Cleanliness control of advanced steels is of vital importance for quality control of the *** order to understand and control the inclusion removal during refining process in molten steel,its motion behaviors at the mu...
详细信息
Cleanliness control of advanced steels is of vital importance for quality control of the *** order to understand and control the inclusion removal during refining process in molten steel,its motion behaviors at the multiple steel/gas/slag interfaces have attracted the attention much of metallurgical *** recent development of the agglomeration of non-metallic inclusions at the steel/Ar and steel/slag interfaces has been summarized,and both the experimental as well as theoretical works have been *** terms of in situ observation of high-temperature interfacial phenomena in the molten steel,researchers utilized high-temperature confocal laser scanning microscopy to observe the movement of more types of inclusions at the interface,i.e.,the investigated inclusion is no longer limited to Al_(2)O_(3)-based inclusions but moves forward to rare earth oxides,MgO-based oxides,*** terms of theoretical models,especially the model of inclusions at the steel/slag interface,the recent development has overcome the limitations of the assumptions of Kralchevsky-Paunov model and verified the possible errors caused by the model assumptions by combining the water model and the physical *** but not least,the future work in this topic has been suggested,which could be in combination of thermal physical properties of steels and slag,as well as utilize the artificial intelligence-based methodology to implement a comprehensive inclusion motion behaviors during a comprehensive metallurgical process.
Equal channel angle pressing is recognized for its ability to refine alloy grains and alter grain orientation, thereby achieve better mechanical performance of the magnesium alloy. This study investigates the microstr...
详细信息
Equal channel angle pressing is recognized for its ability to refine alloy grains and alter grain orientation, thereby achieve better mechanical performance of the magnesium alloy. This study investigates the microstructures,dynamic recrystallization mechanism, texture development, and mechanical performance of GW94K(Mg–8.7Gd–4.18Y–0.42Zr wt. %) Mg alloy following ECAP-4 passes at 400°C and 3 mm/min. Results show that when high-temperature deformation is undertaken, twin formation is suppressed while dislocation slip is facilitated, increasing dislocation density during deformation. Following ECAP deformation, the sample displayed higher fracture elongation, TYS, and UTS than the as-solutioned GW94K alloy. In particular, the GW94K alloy performed well mechanically after ECAP-4 passes, with an ultimate TYS of 231 MPa, an UTS of 290 MPa, and an elongation of 14.8 %. DDRX and shear bands induce CDRX, both of which are important in plastic deformation. as well as in modifying microstructure and grain orientation during ECAP deformation.
The continuous white light(CWL)covering the visible and near-infrared(NIR)regions can be observed in various absorptive media excited by continuous-wave(CW)*** is valuable to stimulate more efforts in unravelling the ...
详细信息
The continuous white light(CWL)covering the visible and near-infrared(NIR)regions can be observed in various absorptive media excited by continuous-wave(CW)*** is valuable to stimulate more efforts in unravelling the involved photophysical processes and exploring its potential applications in diverse ***,we proved that the enhanced thermal-field can boost the CWL *** rare earth(RE)ions(Pr^(3+),Er^(3+)and Yb^(3+))as the photothermally active centers in Y_(2)SiO_(5)phosphor,we reveal that absorbing more excitation energy and isolating the heat conduction can lead to rapid thermal field accumulation inside the material,thereby significantly reducing the excitation threshold and enhancing white light *** results might have important implications for the understanding of thermally enhanced radiation and may facilitate the CWL commercial application in night vision,bioimaging,and non-destructive detection.
The coupling between heat and pressure is the kernel of inertia friction welding(IFW)and is still not fully understood.A novel 3D fully coupled finite element model based on a plastic friction pair was developed to si...
详细信息
The coupling between heat and pressure is the kernel of inertia friction welding(IFW)and is still not fully understood.A novel 3D fully coupled finite element model based on a plastic friction pair was developed to simulate the IFW process of a Ni-based superalloy and reveal the omnidirectional thermo-mechanical coupling mechanism of the friction *** numerical model successfully simulated the deceleration,deformation processes,and peak torsional moments in IFW and captured the evolution of temperature,contact pressure,and *** simulated results were validated through measured thermal history,optical macrography,and axial *** results indicated that interfacial friction heat was the primary heat source,and plastic deformation energy only accounted for 4%of the *** increase in initial rotational speed and friction pressure elevated the peak temperature,reaching a maximum of 1525.5K at an initial rotational speed of 2000 r/min and friction pressure of 400 *** interface heat generation could form an axial temperature gradient exceeding 320K/*** radial inhomogeneities of heat generation and temperature were manifested in a concentric ring distribution with maximum heat flux and temperature ranging from 2/5 to 2/3 *** radial inhomogeneities were caused by increasing linear velocity along the radius and an opposite distribution of contact pressure,which could reach 1.7 times the set pressure at the *** circumferential inhomogeneity of thermomechanical distribution during rotary friction welding was revealed for the first time,benefiting from the 3D *** deflection and transformation of distribution in contact pressure and Mises stress were indicators of plastic deformation and transition of quasi-steady state *** critical Mises stress was 0.5 times the friction pressure in this *** presented modeling provides a reliable insight into the thermo-mechanical coupling mechanism of IFW and lays a solid found
The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt...
详细信息
The exploitation of durable and highly active Pt-based electrocatalysts for the oxygen reduction reaction(ORR)is essential for the commercialization of proton exchange membrane fuel cells(PEMFCs).Herein,we designed Pt@Pt3Ti core-shell nanoparticles with atomic-controllable shells through precise thermal diffusing Ti into Pt nanoparticles for effective and durable *** theoretical and experiment analysis,we found that the lattice strain of Pt3Ti shells can be tailored by precisely controlling the thick-ness of Pt3Ti shell in atomic-scale on account of the lattice constant difference between Pt and Pt3Ti to optimize adsorption properties of Pt3Ti for ORR intermediates,thus enhancing its *** Pt@Pt3Ti catalyst with one-atomic Pt3Ti shell(Pt@1L-Pt3Ti/TiO2-C)demonstrates excellent performance with mass activity of 592 mA mgpt-1 and durability nearly 19.5-fold that of commercial Pt/C with neg-ligible decay(2％)after 30,000 potential cycles(0.6-1.0 V ***).Notably,at higher potential cycles(1.0 V-1.5 V ***),Pt@1L-Pt3Ti/TiO2-C also showed far superior durability than Pt/C(9.6％decayed while 54.8％for commercial Pt/C).This excellent stability is derived from the intrinsic stability of Pt3Ti alloy and the confinement effect of *** catalyst's enhancement was further confirmed in PEMFC configuration.
With the rapid development of visual information technology, image sensors are increasingly required to meet complex demands, including higher sensitivity,wider detection band, high-density integration, flexibility, a...
With the rapid development of visual information technology, image sensors are increasingly required to meet complex demands, including higher sensitivity,wider detection band, high-density integration, flexibility, and intelligent functionality [1]. However, conventional image sensors still suffer from inherent limitations, such as poor photoelectric sensitivity, narrow detection bands, and lack of multifunctionality,which significantly limit their capabilities in cutting-edge applications.
The effect of(CaO+SiO_(2))mass ratio on high-Ti vanadium titanomagnetite sintering was systematically studied at the fixed basicity(CaO/SiO_(2))of *** results show that sinter matrix strength is improved with(CaO+SiO_...
详细信息
The effect of(CaO+SiO_(2))mass ratio on high-Ti vanadium titanomagnetite sintering was systematically studied at the fixed basicity(CaO/SiO_(2))of *** results show that sinter matrix strength is improved with(CaO+SiO_(2))mass ratio while the total iron content is *** analysis indicates that the increase in(CaO+SiO_(2))mass ratio from 15.0 to 22.5 wt.%contributes to the formation of liquid phase,especially silico-ferrite of calcium and aluminum(SFCA).In addition,the formation of perovskite is inhibited and liquid phase fluidity is *** porosity of sinter matrix is reduced by 34.5%and SFCA amount is increased by 47.2%when(CaO+SiO_(2))mass ratio is increased from 15.0 to 18.0 wt.%.With the further increase in(CaO+SiO_(2))mass ratio,the structure of sinter matrix is too dense and the improved extent of SFCA amount is increasingly *** appropriate(CaO+SiO_(2))mass ratio should be 18.0 wt.%*** this condition,sinter matrix strength is greatly improved by over 13.5%compared with the base case and the total iron content can be maintained at about 49 wt.%.
Wearable electromagnetic interference(EMI)shielding fabrics with excellent electromagnetic shielding performance,oxidation resistance,and structural stability are highly demanded for the rapid development of electroni...
详细信息
Wearable electromagnetic interference(EMI)shielding fabrics with excellent electromagnetic shielding performance,oxidation resistance,and structural stability are highly demanded for the rapid development of electronic devices and wireless *** are metallic conductive materials with exceptional EMI shielding properties,but they are prone to oxidation in air and have poor structural stability and durability on fabric ***,we present a one-step assembly method to fabricate fabrics coated with MXenes and polymeric sodium alginate(SA)composite(MXene-SA).SA protects MXenes from oxidation and forms a stable interlayer structure by bonding to *** MXene-SA coated fabrics are breathable and flexible,and have a low sheet resistance of 2.12±0.08Ω/sq and a high EMI shielding performance of 37.05 dB at X-band,which is comparable to the best 42.31 ***,the MXene-SA coated fabrics exhibit high structural stability and oxidation resistance under various conditions of sonication disintegration,mechanical abuse,chemical corrosion,and humidity,compared to pure MXenes coated *** believe that the wearable and high-performance MXene-SA fabrics have great potential for the next generation of ultra-portable and wearable EMI shielding products.
Triboelectric nanogenerators(TENG)have emerged as a highly promising energy harvesting technology,attracting significant attention in recent years for their broad ***-based TENGs,with superior stretchability and sensi...
详细信息
Triboelectric nanogenerators(TENG)have emerged as a highly promising energy harvesting technology,attracting significant attention in recent years for their broad ***-based TENGs,with superior stretchability and sensitivity,have been widely reported as wearable ***,the traditional hydrogel-based TENGs suffer from freezing at low temperatures and drying at high temperatures,resulting in *** this study,we introduce an anti-freezing eutectogel,which uses a deep eutectic solvent(DES),to improve the stability and electrical conductivity of TENGs in harsh environmental *** eutectogel-based TENG(E-TENG)produces an open-circuit voltage of 776 V,a short-circuit current of 1.54μA,and a maximum peak power of 1.1 ***,the E-TENG exhibits exceptional mechanical properties with an elongation at a break of 476%under ***,it maintains impressive performances across a wide temperature range from−18 to 60℃,with conductivities of 2.15 S/m at−10℃and 1.75 S/m at−18℃.Based on the excellent weight stability of the E-TENG sensor,motion sensing can be achieved in the air,and even ***,the versatility of the E-TENG can serve as a wearable sensor,by integrating it with Bluetooth *** self-powered E-TENG can monitor various human motion signals in real-time and send the health signals directly to mobile *** research paves a new road for the applications of TENGs in harsh environments,offering wireless flexible sensors with real-time health signal monitoring capabilities.
The solidification methods of electromagnetic stirring(EMS)and non-electromagnetic stirring were employed to prepare Mg–6Gd–3Y–xZn–0.6Zr(x=1,1.5,2,3)*** evolution of alloy microstructures and the changes in proper...
详细信息
The solidification methods of electromagnetic stirring(EMS)and non-electromagnetic stirring were employed to prepare Mg–6Gd–3Y–xZn–0.6Zr(x=1,1.5,2,3)*** evolution of alloy microstructures and the changes in properties were analyzed for different Zn *** has been observed that in alloys without electromagnetic stirring,as the Zn content increases,the alloy structure gradually *** primary second phase transitions from Mg5RE phase to long-period stacking ordered(LPSO)phase,resulting in improved hardness and *** alloys subjected to electromagnetic stirring,there is a relatively higher content of the second phase,primarily consisting of LPSO *** applying electromagnetic stirring,the quantity and the type of LPSO phase in the alloy *** alloy structure becomes more uniform with electromagnetic stirring,resulting in increased hardness and reduced hardness gradients within the *** mechanical properties of alloys with electromagnetic stirring are superior to those without electromagnetic stirring.
暂无评论