检索结果-内蒙古大学图书馆

A Study of the Sensitivity of the Fuel Consumption to Driving Strategy by Micro Simulation

Procedia Computer Science 2019年 157卷 375-381页

作者： Fergyanto E. Gunawan Benfano Soewito Nico Surantha Tuga Mauritsius Nobumasa Sekishita Industrial Engineering Department BINUS Graduate Program - Master of Industrial Engineering Bina Nusantara University Jakarta Indonesia 11480 Computer Science Department BINUS Graduate Program - Master of Computer Science Bina Nusantara University Jakarta Indonesia 11480 Information Systems Information Department BINUS Graduate Program - Master of Information Systems Management Bina Nusantara University Jakarta Indonesia 11480 Department of Mechanical Engineering Toyohashi University of Technology Toyohashi Aichi 441-8580 Japan

Global warming due to excessive emission greenhouse gases is a significant issue faced by humanity, and collectively, cars and trucks contribute about 20% to the entire global-warming gases. For a reason, recently, many attempts have been endured to reduce the emission and to increase fuel efficiency, including vehicle platooning, better driving strategy, and increasing engine efficiency. This study intends to provide a more detail assessment regarding the effects of the driving strategy to fuel consumption. For the purpose, the vehicle dynamics are quantified by employing the car-following model based on the optimal velocity model. The fuel consumption is estimated from the regression model of Ahn 18 . The result suggests that the braking distance strongly affects fuel consumption.

关键词： Optimal Velocity Model Micro Simulation Car-Following Model Fuel Efficiency

来源：评论

学校读者我要写书评

暂无评论

Special Session: Re-Imagining engineering Education: Feminist Visions for Transforming the Field

Special Session: Re-Imagining Engineering Education: Feminis...

引用

37th Annual Frontiers in Education Conference (FIE 2007), vol.3

作者： Donna Riley George Catalano Alice Pawley Jessica Tucker Picker Engineering Program Smith College USA Mechanical Engineering Binghamton University USA Industrial and Systems Engineering University of Wisconsin Madison USA Engineering Education Researcher Technology & Society Stony Brook University USA

The goal of this special session is to explore what engineering education might be like if it were done from a feminist perspective, and how this new vision might influence the profession and society. Feminist perspectives are understood broadly to recognize the connectedness of all forms of social injustice. Thus feminist visions of engineering might address a broad set of concerns such as militarism, racism, and global economic inequality as well as sexism and heterosexism. Outcomes include concrete ideas for future research and institutional transformation, collaboration and mutual support of one another's efforts.

关键词： Feminism Liberative pedagogies Social justice engineering ethics

来源：评论

学校读者我要写书评

暂无评论

Acoustic Absorption Characteristics of Perforated Thin Plate with Air Jets and Cavity

引用

Open Journal of Fluid Dynamics 2015年第1期5卷 1-9页

作者： Hiromitsu Hamakawa Hiroki Matsuoka Taiki Yamai Kenta Asakura Toru Otsuru Reiji Tomiku Eru Kurihara Hidechito Hayashi Eiichi Nishida Department of Mechanical Engineering Oita University Oita Japan Graduate School Master’s Program of Engineering Oita University Oita Japan Torishima Pump Mfg. Co. Ltd Takatsuki-shi Osaka Japan Department of Architecture Oita University Oita Japan Department of Mechanical Engineering Nagasaki University Nagasaki Japan Department of Mechanical Systems Engineering Shonan Institute of Technology Fujisawa-shi Kanagawa Japan

The present paper focuses on the effect of air jets through a perforated thin plate on the characteristics of an acoustic absorption coefficient. We measured the flow rate, internal pressure, acoustic pressure, and transfer function by using an improved acoustic impedance tube. The normal incidence absorption coefficient was calculated from the measured transfer function using transfer function methods. As a result, the frequency characteristics of the acoustic absorption coefficient against the frequency showed a maximum value at the local frequency. The peak frequency of the acoustic absorption coefficient depended on the thickness of the background air space and the thickness of the perforated plate. As the flow rate increased through the micropores, the peak level of the acoustic absorption coefficient also increased until a flow rate of 80?l /min. As the flow rate further increased, the peak level of the acoustic absorption coefficient decreased and that of the high frequency band increased.

关键词： Acoustic Absorption Coefficient Perforated Plate Cavity Micropores Air Jets Acoustic Impedance Tube

来源：评论

学校读者我要写书评

暂无评论

Molding Compound Effects on Warpage of Fan-out Wafer Level Packaging

Molding Compound Effects on Warpage of Fan-out Wafer Level P...

引用

International Symposium on Electronic Materials and Packaging

作者： Yan-Cheng Liu Hsien-Chie Cheng Zong-Da Wu Ph.D. Program of Mechanical and Aeronautical Engineering Feng Chia University Taichung Taiwan ROC Department of Aerospace and Systems Engineering Feng Chia University Taichung Taiwan ROC

ISBN: (纸本)9781538656433;9781538656426

Fan-out Wafer-level Packaging (FOWLP) technology has become one of the most rapid packaging technologies which can meet consumer demand for electronic devices. Since there are many advantages to FOWLP, several important issues remain to be addressed, including yield, reliability, thermal performance, die shift, and warpage. Therefore, the main reasons that cause the yield problem of the FOWLP are the mismatch of temperature loading and coefficient of thermal expansion(CTE) among the components of the package, and the other reason is the chemical shrinkage of liquid type epoxy molding compound during the cure process. In this study, the main goal is to assess the process-induced warpage of FOWLP during the fabrication process. To predict the amount of warpage precisely, a process-dependent simulation model which includes the cure-induced shrinkage of the liquid type of molding compound obtained by measurement is proposed. To confirm the validity of the simulation model, the simulation results are compared to the online warpage measurement data. Finally, the influence of the material properties of molding compound parameters on the process-induced warpage is discussed.

关键词： Compounds Semiconductor device modeling Fabrication Packaging Solid modeling Wafer scale integration

来源：评论

学校读者我要写书评

暂无评论

Firefly approach optimized wavenets applied to multivariable identification of a thermal process

Firefly approach optimized wavenets applied to multivariable...

引用

IEEE EUROCON

作者： Leandro dos Santos Coelho Carlos Eduardo Klein Luiz Guilherme J. Luvizotto Viviana Cocco Mariani Industrial and Systems Engineering Graduate Program (PPGEPS) Pontifical Catholic University of Parana Volvo do Brasil Veiculos Ltda Department of Mechanical Engineering (PPGEM) Pontifical Catholic University of Parana

ISBN: (纸本)9781467322331

The combination of wavelet theory and feedforward artificial neural networks has resulted in wavelet neural networks or wavenets (WNNs). In these networks, the activation functions are described by discrete wavelet functions. Due to the promising properties of time-frequency localization and multi-resolution signal processing of the wavelet transform combined with the approximation capability of artificial neural networks, WNNs have found applications in dynamic system identification field during the past years. The paper aims at the development of the WNN based on traditional firefly algorithm (FA). The proposed FA is based on Tinkerbell map to tune the spread of wavelets and number of selected wavelet bases. The FA is a stochastic metaheuristic approach based on the idealized behaviour of the flashing characteristics of fireflies. In FA, the flashing light can be formulated in such a way that it is associated with the objective function to be optimized, which makes it possible to formulate the firefly algorithm. The efficacy of WNN with FA tuning is tested on the identification of a multivariable thermal process.

关键词： Wavelet neural network System identification Firefly optimization Chaotic sequences Metaheuristics

来源：评论

学校读者我要写书评

暂无评论

Formation flying techniques for the virtual telescope for X-ray observations 69

Formation flying techniques for the virtual telescope for X-...

引用

69th International Astronautical Congress: #InvolvingEveryone, IAC 2018

作者： Kyle, Rankin Neerav, Shah John, Krizmanic Steven, Stochaj Asal, Naseri Department of Mechanical and Aerospace Engineering New Mexico State University United States Goddard Space Flight Center NASA United States CRESST NASA GSFC University of Maryland Baltimore County United States Klipsch School of Electrical and Computer Engineering New Mexico State University United States Program Manage/Systems Engineer Space Dynamics Laboratory United States

The Virtual Telescope for X-Ray Observations (VTXO) is an Astrophysics SmallSat mission being developed to demonstrate 10-milliarcsecond X-ray imaging using a Phase Fresnel Lense (PFL)-based space telescope. PFLs promise to provide several orders of magnitude improvement in angular resolution over current state of the art X-ray optics. However, PFLs for astronomical applications requires a very long focal length, for VTXO the focal length is estimated to be in the range of 0.5 km to 4 km. Since these focal lengths are not feasible on a single spacecraft, the proposed solution is to use two separate spacecraft, one with the lense(s), and the second with an X-ray camera. These two spacecrafts will then fly in a formation approximating a single rigid telescope. In order to achieve this configuration, the two spacecraft must maintain the formation a focal length distance apart, with centimeter level control, and sub-millimeter level knowledge requirements. Additionally, for the telescope to achieve sufficient exposure time, the system must keep the telescope axis pointed at a fixed target on the celestial sphere for durations on the order of a few hours. VTXO's system architecture calls for two CubeSats to operate in a highly eccentric Earth orbit with one of the spacecraft's traveling on a natural keplarian orbit. The second spacecraft will then fly on a â€œpseudoâ€¥ orbit maintaining a fixed offset relative to the celestial sphere during observations. Observations with this system will occur near apogee where differential forces on the spacecrafts are minimal which in turn minimizes fuel consumption. The â€œpseudoâ€¥ orbit where the second spacecraft is located is not quite a stable orbit requiring small continuous propulsion to maintain formation. This paper and presentation will overview VTXO's system architecture, additionally it will look in depth at the formation flying techniques, including fuel consumption, and methods for establishing, and maintaining the form

关键词： Orbits

来源：评论

学校读者我要写书评

暂无评论

Using Leaves as a Model for Teaching Watershed Concepts in Natural Resources Science and engineering programs

Natural Sciences Education

引用

Natural Sciences Education 2017年第1期46卷 1-9页

作者： Anandhi, Aavudai Yang, Yang Hubenthal, Michael Dep. of Special Education Counseling and Student Affairs College of Education Kansas State Univ. Manhattan 66506 KS United States Biological Systems Engineering Florida Agricultural and Mechanical Univ. Tallahassee 32307 FL United States Education and Outreach Program Incorporated Research Institutions for Seismology (IRIS) Washington 20005 DC United States

Core Ideas: Watershed is an important concept in science and engineering of natural resources. Introducing watershed concept using a leaf that students see every day is novel. Using leaf analogy, watershed concept can be taught universally. This article examines the effects of using leaves, something most students see every day and have some familiarity with, as an analogy for the concept of watersheds in an undergraduate water resources engineering course. The ultimate goal of the leaf/watershed analogy and associated instruction is to increase students’ understanding of hydrology principles, which in turn may facilitate better watershed management through increased public awareness, increased adoption of appropriate best management practices, and improved policy decisions. The assessment was performed with junior and senior undergraduate students enrolled in a Water Resource engineering course. The assessment results showed that overall, students benefitted from the leaf analogy as a tool for learning watersheds. However, this effect varied depending on students’ learning style preferences. Copyright © 2017 by the American Society of Agronomy

关键词： watersheds foliage engineering calculating program college student Analogy Water Resources engineering Public awareness Students Water Resources Familiarity

来源：评论

学校读者我要写书评

暂无评论

Implementation of Generate and Test Algorithm for Junior High School Zoning System in Malang 4

Implementation of Generate and Test Algorithm for Junior Hig...

引用

4th International Conference on Vocational Education and Training, ICOVET 2020

作者： Ratnasar, Novia Agustin Mawarni, Inggar Tri Nur Handayani, Anik Wibawa, Aji Prasetya Hammad, Jehad A. H Wibowotomo, Budi Sugandi, MacHmud Universitas Negeri Malang Vocational Education Program Department Indonesia Universitas Negeri Malang Electrical Engineering Dept Indonesia Al-Quds Open University Faculty of Technology and Applied Sciences Department of Computer Information Systems Palestine Universitas Negeri Malang Industrial Technology Department Malang65145 Indonesia Universitas Negeri Malang Mechanical ENgineering Department Malang65145 Indonesia

ISBN: (纸本)9781728181318

Admission of new students in 2019 through zoning still faces many obstacles, one of which is the readiness of the application to determine the distance of a student's house from the nearest recommended school. The purpose of this study is to provide better recommendations regarding the shortest and most accurate distance in the zoning system for admission of junior high school students in Malang by using the Generate and Test algorithm without having to do it manually or using other map applications. The results of this study indicate that the distance value obtained from the haversine formula corresponds to the original distance measured through a zoning application that applies the Generate and Test algorithm to measure the closest distance from the student's location. The recommended distance is given through a process of repetition and comparison of nodes. By using the generate and test algorithm for the search process the shortest distance from the user to the destination school has an average time of 6.2MB, the level of accuracy is the same as the Haversine calculation. © 2020 IEEE.

关键词： Students

来源：评论

学校读者我要写书评

暂无评论

Hierarchical method for prioritization of sustainable products' characteristics

引用

Chemical engineering Transactions 2016年 52卷 529-534页

作者： Junior, Osiris Canciglieri Krüger, Suewellyn Sant'Anna, Angelo M.O. Industrial and Systems Engineering Graduate Program Pontifical Catholic University of Parana Rua Imaculada Conceição Curitiba1155 Brazil Mechanical Engineering Department Federal University of Bahia Rua Aristides Novis 2 Salvador Brazil

ISBN: (纸本)9788895608426

The conception of the manufacturing process to be initially applied in the parts rapid production targeting a first embodiment of an idea (prototypes) and without many demands on strength and accuracy is called rapid prototyping. New rapid prototyping technologies are more accessible under the aspects of cost, accuracy, usability, environmental and prototypes started to be increasingly explored in the sustainable product development process. This paper proposes the application of hierarchical analysis method to support the decision-making in Rapid Prototyping processes based on the analysis of product and RP technology and prototype characteristics. The application of the developed method consists of assigning numeric values to the product characteristics and to the important characteristics for users in order to build the comparison matrix to perform the assessment and the prioritization steps of the relevant features. Performing the prioritization of features considered most important along with the characteristics of the chosen prototyping technology make possible the analysis of the effect of the characteristics prioritization. The concepts of product development, rapid prototyping and analytic hierarchy process for the sustainable product were used in a structure (lightweight dual) to evaluate the proposed strategy. The lightweight dual product from the 3D printing technology has been successful to show the product's purpose and functionality due to its lower cost, short execution time, good surface finishing and dimensional accuracy. The results show that the analysis of the sustainable product for rapid prototyping technology based on characteristics prioritization strategy improves the product design. © 2016, AIDIC Servizi S.r.l.

关键词： Rapid prototyping

来源：评论

学校读者我要写书评

暂无评论

Predictive Visual Feedback Control with Eye-in-Hand System via Stabilizing Receding Horizon Approach

Predictive Visual Feedback Control with Eye-in-Hand System v...

引用

IEEE Conference on Decision and Control

作者： Toshiyuki Murao Teruki Yamada Masayuki Fujita Master Program of Information Systems Architecture Advanced Institute of Industrial Technology Tokyo Japan Department of Mechanical and Control Engineering Tokyo Institute of Technology Tokyo Japan

ISBN: (纸本)1424401704;9781424401703

This paper investigates vision based robot control based on a receding horizon control strategy, as a first step for a predictive visual feedback control. Firstly, the brief summary of the 3D dynamic visual feedback system with eye-in-hand configuration is given. Next, a stabilizing receding horizon control for the 3D dynamic visual feedback system, a highly nonlinear and relatively fast system, is proposed. The stability of the receding horizon control scheme is guaranteed by using the terminal cost derived from an energy function of the visual feedback system. Furthermore, simulation results are assessed with respect to the stability and the performance

关键词： Feedback control Control systems Stability Robot sensing systems Nonlinear dynamical systems Nonlinear control systems Cost function Robot vision systems Manipulator dynamics Visual servoing

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：