检索结果-内蒙古大学图书馆

ASME 2023 Heat Transfer Summer Conference, HT 2023

作者： Shuhan, Liu Ji’an, Liu Qingjiang, Liu Xianliang, Lei State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9780791887165

In the combined system of lead cooled fast reactor (LFR) and supercritical carbon dioxide (S-CO2) Brayton cycle, the intermediate heat exchanger plays a key role in the whole power system. However, the existing heat exchanger can not meet the trend of miniaturization of lead cooled fast reactor. Considering the thermo-physical properties and heat transfer behaviors in both S-CO2 and liquid lead bismuth eutectic (LBE) are significantly different, an asymmetric compact coupled heat exchanger learning from Honeycomb structure is proposed. Through numerical simulation, it is found that the thermal resistance mainly exists in the cold side. In order to enhance the heat transfer at the S-CO2 side, the fin tube is adopted at the cold side. The results show that the heat transfer performance and friction factor of the heat exchanger increase with the increase of fin height, width and number of fins due to the increase of heat transfer area. When the fin height is increased, PEC gradually increases at low inlet velocity, and then decreases at high inlet velocity;When the fin width is increased, PEC increases first and then decreases at low inlet velocity, and decreases gradually at high inlet velocity;With the increase of the number of fins, PEC showed an increasing trend at different inlet velocities. © 2023 by ASME.

关键词： Supercritical fluid extraction

来源：评论

学校读者我要写书评

暂无评论

Progress and challenge of functional single-atom catalysts for the catalytic oxidation of volatile organic compounds

引用

Chinese Chemical Letters 2024年第9期35卷 83-91页

作者： Zeyu Jiang Yadi Wang Changwei Chen Chi He Department of Environmental Science and Engineering Xi’an Jiaotong UniversityXi’an 710049China State Key Laboratory of Multiphase Flow in Power Engineering School of Energy and Power EngineeringXi’an Jiaotong UniversityXi’an 710049China National Engineering Laboratory for VOCs Pollution Control Material&Technology University of Chinese Academy of SciencesBeijing 101408China

The catalytic oxidation of volatile organic compounds(VOCs)is of considerable significance for the sustainable development of the chemical industry;thus,considerable efforts have been devoted to the exploration of efficient catalysts for use in this *** this regard,the development and utilization of single-atom catalysts(SACs)in VOCs decomposition is a rapidly expanding research *** can be employed as potential catalysts for oxidizing VOC molecules due to their optimal utilization efficiency,unique atomic bonding structures,and unsaturated *** has been achieved,while the challenges surrounding precise regulation of the microstructures of SACs for improving their low-temperature efficiency,stability,and product selectivity under practical conditions are ***,elucidating structure-performance relationships and establishing intrinsic modulating mechanisms are urgently required for guiding researchers on how to synthesize effective and stable functional SACs ***,recent advances in the design and synthesis of functional SACs for application in the catalytic oxidation of VOCs are *** experimental and theoretical studies revealing higher efficiency,stability,and selectivity of as-prepared functional SACs are being ***,the future perspectives in terms of promising catalysts with multi-sized composite active sites and the illustration of intrinsic mechanism are *** rapid intelligent screening of applicable SACs and their industrial applications are also discussed.

关键词： Single-atom catalysts VOCs catalytic oxidation Hydrocarbon activation Oxygen species transformation Surface chemistry Intrinsic mechanism

来源：评论

学校读者我要写书评

暂无评论

NUMERICAL SIMULATION OF FLUID-STRUCTURE COUPLING FOR THE MAIN PUMP OF LEAD COOLED FAST REACTOR 30

NUMERICAL SIMULATION OF FLUID-STRUCTURE COUPLING FOR THE MAI...

引用

30th International Conference on Nuclear engineering, ICONE 2023

作者： Xiang, Zutao Li, Liangxing Zhao, Jiayuan Xu, Xiangyang State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an China

ISBN: (纸本)9784888982566

The main pump blades of lead cooled fast reactor have complex mechanical characteristics, and there are complex fluid-structure coupling problems in the structural analysis of the impeller. In this paper, CFX software is mainly used for numerical simulation to carry out one-way fluid-structure coupling research on the moving blade of the main pump. Generally, three kinds of materials as Ti3SiC2, T91 steel and 304 stainless steel are considered for the moving blade of main pump and the deformation distribution and equivalent stress distribution of the three models under the three moving blade materials are analyzed respectively. Finally, the modal analysis of the moving blade of the main pump is carried out. The results show that the resistance to deformation of moving blade made in Ti3SiC2 is better than those of T91 steel and 304 stainless steel;The equivalent stress on the pressure surface of Ti3SiC2 is slightly higher than those of T91 steel and 304 stainless steel, and the maximum equivalent stress on the pressure surface of moving blade occurs on the inner edge of the blade. This research can provide reference for the design of moving blades, and help to improve the service life of the main pump. © 2023 by JSME.

关键词： Numerical models

来源：评论

学校读者我要写书评

暂无评论

Base-or acid-assisted polystyrene plastic degradation in supercritical CO_(2)

引用

Waste Disposal and Sustainable Energy 2023年第2期5卷 165-175页

作者： Yanbing Liu Jinwen Shi Liuhao Mao Bingru Lu Xing Kang Hui Jin International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi’an Jiaotong University28 West Xianning RoadXi’an710049ShaanxiChina

Plastic has caused serious"white pollution"to the environment,and the highly inert characteristics of plastic bring a major challenge for *** fluids have unique physical properties and have been widely used in various *** this work,supercritical CO_(2)(Sc-CO_(2))with mild conditions was selected and assisted by NaOH/HCl solution to degrade polystyrene(PS)plastic,and the reaction model was designed using response surface methodology(RSM).It was found that,regardless of the types of assistance solutions,the factors affecting PS degradation efficiencies were reaction temperature,reaction time,and NaOH/HCl *** the temperature of 400℃,time of 120 min,and base/acid concentration of 5%(in weight),0.15 g PS produced 126.88/116.99±5 mL of gases with 74.18/62.78±5 mL of H2,and consumed 81.2/71.5±5 mL of CO_(2).Sc-CO_(2)created a homogeneous environment,which made PS highly dispersed and uniformly heated,thus promoting the degradation of ***,Sc-CO_(2)also reacted with the degradation products to produce new CO and more CH_(4)and C_(2)H_(x)(x=4,6).Adding NaOH/HCl solution not only improved the solubility of PS in Sc-CO_(2),but also provided a base/acid environment that reduced the activation energy of the reaction,and effectively improved the degradation efficiencies of *** short,degrading PS in Sc-CO_(2)is feasible,and better results are obtained with the assistance of base/acid solution,which can provide a reference for the disposal of waste plastics in the future.

关键词： Plastic degradation Polystyrene Supercritical CO_(2) NaOH HCl

来源：评论

学校读者我要写书评

暂无评论

Boosting photocatalytic hydrogen production via interfacial engineering over a Z-scheme core/shell heterojunction

引用

Nano Research 2023年第1期16卷 352-359页

作者： Bing Luo Jinghua Li Wei Wang Chaoqian Ai Haihan Zhang Yuxin Zhao Dengwei Jing School of Chemical Engineering and Technology Xi'an Jiaotong UniversityXi'an 710049China International Research Center for Renewable Energy&State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an 710049China

Designing high efficacy photocatalysts is a promising way to improve solar fuel production *** this work,we prepared a core/shell composite of loose ZnCr layered double hydroxide nanosheets modified CdS nanorods for efficient visible light driven photocatalytic hydrogen *** highest hydrogen production rate achieved 425.8μmol·h^(−1) without adding any noble metal cocatalyst under the visible light stimulus,which is 22.4 times that of 1 wt.%Pt-modified *** corresponding apparent quantum yield is 13.9%at 420 *** is revealed that the synergistic actions of the interfacial redox shuttle of Cr^(3+)/Cr^(δ+)and the interfacial electric field enable the efficient separation of photoinduced charge carriers between two components via a Z-scheme energy band ***,with the hydrogen evolution contribution of Zn^(2+),a remarkable improvement in photocatalytic performance was achieved in contrast to bare *** work provides an effective methodology to construct highly efficient and economically viable photocatalysts for solar H_(2)production and mechanistic study.

关键词： photocatalysis heterojunction interfacial engineering noble metal free hydrogen production

来源：评论

学校读者我要写书评

暂无评论

Heavy Metal Migration Characteristics of Co-Combustion between Sewage Sludge and High Alkaline Coal on Circulating Fluidized Bed

引用

Journal of Thermal Science 2022年第6期31卷 2178-2188页

作者： LI Yaode YANG Dong ZHOU Xihong DONG Le SUO Lihui SUN Wenbo State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi'an Jiaotong UniversityXi'an 710049China College of Energy&Power Engineering Northeast Electric Power UniversityJilin 132000China

The migration characteristics of heavy metals in co-combustion of sewage sludge and high alkali coal in circulating fluidized bed were studied by experiments and simulations. Temperature plays a crucial role in thermodynamic equilibrium distribution and migration characteristics of heavy metals. At the temperature range of 700℃-1200℃, Hg is completely gaseous and the proportion of Pb, Ni, and Cd in the gas phase is also high. As is mainly elemental in the system, and the proportion of Cr in the solid phase is large. Zn compounds are diverse and mostly solid materials. The volatility of Cu is not strong, and it will become gaseous when the temperature exceeds 1700℃. The proportion of heavy metals in the gas phase decreases as the excess air ratio increases. In an oxygen-rich atmosphere, most of Zn and Ni are converted to oxides;Pb and Cd are converted to crystalline silicate;Cu is converted to partial aluminate;Cr compound is decomposed to form Cr_(2)O_(3);they are good for the solidification and controlling of heavy metals. The elemental Hg is converted to HgCl_(2) and the elemental As is converted to AsCl_(3). Temperature also has a great influence on the volatilization rate of heavy metals. The higher the temperature, the shorter the time they reach the maximum volatility.

关键词： co-combustion heavy metal migration circulating fluidized bed sewage sludge high alkali coal

来源：评论

学校读者我要写书评

暂无评论

Review of spatial scale dispersion models (ATDMs) to simulate environmental dispersion and deposition of radionuclides and the overview of GIS coupling with dispersion models

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2024年第4期6卷 256-280页

作者： Muhammad, Hussaini Xuan, Wang Wang, Mingjun Su, Guanghui School of Nuclear Science and Technology Shanxi Key Laboratory of Advanced Nuclear Energy and Technology State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China Abuja Nigeria

Estimation of the radiological consequences including the calculation of radiation doses to the exposed population requires numerical evaluation of atmospheric radioactive releases from nuclear facilities under accidental scenarios for implementation of adequate protective and other response actions to prevent or minimize severe deterministic effects and reduce the probability of occurrence of stochastic effects. This paper reviews various state-of-the-art spatial scale atmospheric dispersion models, known as the ATDMs, designed to evaluate atmospheric transport, dispersion, and depositions of radionuclide emissions from release sources. The ATDMs (atmospheric transport, dispersion, and deposition models) reviewed in this paper are FLEXPART, CALPUFF, LADAS, RASCAL, RIMPUFF, and HotSpot. These ATDMs are increasingly applied to perform probabilistic radiological risk assessment, which is one of the IAEA safety requirements for site evaluation of new NPP, and the calculated doses can be used to establish EPZs, an underlying basis of emergency preparedness. The numerical approaches, modeling methodology, advantages, limitations, scope of applications, and research investigations performed using these models in radiological and other environmental impact assessments within their scope of applications are presented. GIS has been widely recognized as a technique applied to aid the modeling of pollutant dispersion and visualization of model outputs in a spatial context, among other benefits. In nuclear accident consequence evaluation, spatial data provides key information such as accident location, range of radiological contamination, population density, etc, which are very important. This demonstrates the high significance of GIS-ATDMs coupling. Therefore, an overview of the coupling of dispersion models with GIS is also highlighted. © 2025 Xi'an Jiaotong University

关键词： Risk assessment

来源：评论

学校读者我要写书评

暂无评论

Uncertainty analysis of molten corium In-Vessel Retention under External Reactor Vessel Cooling

引用

International Journal of Advanced Nuclear Reactor Design and Technology 2023年第4期5卷 159-167页

作者： Wu, Shihao Wang, Dong Zhang, Yapei Zhou, Yukun Tian, Wenxi Qiu, Suizheng Su, G.H. School of Nuclear Science and Technology Shaanxi Engineering Research Center of Advanced Nuclear Energy State Key Laboratory of Multiphase Flow in Power Engineering Xi'an Jiaotong University Xi'an710049 China

External Reactor Vessel Cooling (ERVC) is a key measure to realize molten corium In-Vessel Retention (IVR). The uncertainty of severe accident in core leads to the uncertainty of molten pool parameters in lower head, which may threat the reliability of successful implementation of IVR. In this study, an uncertainty analysis is employed to ensure the reliability of ERVC technology to IVR with the final two-layer molten pool configuration of AP1000.600 simulations are performed to determine the effect of five key parameters. As long as parameters are within high probability density range, lower head can remain intact, and safety margin is greater than 15 %. For influence level and correlation of parameters, the order on metal layer is: Decay heat > Fe mass > UO2 mass > Zr oxidation fraction > Emissivity of metal layer. The results can provide guidance for subsequent research direction and optimal design of mitigation measures. © 2024 Xi'an Jiaotong University

关键词： Uncertainty analysis

来源：评论

学校读者我要写书评

暂无评论

A direct polymeric carbon nitride/tungsten oxide Z-scheme heterostructure for efficient photocatalytic hydrogen generation via reforming of plastics into value-added chemicals

引用

Rare Metals 2024年第8期43卷 3771-3783页

作者： Rui-Zhe Wang Zhi Lin Yi-Qing Wang Kai-Ni Zhang Ge-Hong Zhang Jie Zhang Samuel S.Mao Shao-Hua Shen International Research Center for Renewable Energy State Key Laboratory of Multiphase Flow in Power EngineeringXi'an Jiaotong UniversityXi'an 710049China School of Civil and Architecture Engineering Xi'an Technological UniversityXi'an 710021China Department of Mechanical Engineering University of California at BerkeleyBerkeleyCA94720USA

To promote charge transfer and separation for efficient photocatalysis,a direct Z-scheme heterostructure was constructed by coupling polymeric carbon nitride(PCN) and WO_(3).Interestingly,the obtained PCN/WO_(3)Z-scheme heterostructure could photocataly tic ally produce hydrogen and value-added chemicals(e.g.,formate and acetate) by reforming of plastic polylactic acid(PLA) in alkaline aqueous *** optimizing WO_(3) contents and reaction conditions,the obtained PCN/WO_(3)heterostructure exhibits much increased photocatalytic activity for PLA photoreforming under visible light,with hydrogen evolution rate reaching 402.90 μmol·g~(-1)·h~(-1),which is 3.5 times that of *** is revealed that the Z-scheme charge transfer between PCN and WO_(3) mainly contributes to the promoted charge separation and thus the improved photocatalytic ***,with h+and·OH experimentally evidenced as the predominant active species,a possible reaction pathway for the reforming of PLA into value-added chemicals(e.g.,formate and acetate)over PCN/WO_(3) Z-scheme heterostructure is cleared by monitoring the reaction intermediates and *** work paves a carbon neutrality and scalable route toward the synergistical production of hydrogen and value-added chemicals by utilizing and recycling plastic waste.

关键词： Carbon nitride Z-scheme heterojunction Plastic waste conversion Photocatalytic H_(2)production Value-added chemicals

来源：评论

学校读者我要写书评

暂无评论

Laminar Flame Instability of n-Hexane,n-Octane,and n-Decane in Spherical Expanding Flames

引用

Journal of Thermal Science 2024年第3期33卷 1189-1199页

作者： YIN Geyuan HU Erjiang LI Xiaotian LV Xin HUANG Zuohua State Key Laboratory of Multiphase Flow in Power Engineering Xi’an Jiaotong UniversityXi’an710049China United Automotive Electronic Systems Co. LtdShanghai201206China Chongqing Changan Automobile Co. Ltd.Chongqing401120China

This paper focuses on the laminar flame instability of three high molecular weight n-alkanes,namely n-hexane,n-octane,and *** experiment was carried out in a constant volume combustion bomb to get the flame *** critical radius under different conditions was extracted using the image processing *** with the existing critical Peclet number theory,the dominant factors of flame instability under current conditions for three n-alkanes can be figured ***,the average cell size(equivalent cell radius,R_(cell))was extracted to provide quantitative analysis of the flame cellular structure,based on the method developed in this *** theoretical R_(cell)were also calculated and compared with the experimental results to validate the proposed method.

关键词： cellular instability equivalent cell radius critical Peclet number spherical flame

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：