检索结果-内蒙古大学图书馆

2nd IEEE International Conference on Innovative Research and Development, ICIRD 2019

作者： Bimantoro, Renardi Ardiya Rahardjo, Amien Husnayain, Faiz Aryani, Dwi Riana Hudayala, Chairul Universitas Indonesia Department of Electrical Engineering Faculty of Engineering Depok16424 Indonesia Energy System Engineering Master Study Program Faculty of Engineering Universitas Indonesia Depok16424 Indonesia

ISBN: (纸本)9781728128252

Instrument current transformers (CTs) are widely used in various types of electrical energy measurement. Eddy current losses, losses of hysteresis, a saturation of CT, and inevitable flux leaks could lead to errors including errors in the ratio and phase angle. Improving the accuracy of CT measurement could be achieved in many ways. In this study, a bisection calibration method to overcome the error by implementing correction factor integrated with the Arduino codes is investigated. The reliability of this system has been tested in two different situations, which are a constant and variable load experiments. The result shows that the readout of the developed instrument using 100 A/50mA CT could achieve the deviation value of less than 2%, confirming the excellence accuracy of energy meter. © 2019 IEEE.

关键词： Electric instrument transformers

来源：评论

学校读者我要写书评

暂无评论

Developing indicators of green initiation and green design of green supply chain management in construction industry 2

Developing indicators of green initiation and green design o...

引用

2nd International Conference on Electrical engineering and Green Energy, CEEGE 2019

作者： Wibowo, Mochamad Agung Handayani, Naniek Utami Farida, Nur Nurdiana, Asri Department of Civil Engineering Faculty of Engineering Diponegoro University Indonesia Department of Industrial Engineering Faculty of Engineering Diponegoro University Indonesia Study Program of Civil Engineering Vocational School Diponegoro University Indonesia

Project is a set of interrelated activities and requires skills from different professions, and also project is involved the various of stakeholders in each phase of the Project Life Cycle. Implementation of Green Supply Chain in construction projects meant to bring the concept of eco-friendly in every process from the initiation phase, planning phase, the construction phase, and the operation and maintenance phase. It is necessary to identify indicators of green initiation and green design and how to explain the relationship between the role of initiation by the owner and the design process by a design consultant. This study aims to identify the indicators of green initiation and green design concept as part of Green Supply Chain. The method used for this study is a descriptive research that identifies and develop a framework for implementing green initiation and green design in construction industry that consists of concept, dimensions, elements, and indicators. GSCM in construction projects was determined by 9 indicators in the green initiation phase and 40 indicators in the green design phase. The success of green concept in construction project is very determined from these two phases as the beginning of the process, and the most important parties are the owners and design consultants. © 2019 The Authors, published by EDP Sciences.

关键词： Construction industry

来源：评论

学校读者我要写书评

暂无评论

Setting time and compressive strength of geopolymer concrete with variations in the addition of cement

引用

AIP Conference Proceedings 2024年第1期3098卷

作者： Yayan Adi Saputro Jati Widagdo Syamsul Arifin Sa’dullah Assa’idi Nimas Aulia Pambajeng Miftahunnajah Abdul Talib Bon Civil Engineering Program Study Faculty of Science and Technology Islamic University of Nahdlatul Ulama Jepara Jepara Indonesia Product Design Program Study Faculty of Science and Technology Islamic University of Nahdlatul Ulama Jepara Jepara Indonesia Management Program Study Faculty of Economics and Business Islamic University of Nahdlatul Ulama Jepara Jepara Indonesia Islamic Education Management Study Program Islamic University of Nahdlatul Ulama Jepara Jepara Indonesia Balekambang Polytechnic Jepara Jepara Indonesia Professor of Technology Management Faculty of Technology Management and Business Universiti Tun Hussein Onn Malaysia Parit Raja Johor Malaysia

The increasing demand for cement in the world of construction can have an extraordinary effect, especially in the production of cement which produces CO2. So we need an alternative material as a substitute and even replace the role of cement. Utilization of coal waste in the form of fly ash is in the spotlight to be maximized. Therefore this research was conducted as an alternative contribution to the solution using geopolymer concrete in terms of setting time and compressive strength with variations in the addition of cement. The method used is experimental in the laboratory which produces qualitative data for further numerical calculations. Tests focused on the setting time and compressive strength of concrete using 5 mix designs with cement variations ranging from 10%, 20%, 30%, 40% of the use of fly ash. The results of the setting time with the highest duration, namely 100% FA=1.5, 95 minutes initial setting time and 225 minutes final setting time, then decreased to the lowest duration, namely 60% FA: Pc 40%=1.5. The initial setting time is 15 minutes and the final setting time is 37 minutes. The highest concrete compressive strength results in the MD 4 mix design with 70% FA mixture: Pc 30%=1.5, which is 43.3 MPa. While the lowest compressive strength is the design mix MD 1 with a mixture of 100% FA=1.5 of 21.8 MPa.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Prediction of power transformers lifetime using thermal modeling analysis 2

Prediction of power transformers lifetime using thermal mode...

引用

2nd IEEE International Conference on Innovative Research and Development, ICIRD 2019

作者： Afifah, Sarah Nainggolan, Jannus Maurits Wibisono, Gunawan Hudaya, Chairul Universitas Indonesia Departement of Electrical Engineering Faculty of Engineering Depok16424 Indonesia Energy System Engineering Master Study Program Faculty of Engineering Universitas Indonesia Depok16424 Indonesia

ISBN: (纸本)9781728128252

Transformer is one of the main components in distribution system of electrical power system towards the consumers, thereby any damage to the transformers will hinder the distribution of electricity towards the consumers, and in turn will make the SAIDI and SAIFI levels go up. High temperature in transformers can cause degradation in the insulation of transformers which in turn will cause failure in transformers. When the temperature in winding reaches or goes beyond the limit of 110°C, a degradation in insulation will start happening and the remaining life of transformers will decrease. Damage in transformers will cause disturbance in electrical power system and result in a major economic loss. Before damages occur, transformers need to be changed up until it is deemed to be no longer efficient, this can be done by replacing the transformer that is about to be damaged. To predict when a transformer is about to break, a calculation is made based on thermal modelling according to IEEE Std C57.91-1995 with its most prominent variable being Hot Spot Temperature (HST). HST is obtained by MATLAB programming using Annex G of IEEE Std. C57.91-1995. By obtaining HST, thus the remaining lifetime of transformers can be predicted. This study analysed the effect of loading, hot-spot temperature, and ambient temperature on the remaining lifetime of a transformer. The higher those three factors, the quicker the transformer will break, with loss of life percentage increasing exponentially. The highest loading, hot spot temperature, and ambient temperature given in this research gives percent loss of life of 0.0888332%, 0.0193394%, 0.020753% respectively. © 2019 IEEE.

关键词： Power transformers

来源：评论

学校读者我要写书评

暂无评论

Profile of bovine teeth potency as hydroxyapatite scaffold

引用

AIP Conference Proceedings 2023年第1期2536卷

作者： Endanus Harijanto Anita Yuliati Prihartini Widiyanti Dental Material Department Faculty of Dentistry Universitas Airlangga Surabaya Indonesia Biomedical Engineering Study Program Department of Physics Faculty of Science and Technology Universitas Airlangga Surabaya Indonesia

Background: Bone destructions in the oral cavity are due to trauma, chronic infection, congenital malformations, or resection surgery, most often by using an autologous bone graft technique. The problem using this technique are limited donors and suppliers, high cost, host potential imune response becauce accepts foreign bone tissue also potential transmission diseases. Another solution in tissue engineering techniques is using the scaffold. Hidroxyapatite is one of the osteoconductive potentialy ceramic materials in scaffold fabrication. Objective: To prove that bovine teeth hydroxyapatite have characteristic as scaffold for bone tissue regeneration. Methods: HA was obtained by calcining bovine teeth at 1000°C for 3 hours, Fourier Transform Infra Red Spectroscopy (FTIR) test , Energy Dispersive X-Ray (EDX) test and X-Ray Diffraction (XRD) test. Results: Bovine teeth hydroxyapatite to showed of hydroxyl, phosphate and carbonate functional groups (FTIR test). Average Ca/P=1.97. Conclusion: Hydroxyapatite from bovine teeth has potency as scaffold through the chemistry and physical characteristics.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Analysis Performance of Grid Tie Photovoltaic Type Polycrystalline Using Solar Irradiance Simulation 4

Analysis Performance of Grid Tie Photovoltaic Type Polycryst...

引用

4th International Conference on Energy, Environment, Epidemiology and Information System, ICENIS 2019

作者： Pratama, Kurniawan Galih Putra Hermawan, Hermawan Andromeda, Trias Magister Study Program of Electrical Engineering Diponegoro University Semarang Indonesia Department of Electrical Engineering Faculty of Engineering Diponegoro University Semarang Indonesia

Indonesia is a country consisting of several islands some of which are still not covered by electricity. It is this source of PV that can be used to meet the needs of people who are not yet affordable with PLN electricity. Basically, PV includes the generation of new renewable energy types. This new form of energy comes from sunlight. Using semiconductor materials can convert energy from sunlight to electrical energy. Because in Indonesia this includes tropical climates located on the equator line, making Indonesia has a very high intensity of light. Several factors affect electrical energy, namely the extent of PV to be used, the total irradiance received by PV, the decrease in performance due to weather and cleanliness of the PV used such as snow and oiliness. In this study explained the Analysis of Irradian-based Grid Tie photovoltaic performance with Polycrystalline PV types. Taking irradian data using a Solar Power Meter, irradiance and temperature data at a certain time will use the Incremental Maximum Power Point Tracking (MPPT) method, DC-DC boost converter, inverter, voltage source converter (VSC) using algorithm and equipment controls connected to network. This research is simulated using Matlab with the Simulink program. © The Authors, published by EDP Sciences, 2019.

关键词： Solar energy

来源：评论

学校读者我要写书评

暂无评论

Single Phase AC Current Controller by Using Hysteresis Method 4

Single Phase AC Current Controller by Using Hysteresis Metho...

引用

4th International Conference on Energy, Environment, Epidemiology and Information System, ICENIS 2019

作者： Zulkhairi Facta, Mochammad Andromeda, Trias Hermawan Setiawan, Iwan Magister Study Program of Electrical Engineering Diponegoro University Semarang Indonesia Department of Electrical Engineering Faculty of Engineering Diponegoro University Semarang Indonesia

Generally, the electrical power supply acts as a voltage source only but many applications, current sources are needed. In conventional methods, to provide a current source, an electric power supply with variable voltage is adjusted to give the amount of current. In some electrical applications and devices, there is a demand to have a constant voltage with a variable current. This paper proposes a single phase alternating current controller as a power supply with a current source that can be adjusted using the hysteresis method. The advantage of the hysteresis method is that the electric current can follow changes in setting values and have a good response to any changes in the load given. This method, the actual current can follow the reference flow as needed. During testing, the inverter has succeeded in producing 3 Ampere 50 Hz at the output voltage of 50 Volt which is sent to the load. In applications, the proposed power supply is useful as an inverter to convert DC current into AC current. Furthermore, this proposed inverter has the opportunity as a renewable energy resource converter to convert direct current from photovoltaic to alternating current for various electronic devices in industries and households. © The Authors, published by EDP Sciences, 2019.

关键词： Hysteresis

来源：评论

学校读者我要写书评

暂无评论

Simulation of Grid-Tied Photovoltaic System Based on Solar Irradiance and Temperature Data in Semarang 4

Simulation of Grid-Tied Photovoltaic System Based on Solar I...

引用

4th International Conference on Energy, Environment, Epidemiology and Information System, ICENIS 2019

作者： Fomba, Ahmed Jumui Sumoi Hermawan, Hermawan Andromeda, Trias Facta, Mochammad Setiawan, Iwan Magister Study Program of Electrical Engineering Diponegoro University Semarang Indonesia Department of Electrical Engineering Faculty of Engineering Diponegoro University Semarang Indonesia

This paper presents a simulation of a grid-connected photovoltaic power system. A complex model of power distribution system is developed in MATLAB Simulink, then it will be simulated to determine an amount of power delivered to the grid based on irradiance and temperature. Solar irradiance data collection is conducted using a solar irradiance meter. These weather data (solar irradiances and temperatures) are transformed into signal inputs and model through a grid-tied Photovoltaic (PV) model system which consists of PV, incremental conductance Maximum Power Point Tracking (MPPT) method, DC-DC boost converter, inverter, voltage source converter (VSC) control algorithms, and grid equipment. The output variables can be related to current, voltage or power. However, tracing of the current-voltage (I-V) characteristics or power-voltage (P-V) characteristics are the vital need to grid-tied PV system operation. Changes in solar irradiance and temperature imply changes in output variables. Detailed modelling of the effect of irradiance and temperature, on the parameters of the PV module and the output parameters will be discussed. With the aid of this model, one can have a feasible idea about the solar energy generation potential at given locations. This comprehensive model is simulated using MATLAB/Simulink software. © The Authors, published by EDP Sciences, 2019.

关键词： Solar energy

来源：评论

学校读者我要写书评

暂无评论

study on the waste valve's stroke to water hammer pressure and flow patterns in a hydraulic ram pump

引用

AIP Conference Proceedings 2023年第1期2568卷

作者： I. P. Widiarta M. Suarda I. G. K. Sukadana M. Sucipta N. M. Suantini I. N. Suweden 1Student at Master Study Program of Mechanical Engineering Faculty of Engineering Udayana University Denpasar Bali Indonesia 2Mechanical Engineering Department Faculty of Engineering Udayana University Denpasar Bali Indonesia 3Chemistry Department Faculty of Mathematics and Natural Science Udayana University Denpasar Bali Indonesia 4Electrical Engineering Department Faculty of Engineering Udayana University Denpasar Bali Indonesia

The pressure in the hydraulic ram pump increases due to a sudden cessation of flow out through the waste valve when the waste valve is closing. The increasing of water hammer pressure is strongly influenced by velocity of the water flow in the drive pipe. Therefore, the waste valve has an important role in mechanism of the occurrence of water hammer pressure, performance, and flow patterns in the hydraulic ram pump. This study investigated the water hammer pressure and the flow patterns in the hydraulic ram pump that has been installed at Bon sub-village, as well as its performance at various strokes of the waste valve. In addition, CFD simulation using Ansys Fluent was conducted. The result show that increasing stroke of the waste valve increase the water velocity in the drive pipe and the water hammer pressure, and the optimum of the waste valve stroke has been predicted subject to volumetric and total efficiency using the equation of their trendlines. Furthermore, the flow patterns such as vortex, split flow, and blockage mass in the hydraulic ram pump have been identified.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Effect of Improvement of Temperature and Gas Amount on Nitrogen Flooding

引用

IOP Conference Series: Earth and Environmental Science 2021年第1期819卷

作者： M T Malinda R Setiati M A Azizi Y F Simbolon Petroleum Engineering Study Program Trisakti University Jakarta Indonesia Mining Engineering Study Program Trisakti University Jakarta Indonesia

Oil and natural gas are energy resources with high demand, so it is very important to implement enhanced oil recovery technology in old fields to obtain optimum oil production. The enhanced oil recovery technology that will be discussed on this occasion is more specifically related to the gas flooding method, namely nitrogen flooding. Nitrogen flooding is currently used more often as an alternative to CO2 flooding. However, the limitation of this method is that it is only effective when used in a field with a high depth, because it requires a constant high pressure and temperature so that this gas can dissolve into the reservoir fluid. Therefore, it is necessary to conduct a more in-depth study of the nitrogen flooding method, so that its application can get optimal, efficient, and economical results. The results of laboratory research were carried out to study the displacement of crude oil using the high pressure nitrogen injection method. It aims to study the effect of temperature and GOR on crude oil recovery and the solubility process in high pressure nitrogen injection. In addition, the effectiveness of nitrogen injection after water flooding, and the effect of propane slug driven by nitrogen injection were also analyzed. There are nine types of experiments carried out using crude oil 42.3° API which is recombined with natural gas. This experiment used two temperatures, 70° F and 120° F, and three GORs, namely 575 scf/stb, 400 scf/stb, and 200 scf/stb. The reservoir model used was a stainless steel tube 125 feet long and 0.435 inches in diameter, packed with consolidated sand to provide an average permeability of 910 mD. The recovery factor in nitrogen injection is influenced by the gas content in the system. If the gas content is high, then nitrogen injection will result in a higher oil recovery compared to conditions where the gas content is low.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：