检索结果-内蒙古大学图书馆

Artificial Neural Network-Based Direct Power control to Enhance the Performance of a Pmsg-Wind Energy Conversion System Under Real Wind Speed and Parameter Uncertainties: An Experimental Validation

SSRN

引用

SSRN 2023年

作者： Majout, Btissam Bossoufi, Badre Karim, Mohammed Skruch, Pawel Mobayen, Saleh El Mourabit, Youness El Zair Laggoun, Zakaria Laboratory of Engineering Modelling and Systems Analysis SMBA University Fez Morocco Department of Automatic Control and Robotics AGH University of Science and Technology Kraków30-059 Poland Graduate School of Intelligent Data Science National Yunlin University of Science and Technology 123 University Road Section 3 Yunlin Douliou640301 Taiwan National School of Applied Sciences Abdelmalek Essaadi University Tetouan Morocco Laboratory of Electrotechnique Constantine Mentouri Brothers Constantine 1 University Constantine Algeria

With the increasing emphasis on embedding advanced technology into system controls, the Direct Power control (DPC) approach has garnered significant attention, owing to its straightforward and highly adaptable algorithm. It has been adopted in many applications. However, the variable frequency, harmonic distortion of the currents, and power ripples caused by Hysteresis controllers and switching tables decrease its effectiveness and robustness, affecting the system’s performance. For this reason, this paper proposed a new DPC based on Artificial Neural Network (ANN) approaches. In this approach, the hysteresis comparator and the switching table are substituted with ANN controllers and then applied on both sides: machine-side converter (MSC) and grid-side converter (GSC) of a Permanent Magnet Synchronous Generator based Wind Energy Conversion System (PMSG-WECS). Moreover, to make the system more efficient in varying wind conditions, this study expands the utilization of the artificial neural networks (ANN) to encompass the maximum power point tracking (MPPT) control strategy. To demonstrate the effectiveness of the proposed approach on the system behaviors, a simulation test was carried out in the Matlab/Simulink environment, using a real wind profile of a Moroccan city (Essaouira). In comparison to the classical DPC control, the simulation results showed the superior performance of the proposed ANN-DPC control in terms of reference tracking, response time, overshoot, precision, and its capacity to reduce the rate of power ripples and total harmonic distortion (THD) in the injected currents. Furthermore, a robustness test was also included in this work to check the robustness of the proposed control against parameters variation. In conclusion, the feasibility and effectiveness of the ANN-DPC control approach were confirmed through experimental validation using the dSPACE DS1104 board. © 2023, The Authors. All rights reserved.

关键词： MATLAB

来源：评论

学校读者我要写书评

暂无评论

Position control of X-Y Precision Motion Stage Based on Iterative Learning and Model Prediction

Position Control of X-Y Precision Motion Stage Based on Iter...

引用

Chinese control and Decision Conference, CCDC

作者： Guopeng Zhang Tao Zhang Qingxin Li Li Chen Hualiang Zhang Jingzhe Fang Yiqiang Zhang School of Artificial Intelligence Shenyang University of Technology Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang Institute of Automation Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China School of Artificial Intelligence Shenyang University of Technology Shenyang China School of Electrical Engineering Shenyang University of Technology Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China

ISBN: (数字)9798350387780

ISBN: (纸本)9798350387797

The X-Y precision planar motion stage is a highly advanced motion control device that has been widely utilized in various precision motion control fields. This platform achieves precise positioning and control of objects through precise motion along the X and Y axes, providing an outstanding solution for scientific research, industrial production, and other applications. The X-Y platform consists of two permanent magnet synchronous linear motors. In the three-loop control of the motor, when the current loop uses a PID controller, there is a problem in tuning the parameters. This paper replaces the original PID controller in the current loop with a model predictive controller. Simultaneously, addressing the issue of improving the tracking accuracy of the X-Y precision planar motion stage, a forgetting high-order variable gain PD-type iterative learning control is proposed. Subsequently, both of these control methods are applied to the Simulink model of the X-Y precision motion stage motor. This not only solves the complex problem of tuning the motor current loop parameters but also improves the tracking accuracy of the X-Y precision motion stage. The results indicate that when using both model predictive controllers and forgetting high-order variable gain PD-type iterative learning controllers for motor control, not only can the tuning of current loop parameters be omitted, but also tracking errors can be effectively reduced, and the system convergence speed can be accelerated.

关键词： Tracking loops Trajectory tracking Predictive models Motors Mathematical models Motion control Tuning

来源：评论

学校读者我要写书评

暂无评论

Measuring the distance and orientation of a planar surface using nonstructured lighting

引用

systems AND COMPUTERS IN JAPAN 1996年第8期27卷 83-92页

作者： Tsukiyama, T Member Electrotechnical Laboratory Tsukuba Japan 305 Tosbifumi Tsukiyama:graduated in 1972 from the Biological Engineering Department Osaka University where he also received his Dr. of Eng. degree. He joined Electrotechnical Laboratory Ministry of Tread and Industry (Japan) in 1972. At present he is Senior Researcher at Computer Vision Section Intelligent Systems Division ETL. He was a Visiting Researcher at University of Illinois during 1984–1985. He has been interested in vision system for mobile robots and image processing architectures. He is a member of the Society of Instrumental and Control Engineers Japan Robotics Society of Japan and Information Processing Society of Japan.

This paper proposes a method of 3-dimensional measurement of a planar surface by using two fixed light sources and a TV camera. A set of two images is recorded by the camera switching on each light alternately. The peak of the luminance distribution in each image is detected, and the orientation and distance of the planar surface are calculated. The position of the peak of a luminance distribution can be estimated accurately by using an image processing. The light sources can be conventional apparatus with no particular structure. The method is simple and suitable for a vision system on an indoor mobile robot.

关键词： distance to surface orientation of planar surface point light source luminance distribution ring light

来源：评论

学校读者我要写书评

暂无评论

Application of Iterative Learning control in X-Y Precision Planar Motion Platform

Application of Iterative Learning Control in X-Y Precision P...

引用

Chinese Automation Congress (CAC)

作者： Hongyu Yan Danping Jia Tao Zhang Hualiang Zhang Yingjie Xiong Xu Lu Yang Liu School of Artificial Intelligence Shenyang University of Technology Shenyang China School of Information Science and Engineering Shenyang University of Technology Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China School of Electrical Engineering Dalian University of Technology Dalian China College Of Information Science and Engineering Northeastern University Shenyang China

ISBN: (纸本)9781665426480

The size of the tracking error is one of the important indicators to measure the control system of the X-Y Precision Planar Motion Platform. Iterative learning control (ILC) can obtain higher tracking accuracy through multiple iterations. However, it is found in experiments that the tracking error of the XY precision motion stage using ordinary PD-type iterative learning will eventually fluctuate in a relatively range, and some high-frequency Noise will seriously affect the stability of the system after many iterations. Aiming at the above problems, a PD-type variable gain open-closed loop ILC with a low-pass filter is proposed. This control scheme can effectively remove high-frequency noise and reduce tracking errors. Finally, a hardware-in-the-loop real-time simulator is used to conduct a comparative experiment. Through comparison with PID controller and ordinary PD-type ILC, the experimental consequence show that this arithmetic has a smaller tracking error than the other two algorithms.

关键词： Tracking loops Tracking Low-pass filters control systems Size measurement Stability analysis Real-time systems

来源：评论

学校读者我要写书评

暂无评论

A Haptic Exploration and Surface Classification of Objects with Four Typical Surface Properties

A Haptic Exploration and Surface Classification of Objects w...

引用

International Conference on Advanced robotics and Mechatronics (ICARM)

作者： Peng Qi Yunfeng Wu Tianliang Yao Bo Lu Yi Sun Jian S. Dai Department of Control Science and Engineering College of Electronics and Information Engineering Tongji University Shanghai P. R. China Robotics and Microsystems Center School of Mechanical and Electric Engineering Soochow University Suzhou Jiangsu China Laboratory of Intelligent Systems Ecole Polytechnique Federale de Lausanne Lausanne Switzerland Department of Mechanical and Energy Engineering College of Engineering Southern University of Science and Technology Shenzhen P. R. China School of Natural Mathematical and Engineering Sciences King's College London

To effectively interact with the physical world, an intelligent robot is required to have the ability to obtain the detailed features of an unknown object. Visual devices are commonly used to detect the global geometry of an object; however, detailed information such as surface properties cannot be identified using these devices. The current study proposes an efficient haptic exploration method to recognize the physical properties of surfaces using an intelligent fingertip. Our surface-following algorithm utilizes the normal force vector and the tangential force vector at the contact point between the fingertip and the target object to predict the moving direction and implement the surface exploration. And a correction index $K$ is introduced to adjust the sliding velocity. The algorithm is proved to be robust and high performance both in simulation and lab experiments. Finally, we propose and explore a haptic prediction neural network, which enables our robot to have an accurate feel through physical interaction. In the classification experiment of four types of objects with different surface properties, the average accuracy of the proposed model is 90.2%.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to a Low-Cost, Light-Weight Climbing Robot for Inspection of Glass Curtains

引用

International Journal of Advanced Robotic systems 2015年第3期12卷 20-20页

作者： Ran Liang Meteb Altaf Eball Ahmad Rong Liu Ke Wang Robotics Institute School of Mechanical Engineering and Automation Beihang University Beijing China National Robotics & Intelligent Systems center King AbdulAziz City for Science and Technology Saudi Arabia Riyadh Saudi Arabia Arts et Métiers ParisTech Design Manufacturing and Control Laboratory (LCFC) Paris France

Corrigendum, corrigendum

关键词：

来源：评论

学校读者我要写书评

暂无评论

Analytic Compact Model of Short-channel Cylindrical ballistic GAA MOSFET Including SDT effect

引用

Journal of Physics: Conference Series 2020年第1期1570卷

作者： He Cheng Chao Zhang Tiefeng Liu Zhijia Yang Zhipeng Zhang Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang 110016 China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang 110016 China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang 110169 China

We have proposed an analytic compact model describing the drain current characteristics valid in all operating regions, for ultra-short channel cylindrical gate-all-around metal-oxide-semiconductor field-effect transistors considering source-to-drain tunnelling effect. The drain-induced barrier lowering had been incorporated from one two-dimensional analysis in our previous compact model. In this study, to represent the energy level profile along the device channel direction into the Wentzel-Kramers-Brillouin approximation by substituting a parabolic function, we can analytically derive the expressions of the transmission coefficients for source-to-drain tunneling. In the subthreshold region, the source-to-drain tunneling current then can be evaluated using the Landauer formula. Finally, a fully analytic compact model is proposed for representing the drain current in all operating regions. The results compared with non-equilibrium Green's function transport simulations can be obtained in a good agreement.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Holographic MIMO Communications with Arbitrary Surface Placements: Near-Field LoS Channel Model and Capacity Limit

arXiv

引用

arXiv 2023年

作者： Gong, Tierui Wei, Li Huang, Chongwen Yang, Zhijia He, Jiguang Debbah, Mérouane Yuen, Chau School of Electrical and Electronics Engineering Nanyang Technological University Singapore639798 Singapore College of Information Science and Electronic Engineering Zhejiang University Hangzhou310027 China Hangzhou310027 China State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110016 China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang110016 China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang110169 China Technology Innovation Institute Masdar City Abu Dhabi9639 United Arab Emirates KU 6G Research Center Khalifa University of Science and Technology P O Box 127788 Abu Dhabi United Arab Emirates CentraleSupelec University Paris-Saclay Gif-sur-Yvette91192 France

Envisioned as one of the most promising technologies, holographic multiple-input multiple-output (H-MIMO) recently attracts notable research interests for its great potential in expanding wireless possibilities and achieving fundamental wireless limits. Empowered by the nearly continuous, large and energy-efficient surfaces with powerful electromagnetic (EM) wave control capabilities, H-MIMO opens up the opportunity for signal processing in a more fundamental EM-domain, paving the way for realizing holographic imaging level communications in supporting the extremely high spectral efficiency and energy efficiency in future networks. In this article, we propose a generalized EM-domain near-field channel modeling and study its capacity limit of point-to-point H-MIMO systems that equips arbitrarily placed surfaces in a line-of-sight (LoS) environment. Two effective and computational-efficient channel models are established from their integral counterpart, where one is with a sophisticated formula but showcases more accurate, and another is concise with a slight precision sacrifice. Furthermore, we unveil the capacity limit using our channel model, and derive a tight upper bound based upon an elaborately built analytical framework. Our result reveals that the capacity limit grows logarithmically with the product of transmit element area, receive element area, and the combined effects of 1/d2mn, 1/d4mn, and 1/d6mn over all transmit and receive antenna elements, where dmn indicates the distance between each transmit element n and receive element m. Particularly, 1/d6mn dominates in the near-field region whereas 1/d2mn dominates in the far-field region. Numerical evaluations validate the effectiveness of our channel models, and showcase the slight disparity between the upper bound and the exact capacity, which is beneficial for predicting practical system performance. Copyright © 2023, The Authors. All rights reserved.

关键词： MIMO systems

来源：评论

学校读者我要写书评

暂无评论

Fabrication of translucent graded dental crown using zirconia-yttrium multi-slurry tape casting 3D printer

引用

Journal of the Mechanical Behavior of Biomedical Materials 2024年 152卷 106406页

作者： Romario, Yulius Shan Bhat, Chinmai Ramezani, Maziar Pasang, Tim Chen, Zhangwei Jiang, Cho-Pei Graduate Institute of Manufacturing Technology National Taipei University of Technology 1 Sec. 3 Zhongxiao E. Rd. Taipei10608 Taiwan High-value Biomaterials Research and Commercialization Center National Taipei University of Technology 1 Sec. 3 Zhongxiao E. Rd. Taipei10608 Taiwan Department of Mechanical Engineering Auckland University of Technology Auckland1010 New Zealand Department of Engineering Design Manufacturing and Management Systems Western Michigan University KalamazooMI4900-5200 United States Additive Manufacturing Institute Shenzhen University Shenzhen518060 China Guangdong Key Laboratory of Electromagnetic Control and Intelligent Robotics College of Mechatronics and Control Engineering Shenzhen University Shenzhen518060 China Department of Mechanical Engineering National Taipei University of Technology 1 Sec. 3 Zhongxiao E. Rd. Taipei10608 Taiwan

This paper aims to fabricate functionally graded dental crown using a multi-slurry tape casting additive manufacturing technology. The different luminescence of the dental crown was obtained with different composition of zirconia and yttria. Zirconia with tunable mechanical properties and translucency are obtained by adding 3, 3.5, 4, 4.5, and 5 mol% of yttrium oxide to zirconia powder. After obtaining the printable slurry with maximum solid loading, the green bodies are prepared using the in-house built high-speed multi-ceramic tape casting technology. They are later sintered with two-stage sintering method. After the successful fabrication, the mechanical properties and translucency of the specimens were evaluated with Vickers hardness, three-point bending and translucency parameter tests. Finally, an FGM tooth crown with five photocurable slurries is proposed to demonstrate the translucent gradient effect of sintered part. The solid loading of 80% zirconia and 20% resin delivered samples without any surface cracks. The shrinkage ratio analysis showed that the sintered sample dimension was reduced by 20%, 20%, and 23% along X, Y, and Z directions. The samples fabricated with 3% yttrium oxide to zirconia delivered excellent hardness (1687 HV) and flexural strength (650.6 MPa). However, the relative luminescence increased with increasing the yttrium oxide for 3–5 mol%. With the optimized process parameters, the proposed dental crown is fabricated and analyzed for their shrinkage ratio, mechanical, and translucency properties. The study proposes the potential of fabricating customized dental crown with gradient translucent appearance. © 2024

关键词： Zirconia

来源：评论

学校读者我要写书评

暂无评论

Research on optimization method of routing buffer linkage based on Q-learning

引用

Journal of Physics: Conference Series 2022年第1期2187卷

作者： Zhonghua Han Hongfeng Qi Daliang Chang Wei Gong Shilong Dai School of Information and Control Engineering Shenyang Jianzhu University Shenyang 110168 China. Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang 110016 China. Shenyang Institute of Automation Chinese Academy of Sciences Shenyang 110016 China. Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang 110169 China.

According to the characteristics of the painting process of passenger car manufacturing enterprises, by formulating the routing buffer linkage rules based on the total renewal cost, the linkage process of the bus in the routing buffer is controlled, and an improved Q-learning (Q- The routing buffer of learning) algorithm quickly finds the optimal path method. According to the actual production situation, this method improves the dynamic parameters of the algorithm on the basis of the traditional Q-learning algorithm, and improves the optimization speed and accuracy of the algorithm by establishing the correlation between the work-in-process and its neighboring work-in-process in the current state. Through multiple sets of example simulation tests, the effectiveness of the Q-learning algorithm in solving the optimization problem of routing buffer linkage is verified.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：