检索结果-内蒙古大学图书馆

Substation-dispatch center two-level distributed state estimation

Dianli Xitong Zidonghua/Automation of Electric Power systems 2012年第7期36卷 44-50+91页

作者： Li, Qingxin Sun, Hongbin Wang, Jing Zhang, Boming Wu, Wenchuan Guo, Qinglai State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Department of Electrical Engineering Tsinghua University Beijing 100084 China

A two-level distributed state estimation method for substation-dispatch center is proposed. After zero impedance three-phase state estimation based on KCL has been applied in substation, up load ripe data are treated in dispatch center level and the single-phase state estimation for all grid implemented. The detailed discussions about the architecture, algorithm, ripe data transmission, time setting and period selection, transmission protocol and transition scheme for the method are given. The results of calculation example show that this method is in favor of simultaneously identifying three-phase bad data and topology error, reducing communication burden, and increasing the reliability of the dispatch center state estimation for all grid. © 2012 State Grid Electric Power Research Institute Press.

关键词： State estimation

来源：评论

学校读者我要写书评

暂无评论

Equivalent capacity of the lower voltage ride through for wind farm from overcurrent protection in power collection lines

Equivalent capacity of the lower voltage ride through for wi...

引用

11th IET International Conference on Developments in Power systems Protection, DPSP 2012

作者： Wang, Bin Dong, Xinzhou Bo, Zhiqian State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China Alstom Grid Stafford ST17 4LX United Kingdom

ISBN: (纸本)9781849196208

Magnitude and duration of voltage sags are the most important two factors to the Lower Voltage Ride Through (LVRT) capacity of the wind generator. Since most voltage sags are caused by the system faults, and sag durations are controlled by the tripping time of overcurrent relay in power collection lines based on the sags' magnitude. The specification of the LVRT capacity of wind generator is introduced into the operation characteristics of the relay in power collection lines. The evaluation model of equivalent LVRT capacity to overcurrent protection is proposed in paper, and the equivalent LVRT capacities from zone I and zone II relay are quantified. Improvement measures are also proposed.

关键词： Overcurrent protection

来源：评论

学校读者我要写书评

暂无评论

Application and benefit analysis of substation state estimation

引用

Dianli Xitong Baohu yu Kongzhi/Power System Protection and control 2012年第12期40卷 56-61页

作者： Li, Qing-Xin Wang, De-Xing Sun, Hong-Bin Wu, Wen-Chuan Wang, Jing Guo, Qing-Lai Zhang, Bo-Ming State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Beijing 100084 China East China Electric Power Dispatch and Control Sub-Center East China Grid Company Limited Shanghai 200002 China

A substation three-phase nonlinear state estimation method based on zero impedance branches helps to identify topology and analogy errors at substation level and accordingly enhances the control center's state estimation reliability and accuracy. Some issues during the practical implementation process of the technology are reported, such as the hardware configuration, measurement integration, the communication between substation and control center, time setting and period selection. The benefits of the proposed technology have also been analyzed. It is shown that this technology has high reliability and low burden on communication, and improves the ability of monitoring of power grids and the reliability of the real-time power network model significantly. The proposed technology is verified effective by both simulation experiments and field-site applications in East China Power Grid, and is well qualified for real-time online applications, which has broad popularization and application prospects.

关键词： State estimation

来源：评论

学校读者我要写书评

暂无评论

A comprehensive rule based method for substation topology error identification

引用

Dianwang Jishu/Power System Technology 2012年第5期36卷 166-172页

作者： Wang, Jing Ge, Minhui Sun, Hongbin Li, Qingxin Wu, Wenchuan Guo, Qinglai Zhang, Boming State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China East China Electric Power Dispatch and Control Sub-Center East China Grid Company Limited Huangpu District Shanghai 200002 China

A substation topology error identification method based on comprehensive rules, including rules in different spatial scales such as element level, bay level and voltage level as well as rules in time sequence, is presented. Utilizing the superiority in multi-source, redundancy and rapid measurement in the substation, the multi spatial scale relevant rules of element, bay and voltage level as well as multi time sequence rules are proposed, and concrete implementation approach for such a method is given. The proposed method can improve the ability to identify the topology error, especially ability to identify switches without analog measurement, thus more reliable topological structure can be provided to control centre to improve the reliability of state estimation for the whole power system. Results of simulation and practical application show that the proposed method is effective.

关键词： Topology

来源：评论

学校读者我要写书评

暂无评论

Frequency dependent network equivalent based electromagnetic and electromechanical decoupled hybrid simulation

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2012年第16期32卷 107-114页

作者： Zhang, Yi Wu, Wenchuan Zhang, Boming Gole, Aniruddha M. State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China Department of Electrical and Computer Engineering University of Manitoba Winnipeg R3T 5V6 Canada

Neither electromechanical transient stability analysis (TSA) program nor electromagnetic transient (EMT) programs can be used individually for the transient stability studies of the large scale AC/DC systems. This paper presented an electromagnetic and electromechanical hybrid simulation system, based on a frequency dependent network equivalent. Firstly, the framework and the main modules of the proposed hybrid simulation system were introduced. Secondly, the methods to calculate the equivalents of the electromagnetic side and the electromechanical side were introduced. The discussion on the difference between the traditional method and frequency dependent network equivalent (FDNE) and the flowchart of the hybrid simulation were also given. In the last part of the paper, AC system and AC-DC hybrid system are both used as examples to demonstrate the accuracy of the proposed hybrid simulation system's simulation results. © 2012 Chinese Society for Electrical Engineering.

关键词： Hybrid systems

来源：评论

学校读者我要写书评

暂无评论

Positive-sequence component based three-phase unbalanced power flow solution for distribution system with PV nodes

引用

Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering 2012年第1期32卷 115-121页

作者： Li, Hongwei Sun, Hongbin Zhang, An'an Liu, Qingyou State Key Laboratory of Oil and Gas Reservoirs Geology and Exploitation Southwest Petroleum University Chengdu 610500 Sichuan Province China State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China

The traditional power flow methods aren't appropriate to the electrical distribution systems with distributed generators (DG). Therefore, a direct unbalanced three-phase power flow algorithm was presented in this paper. The proposed approach which was developed based on the path matrix, utilized the special topological structure of distribution systems and established the incident matrix of node voltages and injection currents. Based on the assumption that the positive-sequence voltage magnitudes of PV nodes are invariable, the relation of reactive power and compensation voltage for the PV nodes had been derived by the positivesequence component and path matrix. As a result, a new approach handling PV nodes of DG had been proposed and could be integrated into the proposed power flow method. It needn't introduce any additional active power at PV nodes and kept the positive-sequence voltage magnitudes on their scheduled values, considering that reactive power limits were not violated. The results of the 6-bus and the 69-bus test systems verified the validity and universality of the proposed methods. © 2012 Chin. Soc. for Elec. Eng.

关键词： Reactive power

来源：评论

学校读者我要写书评

暂无评论

simulation and 3D visualization of oil spill on the sea

Simulation and 3D visualization of oil spill on the sea

引用

IEEE International Symposium on VR Innovation

作者： Yu, Feng Yin, Yong Dalian Maritime University Navigation Dynamic Simulation and Control Lab. Science Hall 303 1 Linghai Road Dalian 116026 China

ISBN: (纸本)9781457700538

For perfecting the oil spill simulation view system of marine search and rescue simulator, based on the tidal current numerical calculation, considering oil movement mathematical models, designing a collision detection algorithm between oil and island, using texture rendering and plane refraction technologies of Open Scene Graph, finally the simulation and 3D visualization of oil spill on the sea are realized in real-time. The visualization effects are realistic. This algorithm has a practical value for predicting the trajectory of offshore oil spill. © 2011 IEEE.

关键词： Oil spills

来源：评论

学校读者我要写书评

暂无评论

Applicable range analysis of optimized single-terminal fault location algorithm

Applicable range analysis of optimized single-terminal fault...

引用

2011 International Conference on Advanced Power System Automation and Protection, APAP 2011

作者： Huang, Tian-Xiao Dong, Xin-Zhou Shi, Shen-Xing Wang, Bin State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China

ISBN: (纸本)9781424496198

Impedance method and single terminal travelling wave method are analyzed in paper, applicable scope of optimized solution is presented. Impedance method is of high robustness but low accuracy. Single terminal travelling wave method offers high accuracy but poor robustness. Optimized solution combines these two methods together, takes advantages of both methods. It is a great enhancement to single terminal fault location. This paper analyzed theoretical basis of optimized solution, proposed the calculation algorithm of fault location range using impedance method. Analyses of impedance method and single terminal travelling wave method show that the optimized solution is suitable for engineering application. Error analysis is proved correct by simulation. © 2011 IEEE.

关键词： Location

来源：评论

学校读者我要写书评

暂无评论

Single phase grounding fault location based on frequency domain characteristics of fault current

Single phase grounding fault location based on frequency dom...

引用

2011 International Conference on Advanced Power System Automation and Protection, APAP 2011

作者： Jiang, Bo Shi, Shenxing Dong, Xinzhou Wang, Bin State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China

ISBN: (纸本)9781424496198

This paper studies the fault current frequency spectrum characteristics of single phase ground fault in ungrounded distribution networks, and the fault location method based on it. Firstly, it analyzes the production mechanism of 2nd major frequency component, and the relationship between the 2nd major frequency component and series resonance frequency of the faulted line. Secondly, from the perspectives of lumped-parameter circuit, the relationship between 2nd major frequency component and fault location is deduced. simulation cases are used to confirm the relationship. Last, the impact of load and initial fault phase angle on the 2nd major frequency component are researched. simulation research proves the feasibility of the fault detection and location method based on frequency domain characteristics. © 2011 IEEE.

关键词： Electric fault location

来源：评论

学校读者我要写书评

暂无评论

Research on the process of power flow transferring and its identification method

Research on the process of power flow transferring and its i...

引用

2011 International Conference on Advanced Power System Automation and Protection, APAP 2011

作者： Liu, Kun Dong, Xinzhou Wang, Bin Shi, Shenxing State Key Lab. of Control and Simulation of Power Systems and Generation Equipments Dept. of Electrical Engineering Tsinghua University Haidian District Beijing 100084 China

ISBN: (纸本)9781424496198

This paper analyzes the general process of power flow transferring and divides it into four parts: 1) the process of first phase selection after fault occurs;2) the process of selective action at the first time;3) the process of second phase selection and status confirmation;4) the process after status confirmation. It points out that the issue of asymmetrical flow transferring is a critical process which must be put emphasis on. Then it proposes a method to identify this process, and discuss different solution methods. © 2011 IEEE.

关键词： Electric load flow

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：