理。,创新点:1.采用无接触测量技术设计鞍形张拉膜结构气弹模型风洞试验;2.研究鞍形张拉膜结构的气弹响应特征;3.给出鞍形张拉膜结构的失稳机理。方法:1.在风洞中测量两个形状相同但预... 详细信息

目的:明确张拉膜结构风致气弹响应特征及气弹失稳机理。,创新点:1.采用无接触测量技术设计鞍形张拉膜结构气弹模型风洞试验;2.研究鞍形张拉膜结构的气弹响应特征;3.给出鞍形张拉膜结构的失稳机理。方法:1.在风洞中测量两个形状相同但预张力不同的封闭式鞍形张拉膜结构气弹模型在不同风速下的均匀流中的位移响应及膜面上方不同高度的风速时程;2.通过对位移响应及风速时程进行,分析,明确结构的响应随风速变化特征及气弹失稳原因。.结论:1.膜结构在风荷载作用下变形到平衡位置,并.围绕该平衡位置以特定振幅进行振动;2.大部分风向角下,多个模态被激发,结构振幅及各阶模态阻尼比随风速增大而逐渐增大;3.特定风向角下,只有单阶模态被激发;低风速下,结构振幅和模态阻尼比随风速增大而缓慢增大;超过一定风速后,结构发生涡激共振引起的气弹失稳,振幅随风速增大开始迅速增大,达到不发生涡激共振时的2–4倍,结构阻尼比随风速增大发生迅速衰减;随着风速的继续增大,结构振动中可能出现其他模态的气弹失稳;4.结构前两阶模态的无量纲气弹失稳临界风速约为0.8–1.0。

关键词：膜结构风致响应气弹失稳气弹模型涡激共振

来源：评论

学校读者我要写书评

暂无评论

Vibration characteristics of frozen soil under moving track loads

引用

Research in Cold and Arid Regions 2015年第4期7卷 414-420页

作者： AiPing Tang AnPing Zhao AiHua Wen Key Lab of Structures Dynamic Behavior and Control (Harbin Institute of Technology) Ministry of Education School of Civil Engineering Heilongjiang University China Academy of Architecture and Building School of Science Harbin Institute of Technology

Vibration due to moving traffic loads is an important factor which induces frozen soil damage; this paper analyzed these vibration characteristics of frozen soil foundation under track loads. Firstly, seismic observation array （SOA） technology was applied to monitor the three dimensional dynamic characteristics of frozen soil under movable track load in a per- mafrost region and seasonal frozen soil area. Secondly, a numerical simulation for the response of frozen soil under movable track load was performed based on finite element analysis （FEA）, The results show that dynamic characteristics of frozen soil in perpendicular and parallel direction of the track are obviously different. In the direction perpendicular to the track, the vertical acceleration amplitude had an abrupt increase in the 9-10 m from the track line. In the direction parallel to the track, the acceleration in vertical and horizontal direction had a quick attenuation compared to the other direction. Lastly, various parameters were analyzed for the purpose of controlling the dynamic response of frozen soil and the vibration attenuation in frozen soil layer.

关键词： moving track load dynamic response seismic observation array （SOA） permafrost seasonal frozen soil

来源：评论

学校读者我要写书评

暂无评论

Literature review of reactive powder concrete

引用

Jianzhu Jiegou Xuebao/Journal of Building structures 2015年第10期36卷 44-58页

作者： Zheng, Wenzhong Lv, Xueyuan Key Laboratory of Structures Dynamic Behavior and Control of China Ministry of Education Harbin Institute of Technology Harbin150090 China

This paper introduces the proportioning principles and technology of reactive powder concrete (RPC), and then summarizes RPC durability and high temperature resistance. It is found that in the calculation of bond-anchorage length, the appearance coefficient of steel bar is higher in RPC than in ordinary concrete. The flexural cracking strain of RPC beam is 705×10-6-864×10-6, higher than that of ordinary concrete beam, which is 80×10-6-120×10-6. The normal section limit compressive strain of RPC beam is 4 100×10-6-5500×10-6, higher than that of ordinary concrete beam, which is 3300×10-6. The plastic influence coefficient for sectional resisting moment of RPC beam increases with the longitudinal reinforcement ratio;the test value of inclined section shearing load-bearing capacity is lower than the calculated value due to lack of coarse aggregate interlock effect on both sides of inclined cracks in RPC beam. Compared with ordinary concrete, RPC possesses excellent performance of chloride ion permeability resistance, carbonation resistance, frost thawing resistance and sulfate resistance;RPC mixed with fiber appropriately can prevent thermal spalling effectively. Finally, this paper briefly introduces the pilot projects of RPC and manifested its broad application prospects. ©, 2015, Science Press. All right reserved.

关键词： Durability

来源：评论

学校读者我要写书评

暂无评论

Flexural behaviour of precast, prestressed ribbed RPC bottom panels

引用

Open Civil Engineering Journal 2015年第1期9卷 535-543页

作者： Wenzhong, Zheng Xueyuan, Lu Ying, Wang Key Lab of Structures Dynamic Behavior and Control of the Ministry Education Harbin Institute of Technology Harbin150090 China

This study introduces a new type of precast, prestressed reactive powder concrete (RPC) bottom panel for a large-span composite slab. The bottom panels, which have one or two inverted ribs with openings, act as formwork during the construction stage. The paper experimentally investigated the crack characteristics, deflection, and normal section bearing capacity of four precast, prestressed ribbed RPC bottom panels under flexural load. The results indicated that the RPC ultimate strain under non-uniform compression is 5500×10-6and the plastic influence coefficient of the section modulus is linear with the longitudinal reinforcement ratio. The tensile stress of RPC at the cracked section should be considered while calculating the flexural stiffness;the equation used to determine the nominal tensile stress of RPC as a major variable for calculating the crack width at the bottom of panels was proposed. The bottom panels generally exhibit an over-reinforced failure mode behaviour without the composite layer;the calculation method of the normal section bearing capacity of this mode was established. © Wenzhong et al.

关键词： Bearing capacity

来源：评论

学校读者我要写书评

暂无评论

Lattice Modelling of Chloride Diffusivity of Hardened Cement Paste

Lattice Modelling of Chloride Diffusivity of Hardened Cement...

引用

The 14th International Congress on the Chemistry of Cement（ICCC 2015）

作者： Hongzhi Zhang Xinchun Guan Jinping Ou Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology

Based on numerical micro-structure model of cement paste,a lattice diffusion model is generated to study the influence of randomness on the chloride diffusion coefficient of capillary pore *** results indicate that,compared with regular model,random model has longer diffusion distance,consequently,in order to get same simulation diffusion results,the former's diffusion coefficient should be adjusted a lttlte *** Lattice models have been used in fracture mechanics of cement-based materials for a long ***,the use of lattice models has been extended on simulating chloride transport processes in this *** of the transport models focus on simulation method and process,but the difference of simulated results caused by randomness is generally *** this paper,a lattice diffusion model is generated to study the influence of randomness on the chloride diffusion coefficient of capillary pore element,the reason that different simulation method has different results is also found.

关键词： durability micro-scale lattice model chloride diffusion

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：