检索结果-内蒙古大学图书馆

Risk-Targeted Design Spectra for Uniform Risk Seismic Design

Seismological Research Letters 2025年第3期96卷 1820-1833页

作者： Wang, Cong Lu, Da-Gang Key Laboratory of Building Structural Retrofitting and Underground Space Engineering Ministry of Education Shandong Jianzhu University Jinan China Key Laboratory of Structural Dynamic Behaviors and Control Ministry of Education Harbin Institute of Technology Harbin China

The uniform hazard response spectrum only considers the seismic hazard of a site, without taking into account the seismic fragility of the structure. As a result, structures designed based on this spectrum may exhibit varying levels of collapse risk under earthquakes in different regions. To this end, first, various cases are employed to determine a first-order approximation of the seismic hazard function H(x), followed by a validation of its rationality. Subsequently, with the objective of achieving uniform collapse risk, considering both seismic hazard and structural fragility, single anchor point, double anchor points, and multiple anchor points methods are proposed to construct the risk-targeted seismic design spectra for frequent earthquake (FE), design basis earthquake (DBE), maximum considered earthquake (MCE), and very rare earthquake (VRE). Furthermore, a comprehensive study is conducted to analyze the risk-targeted seismic design spectra corresponding to different seismic design levels, site classes, and characteristic periods constructed using the multiple anchor points method. In addition, a comparative analysis is conducted on the risk-targeted seismic design spectra constructed using different methods. The study indicates that determining H(x) based on DBE and VRE is reasonable, and the relative difference between the risk-targeted ground motion (RTGM) derived from this case and the RTGM obtained by determining H(x) based on probabilistic seismic hazard analysis is within 4%. The risk-targeted seismic design spectra constructed using three different methods show overall similarity. The single anchor point method offers simplicity in calculations and ensures that the uniform risk seismic design spectrum aligns with the uniform hazard seismic design spectrum in terms of spectral shape. Although the multiple anchor points method involves increased computational effort, it allows for the consideration of seismic hazard at multiple periods. © Seismological

关键词： Risk assessment

来源：评论

学校读者我要写书评

暂无评论

Seismic fragility analysis of three-tower cable-stayed bridges with different connection configurations

引用

Earthquake Engineering and Engineering Vibration 2024年第4期23卷 1009-1027页

作者： Chen Chen Liu Jinlong Lin Junqi Li Suchao Key Laboratory of Earthquake Engineering and Engineering Vibration Institute of Engineering MechanicsChina Earthquake AdministrationHarbin 150080China Key Laboratory of Earthquake Disaster Mitigation Ministry of Emergency ManagementHarbin 150080China Key Laboratory of Structural Dynamic Behavior and Control Ministry of EducationHarbin Institute of TechnologyHarbin 150090China

Seismic fragility analysis of three-tower cable-stayed bridges with three different structural systems,including rigid system(RS),floating system(FS),and passive energy dissipation system(PEDS),is conducted to study the effects of connection configurations on seismic responses and *** element models of bridges are established using OpenSees.A new ground motion screening method based on the statistical characteristic of the predominant period is proposed to avoid irregular behavior in the selection process of ground motions,and incremental dynamic analysis(IDA)is performed to develop components and systems fragility *** effects of damper failure on calculated results for PEDS are examined in terms of seismic response and fragility *** results show that the bridge tower is the most affected component by different structural *** RS,the fragility of the middle tower is significantly higher than other components,and the bridge failure starts from the middle tower,exhibiting a characteristic of local *** FS and PEDS,the fragility of the edge tower is higher than the middle *** system fragility of RS is higher than FS and *** the failure of dampers into account is necessary to obtain reliable seismic capacity of cable-stayed bridges.

关键词： seismic fragility cable-stayed bridge connection configuration viscous damper comparison analysis

来源：评论

学校读者我要写书评

暂无评论

Chemically bonded multi-nanolayer inorganic aerogel with a record-low thermal conductivity in a vacuum

引用

National Science Review 2023年第10期10卷 96-105页

作者： Hongxuan Yu Menglin Li Yuanpeng Deng Shubin Fu Jingran Guo Han Zhao Jianing Zhang Shixuan Dang Pengyu Zhang Jian Zhou Dizhou Liu Duola Wang Chuanwei Zhang Menglong Hao Xiang Xu Key Lab of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology and Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of Technology Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education School of Energy and EnvironmentSoutheast University Key Lab of Aerospace Bearing Technology and Equipment of the Ministry of Industry and Information Technology Harbin Institute of Technology

Inorganic aerogels have exhibited many superior characteristics with extensive applications,but are still plagued by a nearly century-old tradeoff between their mechanical and thermal *** reducing thermal conductivity by ultralow density,inorganic aerogels generally suffer from large fragility due to their brittle nature or weak joint crosslinking,while enhancing the mechanical robustness by material design and structural engineering,they easily sacrifice thermal insulation and ***,we report a chemically bonded multi-nanolayer design and synthesis of a graphene/amorphous boron nitride aerogel to address this typical tradeoff to further enhance mechanical and thermal *** to the chemically bonded interface and coupled toughening effect,our aerogels display a low density of 0.8 mg cm-3with ultrahigh flexibility（elastic compressive strain up to 99% and bending strain up to 90%）,and exceptional thermostability（strength degradation <3% after sharp thermal shocks）,as well as the lowest thermal conductivities in a vacuum(only 1.57 mW m-1K-1at room temperature and 10.39 mW m-1K-1at500℃) among solid materials to *** unique combination of mechanical and thermal properties offers an attractive material system for thermal superinsulation at extreme conditions.

关键词： inorganic aerogels multi-nanolayer mechanical-thermal tradeoff flexibility thermal superinsulation

来源：评论

学校读者我要写书评

暂无评论

Predicting the capacity of perfobond rib shear connector using an ANN model and GSA method

引用

Frontiers of structural and Civil Engineering 2022年第10期16卷 1233-1248页

作者： Guorui SUN Jun SHI Yuang DENG School of Civil Engineering Central South UniversityChangsha 410075China Key Laboratory of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of TechnologyHarbin 150090China National Engineering Laboratory for High-Speed Railway Construction Changsha 410075China

Due to recent advances in the field of artificial neural networks(ANN)and the global sensitivity analysis(GSA)method,the application of these techniques in structural analysis has become feasible.A connector is an important part of a composite beam,and its shear strength can have a significant impact on structural *** this paper,the shear performance of perfobond rib shear connectors(PRSCs)is predicted based on the back propagation(BP)ANN model,the Genetic Algorithm(GA)method and GSA method.A database was created using push-out test test and related references,where the input variables were based on different empirical formulas and the output variables were the corresponding shear *** results predicted by the ANN models and empirical equations were compared,and the factors affecting shear strength were examined by the GSA *** results show that the use of ANN model optimization by GA method has fewer errors compared to the empirical ***,penetrating reinforcement has the greatest sensitivity to shear performance,while the bonding force between steel plate and concrete has the least sensitivity to shear strength.

关键词： perfobond rib shear connector shear strength ANN model global sensitivity analysis

来源：评论

学校读者我要写书评

暂无评论

A dual⁃parameter method for seismic resilience assessment of buildings

引用

Journal of Southeast University(English Edition) 2025年第1期41卷 1-11页

作者： LI Shuang HU Binbin LIU Wen ZHAI Changhai Key Laboratory of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of TechnologyHarbin 150090China Key Laboratory of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology Harbin Institute of TechnologyHarbin 150090China

To quantify the seismic resilience of buildings,a method for evaluating functional loss from the component level to the overall building is proposed,and the dual-parameter seismic resilience assessment method based on postearthquake loss and recovery time is improved.A threelevel function tree model is established,which can consider the dynamic changes in weight coefficients of different category of components relative to their functional *** networks are utilized to quantify the impact of weather conditions,construction technology levels,and worker skill levels on component repair time.A method for determining the real-time functional recovery curve of buildings based on the component repair process is *** a three-story teaching building as an example,the seismic resilience indices under basic earthquakes and rare earthquakes are *** results show that the seismic resilience grade of the teaching building is comprehensively judged as GradeⅢ,and its resilience grade is more significantly affected by postearthquake *** proposed method can be used to predict the seismic resilience of buildings prior to earthquakes,identify weak components within buildings,and provide guidance for taking measures to enhance the seismic resilience of buildings.

关键词： seismic resilience assessment dual-parameter method functional loss recovery time Bayesian networks

来源：评论

学校读者我要写书评

暂无评论

Research on experimental similarity criterion and snowdrifts on two-span single-pitch roofs 20th

Research on experimental similarity criterion and snowdrifts...

引用

20th fib Symposium on ReConStruct: Resilient Concrete Structures, 2024

作者： Zhang, Qingwen Wang, Yongsuo Zhang, Guolong Zhang, Yu Fan, Feng Key Laboratory of Structures Dynamic Behavior and Control of China Ministry of Education Harbin Institute of Technology Harbin150090 China Key Laboratory of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology Harbin Institute of Technology Harbin150090 China China Telecom Corporation Limited Beijing Branch Beijing100032 China

ISBN: (纸本)9782940643257

Extreme blizzards have been striking the world, causing widespread building collapses. Among them, two-span roofed structures are vulnerable to snowdrifts due to the overloaded snow accumulated in the valley area. Considering the widely use of such roof in concrete structures, deep research of snowdrifts on two-span single-pitch roofs were conducted based on the snow-wind combined experiment facility and a new similarity criterion. Firstly, a snowfall-process-based experiment facility and a new Froude similarity number were proposed. The experiment facility is an open wind tunnel, which could simulate the snowfall process by spraying the artificial snow particles into the manmade flow field. The Froude number was revised based on the friction velocity ratio, which could better restore the snow drifting process. Through systematic validation, their reliability in predicting snowdrifts was fully proved. Then, a series of wind tunnel tests of snowdrifts on two-span single-pitch roofs were conducted with various inflow conditions and roof shapes. The results show that the snow distribution pattern on the roof is mainly determined by the roof slope. While for each type of roof slope, the wind velocity has little effect on the snow distribution. As for the wind direction, two types of typical unbalanced distribution of snow on the roof were observed. © fédération internationale du béton (fib).

关键词： Wind tunnels

来源：评论

学校读者我要写书评

暂无评论

Effect of trigger system on experimental dispersion characteristics of active surface wave testing

引用

Earthquake Engineering and Engineering Vibration 2024年第2期23卷 311-318页

作者： Lin Shibin Jeramy C.Ashlock Zhu Liming Qin Zexiang Li Bo Zhu Xingji Zhai Changhai State Key Laboratory of Precision Blasting Jianghan UniversityWuhan 430056China Hubei Key Laboratory of Blasting Engineering Jianghan UniversityWuhan 430056China Department of Civil Construction&Environmental EngineeringIowa State UniversityAmesIA 50010USA Wuhan Airport Road Development Co. Ltd.Wuhan 430065China School of Civil and Environmental Engineering Harbin Institute of TechnologyShenzhen 518055China Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of TechnologyHarbin 150090China Key Lab of Smart Prevention and Mitigation of Civil Engineering Disaster of the Ministry of Industry and Information Technology Harbin Institute of TechnologyHarbin 150090China

A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data *** effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is *** study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical ***,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is *** active surface wave testing cases are considered to validate the theory and *** results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.

关键词： site investigation surface waves data acquisition dispersion

来源：评论

学校读者我要写书评

暂无评论

引用

Physical Review Fluids 2024年第5期9卷 054608-054608页

作者： Xue-Lu Xiong (熊雪露) Shujin Laima (赖马树金) Hui Li (李惠) Yi Zhou (周毅) School of Energy and Power Engineering Key Lab of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Guangdong-Hong Kong-Macao Joint Laboratory for Data-Driven Fluid Mechanics and Engineering Applications

This paper presents a quadrant analysis of turbulent rotor wakes, placing a particular emphasis on the self-similarity in single-point turbulent statistics. The self-similarity analysis reveals that within the wake self-similar region, the distribution of the Reynolds shear stress −u′v′¯ and the turbulent kinetic energy k in different quadrants can also attain a state of self-similarity. The length scaling is the same for −u′v′¯, k, and their different quadrant contributions. However, the velocity scaling of the ejection contribution differs from that of −u′v′¯ and k. Additionally, the analysis of hole filtering and spectrum filtering effects on the self-similarity and scaling of the ejection contribution to −u′v′¯ reveals a strong connection between ejection events and large-scale coherent structures, as well as deceleration extreme events. This finding is further confirmed through quadrant analysis of the time evolution of velocity fluctuations. The present study can be helpful in improving our understanding of the turbulent wake self-similarity.

关键词： Shear flows Wakes & jets

来源：评论

学校读者我要写书评

暂无评论

A Silicon Monoxide Lithium-Ion Battery Anode with Ultrahigh Areal Capacity

引用

Nano-Micro Letters 2022年第3期14卷 229-243页

作者： Jiang Zhong Tao Wang Lei Wang Lele Peng Shubin Fu Meng Zhang Jinhui Cao Xiang Xu Junfei Liang Huilong Fei Xidong Duan Bingan Lu Yiliu Wang Jian Zhu Xiangfeng Duan State Key Laboratory for Chemo/Biosensing and Chemometrics College of Chemistry and Chemical EngineeringSchool of Physics and ElectronicsHunan Key Laboratory of Two‑Dimensional MaterialsEngineering Research Center of Advanced Catalysis of the Ministry of EducationHunan UniversityChangsha 410082People’s Republic of China International Graduate School at Shenzhen Tsinghua UniversityShenzhen 518057People’s Republic of China Key Laboratory of Structures Dynamic Behavior and Control of the Ministry of Education Key Laboratory of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information TechnologyHarbin Institute of TechnologyHarbin 150090People’s Republic of China School of Energy and Power Engineering North University of ChinaTaiyuan 030051People’s Republic of China Department of Chemistry and Biochemistry University of CaliforniaLos AngelesCA 90095USA

Silicon monoxide(SiO)is an attractive anode material for next-generation lithium-ion batteries for its ultra-high theoretical capacity of 2680 mAh g−*** studies to date have been limited to electrodes with a rela-tively low mass loading(<3.5 mg cm^(−2)),which has seriously restricted the areal capacity and its potential in practical *** areal capacity with such high-capacity materials is critical for capitalizing their potential in practi-cal ***,we report a monolithic three-dimensional(3D)large-sheet holey gra-phene framework/SiO(LHGF/SiO)composite for high-mass-loading *** specifically using large-sheet holey graphene building blocks,we construct LHGF with super-elasticity and exceptional mechanical robustness,which is essential for accommodating the large volume change of SiO and ensuring the structure integrity even at ultrahigh mass ***,the 3D porous graphene network structure in LHGF ensures excellent electron and ion *** systematically tailoring microstructure design,we show the LHGF/SiO anode with a mass loading of 44 mg cm^(−2)delivers a high areal capacity of 35.4 mAh cm^(−2)at a current of 8.8 mA cm^(−2)and retains a capacity of 10.6 mAh cm^(−2)at 17.6 mA cm^(−2),greatly exceeding those of the state-of-the-art commercial or research ***,we show an LHGF/SiO anode with an ultra-high mass loading of 94 mg cm^(−2)delivers an unprecedented areal capacity up to 140.8 mAh cm^(−2).The achievement of such high areal capacities marks a critical step toward realizing the full potential of high-capacity alloy-type electrode materials in practical lithium-ion batteries.

关键词： Silicon monoxide Large-sheet holey graphene Lithium-ion batteries High mass loading Ultra-high areal capacity

来源：评论

学校读者我要写书评

暂无评论

A novel porous shock absorption layer for tunnels: Shock absorption performance and parameter analysis

引用

Earthquake Engineering and Engineering Vibration 2025年第2期24卷 437-450页

作者： Zhou Tonglai Dong Changsong Li Shuang Sun Qiangqiang Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education Harbin Institute of TechnologyHarbin 150090China Key Lab of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology Harbin Institute of TechnologyHarbin 150090China State Key Laboratory of Green and Long-Life Road Engineering in Extreme Environment CCCC First Highway Consultants Co.Ltd.Xi’an 710075China Institute of Geotechnical Engineering College of Civil Engineering and ArchitectureHebei UniversityBaoding 017002China

A novel porous shock absorption layer is put forward in this study, and the shock absorption performance of the porous shock absorption layer is evaluated based on three-dimensional pseudo-static analysis. The modified reaction acceleration method is adopted and validated in the three-dimensional model. Seven ground motions are selected and the peak ground acceleration is adjusted to 0.2 g, 0.4 g and 0.6 g. The impact of the void ratio and thickness of the porous shock absorption layer is studied, while the surrounding rock grade and tunnel depth are also investigated. The numerical results show that the porous shock absorption layer has good shock absorption performance and can effectively reduce the maximum internal force of the secondary lining, but it cannot reduce the maximum horizontal relative displacement of the secondary lining. The circumferential rubber strip in the porous shock absorption layer will reduce shock absorption performance. The results of parameter analysis indicate that the shock absorption performance of the porous shock absorption layer increases with the increase of the void ratio and thickness, and it has good shock absorption performance under different surrounding rock grades and tunnel depths.

关键词： tunnel porous shock absorption layer shock absorption performance reaction acceleration method parameter analysis

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：