检索结果-内蒙古大学图书馆

Hybrid Robotic Arm for Autonomous Aerial Refueling

Chinese Journal of Mechanical engineering 2024年第6期37卷 429-440页

作者： Kaixuan Li Gangfeng Liu Yongsheng Gao Jie Zhao State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150080China School of Mechatronics Engineering Harbin 150080China

Autonomous aerial refueling technology is gaining increasing attention to enhance aircraft combat *** research on autonomous refueling focuses mainly on flight control laws,with little attention to the automation of refueling *** leads to high demands on control law performance and navigation accuracy,making it difficult to ensure *** address this,we propose a robotic arm system capable of automatic docking during the flexible aerial refueling *** system uses a conical kinematic space configuration,offering enhanced stability and impact *** frame-type structure achieves a lightweight ***,we establish a single-objective optimization model for the connecting rod dimensions and apply a genetic algorithm(GA)for their *** also propose a trajectory-fitting calibration theory based on the robotic arm's special configuration and complete its movement accuracy calibration using a laser *** calibration method reduces the robotic arm's motion error by 71%,achieving an absolute positioning accuracy better than 3.5 mm,which meets the requirements for autonomous aerial *** summary,this research presents a hybrid robotic arm that meets automatic docking requirements,offering a new approach to autonomous aerial refueling.

关键词： Autonomous aerial refueling Conical kinematic space configuration Optimization of structural design Calibration method

来源：评论

学校读者我要写书评

暂无评论

Watt Linkage–Based Legged Deployable Landing Mechanism for Reusable Launch Vehicle: Principle, Prototype Design, and Experimental Validation

引用

engineering 2023年第1期20卷 120-133页

作者： Haitao Yu Baolin Tian Zhen Yan Haibo Gao Hongjian Zhang Huiqiang Wu Yingchao Wang Yuhong Shi Zongquan Deng State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150080China Beijing Institute of Aerospace Systems Engineering Beijing 100076China

The reusable launch vehicle (RLV) presents a new avenue for reducing cost of space transportation. The landing mechanism, which provides landing support and impact absorption, is a vital component of the RLV at final stage of recovery. This study proposes a novel legged deployable landing mechanism (LDLM) for RLV. The Watt-II six-bar mechanism is adopted to obtain the preferred configuration via the application of the linkage variation approach. To endow the proposed LDLM with advantages of large landing support region, lightweight, and reasonable linkage internal forces, a multi-objective optimization paradigm is developed. Furthermore, the optimal scale parameters for guiding the LDLM prototype design is obtained numerically using the non-dominated sorting genetic algorithm-II (NSGA-II) evolutionary algorithm. A fully-functional scaled RLV prototype is developed by integrating the gravity-governed deploying scheme to facilitate unfolding action to avoid full-range actuation, a dual-backup locking mechanism to enhance reliability of structure stiffening as fully deployed, and a shock absorber (SA) with multistage honeycomb to offer reliable shock absorbing performance. The experimental results demonstrate that the proposed LDLM is capable of providing rapid and smooth deployment (duration less than 1.5 s) with mild posture disturbance to the cabin (yaw and pitch fluctuations less than 6°). In addition, it provides satisfactory impact attenuation (acceleration peak less than 10g (g is the gravitational acceleration)) in the 0.2 m freefall test, which makes the proposed LDLM a potential alternative for developing future RLV archetype.

关键词： Reusable launch vehicle(RLV) Deployable mechanism Optimization desi gn

来源：评论

学校读者我要写书评

暂无评论

Towards understanding the surface rippling process by periodic reciprocal nanoscratching

引用

Friction 2023年第10期11卷 1815-1828页

作者： Zihan LI Yongda YAN Jiqiang WANG Chen LI Yanquan GENG State Key Laboratory of Robotics and Systems Robotics InstituteHarbin Institute of TechnologyHarbin 150080China Center for Precision Engineering Harbin Institute of TechnologyHarbin 150001China

The bundle structure formed perpendicular to the scratching direction is a type of wear-induced structure for *** this study,the formation mechanism of bundle structures on polycarbonate(PC)surfaces is investigated by reciprocal scratching *** on the analysis of the morphologies,friction forces,and height signals,the formation of the bundle structure is *** influence of scratching parameters,including the feed value and scratching direction,on the formation of the bundle structure is also *** is found that the bundle structure is accumulated by the continuous stacking of the sample materials plowed by the tip in stick–slip motion,and that the stick–slip behavior is enhanced with increased scratching *** work reproduces the formation process of bundle structure in experiments for the first time and demonstrates that the stick–slip enhancement mechanism exists in the reciprocal scratching process,providing further insight into the friction behavior of polymers.

关键词： atomic force microscopy(AFM) bundle structures stick-slip friction force

来源：评论

学校读者我要写书评

暂无评论

Understanding the Machining Process of Hierarchical Micro/Nanograting Structures Used for Optical Variable Device

引用

Chinese Journal of Mechanical engineering 2025年第1期38卷 161-185页

作者： Yanquan Geng Wenhan Zhu Xiaosong Zhang Aoxiang Zhang Yongda Yan Hailong Cui Bo Xue Jiqiang Wang TState Key Laboratory of Robotics and Systems Robotics InstituteHarbin Institute of TechnologyHarbin 150080China Sichuan Precision and Ultra-Precision Machining Engineering Technology Center Chengdu 610200China College of Mechanical and Electrical Engineering Northeast Forestry UniversityHarbin 150040China

Hierarchical micro/nanograting structures have attracted increasing attention owing to their significant applications in the fields of structural coloring,anti-counterfeiting,and ***,the fabrication of hierarchical micro/nanograting structures is important for these *** this study,a strategy for machining hierarchical micro/nanograting structures is developed by controlling the tool movement trajectory.A coupling Euler-Lagrange finite element model is established to simulate the machining *** effect of the machining methods on the nanograting formation is demonstrated,and a suitable machining method for reducing the cutting force is *** height of the nanograting decreases with an increase in the tool edge ***,optical variable devices(OVDs)are machined using an array overlap machining *** schemes for the parallel column unit crossover and column unit in the groove crossover are designed to achieve high-quality machining of *** coloring of the logo of the Harbin Institute of Technology and the logo of the centennial anniversary of the Harbin Institute of Technology on the surface of metal samples,such as aluminum alloys,is *** findings of this study provide a method for the fabrication of hierarchical micro/nanograting structures that can be used to prepare OVDs.

关键词： Hierarchical micro/nanograting structures Optical variable devices Finite element simulation Tool trajectory controlling

来源：评论

学校读者我要写书评

暂无评论

Leader-follower:Human-centered intention-guided controller for novel SuperLimb with application to load-carrying scenarios

引用

Science China(Technological Sciences) 2025年第1期68卷 321-334页

作者： Qinghua ZHANG Xianglong LI Hongwei JING Kerui SUN Yuancheng LI Sikai ZHAO Lele LI Haotian JU Ziqi WANG Rui WU Tianjiao ZHENG Jie ZHAO Yanhe ZHU The State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China The Learning Algorithms and Systems Laboratory School of EngineeringÉcole Polytechnique Fédérale de LausanneLausanne CH 101510587Switzerland

Supernumerary robotic arms(SuperLimb)are a new type of wearable robot that works closely with humans as a third hand to augment human operation *** conveyance of wearers'intentions,allocation of roles,and humancentered interaction considerations are the key points in the process of human-SuperLimb *** paper proposes a human-centered intention-guided leader-follower controller that relies on the dynamic modeling of SuperLimb with application to load-carrying *** proposed leader-follower controller takes the human as the leader and the SuperLimb as the follower,achieving effective information communication,autonomous coordination,and good force compliance between SuperLimb,humans,and the environment under human safety ***,the human-SuperLimb dynamic system is modeled to achieve force interaction with the environment and ***,to achieve the precise intention extraction of humans,pose data from five visual odometry sensors are fused to capture the human state,the generalized position,the velocity of hands,and the surface electromyography signals from two myoelectric bracelets sensors are processed to recognize the natural hand gestures during load-carrying scenarios by a designed Swin transformer ***,based on the real-time distance detection between human and mechanical limbs,the security assurance and force-compliant interaction of the human-SuperLimb system are ***,the human hand muscle intention recognition,human-robot safety strategy verification,and comparative load-carrying experiments with and without the proposed method are conducted on the SuperLimb *** showed that the task parameters are well estimated to produce more reasonable planning trajectories,and SuperLimb could well understand the wearer's intentions to switch different SuperLimb *** proposed sensor-based human-robot communication framework motivates future studies of other collaboration scenes fo

关键词： SuperLimb leader-follower human intention estimation human-robot safety human-robot communication

来源：评论

学校读者我要写书评

暂无评论

Position-aware pushing and grasping synergy with deep reinforcement learning in clutter

引用

CAAI Transactions on Intelligence Technology 2024年第3期9卷 738-755页

作者： Min Zhao Guoyu Zuo Shuangyue Yu Daoxiong Gong Zihao Wang Ouattara Sie Intelligent Robotics Laboratory Faculty of Information TechnologyBeijing University of TechnologyBeijingChina Beijing Key Laboratory of Computational Intelligence and Intelligent Systems BeijingChina Laboratory of Biomechatronics and Intelligent Robotics(BIRO) Department of Mechanical and Aerospace EngineeringNorth Carolina State UniversityRaleighNorth CarolinaUSA

The positional information of objects is crucial to enable robots to perform grasping and pushing manipulations in *** effectively perform grasping and pushing manipu-lations,robots need to perceive the position information of objects,including the co-ordinates and spatial relationship between objects(e.g.,proximity,adjacency).The authors propose an end-to-end position-aware deep Q-learning framework to achieve efficient collaborative pushing and grasping in ***,a pair of conjugate pushing and grasping attention modules are proposed to capture the position information of objects and generate high-quality affordance maps of operating positions with features of pushing and grasping *** addition,the authors propose an object isolation metric and clutter metric based on instance segmentation to measure the spatial re-lationships between objects in cluttered *** further enhance the perception capacity of position information of the objects,the authors associate the change in the object isolation metric and clutter metric in cluttered environment before and after performing the action with reward function.A series of experiments are carried out in simulation and real-world which indicate that the method improves sample efficiency,task completion rate,grasping success rate and action efficiency compared to state-of-the-art end-to-end *** that the authors’system can be robustly applied to real-world use and extended to novel *** material is available at https://***/NhG\_k5v3NnM}{https://***/NhG\_k5v3NnM.

关键词： deep learning deep neural networks intelligent robots

来源：评论

学校读者我要写书评

暂无评论

Light-driven high-precision cell adhesion kinetics

引用

Light(Science & Applications) 2022年第10期11卷 2256-2257页

作者： Zhiyuan Zhang Daniel Ahmed Acoustic Robotics Systems Laboratory Institute of Robotics and Intelligent SystemsDepartment of Mechanical and Process EngineeringETH ZurichS?umerstrasse 4CH-8803 ZurichSwitzerland

Existing single-cell adhesion kinetics methods are performed under conditions highly unlike the physiological cell adhesion ***,researchers have developed a new optical technique for high-precision measurement of cell... 详细信息

关键词： conditions. kinetics formed

来源：评论

学校读者我要写书评

暂无评论

Bifunctional nanoprobe for simultaneous detection of intracellular reactive oxygen species and temperature in single cells

引用

Microsystems & Nanoengineering 2024年第6期10卷 161-172页

作者： Yanmei Ma Weikang Hu Jian Hu Muyang Ruan Jie Hu Ming Yang Yi Zhang Hanhan Xie Chengzhi Hu Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems Department of Mechanical and Energy EngineeringSouthern University of Science and TechnologyShenzhen 518000China Department of Electrical and Electronic Engineering Southern University of Science and TechnologyShenzhen 518000China

Living cells can rapidly adjust their metabolic activities in response to external stimuli,leading to fluctuations in intracellular temperature and reactive oxygen species(ROS)*** these parameters is essential for understanding cellular metabolism,particularly during dynamic biological *** this study,we present a bifunctional nanoprobe capable of simultaneous measurement of ROS levels and temperature within single *** nanoprobe features two individually addressable nanoelectrodes,with platinum(Pt)and nickel(Ni)coatings on both *** the tip,these two metal layers form a nano-thermocouple,enabling precise intracellular temperature measurements,while the Pt layer facilitates selective ROS *** dual functionality allows for real-time monitoring of cellular responses during synergistic chemo-photothermal therapy of cancer cells and zebrafish embryos subjected to mitochondrial toxic *** results demonstrate that the nanoprobe effectively measures increases in temperature and ROS levels in HeLa cells undergoing chemo-photothermal therapy,as well as in chemically stimulated zebrafish *** providing detailed analysis of submicrometer-scale temperature and ROS variations within living cells,this nanoprobe offers valuable insights into cellular processes and holds promise for early disease detection and drug development.

关键词： metabolism simultaneous holds

来源：评论

学校读者我要写书评

暂无评论

Dynamic compliance of energy-saving legged elastic parallel joints for quadruped robots:design and realization

引用

Frontiers of Mechanical engineering 2024年第2期19卷 45-58页

作者： Yaguang ZHU Minghuan ZHANG Xiaoyu ZHANG Haipeng QIN Key Laboratory of Road Construction Technology and Equipment of Ministry of Education School of Engineering MachineryChang’an UniversityXi’an 710064China State Key Laboratory of Robotics and Systems Harbin Institute of TechnologyHarbin 150001China

Achieving dynamic compliance for energy-efficient legged robot motion is a longstanding *** recent predictive control methods based on single-rigid-body models can generate dynamic motion,they all assume infinite energy,making them unsuitable for prolonged robot *** this issue necessitates a mechanical structure with energy storage and a dynamic control strategy that incorporates feedback to ensure *** work draws inspiration from the efficiency of bio-inspired muscle–tendon networks and proposes a controllable torsion spring leg *** design integrates a spring-loaded inverted pendulum model and adopts feedback delays and yield springs to enhance the delay effects.A leg control model that incorporates motor loads is developed to validate the response and dynamic performance of a leg with elastic *** model provides torque to the knee joint,effectively reducing the robot’s energy consumption through active or passive control *** benefits of the proposed approach in agile maneuvering of quadruped robot legs in a realistic scenario are demonstrated to validate the dynamic motion performance of the leg with elastic joints with the advantage of energy-efficient legs.

关键词： dynamic responsiveness energy dissipation legged locomotion parallel joints quadruped robot

来源：评论

学校读者我要写书评

暂无评论

Design of a Remote Controlled Puppet Robot Imitating a Manual Driven Puppet Using Deep Learning Pose Detection 12

Design of a Remote Controlled Puppet Robot Imitating a Manua...

引用

12th RSI International Conference on robotics and Mechatronics, ICRoM 2024

作者： Hamzeh, Hamed Shahroozi, Kiarash Nabipour, Ahmad Kazemi, Parham Malek-Zahedi, Mohammad Hallajian, Mehdi Moradia, Hadi School of Electrical and Computer Engineering College of Engineering University of Tehran Advanced Robotics and Intelligent Systems Laboratory Iran

ISBN: (纸本)9798331529734

Traditional puppet manipulation systems often require human operators to be physically present in tight and cramped locations. This leads to challenges in the positioning and effective operation of puppets, particularly in the presence of children in educational settings. In this paper, we present the design, development, and integration of a cost-effective robotic system for remotely manipulating puppets in real-time. Additionally, the system integrates a YOLOv8 Pose Detection model, trained on a custom dataset with an accuracy of 91.4%, enabling real-time gesture recognition and allowing the robot to be controlled by imitating the motions of a manually operated puppet. The system demonstrates the potential for many applications, including interactive entertainment, teleoperation, and education. © 2024 IEEE.

关键词： Gesture recognition

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：