检索结果-内蒙古大学图书馆

Joint 13th International Conference on Soft Computing and Intelligent Systems and 25th International Symposium on Advanced Intelligent Systems, SCIS and ISIS 2024

作者： Imahori, Shinji Karuno, Yoshiyuki Ueda, Yuma Chuo University Faculty of Science and Engineering Tokyo Japan Kyoto Institute of Technology Faculty of Mechanical Engineering Kyoto Japan Graduate School of Science and Technology Kyoto Institute of Technology Mechanodesign Program Kyoto Japan

ISBN: (纸本)9798350373332

The line balancing has been an important production strategy which aims at redressing the balance of workloads on machines in an assembly type of production system. In this paper, a lexicographic bi-criteria optimization model of the line balancing is revisited for a mass-production of one homogeneous product. A sequence of machines and a totally ordered set of tasks are given. The machines are considered to be situated along with a production line, according to their sequence. Precedence relations between tasks are specified by the total order of tasks. The task set also consists of a given number of disjoint subsets, namely categories such that tasks in a category are considered to constitute a certain kind of family of technical skills. Each task has a positive processing time and a category index. A solution to the problem is expressed by an assignment of tasks to machines, and for the feasibility of a solution, the assignment must obey the totally ordered precedence constraint on tasks. The sum of processing times of tasks assigned to a machine in a feasible solution is the load of the machine, and the number of category indexes of tasks assigned to a machine is referred to as the degree of diverseness of the task subset. The primary objective of the problem is to minimize the maximum machine load, and the second objective is to minimize the maximum degree of diverseness of tasks assigned to a machine. The lexicographic bi-criteria line balancing problem with totally ordered precedence constraints has been known to admit a polynomial time exact algorithm, whose time complexity is linear in the number of machines and squared in the number of tasks. In this paper, a faster polynomial time exact algorithm is proposed, which improves the time complexity to be squared in the number of tasks. © 2024 IEEE.

关键词： Polynomial approximation

来源：评论

学校读者我要写书评

暂无评论

Dissipative flow features of Carreau nanofluid with thermal radiation inside plane wall channel:Jeffery-Hamel analysis

引用

Propulsion and Power Research 2023年第2期12卷 253-272页

作者： Sohail Rehman Hashim Fuad A.MAl-Yarimi Sultan Alqahtani Mohammed Awade Department Mechanical Engineering School of Material Sciences and EngineeringGeorgia Institute of TechnologyAtlantaGAUSA Department of Mathematics and Statistics University of HaripurHaripur 22620Pakistan Department of Computer Science King Khalid UniversityMuhayel AseerSaudi Arabia College of Engineering Mechanical Engineering DepartmentKing Khalid UniversityAbhaSaudi Arabia Department of Information Systems King Khalid UniversityMuhayel AseerSaudi Arabia

The current article communicates a numerical investigation on laminar flow of dissipative generalized Newtonian Carreau nanofluid flowing through vertical conduit with converging and diverging plane *** and concentration characteristics due to enthalpy change,activation energy,and non-linear thermal radiation have been examined in the presence of buoyancy *** channel walls for both temperature and volumetric fraction are assumed to be *** instability mechanism of nanofluids is reported using a two-phase nanofluid model,which works reasonably well for nanoparticle concentrations below a certain threshold.A Jeffery-Hamel(J-H)flow model is developed by assuming an incompressible purely radial flow of Carreau nanofluids with heat and mass *** the suitable non-dimensional variables,the resulting nonlinear partial differential equations are turned into a system of ordinary differential *** modified governing equations are then numerically solved using the built-in boundary value problem solver bvp4c,on the template form of commercial software *** impacts of material,geometrical and thermophysical parameters governing the J-H problem are discussed and *** indicate that higher buoyance forces incline the velocity profiles in converging enclosure,while a slight reduction is perceived in opposing forces.A significant decrease of wall heat transmission is reflected for larger values of activation energy and radiation *** endorsing this communication,a comparison analysis is established with existing research and noticed a remarkable ***,the flow inside converging and diverging channels are deployed in nuclear reactors that use plate-type nuclear energies,high heat-flux condensed heat exchangers,high-performance micro-electronic cooling systems,jets,rockets nozzles,and jet propulsion inlet.

关键词： Nanofluids Buoyancy forces Converging/diverging channels Thermal radiation Activation energy Carreau fluid

来源：评论

学校读者我要写书评

暂无评论

Balancing Magnetic and mechanical Properties of Non-oriented Electrical Steel:Correlation Between Microstructure and Properties

引用

Acta Metallurgica Sinica(English Letters) 2024年第12期37卷 2136-2149页

作者： Zhaoyang Cheng Jing Liu Chunlei Yu Bolin Zhong Shenglin Chen Bing Fu Soran Birosca The State Key Laboratory of Refractories and Metallurgy Wuhan University of Science and TechnologyWuhan430081China Guangdong Provincial Key Laboratory of New Energy Materials Service Safety College of Material Science and EngineeringShenzhen UniversityShenzhen518060China Hubei Engineering Technology Research Center of Marine Materials and Service Safety Wuhan University of Science and TechnologyWuhan430081China The R&D Center of Wuhan Iron and Steel Co. Ltd.Wuhan430080China School of Mechanical and Design Engineering in the Faculty of Technology University of PortsmouthPortsmouthPO13DJUK

High performance e-motors require a continuous enhancement of physical and mechanical properties for non-oriented electrical steel(NOES).However,the optimization of mechanical and magnetic properties simultaneously during NOES processing is extremely challenging where both properties directly influenced by alloy grain size,crystallographic texture,and dislocation *** the current investigation,recrystallization annealing cycles were employed to modify the microstructure with the aim of balance magnetic and mechanical properties of NOES *** results showed that with increasing annealing temperatures,the degree of recrystallization and grain size increased,while the dislocation density reduced considerably at the early stage of ***,the values of texture parameter A*_(overall)(which is a function of overall individual grain orientations and their alignments with easy magnetization directions)were *** was evident that the magnetic properties were significantly improved,however the alloy strength was reduced with increasing annealing ***,the correlation between magnetic properties as well as alloy strength on grain size,texture,and dislocation density were *** crystallographic texture intensity and measured properties quantitative analyses it was concluded that grain size was the predominant factor in balancing the mechanical and magnetic properties of the studied ***,the optimal comprehensive properties(both magnetic and mechanical)were achieved by annealing at 800℃,which yielded a magnetic induction B5000 of 1.616 T,a high-frequency iron loss P_(1.0/400)of 22.43 W/kg,and a yield strength of 527 MPa.

关键词： High strength non-oriented silicon steel Microstructure Texture Magnetic properties mechanical properties

来源：评论

学校读者我要写书评

暂无评论

GeoRefineNet: A Multistage Framework for Enhanced Cephalometric Landmark Detection in CBCT Images Using 3D Geometric Information 17th

GeoRefineNet: A Multistage Framework for Enhanced Cephalome...

引用

17th Asian Conference on Computer Vision, ACCV 2024

作者： Viriyasaranon, Thanaporn Ma, Serie Choi, Jang-Hwan Department of Computational Medicine Graduate Program in System Health Science and Engineering Ewha Womans University Seoul Korea Republic of Division of Mechanical and Biomedical Engineering Graduate Program in System Health Science and Engineering Ewha Womans University Seoul Korea Republic of Department of Artificial Intelligence Ewha Womans University Seoul Korea Republic of

ISBN: (纸本)9789819609000

The precise detection of cephalometric landmarks on two-dimensional (2D) radiographs or three-dimensional (3D) computed tomography (CT) images is a fundamental step in various medical fields, especially in research on orthodontics and maxillofacial surgery. Deep learning-based detectors have demonstrated remarkable accuracy in 2D cephalometric analysis, whereas conventional single-view approaches are limited by their reliance on information from a single perspective. This study proposes GeoRefineNet, a novel multistage framework that leverages information from multiple CT scans acquired at various angles. By incorporating geometric knowledge through a 3D heatmap reconstruction process, GeoRefineNet improves robustness, accuracy, and adaptability to various cephalometric configurations. The proposed framework predicts 3D landmark positions on CT images, effectively addressing challenges associated with high-dimensional input data and limited training examples. GeoRefineNet surpasses the existing state-of-the-art models in the 2D and 3D domains, as demonstrated by its superior performance on numerical and clinical datasets. These findings indicate that GeoRefineNet offers a promising avenue for improving the accuracy and reliability of cephalometric landmark detection fostering further advances in clinical diagnosis and treatment planning. Our code is available at https://***/Thanaporn09/***. © The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2025.

关键词： Computerized tomography

来源：评论

学校读者我要写书评

暂无评论

MXene Enhanced 3D Needled Waste Denim Felt for High‑Performance Flexible Supercapacitors

引用

Nano-Micro Letters 2024年第2期16卷 383-394页

作者： Wei Fan Qi Wang Kai Rong Yang Shi Wanxi Peng Handong Li Zhanhu Guo Ben Bin Xu Hua Hou Hassan Algadi Shengbo Ge Key Laboratory of Functional Textile Material and Product of the Ministry of Education School of Textile Science and EngineeringInstitute of Flexible electronics and Intelligent TextileXi’an Polytechnic UniversityXi’an 710048People’s Republic of China Co‑Innovation Center of Efficient Processing and Utilization of Forest Resources College of Materials Science and EngineeringNanjing Forestry UniversityNanjing 210037People’s Republic of China Henan Province International Collaboration Lab of Forest Resources Utilization School of ForestryHenan Agricultural UniversityZhengzhou 450002People’s Republic of China Integrated Composites Lab Department of Mechanical and Construction EngineeringNorthumbria UniversityNewcastle Upon Tyne NE18STUK College of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024People’s Republic of China Department of Electrical Engineering Faculty of EngineeringNajran University11001 NajranSaudi Arabia

MXene,a transition metal carbide/nitride,has been prominent as an ideal electrochemical active material for ***,the low MXene load limits its practical *** environmental concerns and sustainable development become more widely recognized,it is necessary to explore a greener and cleaner technology to recycle textile by-products such as *** present study proposes an effective 3D fabrication method that uses MXene to fabricate waste denim felt into ultralight and flexible supercapacitors through needling and *** 3D structure provided more sites for loading MXene onto Z-directional fiber bundles,resulting in more efficient ion exchange between the electrolyte and ***,the carbonization process removed the specific adverse groups in MXenes,further improving the specific capacitance,energy density,power density and electrical conductivity of *** electrodes achieve a maximum specific capacitance of 1748.5 mF cm-2 and demonstrate remarkable cycling stability maintaining more than 94%after 15,000 galvanostatic charge/discharge ***,the obtained supercapacitors present a maximum specific capacitance of 577.5 mF cm^(-2),energy density of 80.2μWh cm^(-2)and power density of 3 mW cm^(-2),*** resulting supercapacitors can be used to develop smart wearable power devices such as smartwatches,laying the foundation for a novel strategy of utilizing waste cotton in a high-quality manner.

关键词： MXene 3D needled waste denim felt Supercapacitors Carbonization

来源：评论

学校读者我要写书评

暂无评论

Boosted lithium storage performance by local build-in electric field derived by oxygen vacancies in 3D holey N-doped carbon structure decorated with molybdenum dioxide

引用

Journal of materials science & Technology 2023年第11期142卷 185-195页

作者： Chuanxin Hou Wenyue Yang Hideo Kimura Xiubo Xie Xiaoyu Zhang Xueqin Sun Zhipeng Yu Xiaoyang Yang Yuping Zhang Bin Wang Ben Bin Xu Deepak Sridhar Hassan Algadi Zhanhu Guo Wei Du School of Environmental and Material Engineering Yantai UniversityYantai 264005China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai 264005China Department of Chemical&Biomolecular Engineering University of TennesseeKnoxvilleTN 37996USA College of Materials Science and Engineering Taiyuan University of Science and TechnologyTaiyuan 030024China Mechanical and Construction Engineering Faculty of Engineering and EnvironmentNorthumbria UniversityNewcastle Upon Tyne NE18STUK Zentek Ltd. 24 Corporate CourtGuelphON N1G 5G5Canada Department of Electrical Engineering Faculty of EngineeringNajran UniversityNajran 11001Saudi Arabia Integrated Composites Laboratory(ICL) Mechanical and Construction EngineeringFaculty of Engineering and EnvironmentNorthumbria UniversityNewcastle Upon TyneNE18STUK

Three-dimensional holey nitrogen-doped carbon matrixes decorated with molybdenum dioxide(MoO_(2))nanoparticles have been successfully synthesized via a NaCl-assisted template *** obtained MoO_(2)/C composites offered multi-advantages,including higher specific surface area,more active sites,more ions/electrons transmission channels,and shorter transmission path due to the synergistic effect of the uniformly distributed MoO_(2) nanoparticles and porous carbon ***,the oxygen vacancies were introduced into the prepared composites and enhanced the Li^(+)intercalation/deintercalation process during electrochemical cycling by the Coulomb *** existence of the local built-in electric field was proved by experimental data,differential charge density distribution,and density of states *** uniquely designed structure and introduced oxygen vacancy defects endowed the MoO_(2)/C composites with excellent electrochemical *** view of the synergistic effect of the uniquely designed morphology and introduced oxygen vacancy defects,the MoO_(2)/C composites exhibited superior electrochemical performance of a high capacity of 918.2 mAh g^(-1) at 0.1 A g^(-1) after 130 cycles,562.1 mAh g^(-1) at 1.0 A g^(-1) after 1000 cycles,and a capacity of 181.25 mAh g^(-1) even at 20.0 A g^(-1).This strategy highlights the path to promote the commercial application of MoO_(2)-based and other transition metal oxide electrodes for energy storage devices.

关键词： MoO_(2)/C hybrid 3D holey structure Oxygen vacancies Lithium-ion batteries

来源：评论

学校读者我要写书评

暂无评论

Nanostructured steels for advanced structural applications

引用

materials Futures 2022年第1期1卷 97-100页

作者： H J Kong T Yang T L Zhang B X Cao C T Liu Department of Mechanical Engineering Department of Material Science and EngineeringHong Kong Institute for Advanced StudyCity University of Hong KongHong KongPeople’s Republic of China

This vision summarizes the recent advancement of nanostructured steels foradvanced structural applications, foresees possible challenges and pinpoints futuredirections as well as opportunities in this new era of indus... 详细信息

关键词： nanostructured steels extreme environments advanced manufacturing shape memory

来源：评论

学校读者我要写书评

暂无评论

Investigation of manufacturing conditions of single roll rapidly solidified ribbon for anode materials of magnesium rechargeable batteries

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2023年第11期73卷 537-544页

作者： Kirimoto, Yuichi Fuke, Kousuke Tsukeda, Tadayoshi Aida, Tetsuo Nemoto, Yasunori Ikeda, Minoru Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Department of Nano and Functional Material Science Graduate School of Science and Engineering for Education University of Toyama 3190 Gofuku Toyama-shi-shiToyama Toyama930-8555 Japan Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama Toyama-shi-shiToyama Toyama Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama-shi-shiToyama Toyama Japan FLOW Science JAPAN Shizuoka Hamamatsu-shi Japan CHUETSU METAL WORKS CO. LTD Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Saitama Kawaguchi-shi Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

Magnesium rechargeable batteries are attracting attention as next-generation rechargeable batteries because of their resource abundance, cost, safety, and high electrical capacity per volume compared to conventional lithium-ion rechargeable batteries. Our joint research team focused not only on the electrochemically active magnesium composition of ribbon for the negative electrode materials of magnesium rechargeable batteries but also on the production process, focused on the single roll type liquid quenching and rapid solidification method, which can be produced at a lower cost. In this study, the optimal processing conditions were examined by comparing CAE analysis with ribbon actually manufactured, with the aim of further improving manufacturing conditions using the same method, such as length discontinuities, thickness, and surface properties of ribbon. We specifically various process parameters such as injection pressure and roll peripheral speed for evaluation. As a result, several linear cracks were observed on the surface of the ribbon as the peripheral speed increased and as the Gap became wider, and the surface properties tended to deteriorate. Also, It was found that the dominant factor in the length of the ribbon was the peripheral speed. As the peripheral speed increased, the length of the ribbon tended to increase. © 2023 Japan Institute of Light Metals. All rights reserved.

关键词： Surface properties

来源：评论

学校读者我要写书评

暂无评论

Effect of High-Flow Nasal Cannula on Capnogram Waveform for Studying Non-Invasive Human Ventilation 2

Effect of High-Flow Nasal Cannula on Capnogram Waveform for ...

引用

2nd IEEE National Biomedical engineering Conference, NBEC 2023

作者： Tirta Nindhia, Tjokorda Gde Aqila Mohammed, Nursyasa Jamaludin, Julia Jais Devandran, Pagupathi Angel Bhaswara, Nabiel Rafa Hutajulu, Thalitakum Malarvili, M.B. Udayana University Jimbaran Study Program of Mechanical Engineering Engineering Faculty Bali Indonesia Universiti Teknologi Malaysia School of Biomedical and Health Science Engineering Johor Malaysia

ISBN: (纸本)9798350338546

This study is conducted to compare three different cannulas;all purpose nasal cannula with 2 prongs, nasal pressure cannula with 2 prongs and single port nasal cannula which are commonly used for capnography device. These cannulas or sometimes called as nasal prong is connected to the device via nose of subjects studied. This procedure is a part of respiratory study to monitor lungs condition and breathing pattern. This study involves 47 subject where the exhaled breath was recorded to make comparison and choose the most suitable and effective for capnography waveform analysis. Utilizing Statistical Package for the Social sciences (SPSS) to find the normality of all the nasal cannula data based on capnogram waveform. The result from the analysis shows that the frequency distribution for type 1 nasal cannula which is also known as all-purpose nasal cannula had the feature values closer to the standard value. Our study proofs that all purpose nasal cannula sampling is the most suitable to capture exhaled breath for monitoring respiratory conditions. © 2023 IEEE.

关键词： capnography CO2 monitoring, feature extraction nasal cannula

来源：评论

学校读者我要写书评

暂无评论

Low-velocity Impact Behavior of Sandwich Panels with Different Core Configurations: Numerical Study 50

Low-velocity Impact Behavior of Sandwich Panels with Differe...

引用

50th International Conference on Computers and Industrial engineering: Sustainable Digital Transformation, CIE 2023

作者： Charkaoui, Assil Hassan, Noha M. Bahroun, Zied Material Science and Engineering Program American University of Sharjah Sharjah United Arab Emirates Department of Industrial Engineering American University of Sharjah Sharjah United Arab Emirates

ISBN: (纸本)9781713886952

Sandwich panels with cellular cores are increasingly prominent in several industries like marine, aerospace, and automotive, owing to their exceptional stiffness and strength-toweight ratio. Their adaptability is further enhanced by the ability to tailor properties such as size, volume fraction, and unit cell geometry. This research investigates the response of sandwich panels to low-velocity impacts, focusing on two distinct core designs: rhombic and I-shaped unit cells, each with a core volume fraction of 15%. It also examines how the impact behaviour is influenced by varying the number of unit cells. The study employs finite element analysis using ABAQUS software to determine the energy absorption capacity and plastic strain in these panels. Findings reveal that changes in the unit cell configuration and number of unit cells significantly alter the panels' energy absorption characteristics. This approach of using numerical simulations offers a cost-effective alternative to extensive experimental testing, enabling the evaluation of various topologies and structures. © 2023 Computers and Industrial engineering. All rights reserved.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：