检索结果-内蒙古大学图书馆

3rd International Workshop on intelligent systems, IWIS 2023

作者： Jiang, Ruoyu She, Jinhua School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China School of Engineering Tokyo University of Technology Tokyo192-0982 Japan

ISBN: (纸本)9798350305043

This paper presents a high-precision control method based on the model-following control (MFC) and equivalent-input-disturbance (EID) approaches. The MFC approach ensures that the output of the plant tracks the output of a desired nominal model. The EID estimates and eliminates an external disturbance. The combination of these two methods effectively achieves high-precision tracking. The validity of this method is demonstrated by a vibration-suppression example through simulations. © 2023 IEEE.

关键词： Equivalent-input-disturbance model-following control vibration suppression

来源：评论

学校读者我要写书评

暂无评论

Improving Motor Imagery Classification in BCI systems Using EMD and Multi-Layer CNNs 14

Improving Motor Imagery Classification in BCI Systems Using ...

引用

14th International Conference on Computer and Knowledge Engineering, ICCKE 2024

作者： Arghand, Reza Chaibakhsh, Ali Radman, Moein University of Guilan Intelligent Systems and Advanced Control Lab Faculty of Mechanical Engineering Rasht Guilan41996-13776 Iran University of Essex Brain-Computer Interfacing and Neural Engineering Laboratory School of Computer Science and Electronic Engineering ColchesterCO4 3SQ United Kingdom

ISBN: (纸本)9798331511272

Brain-Computer Interface (BCI) systems are relatively new technologies that could play a significant role in aiding the recovery of impaired activities resulting from neuromuscular disabilities in affected individuals. Accurate recognition and classification of motor imagery in BCI systems present a challenge, leading to extensive research in recent years aimed at improving the accuracy of these systems. In this study, a combination of the Empirical Mode Decomposition (EMD) method and a multi-layer Convolutional Neural Network (CNN) is employed. Initially, the signal is decomposed into Intrinsic Mode Functions (IMFs) using EMD, and all IMFs across all trials are analyzed to select the best ones, which are then fed into the CNN as inputs. Additionally, the study incorporates the fusion of three CNN networks, each corresponding to a different IMF. The features extracted from these networks are combined and used to train an SVM classifier. The proposed method achieved an accuracy of 86.1% on the BCI-2a 2008 dataset, outperforming other state-of-the-art approaches. ©2024 IEEE.

关键词： Brain computer interface

来源：评论

学校读者我要写书评

暂无评论

A Multi-view Non-negative Matrix Factorization Single-cell Clustering Algorithm for Missing Data

A Multi-view Non-negative Matrix Factorization Single-cell C...

引用

2022 International Conference on Algorithms, Data Mining, and Information Technology, ADMIT 2022

作者： Yu, Ailian Zhu, Yuan School of Automation China University of Geosciences Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China

ISBN: (数字)9781665454728

ISBN: (纸本)9781665454728

A significant study focus on the field of bioinformatics has been on how to quickly and accurately accomplish the cell clustering task using computational approaches for single-cell RNA sequencing (scRNA-seq) data. Technical issues with scRNA-seq data include missing values, high noise levels, and a large batch impact. While the single-cell data recovery method based on data filling can enhance data quality, it will subjectively alter the distribution of data. To address the above-mentioned issues, we propose a non-negative matrix factorization clustering algorithm (scMVNMF) based on multi-view data of scRNA-seq. Under the assumption of essentially unchanging original data distribution, it can not only identify the typical low-dimensional representation patterns of multi-view data but also produce final explicable clustering findings. The results of the experiments demonstrate that the suggested algorithm has some advantages over the filling approach in terms of clustering tasks and can maintain a certain level of stability when the quality of single-cell data varies. © 2022 IEEE.

关键词： Non-negative matrix factorization

来源：评论

学校读者我要写书评

暂无评论

Method of Forming Paths for Uniform Surface Treatment for Objects of Complex Shape

Method of Forming Paths for Uniform Surface Treatment for Ob...

引用

Annual Siberian Russian Workshop on Electron Devices and Materials (EDM)

作者： Ivan Grigorev Eduard Mursalimov Laboratory of Intelligent Information Systems for Marine Robots M.D. Ageev Institute of Marine Technology Problems FEB RAS Vladivostok Russia Laboratory of Robotics and Intelligent Control Systems Sevastopol State University Laboratory of Intelligent Information Systems for Marine Robots M.D. Ageev Institute of Marine Technology Problems FEB RAS Vladivostok Russia

ISBN: (数字)9798350389234

ISBN: (纸本)9798350353051

In most cases, tool impact paths for surface treatment (painting, milling, laser hardening, etc.) represent a set of continuous spatial curves lying on the surface to be treated. For uniform processing, adjacent curves from this set must be equidistant from each other. This paper presents a new method for covering a given polygonal mesh with equidistant lines based on given initial lines (in the form of a set of vertices on this mesh) and a given distance between adjacent lines, that is measured by Euclidean distance. The method is based on constructing spheres from each vertex of the initial line and removing the vertices of the mesh that fall into at least one of the spheres: the desired equidistant line will be represented by not removed vertices lying on the spheres. To construct each subsequent equidistant line, the last constructed line is used as the initial one: thus, the entire mesh is covered along the surface, despite the fact that the distance between adjacent lines is measured in space. Due to this, the proposed method, unlike the existing ones, works with surfaces of any complexity and requires less computing resources. Ordering the points of the constructed lines, to obtain the reference points of the paths that can be executed by the manipulator, is also presented.

关键词： Solid modeling Shape Surface emitting lasers Milling Kinematics Magnetic heads Mobile robots

来源：评论

学校读者我要写书评

暂无评论

NA-CPG: A robust and stable rhythm generator for robot motion control

引用

Biomimetic Intelligence & robotics 2022年第4期2卷 30-38页

作者： Ru Tong Changlin Qiu Zhengxing Wu Jian Wang Min Tan Junzhi Yu State Key Laboratory of Management and Control for Complex Systems Institute of AutomationChinese Academy of SciencesBeijing 100190China School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100049China Department of Advanced Manufacturing and Robotics College of EngineeringPeking UniversityBeijing 100871China

Central pattern generators(CPGs)have been widely applied in robot motion control for the spontaneous output of coherent periodic ***,the underlying CPG network exhibits good convergence performance only within a certain range of parameter spaces,and the coupling of oscillators affects the network output accuracy in complex topological ***,CPGs may diverge when parameters change drastically,and the divergence is irreversible,which is catastrophic for the control of robot ***,normalized asymmetric CPGs(NA-CPGs)that normalize the amplitude parameters of Hopf-based CPGs and add a constraint function and a frequency regulation mechanism are ***-CPGs can realize parameter decoupling,precise amplitude output,and stable and rapid convergence,as well as asymmetric output ***,it can effectively cope with large parameter changes to avoid network oscillations and *** optimize the parameters of the NA-CPG model,a reinforcement-learning-based online optimization method is further ***,a biomimetic robotic fish is illustrated to realize the whole optimization *** demonstrated that the designed NA-CPGs exhibit stable,secure,and accurate network outputs,and the proposed optimization method effectively improves the swimming speed and reduces the lateral swing of the multijoint robotic fish by 6.7%and 41.7%,*** proposed approach provides a significant improvement in CPG research and can be widely employed in the field of robot motion control.

关键词： Normalized asymmetric CPGs Rhythm generator Motion control Robotic fish

来源：评论

学校读者我要写书评

暂无评论

Transmission Optimization Based on Industrial Internet Information Model 4

Transmission Optimization Based on Industrial Internet Infor...

引用

4th International Conference on Machine Learning and Computer Application, ICMLCA 2023

作者： Feng, Haiwen Tian, Hao Wang, Ting Zhu, Jingyang Wang, Xintong School of Software College Shenyang University of Technology Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (纸本)9798400709449

With the standardized development of industrial Internet, the communication among industrial Internet platforms, devices and gateways is more frequent. Due to the problems of heterogeneous data and low data interoperability existing in different devices, the communication between industrial Internet is hindered. With the development of industrial Internet information model, on the basis of reducing data heterogeneity and improving interoperability, it is more difficult to transmit information due to the increase of information content. Therefore, this paper will design an information model transmission optimization method, through the information model XML file content optimization compression, while in the information model may exist in the Chinese information processing, so that it can better compress the Chinese-English information. The results show that the XML file used in information transmission can be compressed by using this optimization method, and it is proved that the proposed optimization method can improve the transmission efficiency. © 2023 ACM.

关键词： Interoperability

来源：评论

学校读者我要写书评

暂无评论

Path Planning with Potential Field-Based Obstacle Avoidance in a 3D Environment by an Unmanned Aerial Vehicle

arXiv

引用

arXiv 2023年

作者： Batinovic, Ana Goricanec, Jurica Markovic, Lovro Bogdan, Stjepan University of Zagreb Faculty of Electrical Engineering and Computing LARICS Laboratory for Robotics and Intelligent Control Systems Unska 3 Zagreb10000 Croatia

In this paper we address the problem of path planning in an unknown environment with an aerial robot. The main goal is to safely follow the planned trajectory by avoiding obstacles. The proposed approach is suitable for aerial vehicles equipped with 3D sensors, such as LiDARs. It performs obstacle avoidance in real time and on an on-board computer. We present a novel algorithm based on the conventional Artificial Potential Field (APF) that corrects the planned trajectory to avoid obstacles. To this end, our modified algorithm uses a rotation-based component to avoid local minima. The smooth trajectory following, achieved with the MPC tracker, allows us to quickly change and re-plan the UAV trajectory. Comparative experiments in simulation have shown that our approach solves local minima problems in trajectory planning and generates more efficient paths to avoid potential collisions with static obstacles compared to the original APF method. © 2023, CC BY-SA.

关键词： Motion planning

来源：评论

学校读者我要写书评

暂无评论

A 5G-Based Switching Method between a Local controller and an Edge controller 6

A 5G-Based Switching Method between a Local Controller and a...

引用

6th International Conference on intelligent robotics and control Engineering, IRCE 2023

作者： Wang, Xiulian Lin, Jinggao Jin, Xi Xia, Changqing Xu, Chi College of Automation and Electrical Engineering Shenyang Ligong University China Chinese Academy of Sciences Key Laboratory of Networked Control Systems Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China

ISBN: (纸本)9798350326338

With the rapid development of edge computing, industrial automation has evolved a two-layer distributed computing architecture, including local controllers communicating through wired networks and edge controllers communicating wirelessly. The edge controllers in existing studies use WIFI, which has a limited working distance and requires independent network deployment, so they are unsuitable for future large-scale complex industrial production. At present, 5G technology is undergoing rapid development in the field of industrial automation, with wide coverage and excellent mobility, gradually becoming suitable for future large-scale and complex industrial production scenarios. Therefore, this paper proposed an SW5G method based on 5G, which combined the local controller with the edge controller. The controllers were switched according to the constantly changing 5G network transmission delay, thereby optimizing the overall system control performance. Finally, simulation experiments demonstrated good control performance of SW5G in various network scenarios. © 2023 IEEE.

关键词： controllers

来源：评论

学校读者我要写书评

暂无评论

Design and Validation of a Wireless Drone Docking Station

arXiv

引用

arXiv 2023年

作者： Stuhne, Dario Vasiljević, Goran Bogdan, Stjepan Kovačić, Zdenko LARICS Laboratory for Robotics and Intelligent Control Systems University of Zagreb Faculty of Electrical Engineering and Computing Unska 3 Zagreb10000 Croatia

Drones are increasingly operating autonomously, and the need for extending drone power autonomy is rapidly increasing. One of the most promising solutions to extend drone power autonomy is the use of docking stations to support both landing and recharging of the drone. To this end, we introduce a novel wireless drone docking station with three commercial wireless charging modules. We have developed two independent units, both in mechanical and electrical aspects: the energy transmitting unit and the energy receiving unit. We have also studied the efficiency of wireless power transfer and demonstrated the advantages of connecting three receiver modules connected in series and parallel. We have achieved maximum output power of 96.5 W with a power transfer efficiency of 56.6% for the series connection of coils. Finally, we implemented the system in practice on a drone and tested both energy transfer and landing. Copyright © 2023, The Authors. All rights reserved.

关键词： Drones

来源：评论

学校读者我要写书评

暂无评论

Reinforcement learning-enhanced dynamic multi-objective evolutionary algorithm for cooperative shovel scheduling in open-pit mining

Reinforcement learning-enhanced dynamic multi-objective evol...

引用

2024 China Automation Congress, CAC 2024

作者： Zhang, Zihao Li, Changhe Yang, Shengxiang School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China School of Artificial Intelligence Anhui University of Science & Technology Hefei232001 China School of Computer Science and Informatics De Montfort University Leicester United Kingdom

ISBN: (纸本)9798350368604

Aiming at the ore blending problem in the open-pit mining scenario, the optimization objective is to minimize the grade variance of the sliding window of the ore flow, and a cooperative shovel scheduling model for real-time ore blending is established. A reinforcement learning-enhanced dynamic multi- objective evolutionary algorithm is proposed, where a Q-learning operator selection mechanism is introduced to reuse the information from the previous environment for tracking the optimal solution in the dynamic environment. Experimental results show that the proposed method can effectively control the grade fluctuation of the ore flow and dynamically respond to external events, and can find a better solution in real time compared with the traditional operator selection algorithm. © 2024 IEEE.

关键词： Open pit mining

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：