检索结果-内蒙古大学图书馆

Isolation research of friction pendulum bearings in K8 single-layer reticulated domes

Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology 2015年第12期47卷 9-15页

作者： Kong, Dewen Fan, Feng Zhi, Xudong Key Lab of Structures Dynamic Behavior and Control Harbin Institute of Technology Ministry of Education Harbin150090 China School of Civil Engineering Harbin Institute of Technology Harbin150090 China

To obtain the seismic performance of single-layer reticulated domes with friction pendulum bearings (FPB), finite element refined models of FPB were applied to 80 m K8 single-layer reticulated domes FE Model. The same earthquake waves were exerted to single-layer reticulated shells with hinge support or FPB. The isolation effect of FPBs was analyzed in two main aspects including the dynamic responses of bars and nodes of reticulated domes, and the impact of FPB parameters on the seismic response of single layer latticed shell were discussed. The results indicate that the optimal friction coefficient of FPB increases with the increase of the ground motion intensity. The bigger curvature radius of FPB, the smaller seismic responses of reticulated shell structure will be. On the basis of the above research, this paper gave some discussion how friction pendulum bearings were selected for single-layer reticulated domes. © 2015, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.

关键词： Friction

来源：评论

学校读者我要写书评

暂无评论

Temperature and electric-field induced phase transitions, and full tensor properties of C-poled domain-engineered tetragonal 0.63Pb(Mg1/3Nb2/3)−0.37PbTiO3 single crystals

引用

Physical Review B 2016年第9期93卷 094104-094104页

作者： Limei Zheng Yujia Jing Xiaoyan Lu Ruixue Wang Gang Liu Weiming Lü Rui Zhang Wenwu Cao Condensed Matter Science and Technology Institute Harbin Institute of Technology Harbin 150080 China Key Laboratory of Structures Dynamic Behavior and Control of the Ministry of Education School of Civil Engineering Harbin Institute of Technology Harbin 150001 China Center for High Pressure Science and Technology Advanced Research Shanghai 201203 China Department of Mathematics Materials Research Institute The Pennsylvania State University University Park Pennsylvania 16802 USA

The phase-transition sequence of 0.67Pb(Mg1/3Nb2/3)−0.37PbTiO3 (PMN-0.37PT) single crystals driven by the electric (E) field and temperature is comprehensively studied. Based on the strain-E field loop, polarization-E field loop, and the evolution of domain configurations, the E field along the [011]C induced phase transitions have been confirmed to be as follows: tetragonal (T) → monoclinic (MC)→ single domain orthorhombic (O) phase. As the E field decreases, the induced O phase cannot be maintained and transformed to the MC phase, then to the coexistence state of MC and T phases. In addition, the complete sets of dielectric, piezoelectric, and elastic constants for the [011]C-poled domain-engineered PMN-0.37PT single crystal were measured at room temperature, which show high longitudinal dielectric, piezoelectric, and electromechanical properties (ɛ33T=10661,d33=1052pC/N, and k33=0.766). Our results revealed that the MC phase plays an important role in the high electromechanical properties of this domain-engineered single crystal. The temperature dependence of the domain configuration revealed that the volume fraction of the MC phase decreases with temperature accompanied by the reduction of ɛ33T,d31, and k31 due to the substantially smaller intrinsic properties of the T phase.

关键词： Electric polarization Ferroelectricity Phase transitions Piezoelectricity Ferroelectrics Piezoelectrics Relaxor ferroelectrics Polarization

来源：评论

学校读者我要写书评

暂无评论

Axial compression performances of concrete filled flax-basalt hybrid fibers reinforced FRP tubes 12

Axial compression performances of concrete filled flax-basal...

引用

Joint Conference of the 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete structures, FRPRCS 2015 and the 5th Asia-Pacific Conference on Fiber Reinforced Polymers in structures, APFIS 2015

作者： Xia, Yuanyuan Xian, Guijun Li, Hui Key Lab. of Structural Dynamic Behavior and Control Harbin Institute of Technology Ministry of Education Harbin150090 China School of Civil Engineering Harbin Institute of Technology Harbin150090 China

Flax fiber reinforced polymer (FFRP) composites could be used in civil engineering as structural materials. To improve the mechanical properties and durability of FFRP, flax-basalt hybrid fiber reinforced polymer (HFRP) composite was developed. In the present study, unidirectional HFRP tubes were prepared with a winding process, and the compression performances of the concrete filled HFRP tubes were investigated. HFRP coupon was prepared and tested in tensile properties. The tensile results of the HFRP plate coupons shows linear in stress-strain, and hybrid with basalt fiber enhances the elongation at break remarkably. The tensile strength and modulus of the HFRP follow the rule of mixture. The concrete filled HFRP tubes exhibited much improved ultimate strength and ductility compared to those with the flax fiber tubes. The axial compression stress-strain curves were analyzed with the existing models. The coefficients of confinement of HFRP were higher than those of glass or carbon fiber based FRPs. © APFIS 2015. All rights reserved.

关键词： Fiber reinforced plastics

来源：评论

学校读者我要写书评

暂无评论

Numerical simulations of shake-table experiment for dynamic soil-pile-structure interaction in liquefi able soils

引用

Earthquake Engineering and Engineering Vibration 2014年第1期13卷 171-180页

作者： Tang Liang Baydaa Hussain Maula Ling Xianzhang Su Lei Key Lab of Structures Dynamic Behavior and Control(Harbin Institute of Technology) Ministry of Education School of Civil Engineering Harbin Institute of Technology

A shake-table experiment on pile foundations in liquefi able soils composed of liquefi able sand and overlying soft clay is studied. A three-dimensional(3D) effective stress fi nite element(FE) analysis is employed to simulate the experiment. A recently developed multi-surface elasto-plastic constitutive model and a fully coupled dynamic inelastic FE formulation(u-p) are used to model the liquefaction behavior of the sand. The soil domains are discretized using a solid-fl uid fully coupled(u-p) 20-8 noded brick element. The pile is simulated using beam-column elements. Upon careful calibration, very good agreement is obtained between the computed and the measured dynamic behavior of the ground and the pile. A parametric analysis is also conducted on the model to investigate the effect of pile-pinning, pile diameter, pile stiffness, ground inclination angle, superstructure mass and pile head restraints on the ground improvement. It is found that the pile foundation has a noticeable pinning effect that reduces the lateral soil displacement. It is observed that a larger pile diameter and fi xed pile head restraints contribute to decreasing the lateral pile deformation; however, a higher ground inclination angle tends to increase the lateral pile head displacements and pile stiffness, and superstructure mass seems to effectively infl uence the lateral pile displacements.

关键词： liquefaction pile pinning soil improvement pile deformation earthquake nonlinear fi nite element method shake-table experiment

来源：评论

学校读者我要写书评

暂无评论

Response of a pile group behind quay wall to liquefaction-induced lateral spreading:a shake-table investigation

引用

Earthquake Engineering and Engineering Vibration 2014年第4期13卷 741-749页

作者： Tang Liang Zhang Xiaoyu Ling Xianzhang Su Lei Liu Chunhui School of Civil Engineering Harbin Institute of Technology Key lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology

The response of pile foundations near a quay wall under liquefaction-induced lateral spreading remains a complex problem. This study presents the results of a shake-table test on a 2×2 pile group behind a sheet-pile quay wall that was subjected to lateral spreading. The quay wall was employed to trigger liquefaction-induced large lateral ground deformation. The discussions focus on the behavior of the pile and the soil and on the bending moment distributions within the group pile and the restoring force characteristics at the superstructure. Overall, the piles exhibited apparent pinning effects that reduced soil deformation. In addition, the rear-row piles near the quay wall experienced larger bending moments than did the front-row piles, indicating significant pile group effects. The tests showed that lateral spreading could be a primary cause of larger monotonic deformations and bending moments. It can also be concluded that the monotonic bending moments were significantly decreased due to the presence of slow soil flow. The stiffness at the superstructure was reduced because of accumulated excess pore pressure before liquefaction, and it was recovered during lateral spreading. The present study further enhances current understanding of the behavior of low-cap pile foundations under lateral spreading.

关键词： lateral spreading liquefaction pile group behavior shake-table experiment

来源：评论

学校读者我要写书评

暂无评论

Effect of glass fiber fabrics isolation layer on the adhesion bond behaviours between CFRP plates and steel substrates 12

Effect of glass fiber fabrics isolation layer on the adhesio...

引用

作者： He, Jun Xian, Guijun Li, Hui Key Lab. of Structural Dynamic Behavior and Control Harbin Institute of Technology Ministry of Education Heilongjiang Harbin150090 China School of Civil Engineering Harbin Institute of Technology Heilongjiang Harbin150090 China

Strengthening of steel structures with adhesively bonded carbon fiber-reinforced polymer (CFRP) plates has received extensive attentions in recent years. Since galvanic corrosion occurs between CFRP and the steel, glass fiber fabrics (GFF) are generally applied as an isolation layer. The present paper studied the effects of GFF on the bonding performances (such as ultimate strength and bond-slip relationship) between the CFRP and steel substrates. A series of pull-off tests were performed with variables of the thickness of the GFF layer. The testing results shows that the failure mode is the CFRP plate delamination failure, rather than cohesive failure. Based on this failure mode, the bondslip relationship curves is also trapezoidal shape for ductile adhesive and the thickness of the GFF isolation layer has no influence on the bonding performances. © APFIS 2015. All rights reserved.

关键词： Plates (structural components)

来源：评论

学校读者我要写书评

暂无评论

Shape optimization based on ANSYS

引用

Journal of Information and Computational Science 2015年第11期12卷 4291-4297页

作者： Cui, Guoyong Cui, Changyu School of Civil Engineering Harbin Institute of Technology Harbin China Key Lab of Structures Dynamic Behavior and Control of China Ministry of Education Harbin Institute of Technology Harbin China

ANSYS has been used for structural analysis as mature finite element analysis software. This paper presents a shape optimization method which treats the ANSYS software as subroutines, therefore, eliminating the onerous compiling finite element programs and the complex theoretical derivation. The difference method sacrifices some calculation accuracy when calculating the partial differential, but it can optimize the more complex and practical problems. If the increment is small enough when calculated the partial differential, the precision can be guaranteed. Shape optimization of free-form surface is presented with the strain energy and the buckling load as objective function and optimum program complied in FORTRAN language. Studies shows that the present method is simple and effective which can be used for arbitrary structure shape optimization the average and maximum stress, the average and maximum displacement are reduced with the decrease of the strain energy and the increase of the buckling load;The ultimate strength has a large increase after optimization with considering material non-linearity and geometrical non-linearity. ©, 2015, Binary Information Press. All right reserved.

关键词： Shape optimization

来源：评论

学校读者我要写书评

暂无评论

Ultrasonic guided waves sensing using optical fiber sensor 7

Ultrasonic guided waves sensing using optical fiber sensor

引用

7th International Conference on Structural Health Monitoring of Intelligent Infrastructure, SHMII 2015

作者： Zhou, W. Li, H. Dong, Y. Wang, A. Key Lab. of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology Harbin150090 China School of Civil Engineering Harbin Institute of Technology Harbin150090 China National Key Laboratory of Science and Technology on Tunable Laser Harbin Institute of Technology Harbin150001 China

Optical fiber sensors have been proven that they have potential as ultrasonic guided waves sensor for structural health monitoring and damage detection. They can be used to receive acoustic emission signals from dynamic structural damages or guided waves propagating in waveguide and excited by ultrasonic actuators. Optical fiber sensors based on Mach-Zehnder interferometer were investigated in this work. Their sensing properties were explored experimentally using Lamb waves excited by a piezoelectric wafer in an aluminum plate. Spiral shape with different size was selected to increase their sensitivity. Experiments were also conducted to examine the voltage responses received by this type of sensor, and investigate results of tuning frequency. © 2015, International Society for Structural Health Monitoring of Intelligent Infrastructure, ISHMII. All rights reserved.

关键词： Structural health monitoring

来源：评论

学校读者我要写书评

暂无评论

Study on the effect of the strength grade on the creep behavior of concrete

引用

Open Civil Engineering Journal 2015年第1期9卷 881-887页

作者： Wenzhong, Zheng Can, Tang School of Civil Engineering Harbin Institute of Technology Harbin Heilongjiang150090 China Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology Harbin Heilongjiang150090 China

The internal factors which influenced the concrete creep behavior have been mostly divided by the creep model at home and abroad, but the computing is complex. In order to directly use the creep model in engineering conveniently, it is necessary to consider the effect of concrete strength grade on concrete creep. 302 creep test data with a loading age of 28 d, a lasting age of 360 d, and meet certain environmental conditions were collected. The strength of prism with different aspect ratio and high ratio of cylinder specimen was equivalent to the standard cube strength. The relationship between the creep compliance and creep degree and the cube compressive strength of concrete was fitted, and influence coefficient of the strength grade on the creep degree and creep coefficient were obtained. The influence coefficient can be used to determine creep value, creep coefficient, creep degree of concrete. In this paper, the effect of the strength grade on creep was considered directly, which involves the cube compressive strength of concrete from 15 MPa to 180MPa. The research results can be used in broad scope and has certain practical value.. © 2015, Wenzhong and Can;Licensee Bentham Open.

关键词： Creep

来源：评论

学校读者我要写书评

暂无评论

Bond behavior between basalt fiber reinforced polymer sheet and concrete substrate: Effects of elevated temperatures and sustained load 12

Bond behavior between basalt fiber reinforced polymer sheet ...

引用

作者： Lu, Zhongyu Xian, Guijun Li, Hui Ueda, Tamon Key Lab. of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology Harbin150090 China School of Civil Engineering Harbin Institute of Technology Harbin150090 China Division of Engineering and Policy for Sustainable Environment Faculty of Engineering Hokkaido University Kita 13 Jo Nishi 8 Chome Kita-ku Sapporo060-8628 Japan

This paper presents the effects of elevated temperatures and sustained load on the bond behavior between basalt fiber reinforced polymer sheet and concrete substrate. Three test replicates were performed through a single lap shear bond test. The temperatures were ranging from room temperature to 60 °C with the interval of 10 °C, and the sustained load was set as 35% peak load of the control specimens. Specimens with sustained load were exposed to elevated temperatures up to 3 h, and the failure test was performed at the elevated temperatures. Sustained load at elevated temperatures shows a significant effect on the bonding behavior. The specimens exposed at 30, 40, 50 and 60 °C increased the peak load by 9.6%, 31.2%, 29.6% and 20.2%, respectively. It was recognized that the shear stress redistributed at the concrete-BFRP interfaces during the test. The failure mode changed from concrete cohesion to adhesive failure with the increase of the temperatures. The variation of the failure patterns is attributed to the softening of the adhesion bond at elevated temperatures. © APFIS 2015. All rights reserved.

关键词： Fibers

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：