检索结果-内蒙古大学图书馆

SSRN 2024年

作者： Wang, Litian Chen, Jie Wang, Shuai Zhou, Tongyao Li, Dan Li, Cuiping Qian, Lirong Xiong, Yang Miao, Lin Xie, Zhiyong Tianjin Key Laboratory of Film Electronic and Communication Devices School of Integrated Circuit Science and Engineering Tianjin University of Technology Tianjin300384 China School of Integrated Circuit Science and Engineering Tianjin University of Technology Tianjin300384 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China China Tianjin Bohua Yongli Chemical Industry CO. Ltd Tianjin30045 China

Protic ionic liquids (PILs) have emerged as innovative solvents with significant potential for CO2 capture and transformation, presenting a sustainable alternative to conventional methods which often involve energy-intensive processes or environmentally detrimental chemicals. Herein, a novel strategy for CO2 capture and conversion at mild conditions using non-stoichiometric protic ionic liquids (NPILs) was demonstrated for the first time. These NPILs, employed as sorbents, solvents, and catalysts, were composed of imidazole (Im) and 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU) in various ratios. Correlations between the mole ratio of DBU/Im and physicochemical properties such as viscosity, conductivity, thermal stability, and the distribution of neutral and ionic species were systematically investigated. Effects of the absorption temperature and CO2 partial pressure on the absorption capacity were also studied. Different absorption mechanisms, including carbonate and carbamate pathways, were analyzed using FT-IR and NMR spectroscopy. Moreover, the fixed CO2 could be catalytically converted to quinazoline-2,4(1H,3H)-diones under exceptionally mild reaction conditions (1atm, 50 °C, metal-free process). A plausible reaction mechanism involving simultaneous CO2 activation and substrate activation for the transformation of CO2 into quinazoline-2,4(1H,3H)-diones was verified through NMR spectra. It is believed that the new insights into the CO2 mechanism will facilitate the rationaldesign of functional ionic liquids for CO2 capture, utilization, and storage in the future. © 2024, The Authors. All rights reserved.

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

10-Hertz quantum light source generation on the cesium D2 line using single photon modulation

arXiv

引用

arXiv 2022年

作者： Zuo, Guan-Hua Zhang, Yu-Chi Li, Gang Zhang, Peng-Fei Yang, Peng-Fei Guo, Yan-Qiang Zhu, Shi-Yao Zhang, Tian-Cai State Key Laboratory of Quantum Optics and Quantum Optics Devices Collaborative Innovation Center of Extreme Optics Institute of Opto-Electronics Shanxi University Taiyuan030006 China College of Physics and Electronic Engineering Shanxi University Taiyuan030006 China Department of Physics Zhejiang University Hangzhou310027 China Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi Province College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan030024 China

Generation of quantum light source is a promising technique to overcome the standard quantum limit in precision measurement. Here, we demonstrate an experimental generation of quadrature squeezing resonating on the cesium D2 line down to 10 Hz for the first time. The maximum squeezing in audio frequency band is 5.57 dB. Moreover, we have presented a single-photon modulation locking to control the squeezing angle, while effectively suppressing the influence of laser noise on low-frequency squeezing. The whole system operates steadily for hours. The generated low-frequency quantum light source can be applied in quantum metrology, light-matter interaction investigation and quantum memory in the audio frequency band and even below. Copyright © 2022, The Authors. All rights reserved.

关键词： Photons

来源：评论

学校读者我要写书评

暂无评论

Nonlinear Modeling and Sensitivity Performance Analysis of a Novel Tapered Beam-Based Micro-Gyroscope

SSRN

引用

SSRN 2022年

作者： Zhang, Kunpeng Xie, Jianwei Hao, Shuying Feng, Jingjing Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

In this paper, we investigate a class of tapered beam micro-gyroscope with electrostatically driven and consider the effects of electrostatic force nonlinearity and fringing field. The governing equations of system are derived by Euler angular transformation and Hamilton principle. The ordinary differential equations with fourth-order variable coefficient are solved by the Adomian decomposition method (ADM). Influence of parameters such as shape factors and DC voltage on static deflection, pull-in voltage and natural frequency of tapered beam micro-gyroscope are investigated. Galerkin discretization is performed on the governing equations of the tapered beam micro-gyroscope. The frequency-response equation of the system is deduced and solved by applying the method of multi-scale (MMS). We obtained the influence regular of DC voltage and fringing field effect on the frequency-response curves. Finally, performance of the tapered beam micro-gyroscope is analyzed in terms of bandwidth, sensitivity, and calibration curve nonlinearity under different shape factors. In static analysis, the pull-in voltage of system gradually decreases with the increase of the shape factors of tapered beam micro-gyroscope, and it will be further reduced by considering the fringing field effect. In the dynamic analysis, the maximum amplitude of motion in the drive and sense directions increases significantly with the shape factors of the tapered beam. Softening characteristics caused by the nonlinearity of the electrostatic force are enhanced. Compared with straight beam micro-gyroscope, the tapered beam micro-gyroscope has the higher amplitude of motion and pronounced nonlinear characteristics. Due to the nonlinearity, the frequency-response curves in the drive direction shifts to the left. The amplitude of motion in the drive direction has a high response over a wide frequency band. By controlling the DC voltage, the natural frequency of the sense mode is matched with the nonlinear natural

关键词： Bandwidth

来源：评论

学校读者我要写书评

暂无评论

Vibration Characteristics Analysis Of A Double-Suction Centrifugal Pump Identified By intelligent Algorithms 12

Vibration Characteristics Analysis Of A Double-Suction Centr...

引用

12th IEEE Global Reliability and Prognostics and Health Management, PHM-Nanjing 2021

作者： Gu, Zhenyue Zhang, Mian Li, Decai Kang, Tianbo Tang, Xiuyang Wang, Zhiyuan Pei, Zhenlong Wang, Yiqiao Tianjin Key Laboratory For Advanced Mechatronic System Design And Intelligent Control School Of Mechanical Engineering Tianjin University Of Technology Tianjin300384 China China Tianjin Todelon Scicnce &TECHOLOGY CO. Ltd Tianjin China State Key Lab Of Water Resources And Hydropower Engineering Science Wuhan University Wuhan China

ISBN: (纸本)9781665401302

Due to the merits of high flow rate and high lift, double-suction centrifugal pumps are widely used for agricultural irrigation along the Yellow River in northern China. The operational conditions of the pump are highly related to the silt concentration and flow rates. Therefore, it is crucial to identify the vibration characteristics corresponding to different silt concentrations and flow rates to provide a prior guideline for pump condition monitoring. To this end, this paper explores the identification capabilities of typical intelligent models, including convolutional neural network (CNN), deep neural network (DNN), and support vector machine (SVM), to intelligently establish the connection between vibration characteristics and different flow rates and silt concentrations. Experimental studies on a double-section pump covering a range of flow rates and different silt concentrations are conducted. The results show that CNN features higher identification accuracy than DNN and SVM. © 2021 IEEE.

关键词： Vibration analysis

来源：评论

学校读者我要写书评

暂无评论

Study on Mechanical Properties of Dual-Channel Cryogenic 3d Printing Scaffold for Mandibular Defect Repair

SSRN

引用

SSRN 2023年

作者： Gao, Lilan Sun, Mengchao Liu, Jie Meng, Lulu Liu, Han Zheng, Xiongfei Liu, Hao Li, Ruixin Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300382 China Tianjin300382 China Beijing Friendship Hospital Capital Medical University 100050 China State Key Laboratory of Robotics Institutes for Robotics and Intelligent Manufacturing Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110017 China Tianjin Key Laboratory of Oral and Maxillofacial Function Reconstruction Tianjin Stomatological Hospital The Affiliated Stomatological Hospital of Nankai University Tianjin300041 China

Mandibular defect repair has always been a clinical challenge, facing technical bottleneck. The new materials directly affect technological breakthroughs in mandibular defect repair field. Our aim is to fabricate a scaffold for mandibular defect repairing with advanced biomaterials. Therefore, a novel dual-channel printed scaffold consisting of silk fibroin/collagen type I /hydroxyapatite (SCH) and polycaprolactone/hydroxyapatite (PCL/HA) was fabricated by 3D printing technology with double nozzles. The mechanical properties and behaviors of dual-channel printed scaffold were investigated by performing uniaxial compression, creep, stress relaxation and ratcheting experiments respectively. The experiments indicated the Young modulus of dual-channel printed scaffold was 60.1 kPa and dual-channel printed scaffold was typical nolinear viscoelastic consistent with bone tissue. Finite Element Analysis (FEA) was employed performing a numerical simulation to evaluate the implantation effect in mandible. The stress distribution of the contact area between scaffold and defect was uniform, the maximum Mises stress of cortical bone and cancellous bone in defect area were 54.52MPa and 3.196MPa, and the maximum displacement of cortical bone and cancellous bone in defect area were 0.1575mm and 0.1555mm, which were distributed in the incisor region. The peak value of the maximum Mises stress for the scaffold implanted was 3.128× MPa and the maximum displacement was 6.453×mm distributed near incisor area. The displacement distribution of the scaffold was consistent with that of cortical and cancellous bone. The scaffold recovered well when the force applied on it disappeared. Above all, dual-channel printed scaffold had excellent bio-mechanical properties in implanting mandible, which provides a new idea for the reconstruction of irregular bone defects in the mandible and has good clinical development prospects. © 2023, The Authors. All rights reserved.

关键词： 3D printing

来源：评论

学校读者我要写书评

暂无评论

Thermal-Economic Optimization and Working Fluid Selection of Subcritical Organic Rankine system for Low-Temperature Waste Heat Recovery

SSRN

引用

SSRN 2022年

作者： Zhang, Chao Li, Yongwang Fu, Wencheng Zhiting, Tong Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

In the present study, multi-objective optimization is conducted to search for the best operating condition for a subcritical organic Rankine system with the trade-off between system exergy efficiency and dynamic payback period (PBP). A 150°C wastewater heat source is employed as a typical low-temperature heat source. Five decision variables are considered: turbine inlet temperature and pressure, pinch point temperature differences in evaporator and condenser, and condensing temperature. The multi-objective genetic algorithm combined with the backpropagation neural network method is employed as the optimization approach. In addition, the improved Technique for Order Preference by Similarity to an Ideal Solution (TOPSIS) is developed to gain the optimal Pareto front solution for either working fluid and find the optimal working fluid among the candidates investigated. The results show that working fluid R236fa is the optimal solution, despite the minimum PBP for working fluid R123 and the maximum system exergy efficiency for working fluid R1234ze. Under the optimal working condition for working fluid R236fa, the system exergy efficiency and the PBP are 0.465 and 7.377 years, respectively. © 2022, The Authors. All rights reserved.

关键词： Multiobjective optimization

来源：评论

学校读者我要写书评

暂无评论

Arbitrarily shaped retro-reflector by optics surface transformation

引用

Chinese Optics Letters 2020年第10期18卷 58-62页

作者： Fei Sun Yichao Liu Yibiao Yang Zhihui Chen Sailing He Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi ProvinceCollege of Physics and OptoelectronicsTaiyuan University of TechnologyTaiyuan 030024China Centre for Optical and Electromagnetic Research State Key Laboratory of Modern Optical InstrumentationNational Engineering Research Center for Optical InstrumentsZhejiang UniversityHangzhou 310058China

A novel way to design arbitrarily shaped retro-reflectors by optics surface transformation is proposed. The entire design process consists of filling an optic-null medium between the input and output surfaces of the retroreflector, on which the points have 180 deg reverse corresponding relations. The retro-reflector can be designed to be very thin(a planar structure) with high efficiency. The effective working angles of our retro-reflector are very large(from-80 deg to +80 deg), which can, in principle, be further extended. Layered metal plates and zero refractive index materials are designed to realize the proposed retro-reflector for a TM polarized beam.

关键词： retro-reflector optics surface transformation

来源：评论

学校读者我要写书评

暂无评论

An Inherent Property-Based Rumor Dissemination Model in Online Social Networks

IEEE Networking Letters

引用

IEEE Networking Letters 2020年第1期2卷 43-46页

作者： Cui, Lei Xie, Gang Yu, Shui Zhai, Xuemeng Gao, Longxiang School of Information Technology Deakin University BurwoodVIC3125 Australia Shanxi Key Laboratory of Advanced Control and Intelligent Information System Taiyuan University of Science and Technology Taiyuan030024 China School of Software University of Technology Sydney SydneyNSW2007 Australia

Rumor propagation is an important issue in online social networks (OSNs), while modelling rumor propagation is critical and challenging. Existing studies are restrictive for unrealistic assumptions. We find that the inherent property of a rumor has determinant impact on propagation dynamics, and rumor propagates across different clustered communities with variable transmissibility. In this letter, we formulate the problem using information theory and establish a rigorous two layer epidemic model. As a result, the proposed model reflects the studied subject better than the previous models. Extensive experiments have been conducted through real-world twitter dataset, the results confirm our theoretical findings, and demonstrate that the proposed model outperforms the existing ones. © 2019 IEEE.

关键词： Social networking (online)

来源：评论

学校读者我要写书评

暂无评论

Research on Feedforward control Based on Robot Dynamics Parameters Identification 17

Research on Feedforward Control Based on Robot Dynamics Para...

引用

17th IEEE International Conference on Mechatronics and Automation, ICMA 2020

作者： Shao, Xingmao Wang, Shoujun Yang, Liusong Liu, Nan Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin300384 China Citic Heavy Industries Company Ltd. Luoyang471003 China

ISBN: (纸本)9781728164151

Accurate robot dynamics model can effectively improve the motion control performance of robot, and accurate dynamics parameters are the basis for establishing dynamics model. This paper discusses the parameter identification method of the tandem manipulator and the feedforward control scheme based on dynamics. First, we deduced the basic parameters of the first three joints of the UR5 manipulator, and identified the parameters through experimental sampling and calculation. Secondly, we established a feedforward control mechanism based on dynamics using the Simulink platform, and simulated and verified the feedforward control of the robot three-axis system. The experimental results show that the feedforward control scheme based on robot dynamics can effectively improve the error convergence performance, which proves the effectiveness of the method. © 2020 IEEE.

关键词： Manipulators

来源：评论

学校读者我要写书评

暂无评论

Quantum Interference between Photons and Single Quanta of Stored Atomic Coherence

引用

Physical Review Letters 2022年第8期128卷 083605-083605页

作者： Xingchang Wang Jianmin Wang Zhiqiang Ren Rong Wen Chang-Ling Zou Georgios A. Siviloglou J. F. Chen Shenzhen Institute for Quantum Science and Engineering and Department of Physics Southern University of Science and Technology Shenzhen 518055 China International Quantum Academy (SIQA) and Shenzhen Branch Hefei National Laboratory Futian District Shenzhen 518055 China State Key Laboratory of Precision Spectroscopy School of Physics and Electronic Science East China Normal University Shanghai 200241 China Key Laboratory of Advanced Transducers and Intelligent Control System of Ministry of Education College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan 030024 Shanxi China CAS Key Laboratory of Quantum Information University of Science and Technology of China Hefei 230026 Anhui China Guangdong Provincial Key Laboratory of Quantum Science and Engineering Southern University of Science and Technology Shenzhen 518055 China

Essential for building quantum networks over remote independent nodes, the indistinguishability of photons has been extensively studied by observing the coincidence dip in the Hong-Ou-Mandel interferometer. However, indistinguishability is not limited to the same type of bosons. For the first time, we hereby observe quantum interference between flying photons and a single quantum of stored atomic coherence (magnon) in an atom-light beam splitter interface. We demonstrate that the Hermiticity of this interface determines the type of quantum interference between photons and magnons. Consequently, not only the bunching behavior that characterizes bosons is observed, but counterintuitively, fermionlike antibunching as well. The hybrid nature of the demonstrated magnon-photon quantum interface can be applied to versatile quantum memory platforms, and can lead to fundamentally different photon distributions from those occurring in boson sampling.

关键词： Electromagnetically induced transparency Quantum description of light-matter interaction Quantum optics Single photon sources Atomic ensemble Atom & ion cooling Coherent control Photon counting

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：