检索结果-内蒙古大学图书馆

arXiv 2020年

作者： Gong, Tierui Yang, Zhijia Zheng, Meng Liu, Zhifeng Wang, Gengshan Key Laboratory of Robotics the Key Laboratory of Networked Control Systems Shenyang Institute of Automation Chinese Academy of Sciences Shenyang 110016 China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang 110169 China University of Chinese Academy of Sciences Beijing 100049 China State Key Laboratory of Robotics Key Laboratory of Networked Control Systems Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110016 China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang 110169 China

Compressive subspace learning (CSL) with the exploitation of space diversity has found a potential performance improvement for wideband spectrum sensing (WBSS). However, previous works mainly focus on either exploiting antenna auto-correlations or adopting a multiple-input multiple-output (MIMO) channel without considering the spatial correlations, which will degrade their performances. In this paper, we consider a spatially correlated MIMO channel and propose two CSL algorithms (i.e., mCSLSACC and vCSLACC) which exploit antenna cross-correlations, where the mCSLSACC utilizes an antenna averaging temporal decomposition, and the vCSLACC uses a spatial-temporal joint decomposition. For both algorithms, the conditions of statistical covariance matrices (SCMs) without noise corruption are derived. Through establishing the singular value relation of SCMs in statistical sense between the proposed and traditional CSL algorithms, we show the superiority of the proposed CSL algorithms. By further depicting the receiving correlation matrix of MIMO channel with the exponential correlation model, we give important closed-form expressions for the proposed CSL algorithms in terms of the amplification of singular values over traditional CSL algorithms. Such expressions provide a possibility to determine optimal algorithm parameters for high system performances in an analytical way. Simulations validate the correctness of this work and its performance improvement over existing works in terms of WBSS performance. Copyright © 2020, The Authors. All rights reserved.

关键词： Cognitive radio

来源：评论

学校读者我要写书评

暂无评论

Sensor-less Complex System control of PMSM Based on Improved SMO

Sensor-less Complex System Control of PMSM Based on Improved...

引用

作者： Yingjie Xiong Anna Wang Tao Zhang College Of Information Science and Engineering Northeastern University Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang Institute of Automation Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences School of Electrical Engineering Dalian University of Technology

The sensor-less control system of PMSM is complicated,and it is of great significance to carry out accurate mathematical modeling and simulation *** is small in size,high in efficiency,and low in noise,so it is very popular in AC motor *** have been widely used in various electrical appliances such as machine tools,robots,and household *** order to reduce the high-frequency chatter of the sensor-less control strategy of permanent magnet synchronous motors,a sensor-less control method based on improved SMO is *** back-EMF component in the static coordinate system is obtained through the *** backEMF component undergoes closed-loop feedback to eliminate the high-frequency *** back-EMF component is calculated by an improved PLL to obtain the position and speed of the rotor to improve system *** the end of the article,the feasibility is proved by comparing it with the simulation of conventional SMO-PLL.

关键词： PMSM SMO with closed-loop feed back improved PLL

来源：评论

学校读者我要写书评

暂无评论

Design and Implementation of Functional Safety Fieldbus Communication Protocol

Design and Implementation of Functional Safety Fieldbus Comm...

引用

IEEE Advanced Information Technology, Electronic and Automation control Conference (IAEAC)

作者： Xiufang Zhou Aidong Xu Bingjun Yan Yue Sun Xiaojia Han Jingran Wang Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China

ISBN: (数字)9781728180281

ISBN: (纸本)9781728180298

Based on the requirements of safety communication in the safety instrumented system (SIS), a fieldbus functional safety communication protocol is proposed in this paper. According to the reasons of communication failure, several safety measures are used implicitly or explicitly to detect the error in the transmission. They include connection authentication, time stamp, sequence number and cyclic redundancy check (CRC). The communication architecture of full redundancy is structured to improve the reliability of communication system. Finally, the calculation results of the residual error rate show that the proposed functional safety fieldbus communication protocol meets the requirements of the safety integrity level (SIL) 3.

关键词： Protocols Error analysis Instruments Redundancy Measurement uncertainty Safety Reliability

来源：评论

学校读者我要写书评

暂无评论

An Integral Sliding-Mode Parallel control Approach for General Nonlinear Systems via Piecewise Affine Linear Models

arXiv

引用

arXiv 2021年

作者： Zhang, Chunyang Gao, Qing Deng, Yue Qiu, Jianbin School of Automation Science and Electrical Engineering Beihang University Beijing China Zhongguancun Laboratory Beijing China School of Astraunotics Beihang University Beijing China State Key Laboratory of Robotics and Systems Harbin Institute of Technology Harbin China Research Institute of Intelligent Control and Systems Harbin Institute of Technology Harbin China

The fundamental problem of stabilizing a general non-affine continuous-time nonlinear system is investigated via piecewise affine linear models (PALMs) in this paper. A novel integral sliding-mode parallel control (ISMPC) approach is developed, where an uncertain piecewise affine system (PWA) is constructed to model a non-affine continuous-time nonlinear system equivalently on a compact region containing the origin. A piecewise sliding-mode parallel controller is designed to globally stabilize the PALM and, consequently, to semi-globally stabilize the original nonlinear system. The proposed scheme enjoys three favorable features: i) some restrictions on the system input channel are eliminated, thus the developed method is more relaxed compared with the published approaches;ii) it is convenient to be used to deal with both matched and unmatched uncertainties of the system;and (iii) the proposed piecewise parallel controller generates smooth control signals even around the boundaries between different subspaces, which makes the developed control strategy more implementable and reliable. Moreover, we provide discussions about the universality analysis of the developed control strategy for two kinds of typical nonlinear systems. Simulation results from two numerical examples further demonstrate the performance of the developed control approach. Copyright © 2021, The Authors. All rights reserved.

关键词： Nonlinear systems

来源：评论

学校读者我要写书评

暂无评论

Application of Iterative Learning control in X-Y Precision Planar Motion Platform

Application of Iterative Learning Control in X-Y Precision P...

引用

2021 China Automation Congress, CAC 2021

作者： Yan, Hongyu Jia, Danping Zhang, Tao Zhang, Hualiang Xiong, Yingjie Lu, Xu Liu, Yang School of Artificial Intelligence Shenyang University of Technology Shenyang China School of Information Science and Engineering Shenyang University of Technology Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China School of Electrica l Engineering Dalian University of Technology Dalian China College Of Information Science and Engineering Northeastern University Shenyang China

ISBN: (纸本)9781665426473

The size of the tracking error is one of the important indicators to measure the control system of the X-Y Precision Planar Motion Platform. Iterative learning control (ILC) can obtain higher tracking accuracy through multiple iterations. However, it is found in experiments that the tracking error of the XY precision motion stage using ordinary PD-type iterative learning will eventually fluctuate in a relatively range, and some high-frequency Noise will seriously affect the stability of the system after many iterations. Aiming at the above problems, a PD-type variable gain open-closed loop ILC with a low-pass filter is proposed. This control scheme can effectively remove high-frequency noise and reduce tracking errors. Finally, a hardware-in-the-loop real-time simulator is used to conduct a comparative experiment. Through comparison with PID controller and ordinary PD-type ILC, the experimental consequence show that this arithmetic has a smaller tracking error than the other two algorithms. © 2021 IEEE

关键词： Low pass filters

来源：评论

学校读者我要写书评

暂无评论

Position control of XY precision planar motion table based on input shaping filter

Position control of XY precision planar motion table based o...

引用

作者： HuaLiang Zhang Xu Lu DanPing Jia BingJie Zhao Tao Zhang Yang Liu HongYu Yan Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang Institute of Automation Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences School of Artificial Intelligence Shenyang University of Technology School of Information Science and Engineering Shenyang University of Technology

In order to solve the vibration problem of mining equipment,a Simulink simulation model of current loop,speed loop and position loop of permanent magnet synchronous motor was established to track the input position signal of the motor system.[1] At the same time,the input shaper is introduced into the motor three loop control model to study the vibration suppression effect of the input shaper.[2] The essence of the input shaper is to filter the input ***,the parameters of the input shaper need to be accurately identified and the detailed parameters of the system need to be ***,the problem that the identification accuracy of the system is not enough often makes the parameters of the shaper *** view of the problem that the system identification is not accurate,a method of adjusting and setting input shaper parameters is designed,which is not very dependent on the *** results show that the optimal parameters of the shaper can be selected by the *** with the parameters of the shaper selected according to the identification model,the vibration suppression effect is better.

关键词： system identification input shaping oscillation suppression

来源：评论

学校读者我要写书评

暂无评论

Effective Decoupled Planning for Continuous Multi-Agent Pickup and Delivery

Effective Decoupled Planning for Continuous Multi-Agent Pick...

引用

第32届中国控制与决策会议

作者： Zhenbang Nie Peng Zeng Haibin Yu State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Key Laboratory of Networked Control Systems Chinese Academy of Sciences University of Chinese Academy of Sciences

Continuous MAPD（Multi-Agent Pickup and Delivery） problem is widely encountered in material transportation ***（Token Passing） is a conflict-free,deadlock-free algorithm for continuous MAPD ***,when TP is used,the number of tasks simultaneously handled by agents is limited by the number of task endpoint *** solve this problem,ITP（Improved Token Passing） is proposed in this *** extra path planning procedure is introduced to improve agent utilization.A complete and optimal A*-based algorithm is designed to solve the low level single agent path planning *** increases system throughput by exploiting all available agents,and remains conflict-free and *** result shows that ITP outperforms TP in terms of system makespan under heavy workload in congested workspace.

关键词： Multi-Agent Pickup and Delivery Multi-Agent Path Finding Decoupled Path Planning

来源：评论

学校读者我要写书评

暂无评论

Robotic Electrospinning Actuated by Non-Circular Joint Continuum Manipulator for Endoluminal Therapy

arXiv

引用

arXiv 2021年

作者： Wu, Zicong Lou, Chuqian Jin, Zhu Huang, Shaoping Liu, Ning Zou, Yun Kovac, Mirko Gao, Anzhu Yang, Guang-Zhong Institute of Medical Robotics Department of Bioengineering Shanghai Jiao Tong University Shanghai200240 China Imperial College London Empa Swiss Federal Laboratories for Materials Science and Technology Limited Hong Kong999077 Hong Kong Aerial Robotics Laboratory Imperial College London LondonSW7 2AZ United Kingdom Institute of Medical Robotics Department of Automation Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education Shanghai200240 China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai200240 China Institute of Medical Robotics Shanghai Jiao Tong University Shanghai200240 China

Electrospinning has exhibited excellent benefits to treat the trauma for tissue engineering due to its produced micro/nano fibrous structure. It can effectively adhere to the tissue surface for long-term continuous therapy. This paper develops a robotic electrospinning platform for endoluminal therapy. The platform consists of a continuum manipulator, the electrospinning device, and the actuation unit. The continuum manipulator has two bending sections to facilitate the steering of the tip needle for a controllable spinning direction. Non-circular joint profile is carefully designed to enable a constant length of the centreline of a continuum manipulator for stable fluid transmission inside it. Experiments are performed on a bronchus phantom, and the steering ability and bending limitation in each direction are also investigated. The endoluminal electrospinning is also fulfilled by a trajectory following and points targeting experiments. The effective adhesive area of the produced fibre is also illustrated. The proposed robotic electrospinning shows its feasibility to precisely spread more therapeutic drug to construct fibrous structure for potential endoluminal treatments. © 2021, CC BY-NC-SA.

关键词： Electrospinning

来源：评论

学校读者我要写书评

暂无评论

Visual Object Detection Based LiDAR Point Cloud Classification

Visual Object Detection Based LiDAR Point Cloud Classificati...

引用

International Conference on Big Data and Smart Computing (BIGCOMP)

作者： Sualeh Muhammad Gon-Woo Kim Intelligent Robotics Laboratory Control and Robot Engineering Department Chungbuk National University Cheongju Republic of Korea Chungbuk National University Cheongju South Korea

ISBN: (数字)9781728160344

ISBN: (纸本)9781728160351

The environmental perception plays a pivotal role in autonomous driving tasks and demands robustness in cluttered dynamic environments such as complex urban scenarios. LiDAR being one of the popular perceptual sensor, suffers with large number of inaccurate object detections. This work is an extension of an ongoing research on multiple object detection and tracking. Where, Neural Network based approach is considered for visual detection to aid the LiDAR point cloud processing, and to address the inherent shortcoming of the sensor. It is inferred that the proposed framework would perform in real-time on an embedded platform. In addition, the separate processing of visual and LiDAR sensor data will enable switching to a light weight LiDAR only setup in runtime when required.

关键词： Three-dimensional displays Laser radar Object detection Visualization Robot sensing systems Task analysis Cameras

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation analysis and optimization of modular joint temperature field based on ANSYS

Numerical simulation analysis and optimization of modular jo...

引用

第33届中国控制与决策会议

作者： Tao Zhang Wenjing Xu Zizhao Huang Zhenqiang Yang Xiyou Chen Bingjie Zhao Hualiang Zhang School of Electrical Engineering Dalian University of Technology Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Key Laboratory of Networked Control Systems Chinese Academy of Sciences CRRC DALIAN R&D CO. LTD. University of Chinese Academy of Sciences

In the low-speed state,temperature change has a significant impact on the working efficiency of a harmonic ***,since modular joints used in collaborative robots arbitrarily arrange nodes and meshes through the Finite Element Method(FEM),a temperature field calculation model of the integrated joints was established in this *** utilizing the ANSYS software,a steady-state temperature field distribution of the modular joint was calculated,and the temperature rise of the harmonic reducer was reduced by changing the thermal *** the results demonstrated that the method was effective,which is very important for the safe operation and performance improvement of modular j oints.

关键词： harmonic reducer modular joint Finite Element Method Temperature Field ANSYS

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：