检索结果-内蒙古大学图书馆

In situ Hydrothermal Oxidation of Ternary FeCoNi Alloy Electrode for Overall Water Splitting

Energy & Environmental materials 2024年第2期7卷 161-170页

作者： Yuwei Chen Lixia Yang Chao Li Yuqiu Wu Xiao Lν Hairen Wang Jun'e Qu Key Laboratory for the Green Preparation and Application of Functional Materials Hubei Key Laboratory of Polymer MaterialsSchool of Materials Science and EngineeringHubei UniversityWuhan 430062China Faculty of Material science and Chemistry China University of GeosciencesWuhan 430074China

Exploring noble metal-free catalyst materials for high efficient electrochemical water splitting to produce hydrogen is strongly desired for renewable energy *** this article,a novel bifunctional catalytic electrode of insitu-grown type for alkaline water splitting based on FeCoNi alloy substrate has been successfully prepared via a facile one-step hydrothermal oxidation route in an alkaline hydrogen peroxide *** shows that the matrix alloy with the atom ratio 4∶3∶3 of Fe∶Co∶Ni can obtain the best catalytic performance when hydrothermally treated at 180℃for 18 h in the solution containing 1.8 M hydrogen peroxide and 3.6 M sodium *** as-prepared Fe_(0.4)Co_(0.3)Ni_(0.3)-1.8 electrode exhibits small overpotentials of only 184 and 175 mV at electrolysis current density of 10 mA cm^(-2)for alkaline OER and HER processes,*** overall water splitting at electrolysis current density of 10 mA cm^(-2)can be stably delivered at a low cell voltage of 1.62 *** characteristics including the large specific surface area,the high surface nickel content,the abundant catalyst species,the balanced distribution between bivalent and trivalent metal ions,and the strong binding of in-situ naturally growed catalytic layer to matrix are responsible for the prominent catalytic performance of the Fe_(0.4)Co_(0.3)Ni_(0.3)-1.8 electrode,which can act as a possible replacement for expensive noble metal-based materials.

关键词： alkaline water electrolysis bifunctional electrocatalyst FeCoNi alloy hydrothermal oxidation in-situ growing

来源：评论

学校读者我要写书评

暂无评论

Hydrothermal carbonization pretreatment makes a remarkable difference in activation of rice and lettuce in food waste

引用

Green Chemical engineering 2024年第3期5卷 348-363页

作者： Lijun Zhang Yifan Sun Chao Li Shu Zhang Mortaza Gholizadeh Xun Hu School of Material Science and Engineering University of JinanJinan250022China Joint International Research Laboratory of Biomass Energy and Materials College of Materials Science and EngineeringNanjing Forestry UniversityNanjing210037China Faculty of Chemical and Petroleum Engineering University of TabrizTabrizIran

Cooked rice and the vegetables like lettuce are common kitchen waste,which are carbonaceous materials and have the potential as feedstock for the production of activated *** is similar to hydrothermal treatment(HTC),which might impact the subsequent activation of kitchen *** this study,the HTC of lettuce,rice,or their mixture and the activation of the resulting hydrochars were *** results indicated that cross-polymerization between the N-containing organics from lettuce and the sugar derivatives from rice took place in their co-HTC,which significantly increased the hydrochar *** of the hydrochar from the coHTC generated the AC with a yield of 2 times that from direct activation of mixed lettuce/***,the coHTC facilitated aromatization,reducing reactivity with K2C2O4in activation and producing the AC with main micropores and low specific surface *** of the hydrochar from HTC of rice followed the above trend,while that from lettuce was the *** organics in lettuce were thermally unstable and could not undergo sufficient *** activation of hydrochar from HTC of lettuce thus generated the AC with the lowest yield,but the highest specific surface area(1684.9 m2/g),abundant mesopores,and superior capability for adsorption of ***,the environmental impacts and energy consumption for the production of AC from the hydrochar of lettuce were higher than that from hydrochar of co-HTC.

关键词： Food waste Hydrothermal pretreatment Hydrochar Chemical activation Products properties

来源：评论

学校读者我要写书评

暂无评论

Highly efficient ternary organic solar cells with excellent open-circuit voltage and fill factor via precisely tuning molecular stacking and morphology

引用

science China Chemistry 2024年第3期67卷 963-972页

作者： Dinghong Sun Zhenyu Chen Jianfeng Zhang Wei Song Jingyu Shi Jintao Zhu Yuanyuan Meng Fei Jin Shuncheng Yang Ziyi Ge Faculty of Electrical Engineering and Computer Science Ningbo UniversityNingbo 315211China Faculty of Material Science and Chemical Engineering Ningbo UniversityNingbo 315211China Zhejiang Provincial Engineering Research Center of Energy Optoelectronic Materials and Devices Ningbo Institute of Materials Technology&EngineeringChinese Academy of SciencesNingbo 315201China Center of Materials Science and Optoelectronics Engineering University of Chinese Academy of Sciences Beijing 100049China Department of Chemical and Environmental Engineering University of Nottingham NingboNingbo 315100China

The micro-morphology and molecular stacking play a key role in determining the charge transport process and nonradiative energy loss, thus impacting the performances of organic solar cells(OSCs). To address this issue, a non-fullerene acceptor PhC6-IC-F with alkylbenzene side-chain, possessing optimized molecular stacking, complementary absorption spectra and forming a cascade energy level alignment in the PM6:BTP-eC9 blend, is introduced as guest acceptor to improve efficiency of ternary OSCs. The bulky phenyl in the side-chain can regulate crystallinity and optimizing phase separation between receptors in ternary blend films, resulting in the optimal phase separations in the ternary films. As a result, high efficiencies of 18.33% as photovoltaic layer are obtained for PhC6-IC-F-based ternary devices with excellent fill factor(FF) of 78.92%. Impressively, the ternary system produces a significantly improved open circuit voltage(V_(oc)) of 0.857 V compared with the binary device,contributing to the reduced density of trap states and suppressed non-radiative recombination result in lower energy loss. This work demonstrates an effective approach for adjusting the aggregation, molecular packing and fine phase separation morphology to increase V_(oc) and FF, paving the way toward high-efficiency OSCs.

关键词： alkylbenzene side-chain morphology regulation ternary blends organic solar cells

来源：评论

学校读者我要写书评

暂无评论

Binder-induced ultrafast PF_(6)^(-)-intercalation toward a high-voltage,high-power and long-cycling zinc-graphite dual-ion battery

引用

Rare Metals 2024年第10期43卷 5017-5029页

作者： Gen Li Xiao-Jun Shi Ting Dong Qian Yu Zhi-Fei Mao Xin-Hua Liu Rui Wang Bei-Bei He Jun Jin Yan-Sheng Gong Huan-Wen Wang Engineering Research Center of Nano-Geomaterials of Ministry of Education Faculty of Material Science and ChemistryChina University of GeosciencesWuhan 430074China College of Resources and Environment South-Central Minzu UniversityWuhan430074China School of Transportation Science and Engineering Beihang UniversityBeijing 100191China

Metallic zinc is an ideal anode material owing to its high theoretical capacity(819 mAh·g^(-1)),ecofriendliness,low cost and high safety,which have driven fast development of Zn-ion batteries(ZIBs).However,the practical application of current ZIBs is significantly restricted by irregular dendrite growth of zinc anode and the low working voltage(usually<2 V)of cathode ***,we report a high-voltage Zn-based dualion battery(DIB),which is constructed by a graphite cathode,a Zn anode,and 3 M LiPF_(6)in the ethyl methyl carbonate(EMC)*** the corrosion interaction of Li^(+)ions,Zn^(2+)can be easily dissolved from Zn anode into the electrolyte to enable dendrite-free Zn^(2+)plating/stripping at the ***,an aqueous carboxymethyl cellulose(CMC)binder is employed to generate a robust cathode electrolyte interface(CEI)layer on the graphite cathode,which renders ultrafast PF_(6)^(-)-de-/intercalation into *** resultant Zn-graphite DIB operates stably at a high cut off voltage of 3.2 V,corresponding to an average output voltage of 2.2 *** 9000cycles at 5C,the high capacity retention of 95.9% can be achieved with~100% Coulomb *** on the mass of cathode material,our Zn-graphite battery exhibits ultrafast rate capability(60 C,a discharge time of 44 s)and high energy/power densities(208 Wh·kg^(-1)at 214 W·kg^(-1);142 Wh·kg^(-1)at 8692 W·kg^(-1)),which holds great promise for large-scale energy storage.

关键词： Zn-ion batteries PF_(6)^(-)-de-/intercalation Graphite Binder High-voltage

来源：评论

学校读者我要写书评

暂无评论

Enhanced electromagnetic wave absorption via optical fiber-like PMMA@Ti_(3)C_(2)T_(x)@SiO_(2) composites with improved impedance matching

引用

Nano Research 2024年第3期17卷 1676-1686页

作者： Huanhuan Niu Xuewen Jiang Wei Li Zhiyu Min Budi Riza Putra Wulan Tri Wahyuni Hailong Wang Rui Zhang Bingbing Fan School of Material Science and Engineering Zhengzhou UniversityZhengzhou 450001China School of Materials Science and Engineering Tongji UniversityShanghai 201804China Department of Materials and Earth Sciences Technical University of DarmstadtDarmstadt 64287Germany School of Material Science and Engineering Luoyang Institute of Science and TechnologyLuoyang 471023China Research Center for Metallurgy National Research and Innovation Agency(BRIN)PUSPIPTEK Gd.470South TangerangBanten 15315Indonesia Analytical Chemistry Division Department of ChemistryFaculty of Mathematics and Natural SciencesIPB UniversityWest Java 16680Indonesia

Ti_(3)C_(2)T_(x) nanosheets have attracted significant attention for their potential in electromagnetic wave absorption(EWA).However,their inherent self-stacking and exorbitant electrical conductivity inevitably lead to serious impedance mismatch,restricting their EWA ***,the optimization of impedance matching becomes *** this work,we developed polymethyl methacrylate(PMMA)@Ti_(3)C_(2)T_(x)@SiO_(2) composites with a sandwich-like core–shell structure by coating SiO_(2) on PMMA@Ti_(3)C_(2)T_(x).The results demonstrate that the superiority of the SiO_(2) layer in combination with PMMA@Ti_(3)C_(2)T_(x),outperforming other relative graded distribution structures and meeting the requirements of EWA *** resulting PMMA@Ti_(3)C_(2)T_(x)@SiO_(2) composites achieved a minimum reflection loss of-58.08 dB with a thickness of 1.9 mm,and an effective absorption bandwidth of 2.88 *** analysis revealed that the structural design of SiO_(2) layer not only optimized impedance matching,but also synergistically enhanced multiple loss mechanisms such as interfacial polarization and dipolar ***,this work provides valuable insights for the future preparation of high-performance electromagnetic wave absorbing Ti_(3)C_(2)T_(x)-based composites.

关键词： polymethyl methacrylate(PMMA)@Ti_(3)C_(2)T_(x)@SiO_(2)composites impedance match SiO_(2)layer optical fiber-like structure interfacial polarization and dipolar polarization

来源：评论

学校读者我要写书评

暂无评论

Potential use of Ulva intestinalis-derived biochar adsorbing phosphate ions in the cultivation of winter wheat Tristicum aestivum

引用

Bioresources and Bioprocessing 2024年第1期11卷 371-394页

作者： Natalia Niedzbała Ewa Lorenc-Grabowska Piotr Rutkowski Jacek Chęcmanowski Anna Szymczycha-Madeja Maja Wełna Izabela Michalak Department of Advanced Material Technologies Faculty of ChemistryWrocław University of Science and TechnologyWrocławPoland Department of Process Engineering and Technology of Polymer and Carbon Materials Faculty of ChemistryWrocław University of Science and TechnologyWrocławPoland Department of Analytical Chemistry and Chemical Metallurgy Faculty of ChemistryWrocław University of Science and TechnologyWrocławPoland

In this work,the properties of biochar produced from green macroalga Ulva intestinalis by pyrolysis were studied at temperatures of 300,500,and 700°*** biochar was characterized in terms of multielemental composition,BET surface area,total pore volume,and biosorption properties toward phosphate *** produced at 700°C-25 m2/g had the highest surface *** kinetics and isotherms of sorption processes of phosphate ions as sorbate by these sorbents were *** biochar was able to remove 84.3%of phosphate ions from wastewater,whereas non-modified biochar-only 40.6%.Hence,biochar enriched with phosphate ions can serve as a valuable soil *** experiments performed on winter wheat(Triticum aestivum)with a 3%addition of dry Ulva intestinalis,pristine biochar,and Mg-modified biochar enriched with phosphate ions showed that these amendments stimulated plant growth(length and fresh weight of plants)as well as enlarging the chlorophyll content in *** results indicate that the production of biochar(pristine and Mg-impregnated)is a sustainable option to valorize the biomass of seaweeds,and to recycle phosphorus from wastewater.

关键词： Green seaweed Pyrolysis Biochar Phosphate ions Wastewater treatment Soil additives

来源：评论

学校读者我要写书评

暂无评论

Visible light promoted aerobic selective photo-oxidation of cyclohexene on LaCo_(x)Cu_(1−x)O_(3) catalyst

引用

Nano Research 2024年第8期17卷 6940-6950页

作者： Xu Guo Liru Song Wenyu Wang Fengfeng Li Minh Ngoc Ha Jun Tang Qiang Ling Ping Cui Qingping Ke College of Chemistry and Chemical Engineering Anhui University of TechnologyMaanshan 243000China VNU Key Laboratory of Advanced Material for Green Growth Faculty of ChemistryUniversity of ScienceVietnam National UniversityHanoi 100000Vietnam

Heterogeneously catalyzed liquid oxidation of olefins with O_(2) provides an alternative way for synthesizing high-value added ***,we report a straightforward urea-redox and sol-gel process for synthesizing LaCo_(x)Cu_(1−x)O_(3) for aerobic photooxidation of *** research highlights a marked increase in the proportions of Co^(2+) and Cu+species in a low chemical state,as well as enhanced visible light absorption through this *** investigations suggest that the catalytic process,particularly with LaCo_(0.7)Cu_(0.3)O_(3),involves a radical pathway mediated by reactive oxygen *** presence of Cu+/Co^(2+) species and surface oxygen vacancies is proposed to boost O_(2) adsorption and activation on the catalyst,facilitating the formation of ***,Cu^(2+)/Co^(3+) species are thought to aid in generating cyclohexenederived radical *** efficient aerobic oxidation of cyclohexene on LaCo_(0.7)Cu_(0.3)O_(3) catalyst relies on the formation of reactive oxygen species and carbon radicals,facilitated by its strong visible light *** achieves a cyclohexene conversion of 89.4% and selectivity to cyclohex-2-ene-1-one of 72.2%,along with stable recyclability after six *** creation of nano-structured LaCo_(x)Cu_(1−x)O_(3) through the urea-redox and sol-gel process offers a promising avenue for the development of highly efficient catalysts for the aerobic photo-oxidation of cyclohexene to cyclohex-2-ene-1-one in the future.

关键词： perovskite oxide photocatalysis oxidation cyclohexene LaCoCuO_(3) cyclohex-2-ene-1-one

来源：评论

学校读者我要写书评

暂无评论

Robust H-infinity Control for the Longitudinal Dynamics of a Fixed Wing Aircraft

Robust H-infinity Control for the Longitudinal Dynamics of a...

引用

AIAA science and Technology Forum and Exposition, AIAA SciTech Forum 2025

作者： Rashad, Maha El-Badawy, Ayman Hamza, Abdelaziz Faculty of Engineering Mechanical Engineering Department German International University Cairo Egypt Faculty of Engineering and Material Science Mechatronics Engineering Department German University in Cairo Cairo Egypt

ISBN: (数字)9781624107238

ISBN: (纸本)9781624107238

In this paper, the design and application of a feedback-linearization-based controller combined with a robust µ-synthesis for trajectory tracking for the longitudinal dynamics of an aircraft is presented. This approach is compared with a full-state feedback controller to validate this control strategy. The proposed approach aims to enhance the robustness and performance of the system in the presence of various uncertainties and disturbances, including unmodeled nonlinear dynamics and wind disturbances. The feedback linearization technique is used to eliminate model non-linearities to enable linear control methodologies to be effectively applied. Subsequently, a µ-synthesis controller is designed to ensure robust performance and stability under structured uncertainties. The simulation results indicate that the proposed controller effectively ensures the aircraft follows the desired position trajectories, despite the presence of wind disturbances and unmodeled nonlinear dynamics, thus, the control system satisfies the requirements. © 2025, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.

关键词： Feedback linearization

来源：评论

学校读者我要写书评

暂无评论

Low thermal conductivity and anisotropic thermal expansion of ferroelastic(Gd_(1−x)Y_(x))TaO_(4) ceramics

引用

Journal of Advanced Ceramics 2022年第11期11卷 1696-1713页

作者： Chenkai QU Lin CHEN Liang LV Yuncheng WANG Xiaolan JI Haitao YUN Chaoqun SU Jing FENG Faculty of Material Science and Engineering Kunming University of Science and TechnologyKunming 650093China AECC South Industry Co. Ltd.Zhuzhou 412000China

In this paper,(Gd_(1−x)Y_(x))TaO_(4) ceramics have been fabricated by solid-phase synthesis *** sample was found to crystallize in a monoclinic phase by X-ray diffraction(XRD).The properties of(Gd_(1−x)Y_(x))TaO_(4) were optimized by adjusting the ratio of Gd/Y.(Gd_(1−x)Y_(x))TaO_(4) had a low high-temperature thermal conductivity(1.37–2.05 W·m^(−1)·K^(−1)),which was regulated by lattice *** phase transition temperature of the(Gd_(1−x)Y_(x))TaO_(4) ceramics was higher than 1500℃.Moreover,the linear thermal expansion coefficients(TECs)were 10.5×10^(−6) K^(−1)(1200℃),which was not inferior to yttria-stabilized zirconia(YSZ)(11×10^(−6) K^(−1),1200℃).(Gd_(1−x)Y_(x))TaO_(4) had anisotropic thermal ***,controlling preferred orientation could minimize the TEC mismatch when(Gd_(1−x)Y_(x))TaO_(4) coatings were deposited on different substrates as thermal barrier coatings(TBCs).Based on their excellent properties,it is believed that the(Gd_(1−x)Y_(x))TaO_(4) ceramics will become the next generation of high-temperature thermal protective coatings.

关键词： thermal barrier coatings(TBCs) thermal conductivity high-temperature phase stability high-temperature X-ray diffraction(XRD) anisotropic thermal expansion

来源：评论

学校读者我要写书评

暂无评论

Thermodynamic and experimental evaluation of the sustainable recycling of magnesium alloy scrap by vacuum distillation based on vapor-liquid equilibrium

引用

Journal of Magnesium and Alloys 2025年第1期13卷 283-295页

作者： Lipeng Wang Dong Liang Yang Tian Jianxue Chai Rui Li Shuji Wu Bin Yang Baoqiang Xu Yong Deng Key Laboratory for Nonferrous Vacuum Metallurgy of Yunnan Province Kunming University of Science and TechnologyKunmingChina State Key Laboratory of Complex Non-ferrous Metal Resources Clean Utilization Kunming University of Science and TechnologyKunmingChina Engineering Research Center of Aluminum Industry of Yunnan Province Kunming University of Science and TechnologyKunmingChina National Engineering Research Center of Vacuum Metallurgy Kunming University of Science and TechnologyKunmingChina Faculty of Metallurgical and Energy Engineering Kunming University of Science and TechnologyKunmingChina Shanxi Regal Advanced Material Co. Ltd.Yuncheng CityChina

Magnesium(Mg)alloys are widely used lightweight structural materials for automobiles and help reduce carbon ***,their use increases the production of Mg alloy scrap,which is recycled at a much lower rate than aluminum,and its greater complexity poses challenges to existing recycling *** vacuum distillation can be used to recycle Mg alloy scrap,this requires optimizing and maximizing metal recirculation,but there has been no thermodynamic analysis of this *** this study,the feasibility and controllability of separating inclusions and 23 metal impurities were evaluated,and their distribution and removal limits were *** analyses and experimental results showed that inclusions and impurity metals of separation coefficient lgβ_(i)≤-5,including Cu,Fe,Co,and Ni below 0.001 ppm,could be removed from the *** Zn entered the recycled Mg,while impurities with-1

关键词： Magnesium alloy Scrap recycling Thermodynamic analysis Impurity removal Vacuum distillation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：