检索结果-内蒙古大学图书馆

19th IEEE International Conference on Automation Science and Engineering, CASE 2023

作者： Martinovic, Dean Orsag, Matko University of Zagreb Faculty of Electrical Engineering and Computing Laboratory for Robotics and Intelligent Control Systems Zagreb10000 Croatia

ISBN: (纸本)9798350320695

This paper focuses on bridge inspections performed by intelligent unmanned aerial vehicles (UAV). For this, small data loggers are placed by the UAVs at the bridge, which have to be removed later. In our previous work we presented the magnetic localization method SRIOD, which not only detects the center of the data logger but also its orientation. In this work we proof SRIOD in a real application and let a robotic arm locate a magnetic target. The hardware involved is presented including the control strategy for the robot. The motions of the robot and the magnetic target are captured with 12 Optitrack cameras in order to validate the localization quality. © 2023 IEEE.

关键词： Antennas

来源：评论

学校读者我要写书评

暂无评论

An Indoor Positioning Algorithm Against NLOS Error Based on UWB 41

An Indoor Positioning Algorithm Against NLOS Error Based on ...

引用

第41届中国控制会议

作者： Mingxiang Liao Yongbo Li Guangyao Wang Zhenyu Lei Zihao Zhang School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems System Integration and Industrial Robotics Laboratory

ISBN: (数字)9789887581536

ISBN: (纸本)9781665482561

Ultra-wideband（UWB） positioning technology has absolute advantages due to its centimeter-level accurate positioning ***,the positioning accuracy is greatly reduced because of the inability to completely solve the error caused by non-line-of-sight（NLOS） and multi-path *** present,the Chan-Taylor（C-T） combination algorithm proposed by scholars can achieve a good positioning effect in the line-of-sight（LOS） environment,but in the NLOS environment,positioning deviation of this algorithm is large .Aiming at the problem of low localization accuracy in NLOS environment,this paper presents a Chan-Taylor-Kalman（CTK） joint positioning algorithm based on UWB and adapted to NLOS *** basic idea of CTK joint positioning algorithm is to introduce weight coefficients on the basis of C-T combination algorithm to reduce the situation of non-convergence of positioning results;then combined with the improved Kalman filter to eliminate outliers and eliminate the influence of the non-line-of-sight *** show that under the same NLOS environment,the probability of the positioning error of the C-T combination positioning algorithm greater than 20 cm is about 60%,while the probability of the positioning error of the CTK joint positioning algorithm greater than 10 cm is only about 10%.

关键词： UWB NLOS indoor positioning Chan-Taylor combination algorithm Kalman filter

来源：评论

学校读者我要写书评

暂无评论

Kinematics analysis of lower limb rehabilitation robot based on D-H method 41

Kinematics analysis of lower limb rehabilitation robot based...

引用

第41届中国控制会议

作者： Kui Jie Wangyong He Renjie Gui School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems System Integration and Industrial Robotics Laboratory

ISBN: (数字)9789887581536

ISBN: (纸本)9781665482561

At present,rehabilitation robots usually work together with patients and train them to achieve therapeutic effects by assisting them to complete movement within a certain *** this paper,it analyzes the average length and proportion of Chinese human lower limbs,as well as the range of extreme motion and comfortable motion of each joint of human lower *** on the error transfer matrix of rigid body connecting rod,the three-DOF lower limb rehabilitation robot human lower limb static pose error model and human/machine integration model are *** D-H method was used to solve the kinematic function between the angle of each joint and the position of the end of human lower *** analysis of the kinematics of human lower limbs is to calculate its inverse kinematics *** the motion control of rehabilitation robots,the inverse kinematics is more important than the forward kinematics,which is the basis for rehabilitation robot to realize trajectory planning under the training mode of passive trajectory traction,as well as the basis for compliant ***,a simulation model is established with Matlab software,and the simulation results show the feasibility and safety of the rehabilitation training process.

关键词： Lower limb rehabilitation robot Range of motion Human kinematics

来源：评论

学校读者我要写书评

暂无评论

Quantitative analysis of the main components in ceramic raw materials based on the desktop LIBS analyzer

引用

Plasma Science and Technology 2022年第8期24卷 46-54页

作者： Peng ZHANG Lanxiang SUN Haibin YU Peng ZENG State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016People's Republic of China Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110016People's Republic of China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110016People's Republic of China

The concentrations of SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiO,and loss on ignition(L.O.I.) are the main inorganic components of geological *** of the eight oxides and *** also the main indicators of concern in the production of building *** analysis of the eight oxides and *** performed using fiber-laserbased laser-induced breakdown spectroscopy(LIBS).A combination of continuous background deduction,full width at half maximum(FWHM) intensity integral and spectral sum normalization was proposed for data *** the data processing combined the continuous background deduction,FWHM intensity integral and spectral sum normalization,the mean absolute errors(MAEs) of the calibration of L.O.I.,SiO,Al2O,KO,NaO,CaO,MgO,Fe2Oand TiOwas reduced from 2.03%,12.06%,4.84%,1.10%,0.69%,0.31%,0.11%,0.20%and 0.10% to 1.80%,9.48%,2.12%,0.36%,0.58%,0.11%,0.08%,0.19% and 0.05%,*** multivariate method was further introduced and discussed to improve the analysis *** MAEs of L.O.I.,SiO,Al2O,KO and NaO were further reduced to1.12%,2.07%,1.38%,0.35% and 0.43%,*** results show that the overall prediction error can meet the requirements for the production of building *** LIBS desktop analyzer has great potential in detection applications on geological samples.

关键词： laser-induced breakdown spectroscopy fiber laser quantitative analysis matrix effects geological samples

来源：评论

学校读者我要写书评

暂无评论

Short-term load forecasting of long-short term memory neural network based on genetic algorithm 4

Short-term load forecasting of long-short term memory neural...

引用

4th IEEE Conference on Energy Internet and Energy System Integration, EI2 2020

作者： Li, Wanting Zang, Chuanzhi Liu, Ding Zeng, Peng Shenyang Institute of Automation Chinese Academy of Sciences Key Laboratory of Networked Control Systems State Key Laboratory of Robotics Institutes for Robotics and Intelligent Manufacturing Beijing China

ISBN: (纸本)9781728196060

Accurate load forecasting is conducive to the reasonable arrangement of power grid dispatching plans. Traditional load forecasting methods cannot handle the time series and nonlinear characteristics of load well. Long-short term memory (LSTM) neural networks can record long-term and short-term information, which can effectively solve this kind of problem. But the parameters of LSTM network are difficult to determine. For this reason, this paper proposes a long-short term neural network based on genetic algorithm. The learning rate and iteration number of the LSTM network are used as chromosomes, and the genes are continuously selected, crossed, and mutated to obtain more good genes. Comparing this method with the standard LSTM network, the simulation results show that the LSTM network using genetic algorithm for parameter optimization improves the prediction accuracy of the standard LSTM network by 63%. © 2020 IEEE.

关键词： Genetic algorithms

来源：评论

学校读者我要写书评

暂无评论

Industrial Wireless control Networks:From WIA to the Future

引用

Engineering 2022年第1期8卷 18-24页

作者： Haibin Yu Peng Zeng Chi Xu State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of SciencesShenyang 110016China Key Laboratory of Networked Control Systems Chinese Academy of SciencesShenyang 110016China Institutes for Robotics and Intelligent Manufacturing Chinese Academy of SciencesShenyang 110169China

*** Industrial automation is undergoing a significant innovation as information,communication,and operation technologies are deeply integrating with each *** this trend,industrial wireless control networks(IWCNs)are becoming increasingly attractive to industrial automation since they can help speed up production efficiency,reduce cost,enhance safety,and finally realize intelligent manufacturing[1].

关键词： attractive integrating becoming

来源：评论

学校读者我要写书评

暂无评论

Matrix-Based Approach to Sequence analysis in Multiple Reentrant Flowlines

Matrix-Based Approach to Sequence analysis in Multiple Reent...

引用

2008 American control Conference (ACC), vol.3

作者： Tamara Petrovic Stjepan Bogdan LARICS-Laboratory for Advanced Robotics and Intelligent Control Systems Faculty of Electrical Engeneering and Computing University of Zagreb Croatia

This paper presents a method for extension of matrix model of manufacturing system in order to provide an efficient tool for analysis of systems with various dispatching sequences of shared resources. Proposed method is used for transformation of system matrices in linear max-plus model. Once the linear model is determined sequence feasibility can be checked. Furthermore, the method provides a straightforward procedure for production cycle calculation and resource utilisation. Efficiency of presented technique is demonstrated on a manufacturing system example at the end of the paper.

关键词： Manufacturing systems Dispatching Resource management Production Flexible manufacturing systems Algebra Laboratories intelligent robots intelligent control Computer aided manufacturing

来源：评论

学校读者我要写书评

暂无评论

control Aspects in Programming by Demonstation for Robotic Deep- Micro- Hole Drilling

Control Aspects in Programming by Demonstation for Robotic D...

引用

Mediterranean Conference on control and Automation (MED)

作者： Bruno Maric Frano Petric Matko Orsag LARICS Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of Zagreb Zagreb Croatia

ISBN: (数字)9798350395440

ISBN: (纸本)9798350395457

This paper explores control aspects in a collab-orative robotic system designed to replicate human operators' drilling skills in deep- micro- hole tasks, focusing on the glass-container mould industry. To replicate human performance, we develop a single-DOF Impedance-based drill controller for a standard industrial position-controlled robot, enhancing safe and smooth interactions between the drill bit and the mould. To address high feed rates observed in worker demonstrations and prevent bit breaks, we focus on minimizing non-axial motion during drilling on an off-the-shelf available industrial manipulator KUKA KR 10. This involves analyzing the impact of joint dynamics on drill motion and designing a control system for the robot's low-level control to achieve axial drill motion. We show that the proposed joint control system that takes into account relationship between joint and tool dynamics outperforms available robot low-level control in minimizing non-axial motion, leading to the robot being able to outperform the human in deep- micro- hole drilling.

关键词： Drilling Service robots Dynamics Robot control Time factors Synchronization Task analysis

来源：评论

学校读者我要写书评

暂无评论

Design and Validation of a Wireless Drone Docking Station

Design and Validation of a Wireless Drone Docking Station

引用

International Conference on Unmanned Aircraft systems (ICUAS)

作者： Dario Stuhne Goran Vasiljević Stjepan Bogdan Zdenko Kovačić LARICS Laboratory for Robotics and Intelligent Control Systems University of Zagreb Faculty of Electrical Engineering and Computing Zagreb Croatia

Drones are increasingly operating autonomously, and the need for extending drone power autonomy is rapidly increasing. One of the most promising solutions to extend drone power autonomy is the use of docking stations to support both landing and recharging of the drone. To this end, we introduce a novel wireless drone docking station with three commercial wireless charging modules. We have developed two independent units, both in mechanical and electrical aspects: the energy transmitting unit and the energy receiving unit. We have also studied the efficiency of wireless power transfer and demonstrated the advantages of connecting three receiver modules connected in series and parallel. We have achieved maximum output power of 96.5 W with a power transfer efficiency of 56.6% for the series connection of coils. Finally, we implemented the system in practice on a drone and tested both energy transfer and landing.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Fuzzy controller Design Based on the Phase Plane Isoclines

Fuzzy Controller Design Based on the Phase Plane Isoclines

引用

Mediterranean Conference on control and Automation (MED)

作者： Stjepan Bogdan Zdenko Kovacic Larics-Laboratory for Robotics and Intelligent Control Systems Faculty of Electrical Engineering and Computing University of Zagreb Zagreb Croatia

In this paper we describe a procedure that exploits geometric properties of state space in the investigation of the system stability. Although this method is cumbersome, its practical value becomes clear in the situation when state space is reduced to a phase plane, which is the case in a second-order system. Then phase plane analysis offers well known procedures (especially in case f(.) is linear) for the determination of the system stability. Simulation results, obtained by implementation of the proposed method on the fuzzy controller design, are given at the end of the paper

关键词： Fuzzy control Fuzzy systems control systems Sliding mode control Stability analysis Nonlinear control systems Fuzzy logic State-space methods Stability criteria Lyapunov method

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：