检索结果-内蒙古大学图书馆

IEEE Conference on Decision and control

作者： Yorick Broens Hans Butler Roland Tóth Department of Electrical Engineering Eindhoven University of Technology Eindhoven The Netherlands ASML Veldhoven The Netherlands Systems and Control Laboratory Institute for Computer Science and Control Hungary

ISBN: (数字)9781665467612

ISBN: (纸本)9781665467629

The ever increasing need for performance results in increasingly rigorous demands on throughput and positioning accuracy of high-precision motion systems, which often suffer from position dependent effects that originate from relative actuation and sensing of the moving-body. Due to the highly stiff mechanical design, such systems are typically controlled using rigid body control design approaches. Nonetheless, the presence of position dependent flexible dynamics severely limits attainable position tracking performance. This paper presents two extensions of the conventional rigid body control framework towards active control of position dependent flexible dynamics. Additionally, a novel control design approach is presented, which allows for shaping of the full closed-loop system by means of structured H ∞ co-design. The effectiveness of the approach is validated through simulation using a high-fidelity model of a state-of-the-art moving-magnet planar actuator.

关键词： Linear systems Mechatronics Costs control design Tracking Dynamics Observers

来源：评论

学校读者我要写书评

暂无评论

LPV sequential loop closing for high-precision motion systems

arXiv

引用

arXiv 2022年

作者： Broens, Yorick Butler, Hans Tóth, Roland The Department of Electrical Engineering Eindhoven University of Technology Eindhoven Netherlands ASML Veldhoven Netherlands The Systems and Control Laboratory Institute for Computer Science and Control Hungary

Increasingly stringent throughput requirements in the industry necessitate the need for lightweight design of high-precision motion systems to allow for high accelerations, while still achieving accurate positioning of the moving-body. The presence of position dependent dynamics in such motion systems severely limits achievable position tracking performance using conventional sequential loop closing (SLC) control design strategies. This paper presents a novel extension of the conventional SLC design framework towards linear-parameter-varying systems, which allows to circumvent limitations that are introduced by position dependent effects in high-precision motion systems. Advantages of the proposed control design approach are demonstrated in simulation using a high-fidelity model of a moving-magnet planar actuator system, which exhibits position dependency in both actuation and *** Codes 93-06 © 2022, CC BY.

关键词： Linear systems

来源：评论

学校读者我要写书评

暂无评论

A Survey of Fault Tolerance in Cloud Computing

A Survey of Fault Tolerance in Cloud Computing

引用

systems, Advanced Technologies and Knowledge (ISSATK), International Symposium of

作者： Om Kolthoum Elhajjej Nouha Alyaoui Samia Dardouri Karim Chabir Research Laboratory Modeling Aanalysis Control of System (MACS) LR16ES22 National engineering school of Gabes (ENIG) University of Gabes Tunisia Computer Science and Telecommunications Department Laboratory of Modeling Analysis and Control of Systems (MACS) Higher Institute of Applied Sciences and Technology Zarroug Gafsa Gafsa University Tunisia Department of Computer Science College of Computing and Information Technology Shaqra University Saudi Arabia InnoV’COM Laboratory-Sup’Com University of Carthage Tunisia

ISBN: (数字)9798331540173

ISBN: (纸本)9798331540180

This paper is designed to provide a comprehensive overview of the latest developments in fault tolerance methods for cloud computing. Maintaining high availability and reliability of cloud environments requires fault tolerance. This paper explores fault tolerance in the context of cloud computing and discusses recent challenges and innovations in the field. Moreover, it examines the ongoing research efforts to improve fault-tolerance architectures. At the end of the paper, the paper presents system-level metrics that are relevant to fault tolerance.

关键词： Measurement Surveys Cloud computing Fault tolerance Technological innovation Scalability Fault tolerant systems computer architecture Software Software reliability

来源：评论

学校读者我要写书评

暂无评论

On modal observers for beyond rigid body H∞ control in high-precision mechatronics

arXiv

引用

arXiv 2022年

The ever increasing need for performance results in increasingly rigorous demands on throughput and positioning accuracy of high-precision motion systems, which often suffer from position dependent effects that originate from relative actuation and sensing of the moving-body. Due to the highly stiff mechanical design, such systems are typically controlled using rigid body control design approaches. Nonetheless, the presence of position dependent flexible dynamics severely limits attainable position tracking performance. This paper presents two extensions of the conventional rigid body control framework towards active control of position dependent flexible dynamics. Additionally, a novel control design approach is presented, which allows for shaping of the full closed-loop system by means of structured H∞ co-design. The effectiveness of the approach is validated through simulation using a high-fidelity model of a state-of-the-art moving-magnet planar *** Codes 37M15 © 2022, CC BY.

关键词： Closed loop systems

来源：评论

学校读者我要写书评

暂无评论

A Learning-Based Adaptive Compliance Method for Symmetric Bi-Manual Manipulation

SSRN

引用

SSRN 2024年

作者： Cao, Yuxue Zhao, Wenbo Wang, Shengjie Zheng, Xiang Ma, Wenke Zhao, Jiawei Zhang, Tao Beijing Institute of Control Engineering China Department of Automation Tsinghua University China Institute for Interdisciplinary Information Sciences Tsinghua University China Department of Computer Science City University of Hong Kong Hong Kong Qian Xuesen Laboratory of Space Technology China Department of Automatic Control Xi’an Research Institute of Hi-tech China

Symmetric bi-manual manipulation is an essential skill in on-orbit operations due to its potent load capacity. Previous works have applied compliant control to maintain the stability of manipulations. However, traditional methods have viewed motion planning and compliant control as two separate modules, which can lead to conflicts with the simultaneous change of the desired trajectory and impedance parameters in the presence of external forces and disturbances. Additionally, the joint usage of these two modules requires experts to manually adjust parameters. To achieve high efficiency while enhancing adaptability, we propose a novel Learning-based Adaptive Compliance algorithm (LAC) that improves the efficiency and robustness of symmetric bi-manual manipulation. Specifically, the algorithm framework integrates desired trajectory generation and impedance-parameter adjustment under a unified framework to mitigate contradictions and improve efficiency. Second, we introduce a centralized Actor-Critic framework with LSTM networks preprocessing the force states, enhancing the synchronization of bi-manual manipulation. When evaluated in dual-arm cooperative handling and peg-in-hole assembly experiments, our method outperforms baseline algorithms in terms of optimality and robustness. © 2024, The Authors. All rights reserved.

关键词： Motion planning

来源：评论

学校读者我要写书评

暂无评论

Backflipping with Miniature Quadcopters by Gaussian Process Based control and Planning

arXiv

引用

arXiv 2022年

作者： Antal, Péter Péni, Tamás Tóth, Roland The Systems and Control Laboratory Institute for Computer Science and Control Budapest Hungary The Vehicle Industry Research Center Széchenyi István University Hungary The Control Systems Group The Eindhoven University of Technology Netherlands

The paper proposes two control methods for performing a backflip maneuver with miniature quadcopters. First, an existing feedforward control approach is improved by finding the optimal sequence of motion primitives via Bayesian optimization, using a surrogate Gaussian Process model. To evaluate the cost function, the flip maneuver is performed repeatedly in a simulation environment. The second method is based on closed-loop control and it consists of two main steps: first a novel robust, adaptive controller is designed to provide reliable reference tracking even in case of model uncertainties. The controller is constructed by augmenting the nominal model of the drone with a Gaussian Process that is trained by using measurement data. Second, an efficient trajectory planning algorithm is proposed, which designs feasible trajectories for the flip maneuver by using only quadratic programming. The two approaches are analyzed in simulations and in real experiments using Bitcraze Crazyflie 2.1 quadcopters. © 2022, CC BY-NC-SA.

关键词： Quadratic programming

来源：评论

学校读者我要写书评

暂无评论

Implicit smoothed particle hydrodynamics model for simulating incompressible fluid-elastic coupling

Implicit smoothed particle hydrodynamics model for simulatin...

引用

作者： Wang, Xiaokun Wang, Tiancheng Wang, Jiamin Xu, Yanrui Ban, Xiaojuan Huang, Houbin Zhu, Zhihong Chang, Jian Zhang, Jian Jun School of Intelligence Science and Technology University of Science and Technology Beijing Beijing China Beijing Key Laboratory of Knowledge Engineering for Materials Science University of Science and Technology Beijing Beijing China National Centre for Computer Animation Bournemouth University Poole United Kingdom Beijing Advanced Innovation Center for Materials Genome Engineering University of Science and Technology Beijing Beijing China Key Laboratory of Perception and Control of Intelligent Bionic Unmanned Systems Ministry of Education University of Science and Technology Beijing Beijing China Chinese PLA General Hospital Beijing China Hainan Hospital of Chinese PLA General Hospital Hainan Sanya China

Fluid simulation has been one of the most critical topics in computer graphics for its capacity to produce visually realistic effects. The intricacy of fluid simulation manifests most with interacting dynamic elements. The coupling for such scenarios has always been challenging to manage due to the numerical instability arising from the coupling boundary between different elements. Therefore, we propose an implicit smoothed particle hydrodynamics fluid-elastic coupling approach to reduce the instability issue for fluid-fluid, fluid-elastic, and elastic-elastic coupling circumstances. By deriving the relationship between the universal pressure field with the incompressible attribute of the fluid, we apply the number density scheme to solve the pressure Poisson equation for both fluid and elastic material to avoid the density error for multi-material coupling and conserve the non-penetration condition for elastic objects interacting with fluid particles. Experiments show that our method can effectively handle the multiphase fluids simulation with elastic objects under various physical properties. © 2023 The Authors. computer Animation and Virtual Worlds published by John Wiley & Sons Ltd.

关键词： Poisson equation

来源：评论

学校读者我要写书评

暂无评论

A Cyclic Small Phase Theorem for MIMO LTI systems*

引用

IFAC-PapersOnLine 2023年第2期56卷 1883-1888页

作者： Chao Chen Wei Chen Di Zhao Jianqi Chen Li Qiu Department of Electronic and Computer Engineering The Hong Kong University of Science and Technology Hong Kong China Department of Mechanics and Engineering Science & State Key Laboratory for Turbulence and Complex Systems Peking University Beijing China Department of Control Science and Engineering & Shanghai Institute of Intelligent Science and Technology Tongji University Shanghai China

This paper introduces a brand-new phase definition called the segmental phase for multi-input multi-output linear time-invariant systems. The underpinning of the definition lies in the matrix segmental phase which, as its name implies, is graphically based on the smallest circular segment covering the matrix normalized numerical range in the unit disk. The matrix segmental phase has the crucial product eigen-phase bound, which makes itself stand out from several existing phase notions in the literature. The proposed bound paves the way for stability analysis of a cyclic feedback system consisting of multiple subsystems. A cyclic small phase theorem is then established as our main result, which requires the loop system phase to lie between -π and π. The proposed theorem complements the celebrated small gain theorem.

关键词： Small phase theorem segmental phase cyclic feedback systems stability analysis lead-lag compensation

来源：评论

学校读者我要写书评

暂无评论

A Review of RPL Based Routing Protocols in Vehicular Ad Hoc Networks (VANET)

A Review of RPL Based Routing Protocols in Vehicular Ad Hoc ...

引用

Mechatronic systems Supervision (IW_MSS), IEEE International Workshop on

作者： Wafa Akermi Nouha Alyaoui Awatef Benfradj Guiloufi Karim Chabir Automatic Industrial Systems Department Higher Institute of Applied Sciences and Technology Gafsa University Gafsa Tunisia Laboratory of Modeling Analysis and Control of Systems (MACS) National Engineering School of Gabes (ENIG) Gabes University Gabes Tunisia Computer Science and Telecommunications Department Higher Institute of Applied Sciences and Technology Gafsa University Gafsa Tunisia Preparatory Institute for Engineering Studies of Gabes Laboratory of Modeling Analysis and Control of Systems (MACS) National Engineering School of Gabes (ENIG) Gabes University Gabes Tunisia

In the present day, the Internet of Things is becoming more and more popular. Enabling continuous connectivity and packet routing in this kind of network is difficult because of the resource limitations that are a feature of IoT. Reduce end-to-end latency, conserve energy, and balance network load are the three basic objectives of lightweight routing protocol. In this paper, we give a quick review of the IPv6 Routing Protocol for Low-Power and Lossy Networks-based routing protocols of VANET already in use and discuss their advantages and disadvantages. More specifically, we examine a few chosen VANET routing protocols and contrast their performance based on metrics like packet delivery ratio, Throughput, End to end delay, Routing- Cost, etc.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Automation 5.0: The Key to systems Intelligence and Industry 5.0

引用

IEEE/CAA Journal of automatica Sinica 2024年第8期11卷 1723-1727页

作者： Ljubo Vlacic Hailong Huang Mariagrazia Dotoli Yutong Wang Petros A.Ioannou Lili Fan Xingxia Wang Raffaele Carli Chen Lv Lingxi Li Xiaoxiang Na Qing-Long Han Fei-Yue Wang Institute of Intelligent and Integrated Systems and the School of Engineering and Built Environment Griffith UniversityNathanQLD 4111Australia Department of Aeronautical and Aviation Engineering The Hong Kong Polytechnic UniversityHong KongChina Department of Electrical and Information Engineering Polytechnic of Bari70126 BariItaly State Key Laboratory of Multimodal Artificial Intelligence Systems Institute of AutomationChinese Academy of SciencesBeijing 100190and also with the Qingdao Academy of Intelligent IndustriesQingdao 266114China Department of Electrical Engineering-Systems University of Southern CaliforniaLos AngelesCA 90007 USA School of Automation Beijing Institute of TechnologyBeijing 100081China State Key Laboratory of Multimodal Artificial Intelligence Systems Institute of AutomationChinese Academy of SciencesBeijing 100190 School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100049 Beijing Huairou Academy of Parallel Sensing Beijing 101499China School of Mechanical and Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore Department of Electrical and Computer Engineering Purdue School of Engineering and TechnologyIndiana University-Purdue University IndianapolisIndianapolisIN 46202 USA Department of Engineering University of CambridgeCB21TN CambridgeU.K. School of Science Computing and Engineering TechnologiesSwinburne University of TechnologyMelbourne VIC 3122Australia State Key Laboratory for Management and Control of Complex Systems Chinese Academy of SciencesBeijing 100190 School of Artificial Intelligence University of Chinese Academy of SciencesBeijing 100049China Dazhou Artificial Intelligence Institute Dazhouand the Faculty of Innovation EngineeringMacao University of Science and TechnologyMacao 999078China

AUTOMATION has come a long way since the early days of mechanization,i.e.,the process of working exclusively by hand or using animals to work with *** rise of steam engines and water wheels represented the first generation of industry,which is now called Industry Citation:***,***,***,***,***,***,***,***,***,***,***,Q.-***,and F.-***,“Automation 5.0:The key to systems intelligence and Industry 5.0,”IEEE/CAA ***,vol.11,no.8,pp.1723-1727,Aug.2024.

关键词： Automation machinery intelligence

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：