检索结果-内蒙古大学图书馆

IEEE International Conference on mechatronics and Automation

作者： Xiaoqing Qiu Yue Ma Zijie Wang Bin Li Lin Pin Doudou Duan Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

ISBN: (数字)9798350388077

ISBN: (纸本)9798350388084

Vibration generated by road bumps can cause secondary injury to patients. The risk of secondary injury can be significantly reduced by attaching an active suspension system to isolation medical beds. In this paper, a five DOFs (degree of freedoms) hybrid mechanism is designed by combining a 3-P(UU) 2 mechanism and a 2-PUS mechanism through a universal joint, leading to 3T2R movement capabilities to reduce the vibration. The kinematic models are firstly established to evaluate the displacement, velocity and acceleration of the hybrid mechanism. On this basis, a typical trajectory is planned to simulate the movement capabilities of the mechanism by using the trapezoidal acceleration curve motion law. Finally, the effectiveness of the kinematic models is verified by compared the results with those simulated by SolidWorks. The research results of this paper provide a solid foundation to the dimensional synthesis of the hybrid mechanism.

关键词： Vibrations Performance evaluation Solid modeling Roads Kinematics Solids Vectors

来源：评论

学校读者我要写书评

暂无评论

Mechanical Design of Out-pipe Detection Mechanisms for Pipeline Defects

Mechanical Design of Out-pipe Detection Mechanisms for Pipel...

引用

IEEE International Conference on mechatronics and Automation

作者： Guangyin Nie Xinhua Zhao Yihan Ren Liang Liu Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

ISBN: (数字)9798350388077

ISBN: (纸本)9798350388084

Pipes in various are dominated in in the process of industrial production. To avoid the pipeline leak due to inner corrosion, it is essential to develop pipe inspection mechanisms to detect the wall thickness of the pipes used in production. The paper presents three kinds of out-pipe detection mechanisms (ODM) for different petrochemical pipeline detection demands based on eddy current testing (ECT) method. A linear inspection mechanism with fixed length is firstly proposed to detect defects of straight pipe. Secondly, a rotary inspection mechanism is designed for pipeline weld detection. Besides, an out-pipe scanning wheeled robotic mechanism is developed to detect wall thickness of pipes and avoid small obstacles such as valves on the pipelines. Lastly, detection experiments and simulations are carried out to verify the effectiveness of the designed out-pipe detection mechanisms.

关键词： mechatronics Welding Pipelines Production Inspection Valves Petrochemicals

来源：评论

学校读者我要写书评

暂无评论

Wireless power transmission system with CC and CV output based on hybrid LCC-S/P topology

Wireless power transmission system with CC and CV output bas...

引用

Electronics and Communication, Network and Computer Technology (ECNCT), International Conference on

作者： Kun Li Zheng Gong Jiaheng Meng Qing Liu Tianjin Key Laboratory of Film Electronic and Communication Device Tianjin University of Technology Tianjin China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology Tianjin China

Wireless Power Transfer (WPT) technology provides a convenient and efficient power supply solution for mobile devices. The utilization of constant current (CC) and constant voltage (CV) control in WPT systems proves valuable for charging battery applications. This paper presents a novel WPT system with CC and CV output characteristics, employing a switching topology. Specifically, the LCC-S and LCC-P topologies are applied and rigorously simulated. The proposed MCR-WPT system’s output characteristics in both CC and CV modes are meticulously validated using Saber software. The simulation results distinctly demonstrate the system’s capability to achieve CC and CV outputs within a varying load resistance range of 5Ω to 30Ω, thus conclusively establishing the efficacy of the topology switching technology.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Flexible liquid metal electromagnetic shielding materials

引用

Science China(Technological Sciences) 2023年第10期66卷 2757-2774页

作者： BAI YunLong ZHANG Jie ZHANG MingKuan RAO Wei Key Laboratory of Cryogenics Technical Institute of Physics and ChemistryChinese Academy of SciencesBeijing 100190China Beijing Key Lab of CryoBiomedical Engineering and Key Lab of Cryogenics Technical Institute of Physics and ChemistryChinese Academy of SciencesBeijing 100190China School of Engineering Science University of Chinese Academy of SciencesBeijing 100039China School of Future Technology University of Chinese Academy of SciencesBeijing 100049China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin 300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of TechnologyTianjin 300384China

The demand for flexible shielding has been rapidly growing in recent *** materials using solid metals,carbon materials,or MXenes as shielding units usually have difficulty in combining high shielding and flexibility(stretching and bending characteristics),and thus they gradually fail to meet the shielding needs of flexible ***,shielding materials with both flexibility and high conductivity are urgent to fill this ***-based room temperature liquid metal(LM)is an emerging functional material with a low melting point,low viscosity,low modulus,and easy ***,due to wettability and compatibility issues,it is difficult to apply bulk LMs directly in the field of electromagnetic shielding(EMS).The article reviews the fabrication methods,performance,and applications of LMs EMS materials from three perspectives:Macroscopic LMs,micro/nano-LMs,and LM-based *** gallium-based liquid EMS materials demonstrate the characteristics of high shielding performance with stretchability and a wide shielding *** this review,different types of gallium-based LM materials are described from macroscopic to microscopic,from liquid to semi-solid,from high density to low density,from room temperature to ultra-low temperature,and from monolayer structure to multilayer *** prospect of LM materials as amorphous high-performance EMS materials is demonstrated in various applications,such as mobile communication,astronomical observation,radar,and medical detection,showing tremendous potential in the EMS field.

关键词： liquid metal electromagnetic shielding flexibility

来源：评论

学校读者我要写书评

暂无评论

Research on solar-coupled ground-source variable frequency air conditioning system based on trnsys

Research on solar-coupled ground-source variable frequency a...

引用

Geothermal Resources Council Virtual Annual Meeting and Expo: Clean, Renewable and Always On, GRC 2020

作者： Deng, Yiming Wang, Zhigang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin University of Technology

ISBN: (纸本)9781713822097

By building a model of an air conditioning system with a solar-coupled ground-source heat pump, the simulation shows that the pump has been running at its maximum load, especially in terms of energy consumption. In order to solve this problem, the variable frequency drive (VFD) pump is adopted. Only the variable frequency of the water pump at the load side and the water pump at the source side has been considered, and the flow rate of the pump is determined according to the load value. The solar side water pump does not adopt frequency conversion to operate at the maximum flow to ensure the maximum utilization of solar energy. When the load side water pump and the source side water pump adopt frequency conversion, this will not only cause a change in flow but also a change in the power consumption of the unit, which will further affect the unit's operating performance. On the other hand, based on the simulation results of the load, the cooling capacity is greater than the heating capacity, which will cause the soil temperature to rise, that is, the soil temperature will be out of balance. Therefore, it is necessary to add a cooling tower to dissipate the temperature of the buried pipe in summer. The total energy consumption of the system is 22,411,541 kW, which is 27% less than the conventional energy consumption. In summer, the COP of the unit is about 6.9, which is 42% higher than the conventional situation. And in winter, the COP is about 4.8, which is 27% higher than the conventional model. © 2020 Geothermal Resources Council. All rights reserved.

关键词： Energy utilization

来源：评论

学校读者我要写书评

暂无评论

A Study of Soil Modelling Methods Based on Line-Structured Light——Preparing for the Subsoiling Digital Twin

SSRN

引用

SSRN 2024年

作者： Li, Xia You, Birong Wang, Xuhui Zhao, Zhipeng Qi, Tianyu Xu, Jinyou Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Centre for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

The virtual model serves as the foundation for constructing a digital twin system. In order to provide technical guidance for the construction of a digital twin system for subsoiling, this study employed the line structured light method for soil model generation. Field experiments and indoor experiments were conducted separately, using the extreme value method, grayscale centroid method, and Steger algorithm to extract the laser centrelines in the experiments. The results show that the extreme value method and grayscale centroid method have almost the same processing time when dealing with two types of images, which are 1.9ms and 18ms respectively. The Steger algorithm has a significant difference in processing time when dealing with indoor and field images, with the processing time being longer for indoor images, approximately 300ms. Regarding memory usage, there is a large difference when the extreme value method processes two sets of images. Therefore, the grayscale centroid method is the most suitable method for centreline extraction in a digital twin system for subsoiling. When performing 3D reconstruction, the camera shooting frequency is positively correlated with the reconstruction effect, while the moving speed is negatively correlated with the reconstruction effect. Of course, the reconstruction effect is also related to the performance of the binocular camera used. In addition, the processing time for each image during reconstruction is within 1ms, indicating that the method of line laser 3D reconstruction can solve the problem of soil modelling in subsoiling digital twin. © 2024, The Authors. All rights reserved.

关键词： Soils

来源：评论

学校读者我要写书评

暂无评论

Human Activity Recognition Based on a Modified Capsule Network

引用

Mobile Information systems 2023年第1期2023卷

作者： Zhu, Shanying Chen, Wei Liu, Fulong Zhang, Xiaotao Han, Xiupeng Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin China

Human activity recognition (HAR) has attracted considerable research attention in the past decade with the development of wearable sensor technology and deep learning algorithms. However, most of the existing HAR methods ignored the spatial relationship of features, which may lead to recognition errors. In this paper, a novel model based on a modified capsule network (MCN) is proposed to accurately recognize various human activities. This novel model is composed of a convolution block and a capsule block, which can achieve end-to-end intelligent recognition. In the meantime, the spatial information among features is preserved through a dynamic routing process. To validate the effectiveness of the model, a human activity dataset is constructed by placing an inertial measurement unit (IMU) on the calf of the volunteers to collect their activity data in daily life, including walking, jogging, upstairs, downstairs, up-ramps, and down-ramps. The recognition accuracy of this novel approach can reach 96.08%, which performs better than the convolutional neural network (CNN) with an accuracy of 91.62%. In addition, it is evaluated on two public datasets named WISDM and UCI-HAR, and the accuracies achieve 98.21% and 95.28%, respectively, which presents higher accuracy than the reported results obtained from benchmark algorithms like CNN. The experimental results show that the proposed model has better activity detection capability and achieves outstanding performance for HAR. © 2023 Shanying Zhu et al.

关键词： Convolution

来源：评论

学校读者我要写书评

暂无评论

The Influence of Microstructural Evolution on Performance Degradation in Solid Oxide Fuel Cells

SSRN

引用

SSRN 2024年

作者： Shao, Yuqing Shen, Junjie Ren, He Zhao, Liwei Xue, Ziyu Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

The microstructure evolution effects performance degradation of solid oxide fuel cells (SOFCs) under elevated temperatures. The microstructural evolution, including elemental diffusion, phase changes, and Ni agglomeration, is studied via X-ray diffraction (XRD) and scanning electron microscopy energy dispersive spectrometer (SEM-EDS) techniques. The ohmic resistance and polarization impedance, including activation polarization impedance and concentration resistance, causing the performance degradation, are estimated using electrochemical impedance spectroscopy (EIS) and distribution of relaxation time (DRT) techniques. The voltage gradually decreases from 0.9 V, at the beginning of the load, to 0.75 V after 240 h of service. The formation of pores at the (La0.6Sr0.4Co0.2Fe0.8O3-δ) LSCF/(Gd0.1Ce0.9O2-δ) GDC interface and cracks at the (8 mol% Y2O3-stabilized ZrO2) YSZ/NiO-YSZ interface induce the increase in ohmic resistance. The increase in activation polarization resistance is attributed to the formation of the SrZrO3 phase and Gd2(Zr1-xCex)2O7, at the YSZ/GDC interface, and the redistribution and coarsening of Ni. The formation of Co- or Fe-based oxides in the LSCF layer slightly increases the concentration polarization impedance. © 2024, The Authors. All rights reserved.

关键词： Scanning electron microscopy

来源：评论

学校读者我要写书评

暂无评论

Simulation Study on the Influence of Drilling Parameters on the Temperature of Skull Drilling

Simulation Study on the Influence of Drilling Parameters on ...

引用

2021 IEEE International Conference on Electrical Engineering and mechatronics Technology, ICEEMT 2021

作者： Jiang, Wenyu Liu, Zhenzhong Tianjin University of Technology National Demonstration Center For Experimental Mechanical and Electrical Engineering Education School of Mechanical Engineering Tianjin Key Laboratory For Advanced Mechatronic System Design and Intelligent Control Tianjin China

ISBN: (纸本)9781665441285

Skull drilling is an important and difficult process in neurosurgical craniotomy, which will inevitably produce a lot of heat. Correct understanding of the heat production law of skull drilling has important guiding significance for craniotomy robot. In this study, cortical bone and cancellous bone were layered to establish models according to the 3D reconstruction data of skull. The finite element method based on ABAQUS is used to establish the skull drilling model and realize the simulation of bone tissue surgical instrument interaction state for surgical robot. The results show that when the drill rotation speed and feed speed increase, the drilling temperature will also increase, but the drill rotation speed will have a more significant effect on bone drilling temperature, and when the drill rotation speed is low (300r/min, 600r/min), the drill bit diameter has little effect on the drilling temperature, but when the drill rotation speed is higher (900r/min, 1200r/min), the larger diameter drill bit(11mm) will produce more drilling heat. © 2021 IEEE.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

Energy-aware Trajectory Optimization for UAV-enabled wireless powered WSN

Energy-aware Trajectory Optimization for UAV-enabled wireles...

引用

Fully Actuated system Theory and Applications (CFASTA), Conference on

作者： Feihang Qiu Jing Guo Huineng Diao Xu Zhang School of Mechatronic Engineering and Automation Foshan University Foshan China School of System Design and Intelligent Manufacturing Southern University of Science and Technology Shenzhen China Shenzhen Key Laboratory of Control Theory and Intelligent Systems Southern University of Science and Technology Shenzhen China

ISBN: (数字)9798350373691

ISBN: (纸本)9798350373707

Unmanned Aerial Vehicle enabled (UAV-enabled) wireless powered Wireless Sensor Networks (WSN) provide an effective way to deploy massive and passive sensors for environmental monitoring in harsh environments. This study focuses on maximizing the total energy received by all Sensor Nodes (SNs) through the optimization of the UAV trajectory. An energy-aware smoothing trajectory method is proposed by considering the dynamic energy requirements of SNs. First, the optimization problem (P1) is formulated according to the mathematical model. Second, the B-spline method is introduced to turn the smoothing problem into a solvable problem (P2). Finally, problem (P2) is solved under the constraints to obtain the trajectory solution. Simulation results indicate the proposed method can adjust the overall trajectory according to the SNs demands. Meanwhile, according to the wake-up distance and energy-aware, the trajectory of some nodes can be locally adjusted without affecting other trajectory segments.

关键词： Wireless communication Wireless sensor networks Smoothing methods Simulation Autonomous aerial vehicles Mathematical models Trajectory

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：