检索结果-内蒙古大学图书馆

Characterizations of Ni-loaded lignite char catalysts and their performance enhancements to catalytic steam gasification of coal

引用

Journal of the Energy Institute 2022年 105卷 53-71页

作者： Tipo, Ronnachai Tippayawong, Nakorn Chaichana, Chatchawan Chimupala, Yothin Chaiklangmuang, Suparin Graduate Program in Industrial Chemistry Faculty of Science Chiang Mai University Chiang Mai50200 Thailand Department of Industrial Chemistry Faculty of Science Chiang Mai University Chiang Mai50200 Thailand Department of Mechanical Engineering Faculty of Engineering Chiang Mai University Chiang50200 Thailand Center of Excellence in Materials Science and Technology Faculty of Science Chiang Mai University Chiang Mai50200 Thailand Materials Science Research Center Faculty of Science Chiang Mai University Chiang Mai50200 Thailand

Catalyst characteristics such as specific surface area, porosity and active site play an essential role in catalyst design. Understanding of the characteristic functions in controlling catalyst activity is necessary for considering the catalyst application, especially the Ni-loaded lignite char catalyst, employed in catalytic steam gasification. In this work, the unmodified and five modified catalysts were used to study the effect of catalyst characteristics on their performance for catalytic steam gasification of coal in the two-stage fixed-bed reactor. The findings indicated that the fresh acid modified catalysts increased specific surface area and micropore formation, including the smaller Ni metal crystallite size, the decreasing of Ni metal nanoparticle size and the well-dispersed of Ni metal nanoparticles. Meanwhile, the fresh modified catalysts by the alkali and the combined alkali-acid treatments promoted mesopore formation. Enhancing catalytic steam gasification of coal, it was found that the mesoporosity of catalyst was the considerable initial characteristic for controlling the catalyst activity. The total gas yields of the mesoporous catalysts were in the range of 50.65–77.70 mmol/gVM,feed, while the total gas yields of the microporous catalysts were 43.82–55.34 mmol/gVM,feed. After catalyst testings, the specific surface areas and number of mesopores in the spent catalysts were increased by steam. Remarkably, these changing pore sizes affected the transformations of the isotherms (type I + II to type II) and the hysteresis loops (type H4 to type H3). Also, steam influenced the conversion of Ni metals to NiO, Ni(OH)2 and Ni2O3. For thermal property, all spent catalysts had high thermal stability. The modified catalysts could decrease carbon deposition more than the unmodified catalyst, which was an upside for catalyst reusability. © 2022 Energy Institute

关键词： Catalyst activity

来源：评论

学校读者我要写书评

暂无评论

Unravelling the strong interplay for interfacial magnetic switching in metal-organic-based spintronics

引用

Journal of materials Chemistry C 2024年第11期12卷 3931-3942页

作者： Chen, Wan-Ting Yu, Li-Chung Lin, Jiu-Hua Cheng, Su Ling Shiu, Hung Wei Lai, Yu-Ling Chu, Ying-Hao Chin, Yi-Ying Wang, Jeng-Han Hsu, Yao-Jane National Synchrotron Radiation Research Center Hsinchu30076 Taiwan Graduate Program for Science and Technology of Accelerator Light Sources National Yang Ming Chiao Tung University Hsinchu30076 Taiwan Department of Materials Science and Engineering National Tsing Hua University Hsinchu30013 Taiwan Department of Chemistry National Taiwan Normal University Taipei11677 Taiwan Department of Photonics National Cheng Kung University Tainan70101 Taiwan Department of Physics National Chung Cheng University Chiayi62102 Taiwan

Organic semiconductors are promising building blocks for multifunctional spintronics. The spinterface plays a key role in affecting the magnetic properties of the performance of spin-based devices. Herein, we reveal the strong interfacial interplay affecting the magnetic switching at the interface of the synthetic paramagnetic tris(8-hydroxyquinoline)iron(iii) (Feq3) layer on the ferromagnetic surface. In combination with synchrotron-based analysis and density functional theory (DFT) calculations, we observed that the robust magnetic interactions of the Co/Feq3 system were strongly influenced by the interfacial reaction between Co and Feq3. As the charge transferred from the contacted Co to Feq3, the central iron was reduced from Fe(iii) to Fe(ii) and hybridized with the 8-hydroxyquinoline, causing spin polarization at the interface. The reduced central Fe(ii) exhibited apparent ferromagnetic ordering after contact with the ferromagnetic Co substrate. With increasing the Feq3 layer thickness, the central Fe reverted to its original Fe(iii) state, resulting in the disappearance of ferromagnetic ordering. The thickness dependence of the Feq3 layer on the magnetic response could be used to tune the spinterface properties and thus the interfacial magnetic interplay. These findings reveal the effect of the strong interfacial redox on the spinterface and open up a promising approach for the use of metal-organic materials in oragnic spintronic devices. © 2024 The Royal Society of Chemistry.

关键词： Organometallics

来源：评论

学校读者我要写书评

暂无评论

On-Chip Perovskite Nanocrystal Laser Integrated with Long-Range Surface Plasmon Polariton Waveguide by Etching-Free Lithographic Patterning

On-Chip Perovskite Nanocrystal Laser Integrated with Long-Ra...

引用

2022 JSAP-Optica Joint Symposia, JSAP 2022

作者： Lee, Yang-Chun Lin, Hsin-Chang Lin, Cheng-Chieh Ho, Ya-Lun Xing, Di Chen, Mu-Hsin Lin, Bo-Wei Chen, Li-Yin Chen, Chun-Wei Delaunay, Jean-Jacques School of Engineering The University of Tokyo Japan Department of Photonics National Sun Yat-sen University Taiwan International Graduate Program of Molecular Science and Technology National Taiwan University Academia Sinica Taiwan Department of Materials Science and Engineering National Taiwan University Taiwan Molecular Science and Technology Program Taiwan International Graduate Program Academia Sinica Taiwan Department of Photonics National Yang Ming Chiao Tung University Taiwan Center of Atomic Initiative for New Materials National Taiwan University Taiwan

来源：评论

学校读者我要写书评

暂无评论

Localization of a Crack in Moving Cylindrical Ferromagnetic Rods by Measuring the Fourier Coefficients of the Leakage Magnetic Flux

Localization of a Crack in Moving Cylindrical Ferromagnetic ...

引用

Magnetic Conference - Short Papers (INTERMAG Short Papers), IEEE International

作者： Kanta Shiku Masafumi Kuromizu Yuji Gotoh Takaaki Nara Graduate School of Information Science and Technology The University of Tokyo bunkyo-ku Japan Division of Materials Science and Production Engineering Graduate School of Engineering Oita University Oita Japan Intelligent Mechanical Systems Program Faculty of Science and Technology Oita University Oita Japan

ISBN: (数字)9798350362213

ISBN: (纸本)9798350362220

Electromagnetic nondestructive inspection for high-speed moving ferromagnetic materials is necessary for manufacturing efficiency. In this paper, we present a novel leakage magnetic flux (LMF) method to estimate the crack position in a moving cylindrical ferromagnetic rod. The method directly measures the first-order Fourier coefficients of the LMF moving with the crack by using only two coils with DC excitation. The location of a crack is estimated by the proposed method, as demonstrated for an S45C cylindrical rod.

关键词： Location awareness Coils Magnetic flux Inspection Ferromagnetic materials Manufacturing Electromagnetics

来源：评论

学校读者我要写书评

暂无评论

Effect of Cu addition on electrochemical activity of ribbons of Mg-Al-Ca anode materials for magnesium rechargeable batteries manufactured by rapid solidification method

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2024年第1期74卷 14-17页

作者： Fukui, Shunsaku Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama Japan CHUETSU METAL WORKS CO. LTD. Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Kawaguchi Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

The potential for magnesium storage batteries to become the next generation of rechargeable batteries is high. This is largely due to the abundance of magnesium metal resources and their high safety and electric capacity per volume. Our research team has been studying magnesium alloys as anode materials for these batteries. Specifically, we have been investigating the electrochemical activity and mechanism of adding copper to Mg-9mass%Al and Mg-9mass%Al-3mass%Ca. Our findings indicate that the electrochemical activity increased with the addition of 1mass%Cu, but decreased with the addition of 3mass%Cu. In addition, changes in lattice constant and basal orientation were also observed. These changes decreased with 1mass%Cu and increased with 3mass%Cu. SEM observations showed that the cell delimitation was indistinct for the 1%Cu addition. © 2024 The Japan Institute of Light Metals.

关键词： Secondary batteries

来源：评论

学校读者我要写书评

暂无评论

Biomass-Based Discrete Furan Oligomers as materials for Electrochromic Devices

引用

ACS Sustainable Chemistry and Engineering 2024年第1期12卷 459-469页

作者： Atayde, Eduardo C. Fong, Guan-Lun Yeh, Jyun-Yi Matsagar, Babasaheb M. Wang, Yu-Cheng Chen, De-Chian Peng, Chi-How Li, Yi-Pei Yamauchi, Yusuke Ho, Kuo-Chuan Wu, Kevin C.-W. Molecular Science and Technology Program Taiwan International Graduate Program (TIGP-MST) Academia Sinica No. 128 Sec. 2 Academia Road Taipei 11529 Taiwan Department of Chemistry National Tsing Hua University No. 101 Sec. 2 Kuang-Fu Road Hsinchu 30013 Taiwan Department of Chemical Engineering National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei 10617 Taiwan Sustainable Chemical Science and Technology Program Taiwan International Graduate Program (TIGP-SCST) Academia Sinica No. 128 Sec. 2 Academia Road Taipei 11529 Taiwan School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology (AIBN) The University of Queensl Brisbane 4072 QLD Australia Department of Materials Process Engineering Graduate School of Engineering Nagoya University Nagoya 464-8603 Japan Institute of Polymer Science and Engineering National Taiwan University No.1 Sec. 4 Roosevelt Rd. Taipei 10617 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University No. 135 Yuandong Rd. Taoyuan 320 Taiwan

Electrochromic devices (ECDs) are materials that can undergo reversible changes in transmittance when exposed to different applied potentials. While many conjugated heterocyclic oligomers, such as oligothiophenes, have been developed for this purpose, there is no reported study on the use of discrete oligomeric furans as ECD materials. In this work, we introduce a furan trimer that can be utilized as a discrete electrochromic material, which transitions from light yellow to red and has a very high coloration efficiency of 1940 cm²/C at 507 nm. We propose that the reversible π-stack formation of the oligomer radical cations is behind this phenomenon, as evidenced by both experimental and computational results. The derivability of this oligomer from biomass and its facile synthesis make it an interesting alternative for other existing organic electrochromic materials. © 2023 American Chemical Society

关键词： electrochromism furan oligomer hydroxyalkylation−alkylation reaction solvatochromism π-stacks

来源：评论

学校读者我要写书评

暂无评论

Improvement of corrosion resistance and heat dissipation of Mg-6%Al-4%Ca alloy by the addition of Mn, Mm, and the surface treatment

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2023年第12期73卷 646-650页

作者： Ito, Mizuki Kondo, Natsuki Kirimoto, Yuichi Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan School of Sustainable Design Materials and Engineering University of Toyama Toyama Toyama-shi Japan Department of Nano and Functional Material Science Graduate School of Science and Engineering for Education University of Toyama Toyama Toyama-shi Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama Toyama-shi Japan CHUETSU METAL WORKS CO LTD.. Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Toyama Imizu-shi Japan

With the recent digitization, electronic equipment housings are required to be thin-walled and have rigidity, heat dissipation, corrosion resistance, and electromagnetic shielding properties. Magnesium alloys are promising materials that satisfy these requirements. Mg-Al alloys have good castability and high strength, but their thermal conductivity decreases. In general, adding alloying elements to magnesium decreases thermal conductivity the effect of aluminum addition is significant. It was found that adding calcium to Mg-Al alloys to form Mg-Al-Ca (AX) alloys results in higher thermal conductivity than that of Mg-Al alloys. However, AX alloys have poor corrosion resistance and require post-treatment such as surface treatment. In this study, AX64, which has high thermal conductivity among the AX series alloys, was used as the basic composition, and corrosion resistance was improved by adding manganese and misch metal, and an attempt was made to improve corrosion resistance and emissivity through surface treatment. The change in thermal conductivity by heat treatment was also investigated. Experimental results showed that the addition of manganese and misch metal improved corrosion resistance and thermal conductivity. Plasma anodization also improved corrosion resistance and emissivity. Heat treatment of these alloys at 400°C improved the thermal conductivity with longer holding time. © 2023 The Japan Institute of Light Metals.

关键词： Corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

Recent advances in electronic devices for monitoring and modulation of brain

引用

Nano Research 2021年第9期14卷 3070-3095页

作者： Yong Won Kwon Yoon Sun Jun Young-Geun Park Jiuk Jang Jang-Ung Park Nano Science Technology Institute Department of Materials Science and EngineeringYonsei UniversitySeoul 03722Republic of Korea Center for Nanomedicine Institute for Basic Science(IBS)Seoul 03722Republic of Korea Graduate Program of Nano Biomedical Engineering(NanoBME) Advanced Science InstituteYonsei UniversitySeoul 03722Republic of Korea

The brain is actuated by billions of neurons with trillions of interconnections that regulate human *** the mechanisms of these systems that induce sensory reactions and respond to disease remains one of the greatest challenges in science,engineering,and *** advances in nanomaterials and nanotechnologies have led to the extensive research of electronic devices for brain interfaces to better understand the neural activities of the brains complex nervous *** development of sensor devices for monitoring the physiological signals of the brain related to traumatic injury status has accompanied by the progress of electronic neural probes in *** addition,these neurological and stereotactic surgical revolutions hold immense potential for clinical analysis of pharmacological systems within cerebral ***,we review the progress of electronic devices interfacing with brain in terms of the materials,fabrication technologies,and device *** activity can be measured and modulated by brain probes based on newly developed nanofabrication ***,in vivo pathological monitoring of the brain and pharmacological assessment has been developed in miniaturized and wireless *** also consider the key challenges and prospects for further development,and explore the future directions emerging in the latest research.

关键词： neural interfaces neural recording neuromodulation intracranial pressure monitoring microfluidic drug delivery

来源：评论

学校读者我要写书评

暂无评论

Rational effect of CuSe2phase with octadecyl amine modified reduced graphene composite for dual-mode sensing of environmental hazardous anthelminthic drug in aquatic and biological samples

引用

Journal of Environmental Chemical Engineering 2023年第1期11卷

作者： Hwa, Kuo-Yuan Ganguly, Anindita Santhan, Aravindan Department of Molecular Science and Engineering National Taipei University of Technology Taipei Taiwan International Graduate Program in Energy and Optoelectronic Materials National Taipei University of Technology Taipei Taiwan

The increasing usage of antihelminthic drug mebendazole (MEB) in humans and livestock poses serious threat and is considered a significant environmental pollutant. Hence, monitoring the MEB residues in environmental samples, and human fluids is essential to decrease the ecological risk and improve the health of humans. In this work, copper selenide (CuSe2) nano/microspheres were hydrothermally synthesized and ultrasonically treated with rGO surface modified with ODA alkyl amine (rGO-ODA). The optical, structural, morphological, and functional analysis were performed which revealed the CuSe2 in marcasite phase, orthorhombic pattern with Pnnm space group, and substantial composite formation. The morphological studies revealed sphere structure of the CuSe2 and wrinkled sheets of rGO-ODA. A sensor that detects MEB using the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and UV-Vis absorbance techniques was developed. For DPV analysis, the sensor exhibited a very low value for limit of detection 13.55 nM and a sensitivity of 9.4871 μA M-1cm-2. For UV-Vis, the sensor demonstrated a very low limit of detection 22.3 nM. The use of this sensor was validated in real-time analysis with aquatic and biological real samples. The results suggested > 90% of analyte recovery and enhanced efficiency for MEB detection with a potential for commercialization in future. © 2022 Elsevier Ltd.

关键词： Copper compounds

来源：评论

学校读者我要写书评

暂无评论

Impact of Morphological and Structural Properties of Submicron Core-Shell Fe-Silica Particles on High-Current Power Converter Performance in Electronics

引用

ACS Omega 2025年第22期10卷 23387-23396页

作者： Ratnasari, Delyana Septiani, Eka Lutfi Nandiyanto, Asep Bayu Dani Cao, Kiet Le Anh Hirano, Tomoyuki Okuda, Nobuhiro Matsumoto, Hiroyuki Ogi, Takashi Chemical Engineering Program Department of Advanced Science and Engineering Graduate School of Advanced Science and Engineering Hiroshima University 1-4-1 Kagamiyama Hiroshima Higashi-Hiroshima 739-8527 Japan Program Studi Teknik Kimia Fakultas Pendidikan Matematika dan Ilmu Pengetahuan Alam Universitas Pendidikan Indonesia Jl. Setiabudhi No. 229 West Java Bandung 40154 Indonesia Materials Research Center Technology & Intellectual Property HQ TDK Corporation 570-2 Matsugashita Minami-Hadori Chiba Narita 286-8588 Japan

As the demand for energy-efficient solutions grows in industries such as electric vehicles and renewable energy systems, the need for high-current power converters, powder core inductors, has become increasingly critical. These converters are essential for managing the flow of energy while maintaining efficiency under demanding conditions. However, achieving the necessary performance, particularly in terms of energy storage and minimizing energy losses, requires advanced materials with tailored magnetic properties. This study addresses these needs by introducing a novel class of magnetic materials, i.e., submicrometer-sized silica-coated iron (Fe@SiO₂) particles. These particles are produced through a one-step aerosol process, enabling precise control over particle morphology, size, and structural characteristics. The tuned Fe@SiO₂ particles demonstrated improved packing density and saturation current as well as reduced eddy current losses, significantly boosting the stability and efficiency of power converters to meet the demands of modern high-current electronic systems. This research highlights the importance of advanced magnetic materials in the ongoing evolution of power electronics, offering new possibilities for more efficient and reliable power conversion systems in a range of applied electronic technologies. © 2025 The Authors. Published by American Chemical Society.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：