检索结果-内蒙古大学图书馆

第三十三届中国控制会议

作者： WANG ShouGuang LIU Miao ZHOU MengChu WU WenHui IEEE School of Information & Electronic Engineering Zhejiang Gongshang University State Key Laboratory for Manufacturing Systems Engineering Xi’an Jiaotong University School of Electro-Mechanical Engineering Xidian University The Key Laboratory of Embedded System and Service Computing Ministry of EducationTongji University Department of Electrical and Computer Engineering New Jersey Institute of TechnologyNewarkNJ 07102USA

ISBN: (纸本)9781479947249

Petri nets are widely used to model flexible manufacturing systems(FMSs) because they can help analyze the properties and synthesize deadlock-free supervisory controllers of *** system of Simple Sequential Processes with Resources(WS3PR) is an important subclass of Petri nets that can well model many *** work first gives new algorithms to check liveness for a WS3 PR net via its subnet trees and *** the computation complexity for the proposed method is shown in this paper,to be polynomial under certain ***,sufficient conditions for deciding liveness of a WS3 PR are *** example is used to illustrate the results.

关键词： Liveness,flexible manufacturing system,deadlock,Petri net.

来源：评论

学校读者我要写书评

暂无评论

Development of a thin shaped load sensor for bed-leaving prediction for care recipients

Transactions of Japanese Society for Medical and Biological ...

引用

Transactions of Japanese Society for Medical and Biological engineering 2014年 52卷 O-19-O-20页

作者： Endo, Yoshihiro Hosokawa, Sho Fukuda, Katsumi Shimura, Jyo Saito, Hirokazu Advanced Course of Mechanical and Computer System Engineering Tokyo National College of Technology Japan Department of Mechanical Engineering Tokyo National College of Technology Japan

In the hospital and nursing home, it is expected to introduce a bed-leaving sensor system to prevent an accident such as fall from bed and injury by wandering of care recipients. A retailed sensor is able to detect the bed-leaving with small error with the load balance of the bed casters. But its evaluation is no good because care giver felt inconvenience of the shape and weight of the sensor. So, we designed a caster load sensor that is lightweight and thin shaped for improvement of the retailed sensor. The prototyped sensor could obtain the load within 10% of the error and estimate center-gravity of the bed within 38mm of the error. Then, it was confirmed that the estimate center-gravity was corresponded the behavior of a subject position on the bed. Especially, bed-leaving prediction will be possible by detecting change of center-gravity. © 2014, Japan Soc. of Med. Electronics and Biol. engineering. All rights reserved.

关键词：

来源：评论

学校读者我要写书评

暂无评论

International Society for Therapeutic Ultrasound Conference 2016

引用

Journal of Therapeutic Ultrasound 2017年第1期5卷 1-114页

作者： Brian Fowlkes Pejman Ghanouni Narendra Sanghvi Constantin Coussios Paul C. Lyon Michael Gray Christophoros Mannaris Marie de Saint Victor Eleanor Stride Robin Cleveland Robert Carlisle Feng Wu Mark Middleton Fergus Gleeson Jean-Franҫois Aubry Kim Butts Pauly Chrit Moonen Jacob Vortman Shirley Sharabi Dianne Daniels David Last David Guez Yoav Levy Alexander Volovick Javier Grinfeld Itay Rachmilevich Talia Amar Zion Zibly Yael Mardor Sagi Harnof Michael Plaksin Yoni Weissler Shy Shoham Eitan Kimmel Omer Naor Nairouz Farah Dong-Guk Paeng Zhiyuan Xu John Snell Anders H. Quigg Matthew Eames Changzhu Jin Ashli C. Everstine Jason P. Sheehan Beatriz S. Lopes Neal Kassell Thomas Looi Vera Khokhlova Charles Mougenot Kullervo Hynynen James Drake Michael Slayton Richard C. Amodei Keegan Compton Ashley McNelly Daniel Latt John Kearney David Melodelima Aurelien Dupre Yao Chen David Perol Jeremy Vincenot Jean-Yves Chapelon Michel Rivoire Wei Guo Guoxin Ren Guofeng Shen Michael Neidrauer Leonid Zubkov Michael S. Weingarten David J. Margolis Peter A. Lewin Nathan McDannold Jonathan Sutton Natalia Vykhodtseva Margaret Livingstone Thiele Kobus Yong-Zhi Zhang Michael Schwartz Yuexi Huang Nir Lipsman Jennifer Jain Martin Chapman Tejas Sankar Andres Lozano Robert Yeung Christakis Damianou Nikolaos Papadopoulos Omer Brokman Eyal Zadicario Ori Brenner David Castel Shih-Ying Wu Julien Grondin Wenlan Zheng Marc Heidmann Maria Eleni Karakatsani Carlos J. Sierra Sánchez Vincent Ferrera Elisa E. Konofagou Marinos Yiannakou HongSeok Cho Hwayoun Lee Mun Han Jong-Ryul Choi Taekwan Lee Sanghyun Ahn Yongmin Chang Juyoung Park Nicholas Ellens Ari Partanen Keyvan Farahani Raag Airan Alexandre Carpentier Michael Canney Alexandre Vignot Cyril Lafon Jean-yves Delattre Ahmed Idbaih Henrik Odéen Bradley Bolster Eun Kee Jeong Dennis L. Parker Pooja Gaur Xue Feng Samuel Fielden Craig Meyer Beat Werner William Grissom Michael Marx Hans Weber Valentina Taviani Brian Hargreaves Jun Tanaka Kentaro Kikuchi Ayumu Ishijima Takashi Azuma Kosuke Minamihata Satoshi Basic Radiological Sciences Division Department of Radiology University of Michigan Ann Arbor USA Stanford School of Medicine Stanford USA SonaCare Medical Indianapolis USA Institute of Biomedical Engineering University of Oxford Oxford UK HIFU Unit Churchill Hospital Oxford UK Department of Oncology University of Oxford Oxford UK Department of Radiology Churchill Hospital Oxford UK Institut Langevin Paris France Center for Imaging Sciences Imaging Division University Medical Center Utrecht The Netherlands InSighTec Haifa Israel Sheba Medical Center Ramat-Gan Israel Tel-Aviv University Tel-Aviv Israel Faculty of Biomedical Engineering & Russell Berrie Nanotechnology Institute Technion – Israel Institute of Technology Haifa Israel ELSC Center for Brain Sciences Hebrew University Jerusalem Israel Biomedical Engineering Technion- Israel Institute of Technology Haifa Israel Faculty of Life Sciences Bar Ilan University Ramat Gan Israel Focused Ultrasound Foundation Charlottesville USA Ocean System Engineering Jeju National University Jeju Republic of Korea Neurosurgery University of Virginia Charlottesville USA Biology University of Virginia Charlottesville USA Pathology University of Virginia Charlottesville USA Hospital for Sick Children Toronto Canada University of Toronto Toronto Canada University of Washington Seattle USA Philips Healthcare Markham Canada Sunnybrook Research Institute Toronto Canada Guided Therapy Systems LLC Mesa USA School of Medicine University of Arizona Tucson USA The CORE Institute Phoenix USA LabTAU - U1032 INSERM Lyon France Centre Leon Berard Lyon France Department of Oral Maxillofacial and Head Neck Oncology Shanghai 9th People’s Hospital Shanghai China The School of Biomedical Engineering Science and Health Systems Drexel University Philadelphia USA Department of Surgery College of Medicine Drexel University Philadelphia USA Biostatistics and Epidemiology University of Pennsylvania Philadelphi

来源：评论

学校读者我要写书评

暂无评论

Low Temperature Co-fired Ceramic Package for Lab-on-CMOS Applied in Cell Viability Monitoring

引用

Procedia engineering 2015年 120卷 1079-1082页

作者： Niina Halonen Joni Kilpijärvi Maciej Sobocinski Timir Datta-Chaudhuri Antti Hassinen Someshekar B. Prakash Peter Möller Pamela Abshire Elisabeth Smela Sakari Kellokumpu Anita Lloyd Spetz Microelectronics and Materials Physics Laboratories Department of Electrical Engineering P.O. Box 4500 FI-90014 University of Oulu Finland Laboratory for MicroTechnologies Department of Mechanical Engineering and the Institute for Systems Research A. James Clark School of Engineering University of Maryland College Park MD 20742 USA Integrated Biomorphic Information System Laboratory Department of Electrical & Computer Engineering and the Institute for Systems Research University of Maryland College Park MD 20742 USA Faculty of Biochemistry and Molecular Medicine University of Oulu P.O. Box 5400 FI-90014 University of Oulu Finland Advanced Design Organization Intel Corporation Hillsboro USA Division of Applied Sensor Science Department of Physics Chemistry and Biology Linköping University SE-58183 Linköping Sweden

Lab-on-CMOS chips (LOCMOS) are sophisticated miniaturized analysis tools based on integrated circuit (IC) microchips performing various laboratory functions. We have developed a low temperature co-fired ceramic (LTCC) package for a LOCMOS application regarding cytotoxicity assessment of nanomaterials. The LTCC packaged capacitance sensor chip is designed for long-term cell viability monitoring during nanoparticle exposure. The introduced LTCC package utilizes the flip chip bonding technique, and it is biocompatible as well as able to withstand the environmental conditions required to maintain mammalian cell culture directly on the surface of a complementary metal oxide semiconductor (CMOS) integrated circuit.

关键词： Lab-on-CMOS low temperature co-fired ceramics electronics packaging cytotoxicity assesment capacitance sensing

来源：评论

学校读者我要写书评

暂无评论

A Methodology for Longitudinal Tooth Flank Crowning of the Helical Gear on a CNC Honing Machine

A Methodology for Longitudinal Tooth Flank Crowning of the H...

引用

2014 2nd International Conference on Future Materials engineering and Industry Application(ICFMEIA 2014)

作者： Van-The Tran Ruei-Hung Hsu Chung-Biau Tsay Program of Mechanical and Aeronautical Engineering Feng Chia University Program in Precision System Design Feng Chia University Department of Mechanical and Computer-Aided Engineering Feng Chia University

The gear honing is the most economical way for hard finishing an involute helical gear after hobbing and heat treatment or after shaving and heat treatmentThe gear honing can also be applied to the modification of gear tooth surfaces to compensate for the distortions that occur during heat treatment processMost published papers on the technology of gear honing describes on the principle of generated gear surfaceHowever, the longitudinal tooth flank crowning of a helical gear with honing has not been investigated yetTherefore, in this paper, we proposed a novel method for longitudinal tooth flank crowning of work gear surfaces by setting a crossed angle between the honing cutter and work gear axes as a linear function of honing cutter's traverse feed in the honing processA mathematical model for the tooth profile of work gear honed by a standard honing cutter is also establishedThree numeral examples are presented to illustrate and verify the merits of the proposed gear honing method in longitudinal crowning.

关键词： Gear honing Longitudinal crowning Tooth flank Helical gear Mathematical model

来源：评论

学校读者我要写书评

暂无评论

Moderation of Dependence of Frictional Coefficient of C/C Composite on Temperature due to Addition of Glass Fibers into Carbon Precursor of Phenolic Resin

Moderation of Dependence of Frictional Coefficient of C/C Co...

引用

第十一届中日复合材料学术会议（CJJCC-11）

作者： Masahiro Kimura Kiyotaka Obunai Kazuya Okubo Toru Fujii Graduate student of Engineering Doshisha University Faculty of Computer Science and System Engineering Okayama Prefectural University Department of Mechanical and Systems Engineering Doshisha University

The aim of this study is to increase the friction coefficient between C/C composites at low temperature to moderate the dependence of the frictional coefficient on the temperature condition. In this study, micro-sized glass fibers were introduced to precursor resin for the C/C composite. The preform plate was prepared by filament winding method. The precursor was carbonized by being exposed at the maximum temperature of 2200 °C. To investigate temperature dependence of the friction coefficient, friction test was carried out while test temperature was changed. The result showed it was effective to apply micro-sized glass fibers to be stabile the coefficient of friction between C/C composites. The XRD indicated that SiC was synthesized in the body of fabricated C/C composite. Due to the scratching with prevention of formation of large-sized particles, the frictional force was improved even when the friction was applied at low temperature by the modification of C/C composite.

关键词： Composite material,C/C composite,SiC,Glass fiber,Coefficient of friction

来源：评论

学校读者我要写书评

暂无评论

Corrigendum to “TiO2 nanotube coating on stainless steel 304 for biomedical applications” [Ceram. Int. 41 (2015) 2785–2793]

引用

Ceramics International 2015年第10期41卷 15297-15297页

作者： E. Zalnezhad A.M.S. Hamouda G. Faraji S. Shamshirband Department of Mechanical Convergence Engineering Hanyang University 222 Wangsimni-ro Seongdong-gu Seoul 133-791 Republic of Korea Mechanical and Industrial Engineering Department College of Engineering Qatar University P.O. Box 2713 Doha Qatar Mechanical Engineering Department College of Engineering University of Tehran P.O. Box 11155-4563 Tehran Iran Department of Computer System and Technology Faculty of Computer Science and Information Technology University of Malaya 50603 Kuala Lumpur Malaysia

来源：评论

学校读者我要写书评

暂无评论

Optimal scheduling of single-arm multi-cluster tools with two-space buffering modules

Optimal scheduling of single-arm multi-cluster tools with tw...

引用

2014 IEEE International Conference on Automation Science and engineering, CASE 2014

作者： Yang, Fajun Wu, Naiqi Qiao, Yan Zhou, Mengchu Department of Industrial Engineering School of Electro-Mechanical Engineering Guangdong University of Technology Guangzhou510006 China Institute of Systems Engineering Macau University of Science and Technology China Key Laboratory of Embedded System and Service Computing Ministry of Education Tongji University Shanghai201804 China Department of Electrical and Computer Engineering New Jersey Institute of Technology NewarkNJ07102-1982 United States

A multi-cluster tool is composed of a number of single-cluster tools linked by buffering modules. The capacity of a buffering module can be one or two. Aiming at finding an optimal one-wafer cyclic schedule, this work explores the effect of two-space buffering modules on the performance of a multi-cluster tool. The tool is modeled by a kind of Petri nets. The dynamic behavior of robot waiting and tasks, process modules, and buffers is well captured by the net model. With the model, this work shows that there is always a one-wafer cyclic schedule that reaches the lower bound of the cycle time of a process-dominant tool. Furthermore, a constant-time algorithm is revealed to find such a schedule for the first time for such multi-cluster tools. An illustrative example is given to show the application and power of this new method. © 2014 IEEE.

关键词： Petri nets

来源：评论

学校读者我要写书评

暂无评论

Erratum to: RETRACTED ARTICLE: Application of extreme learning machine for estimation of wind speed distribution

引用

Climate Dynamics 2015年第5期46卷 2025-2025页

作者： Shahaboddin Shamshirband Kasra Mohammadi Chong Wen Tong Dalibor Petković Emilio Porcu Ali Mostafaeipour Sudheer Ch Ahmad Sedaghat Department of Computer System and Technology Faculty of Computer Science and Information Technology University of Malaya Kuala Lumpur Malaysia Faculty of Mechanical Engineering University of Kashan Kashan Iran Department for Mechatronics and Control Faculty of Mechanical Engineering University of Niš Nis Serbia Technical University Federico Santa Maria Valparaíso Chile Industrial Engineering Department Yazd University Yazd Iran Department of Civil and Environmental Engineering ITM University Gurgaon India Department of Mechanical Engineering School of Engineering Australian College of Kuwait Safat Kuwait

Unfortunately, the co-author affiliation Dalibor Petković has been incorrectly published in the original publication.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Towards an integrated SOA-based architecture for interoperable and responsive manufacturing systems using the ISA-95 object model

Towards an integrated SOA-based architecture for interoperab...

引用

5th International Conference of Manufacturing engineering Society, MESIC 2013

作者： García-Domínguez, A. Marcos-Bárcena, M. Medina-Bulo, I. Prades, L. Dept. of Computer Science and Engineering Univ. of Cádiz C/Chile 1 Cádiz CP 11002 Spain Dept. of Mechanical Engineering and Industrial Design Univ. of Cádiz C/Chile 1 Cádiz CP 11002 Spain Dept. of Industrial System Engineering and Design Universitat Jaume I Castellón Spain

ISBN: (纸本)9783038351269

Manufacturing systems need to integrate information from several sources, manage their business processes and coordinate the shop floor in order to meet the schedule at reduced costs. Holonic manufacturing has been proposed to solve these problems and has been normally implemented using agents. However, these implementations are not widely used due to their cost and limited interoperability. In this work, an approach that combines a service-oriented architecture with a multi- Agent system is proposed. A list of rules is designed for deciding how to implement each holon, and is applied to the level 3 activities of ISA-95. The adoption of an enterprise service bus is suggested for decoupling service consumers and producers, and using a complex event processing engine is recommended to detect trends from the day- To-day operations of a plant. This approach is then applied to a grinded ceramic tile manufacturing plant, deriving a general architecture and an implementation of a service-based holon based on the ISA-95 object model, with a human-facing side (a website) and a machine-facing side (a Web Service). © (2014) Trans Tech Publications, Switzerland.

关键词： Manufacture

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：