检索结果-内蒙古大学图书馆

IEEE/RSJ International Conference on Intelligent Robots and systems (IROS)

作者： Yixiang Liu Xiaolin Dai Kai Guo Jiang Wu Rui Song Jie Zhao Yibin Li School of Control Science and Engineering Shandong University Jinan China State Key Laboratory of Mechanical Transmissions Chongqing University Chongqing China Zhejiang Key Laboratory of Intelligent Operation and Maintenance Robot Hangzhou Shenhao Technology Co. Ltd Hangzhou China Engineering Research Center of Intelligent Unmanned System of Ministry of Education School of Control Science and Engineering Shandong University Jinan China School of Mechanical Engineering Shandong University Jinan China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin China

Existing in-pipe robots have insufficient adaptability when dealing with accidents in unfamiliar pipe environments. Developing a pipe robot that can be designed and manufactured quickly is one solution. The tensegrity structure is a self-stressing spatial structure formed by the interaction of rigid members and flexible cables, which has the advantages of simple structure, good flexibility, deformability, and impact resistance. Inspired by this structure, we design a novel worm-like tensegrity robot for different pipe environments, which can be manufactured rapidly at low cost. Firstly, a robotic module based on the tensegrity structure is designed inspired by the motion patterns of worm-like organisms. Then, the design process of the module is presented based on the mathematical analysis of the deformation. Finally, a prototype of the tensegrity robot is developed using simple and low-cost parts in less than an hour. To test the motion performance, load performance, and inspection capability of the tensegrity robot, we designed a series of experiments on horizontal pipes, vertical pipes, elbows, and steel pipes. Experimental results show that the worm-like tensegrity robot is simple in structure, easy to manufacture, low in cost, and good in performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

An Acoustic Activated Nozzle for Microdroplet Generation and Dispensing

SSRN

引用

SSRN 2023年

作者： Yin, Qiu Li, Xiuyuan Ma, Zhichao Zhang, Wenming State Key Laboratory of Mechanical System and Vibration Shanghai Jiao Tong University Shanghai200240 China Institute of Medical Robotics School of Biomedical Engineering Shanghai Jiao Tong University No.800 Dongchuan Road Shanghai200240 China

Droplet-based microfluidic has emerged as a versatile tool for widespread applications such as biochemical analysis and synthesis, for which the generation and manipulation of the microdroplets are the fundamental. Acoustic based droplet control has shown its advantages of good biocompatibility and widescale tunability. Here, we demonstrate an acoustic controlled nozzle that is integrated with both generation and directed dispensing of microdroplets. The system can generate monodisperse microdroplets with tunable sizes (50 μm – 641 μm) at a highest throughput of 2000 droplets per second. Besides, by tuning the acoustic frequency, the droplets can be steered to different directions after their formation, realizing on-demand dispensing of the microdroplets. The controlled microdroplet generation and dispensing are both attributed to the acoustic streaming effect induced by the nozzle vibration. Two basic mechanisms for the droplet control were studied: (1) the correlation between the droplet size and the acoustic actuation time, (2) the dependence of the droplet dispensing direction on the acoustic frequency. This work paves the way towards programmable control over acoustic generation and dispensing of microdroplets, which has great potential in the applications of bio-chemical analysis and synthesis. © 2023, The Authors. All rights reserved.

关键词： Biocompatibility

来源：评论

学校读者我要写书评

暂无评论

Mechanism Design and Motion Analysis of Heavy⁃Load Transfer Robot with Parallel Four⁃Bar Mechanism

引用

Transactions of Nanjing University of Aeronautics and Astronautics 2022年第5期39卷 606-618页

作者： ZHANG Jing WANG Dongbao WU Guangping GUO Hongwei LIU Rongqiang College of Mechanical and Vehicle Engineering Taiyuan University of TechnologyTaiyuan 030024P.R.China School of Electronic Information and Electrical Engineering Shanghai Jiao Tong UniversityShanghai 200240P.R.China State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001P.R.China

Heavy-load transfer robots are widely used in automobile production and machinery manufacturing to improve production *** order to meet the needs of large billet transfer,a 4-DOF transfer robot is designed in this paper,which consists of parallel four-bar *** Jacobian matrix referring to the mapping matrix from the joint velocity to the operating space velocity of the transfer robot can be solved by the differential-vector *** mean value of the Jacobian matrix condition number in the workspace is used as the global performance index of the robot velocity and the optimization *** constraint condition is established based on the actual working *** the linkage length optimization is carried out to decrease the length of the linkage and to increase the global performance index of *** total length of robot rods is reduced by 6.12%.The global performance index of velocity is improved by 45.15%.Taking the optimized rod length as the mechanism parameter,the distribution of the motion space of the transfer robot is ***,the results show that the proposed method for establishing the Jacobian matrix of the lower-mobility robot and for the optimization of the rods based on the velocity global performance index is accurate and *** workspace distribution of the robot meets the design requirements.

关键词： parameter optimization motion analysis mechanism design transfer robot heavy-load

来源：评论

学校读者我要写书评

暂无评论

Carrying the uncarriable: a deformation-agnostic and human-cooperative framework for unwieldy objects using multiple robots

arXiv

引用

arXiv 2022年

作者： Sirintuna, Doganay Ozdamar, Idil Ajoudani, Arash Human-Robot Interfaces and Interaction Laboratory Istituto Italiano di Tecnologia Genoa Italy Dept. of Informatics Bioengineering Robotics and System Engineering University of Genoa Genoa Italy

— This manuscript introduces an object deformability-agnostic framework for co-carrying tasks that are shared between a person and multiple robots. Our approach allows the full control of the co-carrying trajectories by the person while sharing the load with multiple robots depending on the size and the weight of the object. This is achieved by merging the haptic information transferred through the object and the human motion information obtained from a motion capture system. One important advantage of the framework is that no strict internal communication is required between the robots, regardless of the object size and deformation characteristics. We validate the framework with two challenging real-world scenarios: co-transportation of a wooden rigid closet and a bulky box on top of forklift moving straps, with the latter characterizing deformable objects. In order to evaluate the generalizability of the proposed framework, a heterogenous team of two mobile manipulators that consist of an Omni-directional mobile base and a collaborative robotic arm with different DoFs is chosen for the experiments. The qualitative comparison between our controller and the baseline controller (i.e., an admittance controller) during these experiments demonstrated the effectiveness of the proposed framework especially when co-carrying deformable objects. Furthermore, we believe that the performance of our framework during the experiment with the lifting straps offers a promising solution for the co-transportation of bulky and ungraspable objects. Copyright © 2022, The Authors. All rights reserved.

关键词： Controllers

来源：评论

学校读者我要写书评

暂无评论

Material Removal Mechanism and Microstructure Fabrication in Micro-Milling of Glow Discharge Polymer (GDP)

SSRN

引用

SSRN 2022年

作者： Wang, Guangzhou Yu, Tianyu Zhou, Xingying Guo, Ruiyang Chen, Mingjun Sun, Yazhou School of Mechatronics Engineering Harbin Institute of Technology Heilongjiang Harbin150001 China State Key Laboratory of Robotics and System Harbin Institute of Technology Heilongjiang Harbin150001 China

Glow discharge polymer (GDP) is an essential material for target ball applied in inertial confinement fusion (ICF). The processing quality of GDP material directly affects its high energy performance. Machinability and material removal mechanism are critical to attain a high processing quality during micro cutting. In this work, a comprehensive study of the machinability and removal mechanism of GDP material is conducted. Mechanical properties of GDP, such as elastic modulus, hardness and elastic recovery rate, were investigated first using nanoindentation experiments. Micro milling experiments were performed using micro ball end milling. Chip modes, machined surface morphology and their formation mechanism are emphatically analyzed. An geometric model for calculating undeformed chip area removed by ball end mill was proposed for analyzing the specific cutting force. Additionally, the effects of minimum uncut chip thickness (MUCT) threshold and size effect on the machining quality of GDP material were also studied. By comprehensively analyzing chip morphology, cutting force, specific cutting force as well as surface integrity, the cutting mechanism of GDP material can be roughly divided into the ploughing dominated, the ploughing-shearing coexist and the shearing dominated Below normalized MUCT threshold of 0.339, the size effect is obvious. When the ratio of feed per tooth to cutting edge radius is up to 0.714, the size effect has little influence on the machining of GDP material. At the end, micro dimples were fabricated on the GDP surface by ball end milling. The surface quality of machined micro dimples indicates that the ploughing effect and size effect have significant impact on machining micro-dimpled structures in ploughing dominated mode. The parameters (e.g. step or pitch distance) of specific machining ways (e.g. layer milling or spiral milling) are the main factors affecting machining micro dimples in shearing dominated mode. © 2022, The Authors. All rig

关键词： Surface morphology

来源：评论

学校读者我要写书评

暂无评论

Moobot: a miniature origami omnidirectional jumping robot with high trajectory accuracy

TechRxiv

引用

TechRxiv 2022年

作者： Tang, Lingqi Li, Yao Li, Bing School of Mechanical Engineering and Automation Harbin Institute of Technology Shenzhen Shenzhen518055 China State Key Laboratory of Robotics and System Harbin Institute of Technology Harbin150001 China

The jumping trajectory control is important for the jumping robots to overcome different obstacles. However, the trajectory control of a micro jumping robot is not easy. No insect-scale jumping robots have demonstrated the precise trajectory following yet. We proposed a miniature origami omnidirectional jumping robot (Moobot) that achieved the feedback control of jumping trajectory. The jumping of the robot is based on a four-bar origami structure and the SMA actuators. Unlike the tethered micro robots that powered externally, we integrated a miniature control board with LiPo battery on the robot for remote control. The overall system measured 6 g in mass, 5.5 cm in length and 2cm in height. Two strain gauges and an IMU sensor were used on the robot for the feedback control of the jumping force and take-off angle, respectively. Meanwhile, a reliable jumping mechanism and a novel supporting leg were designed to improve the jumping stability and trajectory accuracy. The standard deviation of the jumping distances was less than 1.4 cm, which is greatly improved from all previous micro jumping robots. Furthermore, we integrated the yaw control and conducted the omnidirectional jumping experiments. The results revealed that Moobot could climb different platforms from all directions precisely. © 2022, CC BY.

关键词： Feedback control

来源：评论

学校读者我要写书评

暂无评论

A Novel Non-cooperative Target Capture Tool for Defunct Satellite 17

A Novel Non-cooperative Target Capture Tool for Defunct Sate...

引用

17th IEEE International Conference on Mechatronics and Automation, ICMA 2020

作者： Sun, Yongjun Liu, Yiwei Jin, Minghe Liu, Rongqiang Liu, Hong Harbin Institute of Technology School of Mechatronics Engineering State Key Laboratory of Robotics and System Harbin Heilongjiang Province China

ISBN: (数字)9781728164168

ISBN: (纸本)9781728164151

With the increase of defunct satellites, the orbit resource of the Earth is becoming more and more shortage. As one of the key technologies, the capture of non-cooperative targets has become a research hotspot. Due to its obvious characteristics, easy identification, high strength and high stiffness, the Launch Adapter Ring (LAR) has become a capture object on the defective and tumbling satellite. In this paper, a novel LAR capture tool is developed, and the LAR capture tool is designed, manufactured and tested. In order to improve the probability of grasp, the direct drive was adopted. The main research contents are as follows: overall design of the capture tool, design of electromagnetic brake, analysis of kinematics, and test the prototype. © 2020 IEEE.

关键词： Orbits

来源：评论

学校读者我要写书评

暂无评论

A Path Planning Algorithm of Spray Robot based on 3D Point Cloud

A Path Planning Algorithm of Spray Robot based on 3D Point C...

引用

2020 International Conference on Communications, Information system and Computer engineering, CISCE 2020

作者： Yang, Jubo Kong, Minxiu Wang, Rundong School of Mechatronics Engineering Harbin Institute of Technology Harbin China State Key Laboratory of Robotics and System Harbin China

ISBN: (纸本)9781728197616

The automatic path planning method of spray robot has always been a challenging problem, especially for the mixed-line production of various workpieces. This paper discusses the self-acquisition technology of spray path based on the point cloud model of furniture. The coordinate relationship between the coordinate system of the spraying system and the adaptive adjustment of the pose are discussed for the point cloud pose of the furniture. The furniture surface path planning based on point cloud slices and edge spraying based on edge extraction technology were studied to obtain the ordered path point sequence and posture of the spray gun. Through the robot spraying experiment on flat furniture and complex curved furniture, the reliability of the algorithm is verified from the aspects of algorithm efficiency and spraying effect. © 2020 IEEE.

关键词： Motion planning

来源：评论

学校读者我要写书评

暂无评论

Direction-of-Arrival and Range Estimation of Near-Field Sources Based on Subspace Fitting

Direction-of-Arrival and Range Estimation of Near-Field Sour...

引用

2021 China Automation Congress, CAC 2021

作者： Tong, Yingnan Zuo, Weiliang Xin, Jingmin Zheng, Nanning Sano, Akira Institute of Artificial Intelligence and Robotics Xi'an Jiaotong University Xi'an710049 China National Engineering Laboratory for Visual Information Processing and Applications Xi'an Jiaotong University Xi'an710049 China Department of System Design Engineering Keio University Yokohama223-8522 Japan

ISBN: (纸本)9781665426473

A new algorithm is proposed to address the problem of near-field source localization using weighted subspace fitting (WSF) in this paper. Through separating the two parameters of bearings and ranges, the two-dimensional parameter estimation problem is first transformed into one-dimensional parameter estimation problem. The specific method is to construct a Toeplitz-like correlation matrix by using the anti-diagonal elements of the near-field source signal covariance matrix. Then the subspace fitting algorithm of sparse recovery is used to estimate the direction of arrival (DOA). The estimated direction is substituted back to the original near-field source model. After that, the sparse recovery algorithm based on singular value decomposition can be used to calculate the estimated value of the ranges. Computer simulations verify the excellent performance of the algorithm. In addition, the algorithm has lower requirements for SNR and snapshots. © 2021 IEEE

关键词： Singular value decomposition

来源：评论

学校读者我要写书评

暂无评论

Stability Analysis and Performance Evaluation of Delayed Bilateral Telerobotic systems over a Lossy Communication Channel

引用

Journal of systems Science & Complexity 2021年第1期34卷 157-179页

作者： BAKHSHI Ali ALFI Alireza TALEBI Heidar Ali SOURATGAR Amir Aboulfazl YOUSEFI Mahdi Faculty of Electrical and Robotic Engineering Shahrood University of TechnologyShahrood 36199-95161Iran Power Plants Control Systems Technology Development Plan Department of monitoring and ControlNiroo Research InstituteTehran 14665-517Iran Real-Time and Robotics system Laboratory Faculty of Electrical EngineeringAmirkabir University of TechnologyHafez AvenueTehran 15914Iran Electrical and Computer Engineering Department The University of British Columbia2385East MallVan couverBC V6T 1Z4Canada

The focus of this paper is to address a novel control technique for stability and transparency analysis of bilateral telerobotic systems in the presence of data loss and time delay in the communication channel. Different control strategies have been reported to compensate the effects of time delay in the communication channel;however, most of them result in poor performance under data loss. First, a model for data loss is proposed using a finite series representation of a set of periodic continuous *** improve the performance and data reconstruction, a holder circuits is also introduced. The passivity of the overall system is provided via the wave variable technique based on the proposed model for the data loss. The stability analysis of the system is then derived using the Lyapunov theorem under the time delay and the data loss. Finally, experimental results are given to illustrate the capability of the proposed control technique.

关键词： Lossy channel passivity stability telerobotic transparency

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：