检索结果-内蒙古大学图书馆

IEEE Conference on Vehicular Technology (VTC)

作者： Yitian Wang Meng Zheng Haibin Yu Wei Liang State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Shenyang China University of Chinese Academy of Sciences Beijing China

ISBN: (纸本)9781665454698

Facing the dual challenges of massive access and time-sensitive traffics, grant-free non-orthogonal multiple access (GF-NOMA) emerges as a promising technology for implementing massive ultra-reliable and low-latency communications (mURLLC). In this paper, we propose a differentiated power level access (DPLA) policy that exploits the correlations among power levels of GF-NOMA, and implement DPLA by a dynamically distributed GF-NOMA framework. Further, a closed-form expression to the reliability of DPLA is analytically derived and the optimal framework parameters to maximize reliability are obtained. Finally, considering the traffic variation over time, we propose a dynamically-distributed differentiated-layered transmission $(\mathrm{D}^{3}$ LT) algorithm to improve the reliability online. Simulation results show that the proposed scheme in this work outweighs existing schemes in transmission reliability.

关键词： NOMA Vehicular and wireless technologies Correlation Closed-form solutions Simulation Heuristic algorithms Reliability

来源：评论

学校读者我要写书评

暂无评论

Robotic Electrospinning Actuated by Non-Circular Joint Continuum Manipulator for Endoluminal Therapy

Robotic Electrospinning Actuated by Non-Circular Joint Conti...

引用

2021 IEEE International Conference on robotics and Automation, ICRA 2021

作者： Wu, Zicong Lou, Chuqian Jin, Zhu Huang, Shaoping Liu, Ning Zou, Yun Kovac, Mirko Gao, Anzhu Yang, Guang-Zhong The Institute of Medical Robotics Department of Bioengineering Shanghai Jiao Tong University Shanghai200240 China Imperial College London Empa-Swiss Federal Laboratories for Materials Science and Technology United Kingdom Limited 999077 Hong Kong Aerial Robotics Laboratory Imperial College London LondonSW7 2AZ United Kingdom The Institute of Medical Robotics Department of Automation Shanghai Jiao Tong University The Key Laboratory of System Control and Information Processing Ministry of Education Shanghai200240 China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai200240 China The Institute of Medical Robotics Shanghai Jiao Tong University Shanghai200240 China

ISBN: (纸本)9781728190778

Electrospinning has exhibited excellent benefits to treat the trauma for tissue engineering due to its produced micro/nano fibrous structure. It can effectively adhere to the tissue surface for long-term continuous therapy. This paper develops a robotic electrospinning platform for endoluminal therapy. The platform consists of a continuum manipulator, the electrospinning device, and the actuation unit. The continuum manipulator has two bending sections to facilitate the steering of the tip needle for a controllable spinning direction. Non-circular joint profile is carefully designed to enable a constant length of the centreline of a continuum manipulator for stable fluid transmission inside it. Experiments are performed on a bronchus phantom, and the steering ability and bending limitation in each direction are also investigated. The endoluminal electrospinning is also fulfilled by a trajectory following and points targeting experiments. The effective adhesive area of the produced fibre is also illustrated. The proposed robotic electrospinning shows its feasibility to precisely spread more therapeutic drug to construct fibrous structure for potential endoluminal treatments. © 2021 IEEE

关键词： Electrospinning

来源：评论

学校读者我要写书评

暂无评论

FFPA-Net: Efficient Feature Fusion with Projection Awareness for 3D Object Detection

arXiv

引用

arXiv 2022年

作者： Jiang, Chaokang Wang, Guangming Wu, Jinxing Miao, Yanzi Wang, Hesheng Engineering Research Center of Intelligent Control for Underground Space Ministry of Education School of Information and Control Engineering Advanced Robotics Research Center China University of Mining and Technology Xuzhou221116 China Department of Automation Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China The Department of Engineering Mechanics Shanghai Jiao Tong University Shanghai200240 China

Promising complementarity exists between the texture features of color images and the geometric information of LiDAR point clouds. However, there still present many challenges for efficient and robust feature fusion in the field of 3D object detection. In this paper, first, unstructured 3D point clouds are filled in the 2D plane and 3D point cloud features are extracted faster using projection-aware convolution layers. Further, the corresponding indexes between different sensor signals are established in advance in the data preprocessing, which enables faster cross-modal feature fusion. To address LiDAR points and image pixels misalignment problems, two new plug- and-play fusion modules, LiCamFuse and BiLiCamFuse, are proposed. In LiCamFuse, soft query weights with perceiving the Euclidean distance of bimodal features are proposed. In BiLiCamFuse, the fusion module with dual attention is proposed to deeply correlate the geometric and textural features of the scene. The quantitative results on the KITTI dataset demonstrate that the proposed method achieves better feature-level fusion. In addition, the proposed network shows a shorter running time compared to existing methods. Copyright © 2022, The Authors. All rights reserved.

关键词： Object detection

来源：评论

学校读者我要写书评

暂无评论

Finite-time asynchronous dissipative filtering of conic-type nonlinear Markov jump systems

引用

Science China(Information Sciences) 2021年第5期64卷 151-162页

作者： Xiang ZHANG Shuping HE Vladimir STOJANOVIC Xiaoli LUAN Fei LIU Key Laboratory of Intelligent Computing and Signal Processing (Ministry of Education) School of Electrical Engineering and Automation Anhui University Department of Automatic Control Robotics and Fluid Technique Faculty of Mechanical and Civil EngineeringUniversity of Kragujevac Key Laboratory of Advanced Process Control for Light Industry (Ministry of Education) Institute of AutomationJiangnan University

In the present study, the finite-time asynchronous dissipative filter design problem for the Markov jump systems with conic-type nonlinearity is studied. The hidden Markov model can describe the asynchronism embodied in the system modes and the filter modes reasonably. Moreover, a suitable LyapunovKrasovskii function is utilized and linear matrix inequalities are applied to obtain adequate conditions. These techniques guarantee the finite-time boundedness and strict dissipativity of the filtering error dynamic system. Furthermore, the design problems of the passive filter and the H∞ filter are studied by adjusting the three parameters U, G and V. Finally, the filter gains and the optimal index α*are obtained and the correctness and feasibility of the designed approach are verified by a simulation example.

关键词： dissipative filtering hidden Markov model finite-time boundedness Markov jump systems conic-type nonlinearity

来源：评论

学校读者我要写书评

暂无评论

Autonomous inverse encoding guides 4D nanoprinting for highly programmable shape morphing

引用

International Journal of Extreme Manufacturing 2025年第03期 472-488页

作者： Shuaiqi Ren Zhiang Zhang Ruokun He Jiahao Fan Guangming Wang Hesheng Wang Bing Han Yong-Lai Zhang Zhuo-Chen Ma Department of Automation Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Engineering Research Center of Intelligent Control and Management Department of Engineering University of Cambridge Institute of Medical Robotics School of Biomedical Engineering Shanghai Jiao Tong University State Key Laboratory of Integrated Optoelectronics College of Electronic Science and EngineeringJilin University

Highly programmable shape morphing of 4D-printed micro/nanostructures is urgently desired for applications in robotics and intelligent systems. However, due to the lack of autonomous holistic strategies throughout the target shape input, optimal material distribution generation,and fabrication program output, 4D nanoprinting that permits arbitrary shape morphing remains a challenging task for manual design. In this study, we report an autonomous inverse encoding strategy to decipher the genetic code for material property distributions that can guide the encoded modeling toward arbitrarily pre-programmed 4D shape morphing. By tuning the laser power of each voxel at the nanoscale, the genetic code can be spatially programmed and controllable shape morphing can be realized through the inverse encoding process. Using this strategy, the 4D-printed structures can be designed and accurately shift to the target morphing of arbitrarily hand-drawn lines under stimulation. Furthermore, as a proof-of-concept, a flexible fiber micromanipulator that can approach the target region through pre-programmed shape morphing is autonomously inversely encoded according to the localized spatial *** strategy may contribute to the modeling and arbitrary shape morphing of micro/nanostructures fabricated via 4D nanoprinting, leading to cutting-edge applications in microfluidics, micro-robotics, minimally invasive robotic surgery, and tissue engineering.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Dynamic Identification for a Manipulator Model based on Stribeck Friction using the Quasi-Newton Iterative Method

Dynamic Identification for a Manipulator Model based on Stri...

引用

IEEE International Conference on robotics and Biomimetics

作者： Feng Xiao Feilong Zhang Bing Han Hualiang Zhang School of Information Science and Engineering Shenyang University of Technology Shenyang China State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China Key Laboratory of Networked Control Systems Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Chinese Academy of Sciences Institutes for Robotics and Intelligent Manufacturing Shenyang China State Key Laboratory of Fluid Power and Mechatronic Systems School of Mechanical Engineering Zhejiang University Hangzhou China

The performance of dynamic control is intimately tied to modeling accuracy. However, traditional estimation methods and friction models, such as the least squares method and the Coulomb plus viscous model, fail to reflect the actual characteristics accurately. Particularly, the linear nature of the Coulomb plus viscous model overlooks the nonlinear static features of joint friction at slower velocities. To improve the rationality of the model structure, we integrate the Stribeck friction model into the Coulomb plus viscous model. However, introducing such nonlinearities compromises the applicability of the least squares method. As a countermeasure, we propose a new strategy that combines the least square method and the Quasi-Newton iterative method to identify the parameters of the modified nonlinear model. Additionally, the design of the excitation trajectory is critical to achieve high identification accuracy. We utilized the inverse of the smallest singular value of the observation matrix as the objective function. By minimizing it with the interior point method, we generate the excitation trajectory well-suited to stimulate dynamic characteristics. Then we leverage the discrepancies between the measured and estimated torques to assess the precision of the dynamic parameters of the manipulator. Remarkably, our proposed algorithm reduces the mean absolute error of the estimated torque by over 20.40%. Finally, an experiment of the industrial manipulator by hand guiding grab and drag is performed and shows that the proposed approach can provide the manipulator with comprehensive torque compensation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Path planning of mobile robot based on improved DDQN 2

Path planning of mobile robot based on improved DDQN

引用

2nd International Conference on Computer Vision and Data Mining, ICVDM 2021

作者： Yang, Yunxiao Wangjun Zhang, Hualiang Dai, Shilong School of Computer Science Shenyang University of Chemical Technology Shenyang110142 China Industrial Control Network and System Laboratory Shenyang Institute of Automation Chinese Academy of Sciences Shenyang110016 China Institudes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang110169 China

Aiming at the problem of overestimation and sparse rewards of deep Q network algorithm in mobile robot path planning in reinforcement learning, an improved algorithm HERDDQN is proposed. Through the deep convolutional neural network model, the original RGB image is used as input, and it is trained through an end-to-end method. The improved deep reinforcement learning algorithm and the deep Q network algorithm are simulated in the same two-dimensional environment. The experimental results show that the HERDDQN algorithm solves the problem of overestimation and sparse reward better than the DQN algorithm in terms of success rate and reward convergence speed, Which shows that the improved algorithm finds a better strategy than the DQN algorithm. © 2021 Institute of Physics Publishing. All rights reserved.

关键词： Mobile robots

来源：评论

学校读者我要写书评

暂无评论

Coordinated Guiding Vector Field Design for Ordering-Flexible Multi-Robot Surface Navigation

arXiv

引用

arXiv 2024年

作者： Hu, Bin-Bin Zhang, Hai-Tao Yao, Weijia Sun, Zhiyong Cao, Ming The School of Artificial Intelligence and Automation The Engineering Research Center of Autonomous Intelligent Unmanned Systems The Key Laboratory of Image Processing and Intelligent Control The State Key Lab of Digital Manufacturing Equipment and Technology Huazhong University of Science and Technology Wuhan430074 China The School of Robotics Hunan University Hunan410082 China The Institute of Engineering and Technology University of Groningen Groningen9747 AG Netherlands Department of Electrical Engineering Eindhoven University of Technology Netherlands

We design a distributed coordinated guiding vector field (CGVF) for a group of robots to achieve ordering-flexible motion coordination while maneuvering on a desired two-dimensional (2D) surface. The CGVF is characterized by three terms, i.e., a convergence term to drive the robots to converge to the desired surface, a propagation term to provide a traversing direction for maneuvering on the desired surface, and a coordinated term to achieve the surface motion coordination with an arbitrary ordering of the robotic group. By setting the surface parameters as additional virtual coordinates, the proposed approach eliminates potential singularity of the CGVF and enables both the global convergence to the desired surface and the maneuvering on the surface from all possible initial conditions. The ordering-flexible surface motion coordination is realized by each robot to share with its neighbors only two virtual coordinates, i.e. that of a given target and that of its own, which reduces the communication and computation cost in multi-robot surface navigation. Finally, the effectiveness of the CGVF is substantiated by extensive numerical simulations. Copyright © 2024, The Authors. All rights reserved.

关键词： Navigation

来源：评论

学校读者我要写书评

暂无评论

Impact of P-Cresol on Hydrogen Sulfide and Ammonia Treatment by Biotrickling Filter and the Production of Nitrous Oxide

SSRN

引用

SSRN 2024年

作者： Kong, Xianwang Ying, Shihao Cai, Zhen Du, Jianghui Chen, Dongzhi Liu, Dezhao Institute of Agricultural Bio-Environmental Engineering College of Biosystems Engineering and Food Science Zhejiang University Hangzhou310058 China Zhejiang Key Laboratory of Petrochemical Environmental Pollution Control School of Petrochemical Engineering & Environment Zhejiang Ocean University Zhoushan316004 China Key Laboratory of Equipment and Informatization in Environment Controlled Agriculture from Ministry of Agriculture and Rural Affairs of China Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province Hangzhou310058 China

Biotrickling filter (BTF) is often used for purification of waste gas from swine houses, with vital information still needed regarding interaction effects among multiple gas pollutants removal and also the formation of byproducts especially nitrous oxide (N2O, a strong greenhouse gas) due to the relative high NH3 concentration level compared to other gases. In this study, gas removal and N2O production were compared between two BTFs, where the inlet gas of BTF-1 contained NH3 and H2S while p-cresol was additionally supplied to BTF-2. At concentrations between 6.9 and 35.6 ppmv, removal efficiencies of NH3 exceeded 95% for both BTFs. As alternative strategy, adding thiosulfate improved H2S removal, more so in BTF-1. Interestingly, presence of p-cresol to some extent promoted H2S removal possibly due to effect on pH value of circulating solution. Similar to NH3, removal efficiencies of p-cresol were higher than 95% at an average inlet concentration of 881.4 ppbv. Gas residence time, pH of circulating solution and inlet loading were identified as key factors affecting BTF performance, but the response of individual gas compound to these factors was not consistent. Overall, p-cresol enhanced N2O generation although the effects were not always significant. High-throughput sequencing results showed that Proteobacteria accounted for the largest proportion of relative abundance and BTF-2 had much richer microbial diversity compared to BTF-1. Thermomonas, Comamonas, Rhodanobacter and other bacterial genus capable of denitrification were detected in both BTFs, and their corresponding abundances in BTF-2 (10.9%, 8.7% and 5.2%) were all greater than those in BTF-1 (0.4%, 0.3% and 2.0%), indicating that more denitrification may occur within BTF-2 and higher N2O could have been generated. This study provided evidence that organic gas components, served as carbon source, may increase the N2O production from BTF when treating waste gases containing NH3. © 2024, The Authors. All rig

关键词： Denitrification

来源：评论

学校读者我要写书评

暂无评论

A Two-Stage Hybrid Beamforming Design for Full-Duplex mmWave Communications

A Two-Stage Hybrid Beamforming Design for Full-Duplex mmWave...

引用

International Wireless Communications and Mobile Computing Conference, IWCMC

作者： Gengshan Wang Zhijia Yang Tierui Gong State Key Laboratory of Robotics Shenyang Institute of Automation Chinese Academy of Sciences Shenyang China Key Laboratory of Networked Control Systems Chinese Academy of Sciences Shenyang China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of Sciences Shenyang China University of Chinese Academy of Sciences Beijing China Singapore University of Technology and Design Singapore

In this paper, we investigate the hybrid beamforming design for the full-duplex (FD) millimeter-wave (mmWave) multiple-input multiple-output (MIMO) system, aiming to maximize the overall spectral efficiency (SE) and cancel the self-interference (SI) simultaneously. The coupling transmit power constraints, unit-modulus constraints, and strong SI make the problem under study highly nonconvex. To solve the complicated problem, we first transform it into an equivalent yet more tractable weighted minimum mean square error minimization problem and then propose an effective two-stage hybrid beam-forming design. In the first stage, we propose to extend the known matrix approximation method to the FD scenario to obtain the initial hybrid beamforming design. In the second stage, we propose to use the block coordinate descent method to update the digital beamformers and combiners while retaining the obtained analog solutions, which sufficiently exploits the easily adjustable property of digital solutions to cancel the residual SI and compensate for the SE loss. We further analyze the computational complexity of the proposed design. Numerical results demonstrate that our proposed two-stage hybrid beamforming design is superior to conventional related methods.

关键词： Wireless communication Radio frequency Array signal processing Spectral efficiency Full-duplex system Transforms Minimization

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：