检索结果-内蒙古大学图书馆

SENSITIVITY OF FRONT-FACE WELD GEOMETRY IN REPRESENTING THE FULL PENETRATION

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF engineering MANUFACTURE 1992年第3期206卷 191-197页

作者： ZHANG, YM KOVACEVIC, R WU, L National Laboratory for Welding Harbin Institute of Technology Harbin People's Republic of China Center for Robotics and Manufacturing Systems and Department of Mechanical Engineering University of Kentucky USA

The measurement of weld penetration using a front-face sensor has been an important issue in welding automation. The fundamental problem is to find a measurable front-face parameter that can adequately represent the weld penetration. In this paper, both the front-face average weld depression depth (a novel weld geometrical parameter) and the weld width are selected as possible representations of full penetration in GTA welding. Two types of sensitivities of front-face weld geometry, with respect to variations in welding conditions and with respect to control variables, are proposed as criteria for determination of promising parameters. Sensitivity calculation of experimental data shows that the front-face weld width is not promising while the average front-face weld depression depth is. This conclusion is also confirmed by a specific experiment and statistic models.

关键词： Welds

来源：评论

学校读者我要写书评

暂无评论

A review of structures,verification,and calibration technologies of space robotic systems for on-orbit servicing

引用

Science China(Technological Sciences) 2021年第3期64卷 462-480页

作者： DING XiLun WANG YeCong WANG YaoBing XU Kun Robotics Institute Beihang UniversityBeijing 100191China Beijing Institute of Spacecraft System Engineering Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and ApplicationsBeijing 100094China

Recently,with the rapid development of aerospace technology,an increasing number of spacecraft is being launched into ***,the demands for on-orbit servicing(OOS)missions are rapidly *** robotics is one of the most promising approaches for various OOS missions;thus,research on space robotics technologies for OOS has attracted increased attention from space agencies and universities *** this paper,we review the structures,ground verification,and onorbit kinematics calibration technologies of space robotic systems for ***,we systematically summarize the development of space robotic systems and OOS programs based on space ***,according to the structures and applications,these systems are divided into three categories:large space manipulators,humanoid space robots,and small space *** to the capture mechanisms adopted,the end-effectors are systematically ***,the ground verification facilities used to simulate a microgravity environment are summarized and ***,the on-orbit kinematics calibration technologies are discussed and analyzed compared with the kinematics calibration technologies of industrial manipulators with regard to four ***,the development trends of the structures,verification,and calibration technologies are discussed to extend this review work.

关键词： space robotic system on-orbit servicing large space manipulator humanoid space robot verification kinematics calibration

来源：评论

学校读者我要写书评

暂无评论

Compressive and energy absorption properties of titanium hybrid lattice structures for bioimplant applications fabricated via LPBF

引用

Materials and Design 2025年 254卷

作者： Karmiris-Obratański, Panagiotis Georgakopoulos-Soares, Ilias Cichocki, Kamil Lisiecka-Graca, Paulina Papazoglou, Emmanouil L. Advanced Manufacturing Laboratory Department of Manufacturing Systems Faculty of Mechanical Engineering and Robotics AGH University of Krakow Krakow Poland School of Chemical Engineering Department of Materials Science and Engineering National Technical University of Athens Heroon Polytechniou 9 Athens15780 Greece Institute for Personalized Medicine Department of Biochemistry and Molecular Biology The Pennsylvania State University College of Medicine HersheyPA United States Faculty of Metals Engineering and Computer Science AGH University of Krakow Adama Mickiewicza Ave. 30 Kraków30-059 Poland School of Mechanical Engineering Section of Manufacturing Technology National Technical University of Athens Heroon Polytechniou 9 Athens15780 Greece

The compressive properties of lattice structures are strongly influenced by lattice design, density, material, and manufacturing method. Recent advancements in manufacturing, particularly Additive Manufacturing, have enabled the fabrication of complex lattice structures from advanced materials. Building on this progress, the present study investigates the compressive properties and energy absorption capabilities of four distinct lattice structures at three relative densities (20 %, 30 %, and 40 %), specifically tailored for implant applications. The lattices, fabricated from Ti6Al4V ELI alloy using the Laser Powder Bed Fusion (LPBF) method, include a hybrid Fluorite-BCC lattice, a SplitP TPMS skeletal lattice, a stochastic Voronoi lattice, and a hybrid Voronoi-TPMS Gyroid lattice. Compressive properties, including the Elastic Modulus of Compression (EMC), Compressive Yield Strength, and Ultimate Compressive Strength, were systematically analyzed alongside energy absorption capabilities. The Gibson-Ashby model was employed to quantify the relationship between compressive properties and relative density. Additionally, Digital Image Correlation and high-resolution imaging during compression tests provided detailed insights into deformation mechanisms and collapse behavior. The findings offer valuable insights into the compressive performance of these novel hybrid lattices, highlighting their potential applicability in bioimplant applications, with the Fluorite-BCC lattice exhibits the highest EMC and the Fluorite-BCC and SplitP lattices exhibit higher energy absorption capabilities. © 2025 The Author(s)

关键词： Machinability

来源：评论

学校读者我要写书评

暂无评论

The efficiency of supplement schema for IBVS algorithms

The efficiency of supplement schema for IBVS algorithms

引用

IEEE International Symposium on Industrial Electronics 2005, ISIE 2005

作者： Bonković, Mirjana Stipaniçev, Darko Ştula, Maja Laboratory for Robotics and Intelligent Systems Faculty of Electrical Engineering Mechanical Engineering and Naval Architecture University of Split

ISBN: (纸本)0780387384

In, this, paper, we, propose, a, special, geometric, feature, parameter, supplement, schema, for, IBVS, systems, in, which, the, servoing, is, based, on, the, point, to, point, correspondences., The, proposed, algorithm, with, special, feature, parameters, is, compared, with, the, "classic", feature, parameters, algorithm., Simulation, results, show, that, supplement,schema,improves,the,convergence,rate,and,the,stability,of,the,visual, servoing,system., © 2005 IEEE.

关键词： Servomechanisms

来源：评论

学校读者我要写书评

暂无评论

ADAPTIVE EDGE-FOLLOWING FORCE CONTROL OF AN INDUSTRIAL ROBOT

引用

robotics AND COMPUTER-INTEGRATED MANUFACTURING 1989年第4期6卷 331-337页

作者： LIOU, JN JAMSHIDI, M STARR, GP CAD Laboratory for Systems/Robotics Department of Electrical and Computer Engineering University of New Mexico Albuquerque NM 87131 United States Robotic Research Laboratory Department of Mechanical Engineering University of New Mexico Albuquerque NM 87131 United States

Control of tool-workpiece interaction force is of vital importance in automated assembly. Using a simple linear continuous model of an edge-following system to predict the appropriate accomodation gains in a force control loop, previous work has shown that force control by accomodation is feasible. Following up this work, this paper describes the analysis, simulation and implementation of an adaptive force control in a two-dimensional edge-following task with a PUMA 560 robot and wrist force sensor. First, a discrete-time model of an edge-following system is developed and then used as the plant; second, a model reference adaptive control (MRAC) scheme is applied to achieve both tracking and regulation purposes. The reference (tracking) model can be determined by experimental reference input and desired model output information; the reference (regulation) model can be obtained by simulation to smooth out the plant output and improve the augmented filtered plant-model error. Study is done on the values of the adaptation gains in the adaptive mechanism, and hence can be adjusted to insure the best plant output performance.

关键词： Robots, Industrial

来源：评论

学校读者我要写书评

暂无评论

Micro-pores formation mechanism and porosity on the fatigue performance of dual laser-powder bed fusion of Ti6Al4V

引用

International Journal of Fatigue 2025年 199卷

作者： Guotai Li Peichen Hu Gang Chen Mingjun Chen Tianyu Yu State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin Heilongjiang 150001 China Key Laboratory of Micro-systems and Micro-structures Manufacturing Ministry of Education Harbin Heilongjiang 150001 China Institute of Electronic Engineering China Academy of Engineering Physics Mianyang Sichuan 621000 China

Porosity significantly impacts the fatigue performance and stability of dual laser additively manufactured metallic materials. This study presents a comparative analysis of the fatigue behavior of samples fabricated by single-laser powder bed fusion (SL-PBF) and dual-laser PBF (DL-PBF). It shows that porosity defects in the overlap region reduced the fatigue strength of DL-PBF samples by nearly 20 %. Micro-CT analysis revealed that micro-pores in the SL-PBF samples were predominantly located in the contour regions. Machining with a removal depth of 0.5 mm has effectively eliminated over 90 % of internal porosity defects. For monolithic specimens, increasing the sample size and reducing the layer-wise slice area can improve the sphericity of the internal defects (0.71 to 0.85) and reduce the porosity density (0.19 % to 0.011 %). Molecular dynamics simulations further examined the influence of pore size, spacing, and quantity on fatigue behavior. Larger pore sizes promote the formation of {11 2 ¯ 1} < 1 ¯ 1 ¯ 26> twin variants, as the pore diameter increased from 20 Å to 80 Å, the proportion of variants structure increased from 3.6 % to 11.5 %. Fatigue failure initiated from a single pore, with stress propagating towards a distant pore, forming crack paths. Stress was relieved along these crack trajectories, leading to secondary crack branches that spread into low-stress zones around other defects, which resulted in fatigue cracks with vein-like morphologies. This work provides systematic insights into the fatigue degradation mechanisms induced by porosity and offers actionable strategies for improving the fatigue resistance of multi-laser PBF components through process control.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Multiscale Convolutional Transformer with Diverse-aware Feature Learning for Motor Imagery EEG Decoding

引用

IEEE Transactions on Cognitive and Developmental systems 2025年

作者： Hang, Wenlong Wang, Junliang Liang, Shuang Lei, Baiying Wang, Qiong Li, Guanglin Chen, Badong Qin, Jing Nanjing Tech University College of Computer Nanjing211816 China Nanjing Tech University Information Engineering Nanjing211816 China Nanjing University of Posts and Telecommunications School of Internet of Things Nanjing210023 China Shenzhen University School of Biomedical Engineering Shenzhen518060 China Guangdong Provincial Key Laboratory of Computer Vision Shenzhen518055 China Virtual Reality Technology Shenzhen518055 China Guangdong-Hong Kong-Macao Joint Laboratory of Human-Machine Intelligence-Synergy Systems Shenzhen518055 China Shenzhen Institute of Advanced Technology Shenzhen518055 China Chinese Academy of Sciences Shenzhen518055 China Xi'an Jiaotong University Institute of Artificial Intelligence and Robotics Xi'an710049 China Hong Kong Polytechnic University School of Nursing Hung Hom Hong Kong

Electroencephalogram (EEG)-based motor imagery (MI) brain-computer interfaces (BCIs) have significant potential in improving motor function for neurorehabilitation. Despite recent advancements, learning diversified EEG features across different frequency ranges remains a significant challenge, as the homogenization of feature representations often limits the generalization capabilities of EEG decoding models for BCIs. In this paper, we propose a novel multiscale convolutional transformer framework for EEG decoding that integrates multiscale convolution, transformer, and diverse-aware feature learning scheme (MCTD) to tackle the above challenge. Specifically, we first capture multiple frequency features using dynamic one-dimensional temporal convolution with different kernel lengths. Subsequently, we incorporate convolutional layers and transformers with a contrastive learning scheme to extract discriminative local and global EEG features within a single frequency range. To mitigate the homogenization of features extracted from different frequency ranges, we propose a novel decorrelation regularization. It enables multiscale convolutional transformers produce less correlated features with each other, thereby enhancing the overall expressiveness of EEG decoding model. The performance of MCTD is evaluated on four public MI-based EEG datasets, including the BCI competition III 3a and IV 2a, the BNCI 2015- 001, and the OpenBMI. For the average Kappa/Accuracy scores, MCTD obtains improvements of 3.58%/2.68%, 3.09%/2.20%, 2.33%/1.54%, and 4.44%/2.22%, over the state-of-the-art method on four EEG datasets, respectively. Experimental results demonstrate that our method exhibits superior performance. © 2016 IEEE.

关键词： Brain computer interface

来源：评论

学校读者我要写书评

暂无评论

Bifunctional nanoprobe for simultaneous detection of intracellular reactive oxygen species and temperature in single cells

引用

Microsystems & Nanoengineering 2024年第6期10卷 161-172页

作者： Yanmei Ma Weikang Hu Jian Hu Muyang Ruan Jie Hu Ming Yang Yi Zhang Hanhan Xie Chengzhi Hu Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems Department of Mechanical and Energy EngineeringSouthern University of Science and TechnologyShenzhen 518000China Department of Electrical and Electronic Engineering Southern University of Science and TechnologyShenzhen 518000China

Living cells can rapidly adjust their metabolic activities in response to external stimuli,leading to fluctuations in intracellular temperature and reactive oxygen species(ROS)*** these parameters is essential for understanding cellular metabolism,particularly during dynamic biological *** this study,we present a bifunctional nanoprobe capable of simultaneous measurement of ROS levels and temperature within single *** nanoprobe features two individually addressable nanoelectrodes,with platinum(Pt)and nickel(Ni)coatings on both *** the tip,these two metal layers form a nano-thermocouple,enabling precise intracellular temperature measurements,while the Pt layer facilitates selective ROS *** dual functionality allows for real-time monitoring of cellular responses during synergistic chemo-photothermal therapy of cancer cells and zebrafish embryos subjected to mitochondrial toxic *** results demonstrate that the nanoprobe effectively measures increases in temperature and ROS levels in HeLa cells undergoing chemo-photothermal therapy,as well as in chemically stimulated zebrafish *** providing detailed analysis of submicrometer-scale temperature and ROS variations within living cells,this nanoprobe offers valuable insights into cellular processes and holds promise for early disease detection and drug development.

关键词： metabolism simultaneous holds

来源：评论

学校读者我要写书评

暂无评论

Development of micro-and nanorobotics: A review

引用

Science China(Technological Sciences) 2019年第1期62卷 1-20页

作者： YANG Jia ZHANG Chuang WANG XiaoDong WANG WenXue XI Ning LIU LianQing State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences University of Chinese Academy of Sciences Emerging Technologies Institute Department of Industrial & Manufacturing Systems Engineering University of Hong Kong

Micro-and nanorobotic is an emerging field of research arising from the cross-fusion of micro/nano technology and robotics and has become an important part of robotics. Micro-and nanorobots have the advantages of small size, low weight, large thrust-toweight ratio, high flexibility, and high sensitivity. Due to the characteristics distinguishing from macroscopic robots, micro-and nanorobots have stimulated the research interest of the scientific community and opened up numerous application fields such as drug delivery and disease diagnosis. In the past 30 years, research on micro-and nanorobots has made considerable *** article provides a comprehensive overview of the development of these robots. First, the application of the robots is reviewed. Then, the key components of the robots are discussed separately, covering their actuation, design, fabrication and control. In addition, from the perspectives of intelligence and sensing, clinical applications, materials and performance, the challenges that may be encountered in the development of such robots in the future are discussed. Finally, the entire article is summarized, and concepts for future micro-and nanorobots are described.

关键词： micro-and nanorobots magnetic actuation manipulation biohybrid robot

来源：评论

学校读者我要写书评

暂无评论

Advances in atomic force microscopy for single-cell analysis

引用

Nano Research 2019年第4期12卷 703-718页

作者： Mi Li Ning Xi Yuechao Wang Lianqing Liu State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang 110016 China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang 110016 China Department of Industrial and Manufacturing Systems Engineering The University of Hong Kong Hong Kong 999077 China

Single-cell analysis has been considered as a promising way to uncover the underlying mechanisms guiding the mysteries of life activities, which con siderably complements traditio nal en semble assays and yields novel in sights into cell biology. The adve nt of atomic force microscopy (AFM) provides a potent tool for investigati ng the structures and properties of n ative biological samples at the micro/na no scale un der near-physiological conditions, which promotes the studies of single-cell behaviors. In the past decades, AFM has achieved great success in single-cell observation and manipulation for biomedical applications, demonstrating the excellent capabilities of AFM in addressing biological issues at the single-cell level with unprecedented spatiotemporal resolution. In this article, we review the recent advances in single-cell analysis that has been made with the utilization of AFM, and provide perspectives for future progression.

关键词： atomic force microscopy single-cell analysis cellular morphology cellular mechanics cellular manipulation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：