检索结果-内蒙古大学图书馆

Parameter identification of a Linear Permanent Magnet motor using Particle Swarm Optimization

Parameter identification of a Linear Permanent Magnet motor ...

International Conference on electrical engineering/Electronics, computer, Telecommunications and Information Technology, ECTI-CON

作者： Tithiwat Therdbankerd Peerayot Sanposh Nattapon Chayopitak Hideaki Fujita Intelligent Mechatronics Automation Robotics and Control Laboratory Department of Electrical Engineering Kasetsart University Bangkok Thailand Industrial Control and Automation Laboratory National Electronics and Computer Technology Center Klong Luang Pathum Thani Thailand Department of Electrical and Electronic Engineering Tokyo Institute of Technology Meguro Tokyo Japan

ISBN: (纸本)9781424456062;9789746724913

Accurate and effective parameter identification is an important engineering task in high performance control system design. One emerging approach to effectively identify such nonlinear or dynamic unknown parameters is to use Particle Swarm Optimization (PSO) algorithm. Linear Permanent Magnet (LPM) motor is a high performance actuator employed in many applications that require direct linear motion without mechanical transmission for high acceleration and accurate positioning. Therefore, accurate motor parameters are necessary to effectively control the LPM motors. This paper proposes a simple PSO based method with chirp inputs to identify the LPM motor's parameters. The simulations and experiments are conducted to verify the results and determine the effectiveness of the proposed method.

关键词： Parameter estimation Permanent magnet motors Particle swarm optimization Synchronous motors Signal processing Robotics and automation Chirp Intelligent robots control systems Laboratories

来源：评论

学校读者我要写书评

暂无评论

Prediction of financial time series with recurrent LoLiMot (locally linear model tree)

Prediction of financial time series with recurrent LoLiMot (...

引用

International Conference on computer and Automation engineering, ICCAE

作者： Hossein Chegini Caro Lucas Science and research Branch/Computer Science Islamic Azad university of Tehran Tehran Iran Electrical and Computer Engineering Department Control and Intelligent Processing Center of Excellence University of Tehran Tehran Iran

ISBN: (纸本)9781424455690

The tolerance and non-stability in financial indexes make changes to other sub-systems like human resources, economics, factory productions and etc. Having underling knowledge and a model to simulate such systems obtains a fine vision to estimate further and calculate hard-decision making tasks before execution like: dept from banks, cash injecting and insurance services. Using Neuro-fuzzy networks are one of the most powerful tools for this estimation. The particular locally linear model type of these networks called LoLiMot are in interest because of their linear training and construction optimization. These network can be much efficient when be a recurrent network why can better capture the dynamism's order of dynamic processes. The Locally linear Neuro-Fuzzy model (LoLiMot) here is as basis for making recurrent. In this paper this network with a global state feedback is implemented and the accuracy and the results of this recurrent network on Dow Jones index as a financial time series are compared with the static LoLiMot. The obtained results were better.

关键词： Predictive models State feedback Neurons Output feedback Power system modeling Gaussian processes control engineering computing Process control Intelligent control computer science

来源：评论

学校读者我要写书评

暂无评论

Global Stabilization of the Double Integrator System With Saturation and Delay in the Input

引用

IEEE Transactions on Circuits and Systems I: Regular Papers 2010年第6期57卷 1371-1383页

作者： Bin Zhou Guangren Duan Zongli Lin Center for Control Theory and Guidance Technology Harbin Institute of Technology Harbin P. R. China Charles L. Brown Department of Electrical and Computer Engineering University of Virginia Charlottesville VA USA

This paper is concerned with the problem of global stabilizing a double integrator system subject to actuator saturation and delay in the input. Two solutions to the problem are proposed by using linear state feedback which are parameterized in a single scalar γ. The first solution is delay-dependent in the sense that the delay information is directly used in the feedback design. The second solution is delay-independent as the delay information is not directly used in the feedback. Ranges of the value of the free parameter γ are established within which the closed-loop system is globally asymptotically stable. A numerical example is used to illustrate the effectiveness of the proposed approach.

关键词： Delay control systems Actuators Systems engineering and theory Linear systems State feedback Nonlinear systems control design Degradation Regulators

来源：评论

学校读者我要写书评

暂无评论

Impulse response invariant discretization of a generalized commensurate fractional order filter

Impulse response invariant discretization of a generalized c...

引用

World Congress on Intelligent control and Automation (WCICA)

作者： Yan Li Hu Sheng YangQuan Chen School of Control Science and Engineering Shandong University Jinan China Department of Electronic Engineering Dalian University of Technology Dalian China Center for Self-Organizing and Intelligent Systems (CSOIS) Department of Electrical and Computer Engineering Utah State University Logan UT USA

In this paper, we derive the impulse response of a generalized commensurate fractional-order filter of the form (s 2α +as α +b) -γ , where a, b ≥ 0, α ∈ (0, 1] and γ ∈ (0, 1). The asymptotic properties of the impulse responses are obtained. Moreover, based on the derived analytical impulse response, we show how to perform the discretization of the above fractional-order filter. Finally, a number of illustrated examples in time and frequency domains are provided as proofs of concepts.

关键词： Laplace equations Fractional calculus Frequency response Equations Time frequency analysis Time domain analysis

来源：评论

学校读者我要写书评

暂无评论

Feature selection and classification of breast cancer on dynamic Magnetic Resonance Imaging by using artificial neural networks

Feature selection and classification of breast cancer on dyn...

引用

Iranian Conference of Biomedical engineering (ICBME)

作者： Farzaneh Keivanfard Mohammad Teshnehlab Mahdi Aliyari Shoorehdeli Ke Nie Min-Ying Su Electrical and Computer Engineering Department Khaje Nasir Toosi University of Technology Tehran Iran Electrical and Computer Engineering Department Advanced Process Automation and Control (APAC) Khaje Nasir Toosi University of Technology Tehran Iran Center for Functional Onco-Imaging and Department of Radiological Sciences University of California Irvine CA USA

In this paper, a new feature selection and classification methods based on artificial neural network are applied to classify breast cancer on dynamic Magnetic Resonance Imaging (MRI). The database including benign and malignant lesions is specified to select the features and classify with proposed methods. It is collected from 2004 to 2006. A forward selection method is applied to find the best features for classification. Moreover, artificial neural networks such as Multilayer Preceptron (MLP) neural network, Probabilistic Neural Network (PNN) and Generalized Regression Neural Network (GRNN) are applied to classify breast cancer into two groups; benign and malignant lesions. Training and recalling neural networks are obtained with considering four-fold cross validation.

关键词： Fires Entropy Correlation Artificial neural networks Lesions Jacobian matrices Kinetic theory

来源：评论

学校读者我要写书评

暂无评论

Adaptive control of Flexible Structures using Residual Mode Filters

Adaptive Control of Flexible Structures using Residual Mode ...

引用

2010 49th IEEE Conference on Decision and control

作者： Mark J. Balas Susan A. Frost Department Head of the Department of Electrical and Computer Engineering University of Wyoming Laramie WY 82071 USA Intelligent Systems Division NASA Ames Research Center Moffett Field CA 94035 USA

ISBN: (纸本)9781424477456

Flexible structures containing a large number of modes can benefit from adaptive control techniques which are well suited to applications that have unknown modeling parameters and poorly known operating conditions. In this paper, we focus on a direct adaptive control approach that has been extended to handle adaptive rejection of persistent disturbances. We extend our adaptive control theory to accommodate troublesome modal subsystems of a plant that might inhibit the adaptive controller. In some cases the plant does not satisfy the requirements of Almost Strict Positive Realness. Instead, there maybe be a modal subsystem that inhibits this property. This section will present new results for our adaptive control theory. We will modify the adaptive controller with a Residual Mode Filter (RMF) to compensate for the troublesome modal subsystem, or the Q modes. Here we present the theory for adaptive controllers modified by RMFs, with attention to the issue of disturbances propagating through the Q modes. We apply the theoretical results to a flexible structure example to illustrate the behavior with and without the residual mode filter.

关键词： Flexible structures adaptive control adaptive controller mode filter adaptive control theory SUB-SYSTEM RESIDUAL control technology

来源：评论

学校读者我要写书评

暂无评论

Sensor data fusion using fuzzy control for VOR-based vision tracking system

Sensor data fusion using fuzzy control for VOR-based vision ...

引用

2010 IEEE/RSJ International Conference on Intelligent Robots and Systems

作者： Hyun-il Kwon Jaehong Park Wonsang Hwang Jong-hyeon Kim Chang-hun Lee M. Latif Anjum Kwang-soo Kim Dong-il Cho Automation and Systems Research Institute and School of Electrical Engineering and Computer Science Inter-University Semiconductor Research Center Seoul South Korea Department of Control and Instrumentation Engineering Hanbat National University Daejeon South Korea

This paper presents a vision tracking system to achieve high recognition performance under dynamic circumstances, using a fuzzy logic controller. The main concept of the proposed system is based on the vestibulo-ocular reflex (VOR) and the opto-kinetic reflex (OKR) of the human eye. To realize the VOR concept, MEMS inertial sensors and encoders are used for robot motion detection. This concept turns the camera towards a selected target, counteracting the robot motion. Based on the OKR concept, the targeting errors are periodically compensated, using vision information. The fuzzy logic controller uses sensor data fusion to detect slip or collision occurrences. To calculate a heading angle of the camera accurately, the output of the fuzzy logic controller and the vision information from the camera are combined, using an extended Kalman filter. The proposed vision tracking system is implemented in a mobile robot and evaluated experimentally. The experimental results are obtained as the tracking and the recognition success rate using a mobile robot. The developed system achieved the excellent tracking and recognition performance during slip or collision occurrences under dynamic circumstances.

关键词： Cameras Mobile robots Robot vision systems Machine vision Fuzzy logic

来源：评论

学校读者我要写书评

暂无评论

Flexible modes control using sliding mode observers: Application to Ares i

Flexible modes control using sliding mode observers: Applica...

引用

AIAA Guidance, Navigation, and control Conference

作者： Shtessel, Yuri B. Hall, Charles E. Baev, Simon Orr, Jeb S. University of Alabama in Huntsville Huntsville AL 35899 United States NASA MSFC Huntsville AL 35812 United States Georgia South Western State University Americus GA 31709 United States Science Applications International Corporation Huntsville AL 35802 United States Department of Electrical and Computer Engineering United States NASA Marshall Space Flight Center United States Department of Information Technology United States Space Systems Development Division United States

ISBN: (纸本)9781600869624

The launch vehicle dynamics affected by bending and sloshing modes are considered. Attitude measurement data that are corrupted by flexible modes could yield instability of the vehicle dynamics. Flexible body and sloshing modes are reconstructed by sliding mode observers. The resultant estimates are used to remove the undesirable dynamics from the measurements, and the direct effects of sloshing and bending modes on the launch vehicle are compensated by means of a controller that is designed without taking the bending and sloshing modes into account. A linearized mathematical model of Ares I launch vehicle was derived based on FRACTAL, a linear model developed by nasa/MSFC. The compensated vehicle dynamics with a simple PID controller were studied for the launch vehicle model that included two bending modes, two slosh modes and actuator dynamics. A simulation study demonstrated stable and accurate performance of the flight control system with the augmented simple PID controller without the use of traditional linear bending filters. Copyright © 2010 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.

关键词： Launch vehicles

来源：评论

学校读者我要写书评

暂无评论

Friction feedforward compensation and position feedforward in CNC machines

Friction feedforward compensation and position feedforward i...

引用

International Conference on electrical engineering/Electronics, computer, Telecommunications and Information Technology, ECTI-CON

作者： Wijin Suteeratanapirom Rapeepong Rattanawaorahirankul Chutima Laosapan Peerayot Sanposh Nattapon Chayopitak Kanokvate Tungpimolrut Hiroaki Kunieda TAIST Tokyo Technology China Intelligent Mechatronics Automation Robotics and Control Laboratory Department of Electrical Engineering Kasetsart University Bangkok Thailand Industrial Control and Automation Laboratory National Electronics and Computer Technology Center Klong Luang Pathum Thani Thailand Department of Electrical and Electronic Engineering Tokyo Institute of Technology Meguro Tokyo Japan

ISBN: (纸本)9781424456062;9789746724913

This research proposes a method to eliminate friction effect and reduced tracking error on CNC milling machines. A CNC milling machine has many connected mechanical components which have friction effects such as ball screws and rails. To control servo motors which are used to drive X-Y table in CNC milling machine, the conventional PID controller is widely used. In this research, Panasonic motor driver is set to the torque control mode. To compensate the friction effects, the friction feedforward compensation method is proposed. Moreover, to reduce the position tracking error, position feedforward controller is used. The simulation and implementation of position control in one axis of PID with Friction Feedforward Compensation and Position Feedforward controller (FFC-PFC) are presented.

关键词： Friction computer numerical control Metalworking machines Servomotors Three-term control Fasteners Rails Servomechanisms Torque control Error correction

来源：评论

学校读者我要写书评

暂无评论

A learning approach to optimize walking cycle of a passivity-based biped robot

A learning approach to optimize walking cycle of a passivity...

引用

International Conference on control, Automation, Robotics and Vision (ICARCV)

作者： Nima Fatehi Masoud Asadpour Adel Akbarimajd Laila Majdi Mechatronic Group Electrical and Computer Engineering Faculty Islamic Azad University Qazvin Iran Control and Intelligent Processing Center of Excellence Electrical Engineering Faculty University of Tehran Tehran Iran ECE Group Faculty of Engineering University of Mohaghegh Ardabil Iran Mechanical Department Islamic Azad University Tehran Iran

A learning mechanism based on Powell's optimization algorithm is proposed to optimize walking behavior of a passivity based biped robot. To this end, a passivity-based biped robot has been simulated in MSC ADAMS and a control policy inspired from humanoid walking is adopted for a stable walking of the robot. Linear controllers try to control the joints of robot in each walking phase to implement the gait proposed by the control policy. Learning is employed using Powell's optimization algorithm to adjust the control parameters so that the robot enters to an optimum limit cycle in a finite time. The fitness function is defined to evaluate the robot's optimum behavior. The results are verified by simulations in SIMULINK+ADAMS.

关键词： Legged locomotion Optimization Hip Joints Foot Leg

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：