检索结果-内蒙古大学图书馆

Thermal-Hydraulic Calculation and Analysis on Evaporator System of a 1000 MW Ultra-Supercritical Pulverized Combustion Boiler with Double Reheat

引用

Journal of Thermal Science 2021年第3期30卷 807-816页

作者： WAN Li YANG Dong ZHOU Xihong DONG Le LI Juan State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

A double reheat ultra-supercritical boiler is an important development direction for high-parameter and large-capacity coal-fired power plants due to its high thermal efficiency and environmental *** has developed a 1000 MW double reheat ultra-supercritical boiler with steam parameters of 35 MPa at 605℃/613℃/613℃.Reasonable water wall design is one of the keys to safe and reliable operation of the *** order to examine the thermal-hydraulic characteristics of the double reheat ultra-supercritical boiler,the water wall system was equivalent to a flow network comprising series-parallel circuits,linking circuits and pressure nodes,and a calculation model was built on account of the conservation equations of energy,momentum and *** the iterative solving of nonlinear equations,the prediction parameters of the water wall at boiler maximum continue rate(BMCR),75%turbine heat-acceptance rate(THA)and 30%THA loads,including total pressure drops,flow distribution,outlet steam temperatures,fluid and metal temperatures were *** results of calculation exhibit excellent thermal-hydraulic characteristics and substantiate the feasibility of the water wall design of the double reheat ultra-supercritical boiler.

关键词： double reheat ultra-supercritical boiler water wall flow network method thermal-hydraulic characteristic

来源：评论

学校读者我要写书评

暂无评论

Changing Conditions and Thermodynamic Transient Characterization of Therminol VP-1 Oil-Water Heat Exchanger

Changing Conditions and Thermodynamic Transient Characteriza...

引用

2024 Boao New power System International Forum - power System and New Energy Technology Innovation Forum, NPSIF 2024

作者： Dong, Shuai Zheng, An Wang, Peng Wang, Chaoyang Huaneng Yimin Coal-Power Co. Ltd. Hulunbuir China Xi'an Jiaotong University State Key Laboratory of Multiphase Flow in Power Engineering Xi'an710049 China

ISBN: (纸本)9798331504557

In this paper, the exergy efficiency of high-pressure heater feedwater in a coal-fired power generation thermal system heated with Therminol VP-1 as the thermal fluid is investigated, and the transient characteristics of the heat exchanger are analyzed after changes in heat transfer oil parameters. The results show that the exergy efficiency of Therminol VP-1 for heating feedwater tends to decrease as the unit load decreases. The exergy efficiency for heating high pressure heater feedwater was 80% to 90%, with a maximum of 90.3%. The time required to reach the new steady state after perturbation of the boundary parameters of the oil-water heat exchanger increased with the load rate, with a minimum of 200 s and a maximum of 500 s in the study range. the new steady state was reached more quickly with increasing load than with decreasing load. © 2024 IEEE.

关键词： Exergy

来源：评论

学校读者我要写书评

暂无评论

Study on iterative algorithm of full plate cross-flow and counter-flow printed circuit heat exchanger for fluoride-salt-cooled high-temperature advanced reactor

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2023年第2期5卷 86-96页

作者： Li, Xinze Zhang, Dalin Li, Xinyu Tian, Wenxi Qiu, Suizheng Su, G.H. State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Laboratory of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

In the concept of Fluoride-Salt-cooled high-Temperature Advanced Reactor (FuSTAR), the Printed Circuit Heat Exchanger (PCHE) is mainly considered in its supercritical carbon dioxide (S–CO2) Brayton cycle secondary loop. The design of the PCHE is based on the property of working fluid provided by the Brayton cycle system design. Therefore, a fast and iterative PCHE design method is required. In this study, a mathematical model based on Picard's iterative method is proposed. The model can solve full plate temperature field with complex boundary conditions and initial values including cross-flow and counter-flow PCHE in parallel. Based on FuSTAR Brayton cycle design conditions, three sizes of cross-flow and counter-flow PCHEs are simulated respectively by the mathematical model. Compared with Computational Fluid Dynamics (CFD) models, a one and three-dimensional coupling model and a three-dimensional model, the mathematical model reduced the computing time from 1 to 10 h to 1–10 s, and the maximum temperature mean deviation is 18.6% for the smallest size case because of the edge effect and local disturbance, but 8.4% for other size. Taking secondary loop recuperator design as example, the computing speed and accuracy of the mathematical model can meet the design requirements of FuSTAR PCHE. © 2023 Xi'an Jiaotong University

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

The evaporation of nanoscale sodium liquid film on the non-ideal nanostructure surface: A molecular dynamics study

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2023年第1期5卷 1-8页

作者： Wang, Zetao Ye, Tianzhou Guo, Kailun Tian, Wenxi Qiu, Suizheng Su, Guanghui State Key Laboratory of Multiphase Flow in Power Engineering Shaanxi Key Lab of Advanced Nuclear Energy and Technology School of Nuclear Science and Technology Xi'an Jiaotong University Xi'an710049 China

The nanoscale liquid sodium film inside the microporous wick structure is of great importance to understanding the evaporation mechanism of the sodium heat pipe. The novel optimized wick structure is made of several layers of special screen. The surface of each screen exhibits a nanostructure type. Some non-ideal nanostructures may result from experimental faults or limits. And they will have an effect on the evaporation of film. In the present study, molecular dynamics is adopted to investigate this effect. The simulation system consists of the liquid sodium film and the solid surface. The flat surface is set as the reference. Based on the three non-ideal shapes of deposition, the sinusoidal nanostructures, conical nanostructures, and spherical nanostructures are built. The results indicate that the evaporation is suppressed by the above nanostructure surfaces. The weakening effect is through three forms: the potential gradient of the liquid film is intensified and the evaporation difficulty is increased;the heat transfer in the solid-liquid contact region is impeded;the collision heat transfer inside the liquid film is affected due to the delay of the aggregation variation between liquid atoms. © 2023 Xi'an Jiaotong University

关键词： Heat pipes

来源：评论

学校读者我要写书评

暂无评论

Effect of temperature on Lu’an bituminous char structure evolution in pyrolysis and combustion

引用

Frontiers in Energy 2021年第1期15卷 14-25页

作者： Yandi ZHANG Yinhe LIU Xiaoli DUAN Yao ZHOU Xiaoqian LIU Shijin XU State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

In the process of pyrolysis and combustion of coal particles, coal structure evolution will be affected by the ash behavior, which will further affect the char reactivity, especially in the ash melting temperature zone. Lu’an bituminous char and ash samples were prepared at the N_(2) and air atmospheres respectively across ash melting temperature. A scanning electron microscope (SEM) was used to observe the morphology of char and ash. The specific surface area (SSA) analyzer and thermogravimetric analyzer were respectively adopted to obtain the pore structure characteristics of the coal chars and combustion parameters. Besides, an X-ray diffractometer (XRD) was applied to investigate the graphitization degree of coal chars prepared at different pyrolysis temperatures. The SEM results indicated that the number density and physical dimension of ash spheres exuded from the char particles both gradually increased with the increasing temperature, thus the coalescence of ash spheres could be observed obviously above 1100℃. Some flocculent materials appeared on the surface of the char particles at 1300℃, and it could be speculated that β-Si_(3)N_(4) was generated in the pyrolysis process under N_(2). The SSA of the chars decreased with the increasing pyrolysis temperature. Inside the char particles, the micropore area and its proportion in the SSA also declined as the pyrolysis temperature increased. Furthermore, the constantly increasing pyrolysis temperature also caused the reactivity of char decrease, which is consistent with the results obtained by XRD. The higher combustion temperature resulted in the lower porosity and more fragments of the ash.

关键词： bituminous char pyrolysis ash structure evolution reactivity

来源：评论

学校读者我要写书评

暂无评论

Nanoparticle-induced drag reduction for polyacrylamide in turbulent flow with high Reynolds numbers

引用

Chinese Journal of Chemical engineering 2023年第4期56卷 290-298页

作者： Xiaoping Li Jiaxin Pan Jinwen Shi Yanlin Chai Songwei Hu Qiaorong Han Yanming Zhang Xianwen Li Dengwei Jing State Key Laboratory of Multiphase Flow in Power Engineering&International Research Center for Renewable Energy Xi'an Jiaotong UniversityXi'an 710049China Oil and Gas Technology Research Institute of Petrochina Changqing Oilfield Company Xi'an 710018China

Although having been increasingly studied, there is still controversy as to when the addition of nanoparticles could improve the drag reduction performance of polymer drag reducer and particularly what is the underlying mechanism from the fluid dynamics viewpoint. The drag reduction effects of adding SiO_(2) nanoparticles to various polymer polyacrylamide(PAM) solutions were examined in this *** optimal combination of SiO_(2) nanoparticles with cationic polyacrylamide was ***,the addition of SiO_(2) nanoparticles to cationic polyacrylamide solution was shown to be quite efficient for reducing drag, but only at higher flow rates with Reynolds numbers more than 6000, below which the nanoparticle addition is even negative. The addition of SiO_(2) nanoparticles to the PAM solution is supposed to play a dual role. The first is an increase in flow resistance caused by the Brownian motion of nanoparticles, while the second is a decrease in flow resistance caused by acting as nodes to protect the polymer chain from shear-induced breaking under high shear action. At optimal nanoparticle concentration and under higher Reynolds numbers, the later effect is dominant, which could improve the drag reduction performance of polymer drag reducers. Our work should serve as a guide for the application of natural gas fracturing, where the flow rate is frequently very high.

关键词： Drag reduction SiO_(2)nanoparticle Cationic polymer Brownian motion

来源：评论

学校读者我要写书评

暂无评论

Drag coefficient and volume fraction of bubbles in a supercritical water fluidized bed

引用

Particuology 2021年第4期19卷 127-138页

作者： Hao Wang Youjun Lu State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

The supercritical water fluidized bed(SCWFB)is a recently introduced reactor for biomass gasification that does not release *** groups of Geldart B-type quartz sands with different particle sizes were fluidized at a system pressure of 20-27 MPa and system temperature of 410-570℃.A series of experiments were performed for determining the drag coefficient and volume fraction of *** effects of the particles’size,superficial velocity,system pressure,and temperature on the drag coefficient and volume fraction are *** addition,a correlation between experimental and computed values is demonstrated for both the drag coefficient and volume fraction in *** relative error of the correlation is within±30%.The results of this study provide significant guidance for the scaling-up design of SCWFBs and for the development of supercritical water gasification technology.

关键词： Supercritical water fluidized bed Bubbles Drag coefficient Volume fraction

来源：评论

学校读者我要写书评

暂无评论

Numerical simulation of the drag and heat-transfer characteristics around and through a porous particle based on the lattice Boltzmann method

引用

Particuology 2021年第5期19卷 99-107页

作者： Mingyue Zhang Qiuyang Zhao Zujie Huang Lei Chen Hui Jin State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Porous particle flow is universal in nature and ***,in previous numerical simulations,porous particles have usually been assumed to be *** is necessary to study the flow and heat-transfer characteristics around porous particles because they are greatly different from those of impermeable *** this study,two-dimensional steady flow and heat transfer around and through a porous particle with a constant temperature placed in a cold fluid were numerically *** effects of the Reynolds number(Re)and Darcy number(Da)on the flow and heat-transfer characteristics were investigated in *** investigated ranges of the parameters were 10≤Re≤40 and 10^(−6)≤Da≤10^(−2).It is sophisticated to simulate porous particles with traditional simulation methods because of their complicated ***,the lattice Boltzmann method was used to solve the generalized macroscopic governing equations because of its *** drag coefficient decreased with increasing Re or Da,but the decrease was not prominent in the range 10^(−6)≤Da≤10^(−4).The heat-transfer efficiency of the front surface was much stronger than that of the rear *** heat-transfer efficiency between the particle and the fluid increased with increasing Re or ***,for 10^(−6)≤Da≤10^(−4),the increase was not prominent and the heat-transfer enhancement ratio was slightly larger than ***,the effect of Da became more prominent at larger *** addition,new correlations for the drag coefficient and surface-averaged Nusselt number were obtained based on the simulated results.

关键词： Porous particle Darcy-Brinkman-Forchheimer model flow and heat-transfer characteristics Lattice Boltzmann method Correlation

来源：评论

学校读者我要写书评

暂无评论

A Review on Thermal Design of Liquid Droplet Radiator System

引用

Journal of Thermal Science 2021年第2期30卷 394-417页

作者： CHONG Daotong ZHU Maoguo ZHAO Quanbin CHEN Weixiong YAN Junjie State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong UniversityXi'an 710049China

Liquid Droplet Radiator (LDR) system is regarded as a quite promising waste heat rejection system for aerospace engineering.A comprehensive review on the state-of-the-art of LDR system was carried *** thermal design considerations of crucial components such as working fluid,droplet generator and collector,intermediate heat exchanger,circulating pump and return pipe were *** state-of-the-art of existing mathematical models of radiation and evaporation characteristics of droplet layer from literatures were ***,thermal designs of three LDR systems were *** weight and required planform area between the rectangular and triangular LDR systems were respectively compared and the evaporation models for calculating the mass loss were *** on the review,some prospective studies of LDR system were put forward in this paper.

关键词： Liquid Droplet Radiator(LDR)system thermal design considerations radiative heat transfer evaporation loss

来源：评论

学校读者我要写书评

暂无评论

Research and development of helium-xenon Brayton cycle technology:A review

引用

National Science Open 2024年第6期3卷 188-218页

作者： Weixiong Chen Meihui Song Yiran Qian Hongxing Yu Junjie Yan State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China Key Laboratory of Nuclear Reactor System Design Technology Nuclear Power Institute of ChinaChengdu 610200China

Helium-xenon Brayton cycle systems have significant potential as the energy conversion system for small-scale reactors in remote land,deep-sea,and space applications due to a range of advantages,including high cycle efficiency,compact system structures,and chemical *** objective of this review is to provide a comprehensive understanding of the helium-xenon Brayton cycle system based on the projects and ***,the basic information and development history are introduced,and a series of typical designs are ***,the system configurations,cycle parameter analysis and optimization are ***,the key components are classified,such as turbine,compressor,and heat ***,the dynamic processes and control strategies are introduced in different ***,the deficiency and prospect of current research are *** review covers the representative helium-xenon Brayton cycle systems,which could provide a reference for promoting the development of energy conversion systems.

关键词： helium-xenon Brayton cycle cycle analysis heat exchanger dynamic research

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：