检索结果-内蒙古大学图书馆

第42届中国控制会议

作者： Shuhan He Gang Yu Yongbo Li Fengyu Zhang Wangyong He School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation Complex Systems Huaxin Cement Technology Management (Wuhan) Co. Ltd

The anti-sway issue with crane systems is discussed in this essay. Because cranes are undriveable and nonlinear,implementing anti-sway controllers becomes much more challenging. This work suggests a crane anti-sway controller that uses feedback linearization(FL) in conjunction with the Equivalent-Input-Disturbance(EID) technique to address the issues. to reduce the problem that the feedback linearization largely relies on the model's *** crane system is first treated as a linear system, after which the unmodeled disturbances, nonlinear components, and external disturbances of the system are treated as the total disturbances of the system, and the effects of these disturbances are then compensated for using disturbance estimation. Finally, simulation experiments confirm that the maximum steady-state fluctuations of the position and angle of the anti-sway controller based on the equivalent input disturbance method and the feedback linearization method are 14 and 6.85percent, respectively, of those estimated without *** demonstrates the potency of this approach.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Novel Rate of Penetration Fusion Modeling Method based on Improved Dung Beetle Optimization Algorithm and Support Vector Regression 26

A Novel Rate of Penetration Fusion Modeling Method based on ...

引用

26th International Conference on Industrial technology, ICIT 2025

作者： Zhou, Yang Zhang, Zihan Chen, Shipeng Wu, Min Chen, Xin School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China School of Future Technology China University of Geosciences Wuhan430074 China

ISBN: (纸本)9798331521950

The rate of penetration (ROP) is a critical indi-cator for evaluating drilling efficiency. Developing an accurate ROP model is essential for optimizing drilling performance and addressing process control challenges. However, ROP modeling in deep geological drilling is complicated by nonlinearity, diverse working conditions, and high-dimensional variations. To overcome these challenges, a fusion modeling approach for ROP is proposed. First, the fuzzy C-means clustering method is applied to classify drilling data into different working con-ditions. Based on this classification, support vector regression is employed to develop ROP sub-models, effectively addressing nonlinearity. To further enhance model accuracy, an improved dung beetle optimization algorithm (IDBO) is designed to deter-mine optimal model parameters and integrate the sub-models, thereby resolving issues related to multiple working conditions and high-dimensional variations. The IDBO incorporates four key enhancements, average weight, chaos disturbance, modified local search, and re-updating of the best solution, to strength-en its global search capability. Comparative results using the IEEE CEC2017 benchmark test functions demonstrate that the proposed algorithm outperforms others in 12 test functions, highlighting its strong global optimization ability. Additionally, results from real-world drilling data validate the effectiveness of the proposed modeling approach in practical applications. © 2025 IEEE.

关键词： Clustering algorithms

来源：评论

学校读者我要写书评

暂无评论

intelligent Monitoring Based on Integrated Temporal Dictionary Learning with Isometric Mapping for Geological Drilling Process 26

Intelligent Monitoring Based on Integrated Temporal Dictiona...

引用

26th International Conference on Industrial technology, ICIT 2025

作者： Ma, Tianyu Du, Sheng Fan, Haipeng Huang, Cheng School of Future Technology China University of Geosciences Wuhan430074 China School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

ISBN: (纸本)9798331521950

Geological drilling process, owing to Complex geological environment and harsh downhole conditions, generates data including characteristics such as pressure, rotational speed, and depth, which are frequently high-dimensional and noisy. These characteristics make real-time monitoring more complex. Existing methods in the geological drilling process, such as rule-based systems and threshold techniques, struggle to handle the complexity and high dimensionality of drilling data, leading to high false alarm rates and low detection accuracy. This paper develops an integrated temporal dictionary learning with isometric mapping method for monitoring geological drilling process. Specifically, Isometric Mapping is employed to perform dimensionality reduction on high-dimensional data, thereby retaining the structural features in the lower-dimensional space. Subsequently, Lasso regularization is applied for sparse coding to extract essential features from the reduced data. To address the fluctuations arising from the iterative dictionary learning process, a temporal smoothing term is incorporated to ensure the stability of the dictionary across different time steps. After that, the reconstruction errors were adopted to achieve comprehensive statistical indicators. Then the overall monitoring was realized for the plant-wide process. The effectiveness and robustness of the proposed method are demonstrated through case studies on the Tennessee-Eastman process and the actual geothermal drilling process. © 2025 IEEE.

关键词： Mapping

来源：评论

学校读者我要写书评

暂无评论

Multi-feature Fusion Based Deep Forest for Hyperspectral Image Classification 16th

Multi-feature Fusion Based Deep Forest for Hyperspectral Ima...

引用

16th International Conference on Bio-Inspired Computing: Theories and Applications, BIC-TA 2021

作者： Liu, Xiaobo Mohammad, Mostofa Zaman Zhang, Chaochao Gong, Xin Cai, Zhihua School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China School of Computer Science China University of Geosciences Wuhan430074 China

ISBN: (纸本)9789811912528

Multi-feature fusion is a useful way to improve the classification of hyperspectral image (HSI). But the multi-feature fusion is usually at the decision level of classifier, which causes less link between features or poor extensibility of feature. In this paper, we propose a multi-feature fusion based deep forest method for HSI classification, named mfdForest. In mfdForest, the morphological features, saliency features, and edge features are extracted, then the three deep multi-grained scanning branches in dgcForest (one of improved deep forest) are used to extract and fuse the extracted features deeply, and the fused features are sent into cascade forest in dgcForest for classification. Experimental results indicate that the proposed framework consumes less training time and has better performance on two HSI data sets. © 2022, Springer Nature Singapore Pte Ltd.

关键词： Spectroscopy

来源：评论

学校读者我要写书评

暂无评论

Cam Profile Optimization for a Piezoelectric-Based Sole Energy Harvester

Cam Profile Optimization for a Piezoelectric-Based Sole Ener...

引用

IEEE International Conference on Robotics and Biomimetics

作者： Haisu Liao Zhongliang Ren Yidi Wang Xinyu Wu Fei Gao Southern University of Science and Technology Shenzhen China Guangdong Provincial Key Laboratory of Robotics and Intelligent System Shenzhen Institute of Advanced Technology Chinese Academy of Sciences Shenzhen China Guangdong-Hong Kong-Macao Joint Laboratory of Human-Machine Intelligence-Synergy Systems Shenzhen China

ISBN: (数字)9798331509644

ISBN: (纸本)9798331509651

Harvesting energy from the human body to extend the operational time for low-power has gained significant attention. Recently, researchers have focused on biomechanical energy harvesting from human feet while walking. This paper presents an optimization of the cam profile for a piezoelectric-based sole energy harvester designed to be worn on the bottom of shoes to power electronic devices. Specifically, cams with linear polynomial and exponential functions were designed to actuate the piezoelectric transducers (PZTs). Force analysis revealed that the exponential function cam induces more significant deformation in the PZTs than the linear polynomial cam. Preliminary tests on a healthy subject validated this design, showing that the exponential function cam produced an average output power of 0.16mW at a walking speed of 5.5 km/h, indicating a 78% improvement over the linear polynomial cam. Moreover, the optimization rate increased with the growing walking speed.

关键词： Legged locomotion Deformation Force Voltage Polynomials Energy harvesting Power generation Optimization Lead zirconate titanate Testing

来源：评论

学校读者我要写书评

暂无评论

A Chaotic Encryption Algorithm with Dynamic Key Enabled by Power-Division Multiplexed Transmission

A Chaotic Encryption Algorithm with Dynamic Key Enabled by P...

引用

Asia Communications and Photonics Conference and Exhibition (ACP)

作者： Yinchen Ding Yi Lei Qi Lu Zhongyi Guo Bin Chen School of Computer Science and Information Engineering Hefei University of Technology Hefei China Intelligent Interconnected Systems Laboratory of Anhui Province Hefei University of Technology Hefei China State Key Laboratory of Advanced Optical Communication Systems and Networks Shanghai Jiao Tong University China

Using power-division multiplexing, a chaotic encryption method is proposed based on dynamic key generated from the instantaneously transmitted information. The influence of power allocation is analyzed and the securit...

关键词：

来源：评论

学校读者我要写书评

暂无评论

Family of Mutually Uncorrelated Codes for DNA Storage Address Design

IEEE Transactions on Nanobioscience

引用

IEEE Transactions on Nanobioscience 2025年 PP卷 PP页

作者： Liu, Zhenlu Cao, Ben Shao, Qi Zheng, Yanfen Wang, Bin Zhou, Shihua Zheng, Pan Dalian University Key Laboratory of Advanced Design and Intelligent Computing Ministry of Education School of Software Engineering Dalian116622 China Dalian University of Technology School of Computer Science and Technology Dalian116024 China University of Canterbury Upper Riccarton Department of Accounting and Information Systems Christchurch8140 New Zealand

Deoxyribonucleic acid (DNA) has become an ideal medium for long-term storage and retrieval due to its extremely high storage density and long-term stability. But access efficiency is an existing bottleneck in DNA storage, especially the lack of high-quality random access address sequences. Therefore, in this paper, we report a series of approaches based on k-weakly mutually uncorrelated (k-WMU) codes to design the address sequence to improve the access efficiency of DNA storage. To address the problem of DNA sequences that are poorly scalable at the base level, we propose a 0-m-ruling coding scheme combined with k-WMU codes that can make address sequences avoid generating secondary structure with stem lengths ranging from 3 to 9. Based on the decoupled structure, We further extend the k-WMU codes with error correction function while satisfying combinatorial biological constraints. In order to investigate the performance of the designed address sequences for real-world applications, we perform simulation experiments based on thermodynamic properties and error correction capability as well as compared the minimum free energy (MFE), melting temperature (TM), and average decoding success rate (ADSR) with previous work. The results show that designed address sequences have a high MFE value and ADSR and a substantial reduction in TM-variance while satisfying the combinatorial biological constraints. As the quality of address sequences improves, this will help to achieve accurate random access as well as enhance the robustness of the DNA storage system. © 2002-2011 IEEE.

关键词： DNA sequences

来源：评论

学校读者我要写书评

暂无评论

A Stacking Ensemble Learning Method for Non-Intrusive Appliance Load Monitoring

A Stacking Ensemble Learning Method for Non-Intrusive Applia...

引用

Chinese Control and Decision Conference, CCDC

作者： Xudong Cheng Ding Li Wenkai Hu Jinghao Xu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Ministry of Education Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan China School of Electrical and Information Engineering Wuhan Institute of Technology Wuhan China

ISBN: (数字)9798350387780

ISBN: (纸本)9798350387797

Non-Intrusive Load Monitoring (NILM) collects the overall power consumption information from the power panel with advanced metering infrastructure, and obtains the operating states and power consumption information of each electrical appliance through load decomposition algorithms, so as to come up with appropriate strategies to reduce energy consumption and improve energy efficiency, which is of great significance for energy conservation and reduction. In recent years, NILM methods based on deep learning algorithms have received much attention and achieved good results, but the type of features extracted by a single deep learning model is limited, resulting in the model’s inability to overcome the bottleneck of accurate decomposition. To address the above problems, this paper proposes a deep ensemble learning framework for NILM, which takes the total active power sequence as input and synthesizes the advantages of multiple deep learning neural network models to further improve the performance of appliance identification and power disaggregation. Experiments are designed and conducted on the UK-DALE dataset to verify the effectiveness of the proposed deep ensemble learning method for NILM. The experimental results show that the method proposed in this paper has more advantages and is more promising in terms of various metrics compared to single deep learning approaches.

关键词： Deep learning Training Load monitoring Power demand Accuracy Stacking Neural networks

来源：评论

学校读者我要写书评

暂无评论

Automated Sewer Pipe Defect Classification Using Inspection Robot Imagery and Deep Neural Network

Automated Sewer Pipe Defect Classification Using Inspection ...

引用

RSI/ISM International Conference on Robotics and Mechatronics (ICROM)

作者： Saleh Goharinezhad Alireza Hadi Sayeh Mirzaei Department of Mechatronics Advanced Service Robots Laboratory School of Intelligent Systems Engineering College of Interdisciplinary Science and Technology University of Tehran Tehran Iran School of Engineering Science College of Engineering University of Tehran Tehran Iran

ISBN: (数字)9798331529734

ISBN: (纸本)9798331529741

Sewer systems play a critical role in transporting wastewater. Efficient maintenance requires accurate identification of sewer pipe defects, traditionally performed through manual interpretation of Closed-Circuit Television (CCTV) images from robot inspections. This manual process is time-consuming, labor-intensive, and susceptible to human error. While conventional computer vision methods (machine learning methods) have been explored, they often involve extensive image pre-processing and intricate feature extraction. In this study, we propose an automated approach for classifying sewer pipe defects in Iran using deep learning, specifically leveraging the ResNet50 architecture for defect classification. We applied this deep convolutional neural network (CNN) model to automatically detect three common defect types as root intrusions, deposits, and open joints within a dataset 4630 images extracted from CCTV inspection videos of sewer pipes. Our model achieved an average testing accuracy of 96%, highlighting its potential for automating the interpretation of sewer CCTV footage.

关键词： Adaptation models Accuracy TV Manuals Inspection Robustness Convolutional neural networks Wastewater Videos Testing

来源：评论

学校读者我要写书评

暂无评论

Data-driven control of consensus tracking for discrete-time multi-agent systems

引用

Journal of the Franklin Institute 2023年第7期360卷 4661-4674页

作者： Xiufeng Zhang Gang Wang Jian Sun Faculty of Mechanical and Electrical Engineering Kunming University of Science and Technology Kunming 650504 China Yunnan International Joint Laboratory of Intelligent Control and Application of Advanced Equipment Kunming 650504 China School of Automation Beijing Institute of Technology Beijing 100081 China Key Lab of Intelligent Control and Decision of Complex Systems Beijing 100081 China

This paper investigates the consensus tracking problem of leader-follower multi-agent systems. Different from most existing works, dynamics of all the agents are assumed completely unknown, whereas some input-output data about the agents are available. It is well known from the Willems et al. Fundamental Lemma that when inputs of a linear time-invariant (LTI) system are persistently exciting, all possible trajectories of the system can be represented in terms of a finite set of measured input-output data. Building on this idea, the present paper proposes a purely data-driven distributed consensus control policy which allows all the follower agents to track the leader agent’s trajectory. It is shown that for a linear discrete-time multi-agent system, the corresponding controller can be designed to ensure the global synchronization with local data. Even if the data are corrupted by noises, the proposed approach is still applicable under certain conditions. Numerical examples corroborate the practical merits of the theoretical results.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：