检索结果-内蒙古大学图书馆

U. S. NAVAL ACADEMY'S NEW YARD PATROL CRAFT: FROM CONCEPT TO DELIVERY.

Naval Engineers Journal 1987年第1期99卷 37-58页

作者： Compton, Roger H. Chatterton, Howard A. Hatchell, Gordon McGrath, Frank K. Roger H:. Compton is a Webb graduate who since 1966 has been a part of the naval architecture faculty at the U.S. Naval Academy. Since accepting the appointment to the Academy he has been instrumental in establishing the ABET accredited major program in naval architecture in the conceptual design and operation of the Naval Academy Hydromechanics Laboratory and in the conceptual design of the 108-ft yard patrol craft. Besides his Naval Academy involvement he serves as an adjunct professor with Virginia Polytechnic Institute in its NAVSEA Institute graduate program at Crystal City. He is an active member of both ASNE and SNAME and has published technical papers with both societies. Howard A. Chatterton:began his career as a Navy coop student at the Boston Naval Shipyard in 1960. He received his bachelor's degree in naval architecture and marine engineering from Massachusetts Institute of Technology in 1966 and his master's degree in 1968. He was employed by the Preliminary Design Division of BuShips in the submarine design and hydrofoil design groups until 1972 when he joined the Coast Guard's Naval Engineering Division. He remained with the Design Branch until 1981 when he accepted a faculty position at the U.S. Naval Academy as the research director for the Academy's hydromechanics laboratory. He has recently returned to Coast Guard Headquarters as the assistant chief Naval Architecture Branch Office of Merchant Marine Safety. Gordon Hatchell:is a naval architect at the Naval Sea Combat Systems Engineering Station Norfolk Virginia in the Combatant Craft Engineering Department. He served as lead-ship YP project engineer from its inception to delivery and continues to serve as project coordinator on follow-up ship procurements. He has worked on other boat procurements as well as serving as weight and stability coordinator. Mr. Hatchell began his engineering career in the Design Division at the Norfolk Naval Shipyard in Portsmouth Virginia after receiving a BS in civil engineering from Virginia Polytec

The design of the new 108-ft yard patrol craft (YPs) for the U. S. Naval Academy is described from its beginnings as a senior midshipman design project, through its preliminary and contract design development at the U. S. Navy's small craft design team headquarters, Naval Sea Combat Systems engineering Station, Norfolk, Virginia (NAVSEACOMBAT-SYSENGSTA-Norfolk). During preliminary and contract design the Naval Academy Hydromechanics Laboratory (NAHL) provided experimental data to support NAVSEA-COMBATSYSENGSTA-Norfolk's design analyses in powering, seakeeping, and maneuvering. Several tradeoff studies of interest to patrol craft designers are presented. Major events in the detail design and construction of the first boat are described from both the designer's and the shipbuilder's points of view. The launching, builder's and sea trials of the first boat are described.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

DEVELOPMENT OF A COMBINED ULTRAFILTRATION AND CARBON ADSORPTION SYSTEM FOR INDUSTRIAL WASTE-WATER REUSE AND PRIORITY POLLUTANT REMOVAL

引用

ENVIRONMENTAL PROGRESS 1986年第3期5卷 167-170页

作者： VANGILS, G PIRBAZARI, M Aratex Services Inc. 16001 Ventura Blvd. Encino CA Gerard J. Van Gils:is Director of Environmental and Mechanical Engineering at Aratex Services division of ARA Services in Encino California. He is currently working towards his doctorate at the Environmental Engineering Program Department of Civil Engineering University of Southern California. Massoud Pirbazari:is Assistant Professor at the Environmental Engineering Program Department of Civil Engineering University of Southern California in Los Angeles. His research has focused on the physical/chemical/biological processes for the removal of toxic materials from water and wastewater.

This article describes a work-in-progress. The development work described herein has culminated in the construction of a full-scale treatment system which is currently in operation and is being optimized in both its p... 详细信息

关键词： WASTEWATER

来源：评论

学校读者我要写书评

暂无评论

SHIPBOARD STOWAGE OF FLAMMABLE AND COMBUSTIBLE LIQUIDS

引用

NAVAL ENGINEERS JOURNAL 1986年第3期98卷 199-208页

作者： DROPIK, MV graduated from the University of Detroit in 1969 with a bachelor of science degree in mechanical engineering. He began his Navy career that year with the Naval Ship Systems Command PMS-382 Ship Acquisition Manager for Mine Patrol and Yardcraft. In 1971 he transferred to the General Arrangements and Habitability Design Branch of the Naval Ship Engineering Center. From 1971–1972 he attended graduate school at the University of California at Berkeley through the Navy's long-term training program and received his master's degree in industrial engineering. He currently heads the Auxiliary/Amphibious/Minecraft/Special Projects Branch of NAVSEA's Arrangements Design Division. His duties in this capacity include those of program manager of the U.S. Navy's flammable liquids program a position which he has held for the last eight years. His experience encompasses the general arrangements habitability storeroom and office design of aviation auxiliary amphibious mine warfare and high performance ships and craft.

The uncontrolled proliferation of flammables and combustibles aboard ship, in addition to posing an obvious fire and explosive hazard, has seriously degraded the survivability and increased the vulnerability characteristics of U.S. Navy surface ships. This problem for the most part has been superficially attributed to a widespread shortage of flammable and combustible stowage capacity. As a result, current solutions have been limited to increasing stowage capacity through additional storerooms and development of more efficient stowage aids. Unfortunately, these solutions simply address the symptoms, are of a corrective nature, and do not eliminate the fundamental causes of the problem. The paper conducts a more systematic and comprehensive investigation into identifying and resolving the flammable liquids problem by considering it from a ship life cycle perspective. In this way, the problem is shown to be the resultant accumulation of a number of causes which occur during a ship's design, construction, and operational phases, and which collectively manifest themselves as a major shortage of flammable and combustible liquid stowage space aboard current fleet ships. Actions are then formulated to eliminate or counteract these fundamental causes, and validated by application to a hypothetical case study.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

WARSHIPS AND COST CONSTRAINTS

引用

NAVAL ENGINEERS JOURNAL 1986年第2期98卷 41-52页

作者： HOPE, JP STORTZ, VE Jan Paul Hope a native of Northern Virginia received his bachelor of science degree in mechanical engineering from the University of Virginia in 1969. Upon graduation he began his career in the Department of the Navy with the Naval Ship Systems Command in the acquisition of patrol craft mine sweepers and submarine rescue ships. In January 1971 he transferred to the ship arrangements branch of the Naval Ship Engineering Center. He was selected for the long-term training program at George Washington University in 1974 and completed the program in February 1976 with the degree of master of engineering administration. While at the Naval Ship Engineering Center Mr. Hope was general arrangement task leader on the AO-177 CG-47 CSGN CSGN (VSTOL) CGN-9 (Aegis) and CGN-42 and he also assisted in the landmark Naval Sea Systems Command civilian professional community study. In 1978 he was selected as acting head of the damage control section and subsequently was selected as acting head of the surface ship hydrodynamic section. In February 1980 he was promoted to head of the surface combatant arrangements design section. Mr. Hope was selected for the first class of the NA VSEA commander's development program. While on the program he served in the DDGX combat systems engineering division and the DDGX project office of NA VSEA was the assistant director for ship design in the office of the Assistant Secretary of the Navy for shipbuilding and logistics and was the director of weight engineering and the director of systems engineering for the DDG-51 project in NA VSEA. Upon completion of the program Mr. Hope was assigned as the deputy director of the boiler engineering division to create a new division as a major fleet support initiative by NA VSEA. In June 1985 he joined the staff of the Assistant Secretary of the Navy for shipbuilding and logistics. Mr. Hope was presented the Department of the Navy meritorious civilian service medal in June 1983 for his service with the Office of the Assistant Secretary of the

This paper discusses the need and processes for designing warships to meet cost constraints and for managing warship acquisition programs during the design phase to assure effective adherence to production cost constraints by the design team. The resource control methodology used during the contract design of the Arleigh Burke class destroyer, DDG-51, is examined as a potential model for controlling the cost while maintaining the combat effectiveness of warships. The paper begins with a summary of the basic issue — the relationship among unit cost, unit capability, force level numbers, and force capability — showing recent trends in destroyer costs and force levels. This introduction also includes a discussion of the cost constraint for the DDG-51 in relation to historical trends and ship construction funding allocation. The resource control methodology used to reduce and control costs of the DDG-51 is discussed with a summary of the approach, key concepts and tools, chronology of key events, examples, and results achieved. A number of observations on this methodology are then made which are followed by comments on life cycle costs. The paper concludes with remarks on the future application of the resource control methodology and areas for further work to improve future resource control efforts.

关键词： WARSHIPS

来源：评论

学校读者我要写书评

暂无评论

RACER - A DESIGN FOR MAINTAINABILITY

引用

NAVAL ENGINEERS JOURNAL 1985年第5期97卷 139-146页

作者： DONOVAN, MR MATTSON, WS Michael R. Donovanis a 1974 graduate of the United States Naval Academy where he received his undergraduate degree in naval architecture. In 1975 he received a master of science degree in naval architecture and marine engineering from the Massachusetts Institute of Technology. After completing the Navy's nuclear power training program he served as machinery division officer in USSBainbridge (CGN-25) and chemistry and radiological controls assistant in USSLong Beach (CGN-9). He successfully completed the Navy's surface warfare officer qualification and passed the nuclear engineer's examination administered by Naval Reactors. He was then assigned to the Ship Design and Engineering Directorate (SEA-05) Naval Sea Systems Command as head systems engineer on the DDG-51 ship design project where he received the Navy Commendation Medal for outstanding performance. He is currently with Solar Turbines Incorporated as manager ship integration and integrated logistic support for the Rankine cycle energy recovery (RACER) system. Mr. Donovan has lectured at Virginia Polytechnic Institute teaching marine engineering and has given presentations on ship design at various symposiums and section meetings for both ASNE and SNAME. He has been a member of ASNE and SNAME since 1972 and is registered as a professional engineer in California and Virginia. Wayne S. Mattsonreceived his B.S. degree in mechanical engineering from Western New England College in 1972. Following graduation he attended Naval Officer Candidate School and was subsequently assigned as a project officer to COMOPTEVFOR where he was responsible for technical and operational test plans their execution and final equipment appraisal. Following a tour as engineering officer aboard the USSNespelen (AOG-55) he was assigned as commissioning MPA aboard the USSElliot (DD-967) the fifthSpruanceclass destroyer. For the past six years he has been employed by Solar Turbines Incorporated in program management within the advanced development department. He is currently

There is a great deal of emphasis currently in the Navy on the issues of reliability and maintainability. If a system or component is out of commission, it obviously cannot perform its mission. Thus, systems and components must be reliable, with low failure rates, and maintainable, with short repair times when the system does become inoperable. To be effective, these attributes must be incorporated into new ship systems early in the design stage. The Rankine cycle energy recovery (RACER) system is a heat recovery steam cycle designed to recover energy from the exhaust of an LM2500 gas turbine for augmentation of a ship's propulsion system. The RACER system provides several advantages to a gas turbine powered ship, one of which is improved fuel efficiency for significant annual fuel savings. This saving does not come free, however, since, in general, any additional system installed in the ship will have some maintenance requirements. In keeping with the Navy's current emphasis, a key philosophy in the design of the RACER system has been to minimize this maintenance burden. After a brief description of the RACER system and its design philosophy, the techniques being used during the design phase to minimize the maintenance burden on the fleet are presented. Trade-off studies concerning acquisition versus life-cycle costs, including fuel and maintenance costs, are discussed. Innovations incorporated into this state-of-the-art system are reviewed with an emphasis on design for affordability.

关键词： COGENERATION PLANTS

来源：评论

学校读者我要写书评

暂无评论

AIR-CUSHION LANDING CRAFT NAVIGATION

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

FUTURE PROPULSION MACHINERY TECHNOLOGY FOR GAS-TURBINE POWERED FRIGATES, DESTROYERS, AND CRUISERS

引用

NAVAL ENGINEERS JOURNAL 1984年第2期96卷 34-46页

作者： BASKERVILLE, JE QUANDT, ER DONOVAN, MR USN The Authors Commander James E. Baskerville USNis presently assigned to Naval Sea Systems Command (NA VSEA) as the Ship Design Manager for the DDG 51 the Navy's next generation surface combatant. A graduate of the U.S. Naval Academy Class of 1969 he is a qualified Surface Warfare Officer and designated Engineering Duty Officer (ED). He received his M.S. degree in Mechanical Engineering and his professional degree of Ocean Engineer from the Massachusetts Institute of Technology (MIT) and holds a patent right on an Electronic Control and Response System. His naval assignments include tours in USSRamsey (FFG-2) Aide and Flag Lieutenant to the Commander Naval Electronic Systems Command and Ship Superintendent Surface Type Desk Officer and Assistant Design Superintendent at NA VSHIPYD Pearl Harbor. He was awarded the Meritorious Service Medal for distinguished performance at Pearl Harbor Naval Shipyard. As an author he has contributed articles to the ASNEJournaland given presentations at local sections on ship design the use of innovative technology in ship repair and maintenance and the costs and risks associated with engineering progress. Commander Baskerville is a registered Professional Engineer in the State of Virginia an adjunct professor teaching marine engineering at Virginia Tech. and in addition to ASNE which he joined in 1975 is a member of SNAME Tau Beta Pi Sigma Xi ASME and the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE). Dr. Earl R. Quandt:received his degree of Chemical Engineer from the University of Cincinnati in 1956 and his Ph.D. degree in Chemical Engineering from the University of Pittsburgh in 1961. He worked in the naval reactors program at the Bettis Atomic Power Laboratory from 1956 to 1963. Since that time he has been with David Taylor Naval Ship Research and Development Center Annapolis Maryland where he is Head of the Power Systems Division. He contributed to this paper while on a one year assignment to the U.S. Naval Academy as V

A turning point occurred in naval engineering in 1972 when the U.S. N avy chose to use marine gas turbines for the propulsion of its new SPRUANCE and PERRY Class ships. This paper reviews the more than twenty years of experience with turbine technology and its design integration into combat ships needed to make that decision. It is concluded that the availability of a good second generation aircraft derivative engine with proven reliability and a strong commercial base, i.e., the LM-2500, was as important to the decision as was the predicted improved ship effectiveness and cost benefits. This paper discusses improvements that can be made to the twin engine, single gear, single propeller shaft system. Focusing only on this mechanical transmission concept, it addresses the impact of possible improvements to the engine, gear, and shafting. In particular, the paper discusses current LM-2500 related R&D efforts to: (a) obtain improved part-power fuel rates, (b) integrate with a reversing reduction gear, and (c) add on a waste heat recovery steam cycle. Looking ahead to the year 2000, this paper suggests that a successor to the ubiquitous LM-2500 will appear in the 15 MW power range to provide the next step in the evolution of the twin engine package. This new naval engine will most likely be based on an aircraft core that exists at present, such that it will have demonstrated its reliability and commercial potential through many hours of testing prior to its mid-1990 marine conversion. This new engine is expected to offer improved air flow, an excellent fuel rate (approaching a flat 0.30 LB/HP-HR), and effective maintenance monitoring, all at some expense in size, weight, and cost. The year 2000 engine will burn a liquid hydrocarbon fuel similar to JP-5 because of its aircraft origins. Combined with advances in gear and shafting technology, the full twin engine propulsion system of the year 2000 should be markedly lighter, smaller, and more efficient than today's units.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A COMPUTER-MODEL FOR SHIPBOARD ENERGY ANALYSIS

引用

NAVAL ENGINEERS JOURNAL 1984年第5期96卷 33-45页

作者： DETOLLA, JP FLEMING, JR Joseph DeTolla:is a ship systems engineer in the Ship Systems Engineering Division SEA 56D5 at the Naval Sea Systems Command. His career with the Navy started in 1965 at the Philadelphia Naval Shipyard Design Division. In 1971 he transferred to the Naval Ship Engineering Center. He has held positions as a fluid systems design engineer and auxiliary systems design integration engineer. Mr. DeTolla has worked extensively in the synthesis and analysis of total energy systems notably the design development of the FFG-7 class waste heat recovery system. He is NA VSEA's machinery group computer supported design project coordinator and is managing the development of a machinery systems data base load forecasting algorithms and design analysis computer programs. Mr. DeTolla has a bachelor of science degree in mechanical engineering from Drexel University and a master of engineering administration degree from George Washington University. He is a registered professional engineer in the District of Columbia and has written several technical papers on waste heat recovery and energy conservation. Jeffrey Fleming:is a senior project engineer in the Energy R&D Office at the David Taylor Naval Ship R&D Center. In his current position as group leader for the future fleet energy conservation portion of the Navy's energy R&D program he is responsible for the identification and development of advanced components and subsystems which will lead to reductions in the fossil fuel consumption of future ships. Over the past several years he has also directed the development and application of total energy computer analysis techniques for the assessment of conventional and advanced shipboard machinery concepts. Mr. Fleming is a 1971 graduate electrical engineer of Virginia Polytechnic Institute and received his MS in electrical engineering from Johns Hopkins University in 1975. Mr. Fleming has authored various technical publications and was the recipient of the Severn Technical Society's “Best Technical Paper of the Year” award in 1

In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and Development Center (DTNSRDC) to analyze the performance of shipboard energy systems for applications other than nuclear or oil-fired steam propulsion plants. This paper discusses the applications and utility of this computer program as a performance analysis tool for design of ship machinery systems. The program is a simulation model that performs a complete thermodynamic analysis of a user-specified energy system. It offers considerable flexibility in analyzing a variety of propulsion, electrical, and auxiliary plant configurations through a component building block structure. Component subroutines that model the performance of shipboard equipment such as engines, boilers, generators, and compressors are available from the program library. Component subroutines are selected and linked in the program to model the desired machinery plant functional configurations. The operation of the defined shipboard energy system may then be simulated over a user-specified scenario of temperature, time, and load profiles. The program output furnishes information on component operating characteristics and fuel demands, which allows evaluation of the total system performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form Design System (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Segregation to interphase boundaries in liquid-phase sintered tungsten alloys

引用

Metallurgical Transactions A 1983年第3期14卷 667-677页

作者： Lea, C. Muddle, B. C. Edmonds, D. V. Division of Materials Applications National Physical Laboratory Teddington United Kingdom Department of Mechanical and Industrial Engineering University of Illinois at Urbana Department of Metallurgy and Science of Materials University of Oxford United Kingdom

Scanning Auger electron spectroscopy has been used to examine the distribution of impurity elements on the fracture surfaces of liquid-phase sintered W-Ni-Cu and W-Ni-Fe alloys. On the interphase boundaries between the fcc Ni-based matrix phase and the tungsten particles, segregation levels of ~0.4 and ~0.2 monolayers of phosphorus have been observed in as-sintered, furnace-cooled specimens of W-Ni-Cu and W-Ni-Fe, respectively. The phosphorus is homogeneously distributed but at fracture adheres preferentially to the matrix phase. High temperature heat treatment (1350 °C) followed by water quenching reduces significantly the phosphorus segregation and improves the degree of cohesion across these boundaries. Segregated sulfur is detected on both sides of the interphase boundaries after fracture. The sulfur is much less uniformly distributed than the phosphorus, and its segregation level increases in the heat treated specimens. Copper also segregates to the interphase boundaries during the heat treatment of W-Ni-Cu specimens, but no equivalent segregation of iron was observed in the W-Ni-Fe system. The boundaries developed between adjacent tungsten particles are free of impurity contamination in both alloy systems but have a segregated layer of nickel.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：