检索结果-内蒙古大学图书馆

2009 10th European control Conference, ECC 2009

作者： Petrovic, Tamara Bogdan, Stjepan Sindicic, Ivica Laboratory for Robotics and Intelligent Control Systems Department of Control and Computer Engineering University of Zagreb Zagreb Croatia Exor D.o.o Bani 72 Zagreb10000 Croatia

ISBN: (纸本)9783952417393

As the first step in resolving stability of a manufacturing system in the sense of deadlock, calculation of circular waits might involve time and memory consuming calculations. In this paper we propose an efficient method for determination of circular waits in multiple-reentrant flowline class (MRF) of manufacturing systems. We introduce machine-job incidence (MJI) matrix that can be obtained from Steward sequencing matrix and Kusiak machine-part incidence matrix. The method uses index vector and MJI matrix in order to allocate circular wait auxiliary vector. Resources involved in the circular wait are directly computed from the auxiliary vector. Although efficiency of the proposed method has been demonstrated on examples involving single- and multi- part type manufacturing workcells, the method can be used for other discrete event systems as well, as long as the system under study belongs to MRF class. © 2009 EUCA.

关键词： Manufacture

来源：评论

学校读者我要写书评

暂无评论

control system for reactor vessel inspection manipulator

Control system for reactor vessel inspection manipulator

引用

IEEE Conference on control Technology and Applications (CCTA)

作者： Alan Mutka Ivica Draganjac Zdenko Kovacic Zeljko Postruzin Ranko Munk Faculty of EE&C Department of Control and Computer Engineering LARICS-Laboratory of Robotics and Intelligent Control Systems University of Zagreb Zagreb Croatia Organization of Technology Development and Application HRID Limited Zagreb Croatia

In this paper a system for control and 3D visualization of a manipulator for weld inspection of nuclear reactor vessels is described. Based on client-server TCP/IP software architecture, the presented control system enables an operator to perform the entire inspection procedure remotely over a network, avoiding exposure to dangerous radiation which is commonly present in nuclear reactor environments. The developed graphical user interface provides all necessary tools needed for planning robot scan trajectories, their verification on a virtual 3D model and execution on a remote robot. In addition, the weld inspection process can be observed in parallel on a virtual robot and reactor vessel model and on live video streams captured by two special cameras mounted on the robot.

关键词： control systems Inductors Inspection Welding Parallel robots Visualization TCPIP Software architecture Graphical user interfaces Trajectory

来源：评论

学校读者我要写书评

暂无评论

Matrix-Based Approach to Sequence analysis in Multiple Reentrant Flowlines

Matrix-Based Approach to Sequence analysis in Multiple Reent...

引用

2008 American control Conference (ACC), vol.3

作者： Tamara Petrovic Stjepan Bogdan LARICS-Laboratory for Advanced Robotics and Intelligent Control Systems Faculty of Electrical Engeneering and Computing University of Zagreb Croatia

This paper presents a method for extension of matrix model of manufacturing system in order to provide an efficient tool for analysis of systems with various dispatching sequences of shared resources. Proposed method is used for transformation of system matrices in linear max-plus model. Once the linear model is determined sequence feasibility can be checked. Furthermore, the method provides a straightforward procedure for production cycle calculation and resource utilisation. Efficiency of presented technique is demonstrated on a manufacturing system example at the end of the paper.

关键词： Manufacturing systems Dispatching Resource management Production Flexible manufacturing systems Algebra Laboratories intelligent robots intelligent control Computer aided manufacturing

来源：评论

学校读者我要写书评

暂无评论

Fuzzy logic navigation in multi agent systems

Fuzzy logic navigation in multi agent systems

引用

IEEE International Symposium on intelligent control (ISIC)

作者： S. Bogdan I. Rigo D. Miklic LARICS-Laboratory for Advanced Robotics and Intelligent Control Systems Faculty of EE&C University of Zagreb Croatia

ISBN: (纸本)9781424422241

In this paper we present a methodology for decision making in multi agent system comprised of agents driven by repulsive force and attracting force. Navigation functions are expressed as a set of fuzzy rules obtained by fuzzy Lyapunov stability criteria, thus ensuring stability of the overall system. The goal of the proposed methodology is to create desired formations by moving agents from their initial positions to formation targets, while in the same time avoiding collisions. The destination targets are dynamically permutated as long as the required formation is achieved.

关键词： intelligent control control systems USA Councils

来源：评论

学校读者我要写书评

暂无评论

Vibration-based terrain classification for electric powered wheelchairs

Vibration-based terrain classification for electric powered ...

引用

4th IASTED International Conference on Telehealth and Assistive Technologies, Telehealth/AT 2008

作者： Coyle, Eric Collins, Emmanuel G. DuPont, Edmond Dan, Ding Hongwu, Wang Cooper, Rory A. Grindle, Garrett Dept. of Mechanical Engineering at FAMU-FSU Center for Intelligent Systems Control and Robotics Tallahassee FL 32310 United States Dept. of Rehabilitation Science and Tech. Human Engineering Research Laboratory Univ. of Pittsburgh Pittsburgh PA 15261 United States

ISBN: (纸本)9780889867406

Automated terrain classification for electric powered wheelchairs (EPWs) has two primary motivations. First, certain terrains (e.g., sand and gravel) make wheelchair mobility more difficult. To alleviate this problem the wheelchair control system can be manually tuned for maximum speeds and/or accelerations to help adapt to various terrains. Terrain classification can then be used to automate the switch from one control mode to another. Second, terrain classification can help yield a better understanding of the surfaces traversed by various groups of wheelchair users. This can provide the data needed to develop wheelchairs geared to specific groups of users. This paper presents an algorithm for vibration-based terrain classification on EPWs. This algorithm has been shown to be highly accurate in offline analysis of experimental data. Future work will stress online implementation and algorithm improvements.

关键词： Wheelchairs

来源：评论

学校读者我要写书评

暂无评论

Graph Signature for Self-Reconfiguration Planning

Graph Signature for Self-Reconfiguration Planning

引用

2008 IEEE/RSJ International Conference on intelligent Robots and systems, Pages 526-1042

作者： Masoud Asadpour Alexander Sproewitz Aude Billard Pierre Dillenbourg Auke Jan Ijspeert ECE Dept. University of Tehran Control and Intelligent Processing Center of Excellence Iran Bio-Inspired Robotics Group (BIRG) Switzerland Learning Algorithms and Systems Laboratory (LASA) Switzerland Centre de Recherche et d Appui pour la Formation Switzerland Centre de Recherche et d'Appui pour la Formation (CRAFT) Ecole Polytechnique Fédérale de Lausanne (EPFL) Switzerland Bio-Inspired Robotics Group (BIRG)

ISBN: (纸本)9781424420575

This project incorporates modular robots as building blocks for furniture that moves and self-reconfigures. The reconfiguration is done using dynamic connection/disconnection of modules and rotations of the degrees of freedom. This paper introduces a new approach to self-reconfiguration planning for modular robots based on the graph signature and the graph edit-distance. The method has been tested in simulation on two type of modules: YaMoR and M-TRAN. The simulation results shows interesting features of the approach, namely rapidly finding a near-optimal solution.

关键词： Modular self-reconfigurable robots Adaptive furniture Graph isomorphism Graph signature Graph edit distance Modular robots graph editing Line graph Reconfiguration Furnishings signatures Building blocks Degree of freedom crop rotation

来源：评论

学校读者我要写书评

暂无评论

Fuzzy Arithmetic-based Stability Analysis and Design of Fuzzy controller

Fuzzy Arithmetic-based Stability Analysis and Design of Fuzz...

引用

IEEE International Conference on Automation Science and Engineering (CASE)

作者： S. Bogdan Z. Kovacic I. Fazinic I. Draganjac Laboratory for Advanced Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of Zagreb Zagreb Croatia

Initially introduced as a model-free control design method, in today practice fuzzy control is dominantly used as yet another nonlinear control technique based either on a linear or nonlinear model of a process. This paper addresses the stability assessment of a fuzzy logic control system based only on the partial knowledge of a controlled process. Lyapunov stability conditions are derived and analyzed by using fuzzy numbers and fuzzy arithmetic. The experimental results obtained for a non-stable second-order system confirmed that this approach could be successfully implemented. Some questions, addressed in the paper, remained open for further investigation.

关键词： Fuzzy control Stability analysis control systems Fuzzy systems Lyapunov method Sliding mode control Fuzzy logic Fuzzy sets Nonlinear control systems Arithmetic

来源：评论

学校读者我要写书评

暂无评论

LANDING AN UNMANNED AIR VEHICLE: VISION BASED MOTION ESTIMATION AND NONLINEAR control

引用

Asian Journal of control 2008年第3期1卷

作者： Omid Shakernia Yi Ma T. John Koo Shankar Sastry Dept. of Electrical Engineering & Computer Science University of California at Berkeley Berkeley CA94720-1774 U.S.A. Tak-Kuen John Koo received the B.Eng. degree in 1992 in Electronic Engineering and the M.Phil. in 1994 in Information Engineering both from the Chinese University of Hong Kong. From 1994 to 1995 he was a graduate student in Signal and Image Processing Institute at the University of Southern California. He is currently a Ph.D. Candidate in Electrical Engineering and Computer Sciences at the University of California at Berkeley. His research interests include nonlinear control theory hybrid systems inertial navigation systems with applications to unmanned aerial vehicles. He received the Distinguished M.Phil. Thesis Award of the Faculty of Engineering The Chinese University of Hong Kong in 1994. He was a consultant of SRI International in 1998. Currently he is the team leader of the Berkeley AeRobot Team and a delegate of The Graduate Assembly University of California at Berkeley. He is a student member of IEEE and SIAM. S. Shankar Sastry received his Ph.D. degree in 1981 from the University of California Berkeley. He was on the faculty of MIT from 1980-82 and Harvard University as a Gordon McKay professor in 1994. He is currently a Professor of Electrical Engineering and Computer Sciences and Bioengineering and Director of the Electronics Research Laboratory at Berkeley. He has held visiting appointments at the Australian National University Canberra the University of Rome Scuola Normale and University of Pisa the CNRS laboratory LAAS in Toulouse (poste rouge) and as a Vinton Hayes Visiting fellow at the Center for Intelligent Control Systems at MIT. His areas of research are nonlinear and adaptive control robotic telesurgery control of hybrid systems and biological motor control. He is a coauthor (with M. Bodson) of “Adaptive Control: Stability Convergence and Robustness Prentice Hall 1989.” and (with R. Murray and Z. Li) of “A Mathematical Introduction to Robotic Manipulati

In this paper, we use computer vision as a feedback sensor in a control loop for landing an unmanned air vehicle (UAV) on a landing pad. The vision problem we address here is then a special case of the classic ego-motion estimation problem since all feature points lie on a planar surface (the landing pad). We study together the discrete and differential versions of the ego-motion estimation, in order to obtain both position and velocity of the UAV relative to the landing pad. After briefly reviewing existing algorithm for the discrete case, we present, in a unified geometric framework, a new estimation scheme for solving the differential case. We further show how the obtained algorithms enable the vision sensor to be placed in the feedback loop as a state observer for landing control. These algorithms are linear, numerically robust, and computationally inexpensive hence suitable for real-time implementation. We present a thorough performance evaluation of the motion estimation algorithms under varying levels of image measurement noise, altitudes of the camera above the landing pad, and different camera motions relative to the landing pad. A landing controller is then designed for a full dynamic model of the UAV. Using geometric nonlinear control theory, the dynamics of the UAV are decoupled into an inner system and outer system. The proposed control scheme is then based on the differential flatness of the outer system. For the overall closed-loop system, conditions are provided under which exponential stability can be guaranteed. In the closed-loop system, the controller is tightly coupled with the vision based state estimation and the only auxiliary sensor are accelerometers for measuring acceleration of the UAV. Finally, we show through simulation results that the designed vision-in-the-loop controller generates stable landing maneuvers even for large levels of image measurement noise. Experiments on a real UAV will be presented in future work.

关键词： Motion estimation computer vision based control unmanned air vehicle differential flatness

来源：评论

学校读者我要写书评

暂无评论

Fuzzy controller Design Based on the Phase Plane Isoclines

Fuzzy Controller Design Based on the Phase Plane Isoclines

引用

Mediterranean Conference on control and Automation (MED)

作者： Stjepan Bogdan Zdenko Kovacic Larics-Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of Zagreb Zagreb Croatia

In this paper we describe a procedure that exploits geometric properties of state space in the investigation of the system stability. Although this method is cumbersome, its practical value becomes clear in the situation when state space is reduced to a phase plane, which is the case in a second-order system. Then phase plane analysis offers well known procedures (especially in case f(.) is linear) for the determination of the system stability. Simulation results, obtained by implementation of the proposed method on the fuzzy controller design, are given at the end of the paper

关键词： Fuzzy control Fuzzy systems control systems Sliding mode control Stability analysis Nonlinear control systems Fuzzy logic State-space methods Stability criteria Lyapunov method

来源：评论

学校读者我要写书评

暂无评论

Who Moved?! An Investigation into Distribution of Actions and Behaviors in a Multi Agent System

Who Moved?! An Investigation into Distribution of Actions an...

引用

International Conference on Mechatronics (ICM)

作者： Roozbeh Daneshvar Caro Lucas Artificial Intelligence and Robotics Laboratory Faculty of Electrical and Computer Engineering University of Tehran Tehran Iran Center of Excellence for Control and Intelligent Processing Faculty of Electrical and Computer Engineering School of Intelligent Systems IPM University of Tehran Tehran Iran

In this paper we have considered systems in which agents communicate via their environment. In these systems the agents do not have direct and explicit communication with each other and instead they have implicit communication which is performed via the environment they are located in. Different kinds of environment elements are considered to be changed while on the other hand for all of these situations there is a change in the environment and this change means potential stimuli that fires behaviors of agents for future. It is considered that if we can find a track of changes in the environment and find the roots of a movement in an agent that is originally made by another agent of the group

关键词： Artificial intelligence intelligent robots Fires Tracking Process control Communication system control control systems intelligent control Optical computing intelligent systems

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：